Scribd Logo
Upload

Welcome to Scribd!

  • 19 views

    LPT - Specifications (En)

    Uploaded by

    jorserrano18
    1. The document provides specifications for warning light models LPT-1M1-□ and LPT-2M1-□, including operating voltages and currents, luminous intensities, IP protection ratings, flash patterns, and wiring diagrams. 2. The models come in red, amber, green, or blue colors and can operate between -30°C and +75°C. They have triple flash, extreme warning flash, continuous, or blinking flash patterns. 3. Wiring diagrams show how to connect multiple units for synchronous flashing, with a maximum of 20 units across 4 systems. Settings like flash pattern and group can be changed via lead wires.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    LPT - Specifications (En)

    Uploaded by

    jorserrano18
    19 views5 pages
    1. The document provides specifications for warning light models LPT-1M1-□ and LPT-2M1-□, including operating voltages and currents, luminous intensities, IP protection ratings, flash patterns, and wiring diagrams. 2. The models come in red, amber, green, or blue colors and can operate between -30°C and +75°C. They have triple flash, extreme warning flash, continuous, or blinking flash patterns. 3. Wiring diagrams show how to connect multiple units for synchronous flashing, with a maximum of 20 units across 4 systems. Settings like flash pattern and group can be changed via lead wires.

    Original Title

    LPT_Specifications (En)_

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    1. The document provides specifications for warning light models LPT-1M1-□ and LPT-2M1-□, including operating voltages and currents, luminous intensities, IP protection ratings, flash patterns, and wiring diagrams. 2. The models come in red, amber, green, or blue colors and can operate between -30°C and +75°C. They have triple flash, extreme warning flash, continuous, or blinking flash patterns. 3. Wiring diagrams show how to connect multiple units for synchronous flashing, with a maximum of 20 units across 4 systems. Settings like flash pattern and group can be changed via lead wires.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    19 views5 pages

    LPT - Specifications (En)

    Uploaded by

    jorserrano18
    1. The document provides specifications for warning light models LPT-1M1-□ and LPT-2M1-□, including operating voltages and currents, luminous intensities, IP protection ratings, flash patterns, and wiring diagrams. 2. The models come in red, amber, green, or blue colors and can operate between -30°C and +75°C. They have triple flash, extreme warning flash, continuous, or blinking flash patterns. 3. Wiring diagrams show how to connect multiple units for synchronous flashing, with a maximum of 20 units across 4 systems. Settings like flash pattern and group can be changed via lead wires.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 5

    Drawing No. Rev.

    Page

    LPT-1M1-W18 C 1 / 5

    SPECIFICATIONS

    [1. General Specifications]


    Product Name Warning Light
    Model LPT-1M1-□ (□：R, Y, G, B) LPT-2M1-□ (□：R, Y, G, B)
    Rated Voltage 12 - 24V DC
    Operating Voltage Range 9.5 - 30V DC
    Luminous Color Red (R) Amber (Y) Green (G) Blue (B) Red (R) Amber (Y) Green (G) Blue (B)
    Rated Current
    12V DC 0.30A 0.60A 0.50A 1.10A 1.30A 1.20A
    Consumption Max.
    24V DC 0.15A 0.30A 0.25A 0.55A 0.65A 0.60A
    Rated Power Max. 3.6W 7.2W 6.0W 13.2W 15.6W 14.4W
    Operating Ambient Temperature -30 ℃ ～ +75 ℃
    Storage Ambient Temperature -30 ℃ ～ +75 ℃
    Mounting Location Indoor / Outdoor *1
    Mounting Direction All Directions
    Protection Rating IP68(IEC 60529) (IPX8: 1 m underwater for 1 hour)/ NEMA TYPE 4X,13
    Environmental Condition All Directions (excluding end of the cable)
    Vibration Resistance 90m/s²
    Luminous Luminous Color Red (R) Amber (Y) Green (G) Blue (B) Red (R) Amber (Y) Green (G) Blue (B)
    Intensity *2 500cd 550cd 850cd 300cd 1,650cd 1,800cd 2,800cd 1,000cd
    or more or more or more or more or more or more or more or more
    Triple flash, Extreme Warning flash, Continuous, or Blinking
    Flash pattern (4 types) *3
    (for details, refer to “4.1. Flash pattern”. Factory default status: Triple flash)
    Flashing Rate (Typ.) Triple / Extreme warning : 400 flashes per minute Blinking : 67 flashes per minute
    Dimmer Function Yes
    Number of units Maximum 20 units (The LPT-1M1-□ and LPT-2M1-□ can be used together.)
    Synchronize Wire
    between each unit 3m *4
    Daisy-
    (Maximum)
    Chained
    Group A / Group B
    Flash group
    (for details, refer to “4.2. Flash group”. Factory default status: Group A)
    Multiple-unit operation Synchronized / Alternating
    Items Flash pattern , Flash group
    Each flash setting can be switched by applying voltage to the lead wire.
    (for details, refer to “Instruction manual”.)
    Setting
    Method When changing from factory settings, specify the flash settings before wiring the
    equipment. Also, while in operation, do not change flash patterns or flash group
    settings.
    Mass 72 g or less 130 g or less
    Outer Dimensions Refer to the Outer Dimension Drawing
    *1 Install on a flat, sturdy surface. Be sure that the product is securely mounted
    when used where vibration is present.
    *2 Due to the characteristics of the LED elements, there may be a slight variation in
    color tone and brightness between units.
    Remarks
    *3 Flash Pattern (Triple flash / Blinking) meets SAE J595 Class 3.
    *4 If the product interval is 3m or more, up to 4 synchronize wire can be extended to
    20m each.
    Drawing No. Rev. Page

    LPT-1M1-W18 C 2 / 5

    EMC Directive (EN61000-6-4,EN61000-6-2) *5


    KC（KN61000-6-4,KN61000-6-2）
    Conformity Standards
    FCC Part15 SubpartB Class A
    RoHS Directive (EN IEC 63000)
    *5 EMC meets level ECE R10.05.
    ・If the equipment used with this product requires power insulation, use an insulated
    power supply.
    Remarks
    ・If you use this product in an environment where a momentary power failure occurs,
    the flash may go out in time with the momentary power failure.Use this product in an
    environment where momentary power failure does not occur.
    [2. Model Number Configuration]

    LPT- M1-
    Luminous Color
    R : Red
    Size Y : Amber
    1 : 86.0×28.0mm G : Green
    2 : 114.4×43.4mm B : Blue

    [3. Wiring Diagram]


    3.1. When using 1unit

    3.2. When using multiple units (2 or more,5 or less) in a synchronous operation

    3m *4

    3.3. When using multiple units (6 or more,20 or less) in a synchronous operation


    ・Distribute the power system into multiple system.
    ・You can connect up to 5 units per system. For 20 units, 4 systems are required.

    *1*2 : Wiring protection (Normal Blow).Please use if necessary.


    LPT-1M1-□： 1.0A Consider the total current
    Remarks *1 *2
    LPT-2M1-□： 2.0A consumption of the equipment in use.
    Drawing No. Rev. Page

    LPT-1M1-W18 C 3 / 5
    [4. Flash Specifications]

    4.1. Flash pattern


    1cycle
    Light on
    Triple flash
    [SAE]
    Dim.
    *1 *2
    Light off

    1cycle
    Light on
    Extreme
    Warning
    flash Dim.

    Light off

    Light on

    Continuous
    Dim.

    Light off

    1cycle
    Light on
    Blinking
    [SAE]
    *2 Dim.

    Light off

    4.2. Flash group *3

    Flash Flash
    Group A
    *1
    1 cycle

    Flash Flash
    Group B

    half cycle 1 cycle

    *1: Factory default status


    Remarks *2: Meets level SAE J595 Class3.
    *3:Exluding Continuous.
    LPT-1M1-W18
    4 / 5

    株式会社 パトライト
    PATLITE Corporation
    LPT-1M1-W18
    5 / 5

    株式会社 パトライト
    PATLITE Corporation

    You might also like