S2500-P

SERIES
Varied Service
Characteristics Versatile
IPv6 Solution Complete
Carrier-Level High
Security Mechanism
Reliability
Layer-3 Routing
Advanced Hardware Functions
Architecture and
Industry-leading Port
Supports Maximum Density
24 GE PoE Ports
and 4 GE SFP Uplink
Ports
Product Characteristics
Carrier-Level Ethernet Access Switch
S2500-P Series supports the carrier-level Ethernet-
ring protection protocol with less than 50ms
recovery time , STP/RSTP/MSTP , backup uplink
ports, and LACP link aggregation to cater to the
requirements of high reliability of carriers;
Product Overview S2500-P Series has powerful ACL functions to
BDCOM S2500-P Series is a new-generation access and control L2-L7 data based on physical
intelligent PoE access switch designed for port, providing carriers flexible and various policy
carrier's IP MAN and enterprise networks. control methods;
Based on the new-generation high-performance
hardware and BDROS platform, it supports S2500-P Series supports In-Service Software
functions such as ACL, QinQ and QoS. Its simple Upgrade (ISSU) to ensure the unremitting data
management mode and flexible installation forwarding during system upgrade;
can meet the requirement of any complicated
scenarios; S2500-P Series supports various L2 multicast
functions such as IGMP-snooping, fast-leave and
BDCOM S2500-P Series has 3 models: S2510-P, MVR to fully meet the operation requirements of
S2520-P and S2528-P; carrier’s IPTV.

BDCOM S2500-P Series

1
Product Characteristics

Intelligent PoE+ Easy Management and Maintenance

S2500-P Series supports IEEE 802.3AF/AT PoE S2500-P Series supports many management
standard, and power mapping scales up to a modes such as the CLI, Telnet, SSH, SSL and SNMP;
maximum of 370W of PoE+ power;
S2500-P Series supports the WEB management
S2500-P Series supports PoE non-stop power mode, which is easy and efficient for installing and
supply. The PoE+ power is maintained during debugging the device;
a switch reload;
S2500-P Series supports FTP,TFTP and SFTP;
S2500-P Series supports manual and dynamic
PoE power allocation; S2500-P Series supports ISSU (In-Service Software
Upgrade);
S2500-P Series supports up to 2KV thunder-proof
of the PoE port and power supply; S2500-P Series supports SNMP and BDCOM
NMS smart network management platform. The
Enhanced QoS combination realizes automatic equipment
discovery, network topology management ,
equipment configuration management,
S2500-P Series supports priority retagging and
performance data statistics and analysis and
complicated flow classification based on VLAN,
trouble management;
MAC, source address, destination address, IP or
priority, better streamlining carrier’s services;
S2500-P Series supports Zero Touch Provisioning(ZTP)
function to minimize manual operator intervention
S2500-P Series provides flexible bandwidth
and helps reduce customers’ initial deployment
control policies, supporting port-/flow-based flow
costs.
limit, ensuring the line speed forwarding of each
port;

S2500-P Series supports multiple queue

schedule algorithms such as SP, WRR and “SP +
WRR”;

Security+

Equipment-level security: The advanced

hardware infrastructure design realizes the level-
based packet schedule and packet protection,
prevents DoS-/TCP- related SYN Flood, UDP
Flood, Broadcast Storm or large traffic attacks,
and supports level-based command line
protection, endowing different levels of users with
different management permissions.

Perfect security authentication mechanisms:

IEEE 802.1x, Radius and BDTacacs+.

S2500-P Series supports storm/multicast/unicast

limit, ensuring the normal running of equipment
in harsh network conditions.

S2500-P Series supports perfect ring detection

mechanism, ensuring the long-term stable running
of network.

S2500-P Series supports port isolation within the

same VLAN, DHCP-Snooping, and IP + MAC + Port
binding.

BDCOM S2500-P Series

2
Model Lists
S2510-P S2520-P S2528-P

8 GE PoE ports 16 GE PoE ports 24 GE PoE ports

2 100/1000M SFP ports 2 GE TX/SFP combo ports 4 GE TX/SFP combo ports
2 100/1000M SFP ports

Application Diagram

10G Fiber
GE Fiber
GP1501DT GP1704-4F GE Copper
xPON ONU xPON ONU

S2510-P
OS-1X16SCPC-U
L2+ managed Ethernet PoE switch
Chassis Splitters

GP3600-08 Internet
High-density Standalone
GPON OLT

GP1704-4F-E GP1704-4GVC-S
xPON ONU xPON ONU
S3740F S2528-P
L2+ managed Ethernet PoE switch
24 GE SFP ports
8 GE TX ports
8 10GE SFP+ ports

Full HD Camera

OS-1X16SCPC-U
Chassis Splitters

GP3600-16
High-density-Standalone
GPON OLT
S1510-8P-150
1000M PoE switch

BDCOM S2500-P Series

3
Product Specifications
Item S2510-P S2520-P S2528-P
Interface 8 GE PoE ports, 16 GE PoE ports, 24 GE PoE ports,
2 100/1000M SFP ports 2 GE TX/SFP combo ports 4 GE TX/SFP combo ports
2 100/1000M SFP ports
Console 1 RJ45 port, 1 RST button 1 RJ45 port, 1 RST button 1 RJ45 port, 1 RST button
Backplane 20 Gbps 40 Gbps 56 Gbps
Forwarding rate 15 Mpps 30 Mpps 42 Mpps
Chassis Dimensions 280x180x44 440x210x44 440x210x44
(WxDxH)(mm)
Weight(KG)(empty) 1.6 2.8 3
Package Dimensions 346x289x92 555x295x88 555x295x88
(WxDxH)(mm)
Weight(KG) 2.4 3.9 4.1
Power no-load <7W <15W <17W
consumption full-load 142.5W 261.4W 393.5W
Power supply AC: 100V-240V, 150W 265W 400W
50/60Hz
POE power budget 130 W 250W 370 W
Total output BTU (1000BTU/H=293W) 511.95 892.15 1365.19
Fan number / 2 2
Noise@25°C(dBA) 0 37.5 37.5
MTBF(H) >50,000 >50,000 >50,000
Forwarding mode Store-forward
Flash (MB) 16
DRAM (MB) 128
MAC 8K
Buffer size(MB) 4.1
Jumbo frame 9K
Total SVI 10

Features
VLAN QoS Reliability
· 4K Active VLAN, · CAR, HQoS, MAC/IP/TCP/UDP/ · Static/LACP link aggregation,
· QinQ & Selective QinQ, VLAN/COS/DSCP/TOS based Interface backup
· GVRP, Private VLAN, · QoS, 802.1P/DSCP priority re- · EAPS and ERPS
· Voice VLAN labeling, SP, WRR, and “SP+WRR”, · ISSU
· Tail-Drop, WRED, flow monitoring Management
Spanning Tree and traffic shaping · Console, Telnet,SSH v1/2,HTTP,
· 802.1D (STP),
HTTPS SNMP v1/v2/v3, RMON
· 802.1W(RSTP) and 802.1S(MSTP)
Security · TFTP, FTP, SFTP
· BPDU guard, root guard and
· Port isolation, Port security, and · NTP
loopback guard
“IP+MAC+port” binding, MAC · ZTP(Zero Touch Provisioning)
Multicast sticky DHCP Snooping and · SPAN, RSPAN
· IGMP v1/2/3 option 82, DAI & IP source guard, Accessories
· IGMP Snooping PPPoE+, · Power cord, rackmount kits,
· IGMP Fast Leave · IEEE 802.1x, Radius and BDTacacs+ console cable, anti-slipping pad
· IGMP Filter · L2/L3/L4 ACL flow identification
· MVR Environment
and filtration Anti-attack from
· Operating temperature/humidity:
DDoS, TCP’s SYN Flood, UDP
IP -10°C-50°C, 10%-90%
Flood, etc. non-condensing
· Static route
· RIP, OSPF · Broadcast/multicast/unknown · Storage temperature/humidity:
· 512 routing table unicast storm-control -20°C-70°C, 5%-90%
· IPv4/v6 dual stack · Md5, SHA-256, RSA-1024, AES256, non-condensing
· DHCP Server/Client/Relay etc.
Certification
· CE, FCC,ROHS

BDCOM S2500-P Series

4
Ordering Information

Item Description
S2500-P Series PoE Switches
S2510-P Ethernet PoE switch with 10 GE ports (1 console port, 8 GE PoE ports,
2 100/1000M SFP ports, 1 standard AC220V power supply, 150W , fanless,
1U, rack-mounted installation)

S2520-P Ethernet PoE switch with 20GE ports (1 console port, 16 GE PoE ports,
2 100/1000M SFP ports, 2GE TX/SFP combo ports, 1 standard AC220V power
supply, 265W, thecooling fan, 1U, standard 19-inch rack-mounted installation)

S2528-P Ethernet PoE switch with 28 GE ports (1 console port, 24 GE PoE ports,
4 GE TX/SFP combo ports, 1 standard AC220V power supply, 400W, the
cooling fan, 1U, standard 19-inch rack-mounted installation)

Optical Modules
100M Optical Modules
FSFP-SX-1310 100M SFP multi-mode (2Km, 1310nm, LC, DDM)
FSFP-LX-15 100M SFP single-mode (15Km, 1310nm, LC, DDM)
FSFP-LX-40 100M SFP single-mode (40Km, 1310nm, LC, DDM)
FSFP-ZX-80 100M SFP single-mode (80Km, 1550nm, LC, DDM)
FSFP-LX-SM1310-20-BIDI 100M SFP single-mode, single fiber (20Km, TX1310/RX1550, LC, DDM)
FSFP-LX-SM1550-20-BIDI 100M SFP single-mode, single fiber (20Km, TX1550/RX1310, LC, DDM)
FSFP-LX-SM1310-40-BIDI 100M SFP single-mode, single fiber (40Km, TX1310/RX1550, LC, DDM)
FSFP-LX-SM1550-40-BIDI 100M SFP single-mode, single fiber (40Km, TX1550/RX1310, LC, DDM)
FSFP-LX-SM1310-80-BIDI 100M SFP single-mode, single fiber (80Km, TX1310/RX1550, LC, DDM)
FSFP-LX-SM1550-80-BIDI 100M SFP single-mode, single fiber (80Km, TX1550/RX1310, LC, DDM)
GE Optical Modules
GSFP-TX-B GE SFP single-to-RJ45 module
GSFP-SX-D GE SFP multi-mode (500m, 850nm, LC, DDM)
GSFP-LX-10-D GE SFP single-mode (10Km, 1310nm, LC, DDM)
GSFP-LX-20-D GE SFP single-mode (20Km, 1310nm, LC, DDM)
GSFP-LX-40-D GE SFP single-mode (40Km, 1310nm, LC, DDM)
GSFP-ZX-80-D GE SFP single-mode (80Km, 1550nm, LC, DDM)
GSFP-ZX-120-D GE SFP single-mode (120Km, 1550nm, LC, DDM)
GSFP-LX-SM1310-10-BIDI GE SFP single-mode, single fiber (10Km, TX1310/RX1550, LC, DDM)
GSFP-LX-SM1550-10-BIDI GE SFP single-mode, single fiber (10Km, TX1550/RX1310, LC, DDM)
GSFP-LX-SM1310-20-BIDI GE SFP single-mode, single fiber (20Km, TX1310/RX1550, LC, DDM)
GSFP-LX-SM1550-20-BIDI GE SFP single-mode, single fiber (20Km, TX1550/RX1310, LC, DDM)
GSFP-LX-SM1310-40-BIDI GE SFP single-mode, single fiber (40Km, TX1310/RX1550, LC, DDM)
GSFP-LX-SM1550-40-BIDI GE SFP single-mode, single fiber (40Km, TX1550/RX1310, LC, DDM)
GSFP-LX-SM1490-80-BIDI GE SFP single-mode, single fiber (80Km, TX1490/RX1550, LC, DDM)
GSFP-LX-SM1550-80-BIDI GE SFP single-mode, single fiber (80Km, TX1550/RX1490, LC, DDM)
GSFP-LX-SM1490-120 GE SFP single-mode, single fiber (120Km, TX1490/RX1550, LC, DDM)
GSFP-LX-SM1550-120 GE SFP single-mode, single fiber (120Km, TX1550/RX1490, LC, DDM)

Copyright © Shanghai Baud Data Communication Co., Ltd. 2020. All Rights Reserved.
This document is BDCOM Public Information. BDCOM reserves the right to alter, update
and otherwise change the information contained in the document from time to time.

www.bdcom.cn