Scribd
Upload
7 views3 pages

Circuits Simulation Worksheet

The document is a circuits simulation worksheet for a 9th grade digital citizenship workshop taught by Mauricio López Núñez. It provides instructions on how to properly measure voltage, current, and resistance in a circuit. To measure voltage, the multimeter should be connected in parallel across the circuit without interrupting it. To measure current, the circuit needs to be interrupted by removing a wire and connecting the multimeter in series. And to measure resistance, the power supply needs to be turned off and the multimeter set to ohms and connected across the component.

Uploaded by

bisignanofranco949
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
7 views3 pages

Circuits Simulation Worksheet

The document is a circuits simulation worksheet for a 9th grade digital citizenship workshop taught by Mauricio López Núñez. It provides instructions on how to properly measure voltage, current, and resistance in a circuit. To measure voltage, the multimeter should be connected in parallel across the circuit without interrupting it. To measure current, the circuit needs to be interrupted by removing a wire and connecting the multimeter in series. And to measure resistance, the power supply needs to be turned off and the multimeter set to ohms and connected across the component.

Uploaded by

bisignanofranco949
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

GIMNASIO FONTANA

CIRCUITS SIMULATION WORKSHEET


DIGITAL CITIZENSHIP WORKSHOP 9TH
TEACHER: MAURICIO LÓPEZ NÚÑEZ
1. In a series circuits, the rigth way to measure voltage is :

2. If you want to measure Current, you have to interrupt the circuit like bellow :
3. If you want to measure resistance, it is as inidicated :

In this case you must shut the power supplier down and set the multimeter measurement
in ohms.

Considering the information presented, solve the exercises proposed:

30 15 A
30ohm 10 A
5A 5A 5A 5A 5A
30v 60v 25.7 mv 59.9 v 42.8 mv

10 15 A

33.3mv 20.0v 13.3mv

You might also like