Central Components Manufacturing

www.centralcm.com
About Us
Central Components Manufacturing was established in 1990 as a quality component manufacturer serving the electronic manufacturing and telecommunications industry. We are a technologically and vertically integrated manufacturing company with a broad range of capabilities and expertise. With more than a decade of experience in connectors and interconnection systems, we have the knowledge and expertise to service all of your connector needs. Through a continuous commitment to research and development, we're able to stay at the leading edge of interconnection technology. We continuously update and look for ways to further automate our production processes with state-ofthe-art injection molding, milling and hard press manufacturing equipment. This means we can offer consistent high-quality connectors and interconnection systems at internationally competitive prices. Service and quality are our highest priorities. Our quality control processes are monitored continuously to enable us to maintain high quality with streamlined production lines that adhere to MIL-C standards. Central Components Manufacturing constantly has new products on the drawing board. We keep in close contact with you, our customers, as well as the fast-paced connector market. This ensures the highest degree of customer satisfaction in the industry.

What We Manufacture

connectors interconnection devices electronic components modular telephone plugs ganged modular telephone jacks category 5 keystone jacks RF connectors fiber optic media connectors circular mini DIN jacks circular DIN plugs RCA jacks RCA plugs PLCC sockets small outline J-leaded sockets flat cable sockets IDC male cable plugs flat cable latch headers male shrouded latch headers miniature ribbon connectors

hand-held and portable antennas D-subminiature straight PCB tail connectors D-subminiature solder cup connectors D-subminiature machined contact right angle connectors D-subminiature IDC connectors D-subminiature high density crimp and poke connectors D-subminiature high density right angle connectors hardware custom cable assemblies and adapters crimp contact wire housings crimp wire housings male unshrouded pin headers unshrouded dual insulator pin headers

Central Components Manufacturing, 440 Lincoln Blvd., Middlesex, NJ 08846 Ph:732-469-5720 Fx: 732-469-1919

Central Components Manufacturing

www.centralcm.com
What We Manufacture (cont)

interconnection systems electrical connectors modular telephone jacks modular assembly tools modular inline couplers BNC connectors earphone jacks circular DIN jacks circular mini DIN plugs direct current power jacks IC sockets production sockets card edge connectors high density VESA card edge connectors flat cable card edge connectors

flat cable DIP plugs flat cable transition plugs miniature ribbon Centronics connectors serial ATA (SATA) connectors high definition multimedia interfaces (HDMI) D-subminiature crimp and poke connectors D-subminiature right angle connectors D-subminiature high density straight PCB tail connectors D-subminiature high density solder cup connectors D-subminiature dual port stacked right angle connectors backshells friction lock housings friction lock headers power headers box headers receptacle strips shunts

We can also manufacture custom products to match your requirements. Please tell us what you need and we'll let you know if it's available immediately or one of our manufacturing facilities can design, engineer and produce it for you at a competitive price. You may use our Contact Us page or send an email directly to [email protected].

Central Components Manufacturing, 440 Lincoln Blvd., Middlesex, NJ 08846 Ph:732-469-5720 Fx: 732-469-1919

Central Components Manufacturing

www.centralcm.com
Quality Policy
Central Components Manufacturing is ISO 9001:1008 certified and compliant. All of our products are RoHS compliant and lead free. All quality control procedures are fully documented and available for inspection. All CCM products undergo rigid inspection and testing both for material workmanship and performance. CCM subjects all pre-production products for testing to exceed industry standards, thus ensuring superior post production performance. Every CCM component is designed, manufactured and tested to ensure compliance with all applicable international safety testing agencies mentioned. Our safety agency reports are on file and available upon request. Our commitment to quality is a corporate wide responsibility from engineering and production through customer service, delivery and use. CCM employees strive for total customer satisfaction through a comprehensive commitment to service. This commitment ensures the highest possible quality, reliability and customer satisfaction in the industry. Central Components Manufacturing focuses on quality by adhering to the following standards and procedures: Inspection Equipment Inspection System Requirements Calibration System Requirements Quality Assurance Definitions and Terms Sampling Procedures and Controls Quality Programs Requirement MIL-I-4507B MIL-I-45208 MIL-STD-45662 MIL-STD-109 MIL-STD-105 MIL-Q-9858

Central Components Manufacturing is committed to total satisfaction from initial contact through delivery and use of all our products and services. All CCM standards and procedures are geared to meet requirements of ISO 9000/9002. Following the 2002/95/EC directive on the restriction of hazardous substances in electrical and electronic equipment, we have completed a program to restrict or eliminate the use of lead, mercury, hexavalent chromium (Cr6+), cadmium, PBB and polybrominated diphenyl ether (PBDE). We also support directive 2002/96/EC aimed at the proper handling of waste and discarded electronic equipment (WEEE). Central Components Manufacturing products are warranted for 60 days. The warranty is limited to the replacement of products displaying defective

Central Components Manufacturing, 440 Lincoln Blvd., Middlesex, NJ 08846 Ph:732-469-5720 Fx: 732-469-1919

Central Components Manufacturing

www.centralcm.com
CCM Manufacturing Profile
Factory information

Tai Linear/Central Ent. Co., Ltd., Taiwan, Taiwan R.O.C. President: Yuan Ping Xyu Vice President: Lihwa Chiang Engineering Director: Joseph Lin Wong Engineering/Marketing Manager: Lizzy Chiang USA General Manager: Gregory Lane (Central Label)

View Video Of Our Factory Here

About Tai Linear/Central

Established 1980 in Tainan Taiwan Xiamen China factory opened 1998 Manufacturing Facilities 500m x 2/2 Central Components Manufacturing sales office opened 1995 (USA) Registered manufacturer/exporter of electronic components ISO 9000 pending Employees: 118 in Taiwan; 486 in China plant Major Approvals: UL, CSA, FCC Compliant (UL file numbers E171970, E172105, E196498)

Main Products

PCB connectors, backplanes, cable assemblies, etc. RF connectors, Audio/Video cable assemblies, customer designed wire harnesses, etc. Fiber optic connectors, assemblies and adaptors Custom metal enclosures/components Sheet metal fabrications Solderless breadboards and accessories

Services Line

HI Rel IC Sockets and PGA/PLCC Sockets Telephone connectors, wires, tool kits, etc. OEM projects, die-casting, metal stamping, precision press tooling, etc.

Major OEM Approvals (USA)

Lucent Technologies Nortel

Central Components Manufacturing, 440 Lincoln Blvd., Middlesex, NJ 08846 Ph:732-469-5720 Fx: 732-469-1919

Central Components Manufacturing

www.centralcm.com
(profile cont.) Rockwell Automation Northrop Grumman Teleflex Dictaphone
Major OEM Sub-contractor for Amphenol FCI Berg Molex

Material and Process Specifications

All Central Components Manufacturing products adhere to the following military and commercial specifications and testing procedures. Insulator (Plastic Material Specifications) Molding Plastics, Thermoplastic Polyesters Flammability Temperature Index Plastic Materials Testing Dielectric Withstanding Voltage AC Loss Characteristics Impact Resistance of Plastics Resistance High Voltage, Low Current Are Resistance Water Absorption Test for Tensile Properties of Plastics Deflection Temperature of Plastics Compressive Properties of Plastics Coefficient of Linear Thermal Expansion Shear Strength of Plastics Rockwell Hardness of Plastics Flexual Properties of Plastics Specific Gravity and Density of Plastics Contact Material Specifications Brass Phosphor Bronze Plating (Outer Plating) Gold Tin

MIL-M-24519UL UL 94V-0UL UL 7U6B

ASTM D 1U9 ASTM D 150 ASTM D 256DC ASTM D 257 ASTM D 495 ASTM D 570 ASTM D 638 ASTM D 648 ASTM D 695 ASTM D 696 ASTM D 732 ASTM D 785 ASTM D 790 ASTM D 792

ASTM B16-85/MIL-C-39029B ASTM B 139 MIL-S-83505

MIL-G-45204 Type 1 Grade C MIL-T-10727 Type 1

Central Components Manufacturing, 440 Lincoln Blvd., Middlesex, NJ 08846 Ph:732-469-5720 Fx: 732-469-1919

Central Components Manufacturing

www.centralcm.com
Plating (Under Plating) Copper Nickel Plating Test Methods Coating Thickness (X-Ray) Coating Thickness (Betabackscatter Principle) Measuring Metal and Oxide Coating Thickness Assembly Testing Specifications Electrical Connectors Electronic Components Connections (Electrical, Solderless, Wrapped) Sockets (Lead, Electronic Components) Sockets (Plug-in Electronic Components) Environmental MIL-C-14550 QQ-N-290

ASTM-A-754-79 ASTM-B567 ASTM-B487-79

MIL-STD-1344 MIL-STD-202 MIL-STD-1130B MIL-S-83505 MIL-S-83734 MIL-STD-810

Our Distributors
Adtech Electronics - Pennsylvania (717-238-5484), Maryland, Virginia & Delaware (800-221-1014) Armbar Industries - New Jersey and California (800-679-8848) Becker Electronics - New York (631-619-9100) Beyond Components - MA, NH, VT, ME (978-392-9191), Georgia (678-494-2020), Iowa (319-373-2923), MI, OH (248-9260303), Upstate NY (585-328-1880), CT, NY Metro (203-269-9955), PA, NJ, MD, VA, DE, WV (610-524-9660), IL, WI, IN (847-301-8900), FL, AR, LA (407-877-2646), Texas (512-267-1811) Brothers Electronics - New Jersey (800-552-2255), Florida (800-342-6700), Delaware Valley (866-746-2200) New England (866-846-2200) Chiptronics - North Dakota (701-244-6894) DTI Electronics - Florida (407-297-7730) ECI Electronics - Pennsylvania (717-846-5334) Electronic Hardware, Ltd. - California (818-982-6100) Excel Components - New York (888-343-9235) Interconnect Electronics - Maryland (800-972-2173) J-Tron - New Jersey (888-595-8766) LXI Components - Florida (800-595-5134), Texas (817-835-0393), Alabama (256-772-5828), New York (845-462-2745) Metuchen Capacitors - New Jersey and California (800-679-6411) Midan Electronics - Connecticut (203-949-2077) M-Tronics - Alabama (256-461 8883) NEDCO Electronics - Missouri (314-344-0344), California (714-821-1516 ), Texas (972-323-7900), Minnesota (651-4056655), Wisconsin (262-798-9810), Illinois (847-465-0480) PSC Electronics - Ohio (440-946-0430), California (408-330-5919, 858-503-7766), Washington (360-735-1010) PUI - California (408-942-1717 x11), Massachusetts (978-988-1655) Stock Electronics - Florida (954-978-9875) Tonar Industries - New Jersey (800-56-TONAR), Canada (888-338-6627) Bisco Idustries - California (714) 876-2400, (800) 323-1232

Central Components Manufacturing, 440 Lincoln Blvd., Middlesex, NJ 08846 Ph:732-469-5720 Fx: 732-469-1919