Assignment Brief Submission & Resub

Sub. Re-Sub
x

LOs LO1 LO2

Grade “ Sub”
Not Achieved Not Achieved
Grade“Resub” P ” repeat unit”
P ” repeat unit”

Student Name: ID Number

Unit Number and Title: FAC 415 Computer Graphics

Qualification Bachelor of Technology in Autotronics Technology (Y4)
Academic Year: 2023/2024 Assessor Name: Assoc. Prof. Haytham ElZomor
Internal Verifier
Assignment Title: Parts Modelling Dr. Sherif AlHosary
Name:
Assignment No. 1 Issue Date: 11 / 11 / 2023
Submission Format: 11 / 11 / 2023
Softcopy Files Submission Date:
Type of Evidence (2Hrs)

STUDENT DECLARATION
Plagiarism
Plagiarism is a particular form of cheating. Plagiarism must be avoided at all costs and students who break the rules,
however innocently, may be penalised. It is your responsibility to ensure that you understand correct referencing
practices. As a university-level student, you are expected to use appropriate references throughout and keep
carefully detailed notes of all your sources of materials for material you have used in your work, including any
material downloaded from the Internet. Please consult the relevant unit lecturer or your course tutor if you need
any further advice.
Student Declaration
Student declaration
I certify that the assignment submission is entirely my own work and I fully understand the consequences of
plagiarism. I understand that making a false declaration is a form of malpractice.

Also, I acknowledge that I have received the feedback about my work from the assessor.

Student signature: Date: / /2023

FORMATIVE FEEDBACK

Assessor’s Formative Feedback: Confirm action completed:

Assessor Signature: Date: / /2023

IV assessment brief approval

IV’s signature: Date: / /2023

1
Learning Outcomes and Assessment Criteria:
Learning Outcome Pass Merit Distinction
LO1 Be able to P1 Use sketch-based features M1 Use CAD features D1 Create a 3D CAD
produce 3D
models using to create geometry. and reference model with advanced
Computer Aided P2 Use applied features to standards features to enhance
Design (CAD).
create solid models. configuration to the model.
P3 Use mathematical calculate the physical
calculation to solve reference properties of the 3D
geometry problems within the CAD model.
production of CAD models.
LO2 Be able to P4 Use the 3D CAD model to M2 Create detailed D2 Create engineering
produce 2D CAD
engineering create a range of views within engineering drawings drawings that conform
drawings. 2D engineering drawings. including section views. to any International
P5 Use the 3D CAD model to Standards.
create 2D engineering
drawings that include
appropriate dimensions and
annotations.

Scenario
Suppose you are a technologist in the Engineering department of an Automotive Feeding
Industry. During the phase of production of a vehicle, it was required to study the possibility of
manufacturing vehicle components. You need to select ONLY one component from the given
components “Connecting Rod or Wheel Rim” to perform the following:
Firstly, study the given components for functionality.
Secondly, use computer-aided design (CAD) software to model the given components in 3D
parts.
Finally, Produce a working drawing for the 3D CAD model with full annotations and according
to the mentioned International System.

Sources of information
• https://help.solidworks.com/
• SolidWorks Offline Help.

2
Task No.01

Your task is to select ONLY ONE component from below to:

1.1 Create a 3D CAD model for one of the given parts, using a
sketch-based feature.
1.2 Use the SolidWorks features to create a full 3D model for
the given component; save the model as “Part_1”.
1.3 Give evidence of where mathematical calculation has aided
the geometric development of the component within the
production of the CAD model.
1.4 Calculate the mass of the given component in grams using
the CAD software's physical properties, assume the
material is Aluminum Alloy 1060 of density 2700 kg/m3.
1.5 Enhance the 3D model using SolidWorks advanced features
(Revolve or Pattern or mirror).
1.6 Use the 3D model to create 2D drawings of the given
component; showing the standard views (Front – Right
Hand Side – Plan) with the appropriate scale on a size A3
sheet; save the file “Drawing_1.pdf”.
1.7 Include the appropriate dimensions and needed annotations
in the 2D drawing sheet.
1.8 Create a detailed drawing for the 3D model showing a
complete frontal section view.
1.9 create a working drawing for the 3D model using the
“Deutsches Institut für Normung” DIN Standard with an
appropriate scale and include annotations and dimensions;
save the file as “Drawing_2.pdf”.

3
4
 Higher Nationals - Summative Assignment Feedback Form
Student Name Student ID

Unit Title Computer Graphics

Assignment Number(x of y) 1 Assignment Title Parts Modelling

Assessor Summative Feedback: Feedback should be against the learning outcomes and assessment
criteria to help students understand how these inform the process of judging the overall grade. *should be
constructive and useful including:
- Feedback should give full guidance to the students on how they have met the learning outcomes and
assessment criteria

a) Strengths of performance

b) Limitations of performance

c) Any improvements needed in future assessments

Assessor Signature: Date: / /2023

. Actual Date Received Re-

Re-submission Date / /2023 / /2023
submission

Resubmission Feedback:
*Please note resubmission feedback is focussed only on the resubmitted work

Assessor Signature: Date: / /2023

Internal Verifier’s Comments:

Signature: Date: / /2023

* Please note that grade decisions are provisional. They are only confirmed once internal and external moderation
has taken place and grades decisions have been agreed at the assessment board.

Summative Assignment Feedback Form