Forti AP Series Datasheet

Data Sheet
FortiAP™ Series
FortiLAN Cloud- or FortiGate-Managed Access Points

FortiAP™ access points are managed centrally by the integrated WLAN
controller of any FortiGate® security appliance or through the FortiLAN Cloud
provisioning and management portal. With the integration of the wireless
controller functionality into the market-leading FortiGate appliance, these APs
are perfect for campus and branch deployments. Fortinet’s Security Fabric
enables you to easily manage wired and wireless security from a Single-
pane-of-glass management console and protects your network from the
Highlights latest security threats.
• Unified management console

ANTENNA INDOOR OUTDOOR
simplifies operations, HARDWARE OFFERINGS TYPE USE USE
ensuring consistency in
802.11ax Wi-Fi 6E
effective policy enforcement
FAP-431G 4x4 Indoor tri-radio 11ax 6Ghz Capable APs Internal ✓⃝
and compliance
FAP-433G 4x4 Indoor tri-radio 11ax 6Ghz Capable APs External ✓⃝
• Built-in foundation for zero- FAP-231G 2x2 Indoor tri-radio 11ax 6Ghz Capable APs Internal ✓⃝
trust network access (ZTNA) FAP-233G 2x2 Indoor tri-radio 11ax 6Ghz Capable APs External ✓⃝
and secure access service
802.11ax Wi-Fi 6
edge (SASE), allowing you
FAP-831F 8x8 Indoor tri-radio 11ax AP Internal ✓⃝
the flexibility to easily deploy
FAP-433F 4x4 Indoor tri-radio 11ax APs External ✓⃝
microbranches with the
FAP-432F 4x4 Ruggedized indoor/outdoor tri-radio 11ax AP External ✓⃝ ✓⃝
security you need at the
FAP-432FR 4x4 C1D2 Certified tri-radio 11ax AP External ✓⃝ ✓⃝
edge of your network
FAP-431F 4x4 Indoor tri-radio 11ax APs Internal ✓⃝
• Wireless LAN security done
FAP-231F 2x2 Indoor tri-radio 11ax AP Internal ✓⃝
right, from the leader in
FAP-234F 2x2 Ruggedized indoor/outdoor tri-radio 11ax AP Internal ✓⃝ ✓⃝
network security. Integrated
FAP-23JF 2x2 Wall-mount tri-radio AP Internal ✓⃝
Firewall, IPS, Application
802.11ac (Wave 2) Wi-Fi 5
Control, and Web Filter
protect the wireless LAN FAP-223E 2x2 Indoor dual-radio APs External ✓⃝
from the latest security FAP-221E 2x2 Indoor dual-radio APs Internal ✓⃝
threats
• Protects the network from
advanced wireless threats
and satisfies industry
compliance such as PCI DSS
FortiAP Series - FortiGate or Cloud-managed Access Points Data Sheet
Use Cases
FortiAPs allow for a versatile collection of installation topologies with options to fit any
enterprise.
Campus
A single building with multiple floors, or a corporate or education campus with a group of large
buildings.
• High-capacity designs including Dual 5GHz and tri-band with Wi-Fi 6E allow a maximal
number of client devices to attach to the network at the same time without over-air
congestion
• Complete NOC functionality with network visibility and AIOps simplify a complex network
deployment into a solution manageable by IT teams of any size
Branch Office / SD-Branch

A highly distributed number of small sites, often with no on-site IT.
• Built in NAC functions* allow secure onboarding of devices at remote locations where IT
doesn’t have reliable visibility
• Management orchestration with zero-touch deployment allows for quick and easy rollouts
without the need for skilled installers at each site
Micro Branch
Ultra small sites that still fall under IT’s responsibility.
• Can act as a SASE endpoint as a foundation for zero-trust network access (ZTNA)
• Simple management and provisioning through FortiSASE interface
Remote Workers
A remote AP installed at a worker’s home or at micro-branch office space.
• Split tunneling allows local traffic to remain local while sending other traffic to the data center
for inspection when needed
• Desktop mounting options for wall-plate models allow the use of Ethernet as well as Wi-Fi
connectivity while leveraging the same secure tunnel
SMB
Single site or small collection of sites with limited IT resources.
• Built-in NAC functions* bring security to the wireless network with no need to install and
manage additional products
• Network and security convergence decreases management overhead while keeping the
network secure
*FortiGate-managed installations only.

2
Highlights
FortiAP 431G and 433G

These high performing enterprise class extended frequency band Wi-Fi 6E indoor APs provide
three radios and four spatial streams. These access points support the 6 GHz band, OFDMA,
and a 5 Gigabit Ethernet port. The APs can provide 24/7 scanning across all bands while still
providing access on both the 2.4 GHz and 5 GHz bands or 2.4 Ghz and dual 5 GHz service or
the AP can be configured to provide simultaneous access on 2.4 GHz, 5 GHz, and the 6 GHz
bands. The integrated BLE/ ZigBee radio can be used for beacons and locationing applications.
Wi-Fi 6E | Tri-Radio 2.4 + 5GHz + 5GHz / 6GHz / Scanning | 8 Internal Antennas /

4 External RPSMA Connectors + 4 External Permanently attached Antennas
4x4 MU-MIMO | Up to 1148 Mbps + 2402 Mbps + 4804 Mbps
FAP-431G FAP-433G
3
Specifications
FortiAP 431G FortiAP 433G FortiAP 431G FortiAP 433G
Hardware Advanced 802.11 Features
Hardware Type Indoor AP Indoor AP OFDMA Yes Yes
Number of Radios 3 + 1 BLE 3 + 1 BLE Spatial Reuse (BSS Yes Yes
Coloring)
Number of Antennas Internal: x4 Dual band Wi-Fi + External: x4 Dual band
x4 Tri-band Wi-Fi & Scanning Wi-Fi + x4 Tri-band UL MU-MIMO Yes Yes
+ 1 Single band 2.4GHz BLE/ Wi-Fi & Scanning DL- MU-MIMO Yes Yes
ZigBee Internal: 1 Single band
2.4GHz BLE/ZigBee Enhanced Target Wake Yes Yes
Time (TWT)
Antenna Type and Peak Omni Directional antenna. Omni Directional antenna.
Gain ZeroWait DFS No No
Dual band: 4.0 dBi for Dual band: 5.0 dBi for
2.4GHz, 5.6 dBi for 5 GHz 2.4GHz, 5.0 dBi for 5 GHz Wireless Monitoring Capabilities
Tr-band: 4.0 dBi for Tr-band: 5.0 dBi for
Rogue Scan Radio Modes Background, Dedicated
2.4GHz, 6.0 dBi for 5 GHz 2.4GHz, 5.0 dBi for 5 GHz &
& 5.7dBi for 6GHz band 4.0dBi for 6GHz band WIPS / WIDS Radio Background, Dedicated (recommended)
BLE antenna: 5.1dBi for BLE Omni Directional antenna Modes
2.4Ghz Single band: 4.0dBi for Packet Sniffer Mode Yes Yes
2.4GHz
Spectrum Analyzer Yes Yes
Frequency Bands (GHz)* 2.400–2.4835, 5.150–5.250, 5.250–5.350, 5.350-5.470m
5.470–5.725, 5.725–5.850, 5.925–6.425, 6.425–6.525, 6.525–7, Dimensions
5.925–6.875, 6.875–7.125
Length x Width x Height 8.85x 8.85 x 2.12 inches (225.0x 225.0 x 54.0 mm)
Radio 1 Capabilities Frequency band: 2.4GHz
Weight 3.05 lbs (1.4 kg)
Channel width: 20/40MHz
Modulation: BPSK, QPSK, 64/256/1024 QAM Package (shipping) 5.25 lbs (2.4 kg)
MIMO Chains: 4x4 Service Weight
Radio 2 Capabilities Frequency band: 5.0GHz Accessories

Channel width: 20/40/80/80+80MHz
Mounting Options Ceiling, T-Rail, and Wall
Modulation: BPSK, QPSK, 64/256/1024 QAM
MIMO Chains: 4x4 Service Included Accessories Standard Mounting kit for Ceiling, T-Rail and Wall
Radio 3 Capabilities Frequency band: 2.4GHz, 5.0GHz, and 6.0GHz Power Supply SP-FAP250-PA-10 or SP-FAP400-PA-XX or
Channel width: 20/40/80/160MHz 802.3bt PoE(GPI-145)
MIMO Chains: 4X4 Service (2x2 when Scanning) Environment
Maximum Data Rate Radio 1: up to 1148 Mbps Power Consumption 31.7 Watts 31.7 Watts
(Max)
Radio 2: up to 2402 Mbps
Radio 3: Up to 4804 Mbps PoE Mode 802.3af : Low – All Radios Disabled ; USB – Disabled
802.3at : Low – Tx Power 17dBm ; Chain 4x4; USB – Disabled
Bluetooth Low Energy Bluetooth scanning and iBeacon advertizement
Radio 802.3bt / DC : Full – Tx Power Full ; Chain 4x4;USB – Enabled
@10 dBm max TX power
Humidity 5%–90% non-condensing
Interfaces x2 100/1000/2500/5000 Base-T RJ45,
1 Type 3.0 USB, 1 RS-232 RJ45 Serial Port Operating / Storage 32°–122°F (0°–50°C) / -22°–158°F (-30°–70°C)
Temperature
MDI/MDIX Supported Supported
Directives Low Voltage Directive • RoHS
Power over Ethernet 1 802.3bt PoE default or x2 802.3at PoE
(PoE) (Dual PoE current sharing) UL2043 Plenum Material Yes Yes
Simultaneous SSIDs Up to 8 per client serving radio (7 if background scanning is Mean Time Between >10 Years >10 Years
enabled) Failures
EAP Type(s) EAP-TLS, EAP-TTLS/MSCHAPv2, EAPv0/EAP-MSCHAPv2, IP Rating N/A N/A

PEAPv1/EAP-GTC, EAP-SIM, EAP-AKA, EAP-FAST Surge Protection Built In No No
User/Device WPA™, WPA2™, and WPA3™ with 802.1x or Preshared key, Hit-less PoE Failover Yes Yes
Authentication WEP, Web Captive Portal, MAC blocklist and allowlist
Certifications
Maximum Tx Power Radio 1: 2.4GHz: 27 dBm / 501 mW (4 chains combined)*
Radio 2: 5GHz: 26 dBm / 400 mW (4 chains combined)* Wi-Fi Alliance Certified Yes (includes Passpoint) Yes (includes Passpoint)
Radio 3: 5GHz: 26 dBm / 400 mW (4 chains combined)*
DFS CE, FCC, Singapore CE, FCC, Singapore
6GHz: 24 dBm 251 mW (4 chains combined @ 160MHz
BW)* Warranty
Kensington Lock Yes Yes Limited Lifetime Yes Yes

Warranty
IEEE Standards 802.11a, 802.11b, 802.11d, 802.11e, 802.11g, 802.11h, 802.11i,
802.11j, 802.11k, 802.11n, 802.11r, 802.11u, 802.11v, 802.11w, * Frequency selection and power may be restricted to abide by regional
802.11ac, 802.11ax, 802.1Q, 802.1X, 802.3ad, 802.3at, regulatory compliance laws.
802.3bt, 802.3az, 802.3bz
SSID Types Supported Local-Bridge, Mesh, and Tunnel
Per Radio Client Capacity Up to 512 clients per radio (Radio1, Radio2 and Radio3)
Cellular Co-existence Yes Yes
LED Off Mode Yes Yes
4
RF Rx/Tx Performance Table
FORTIAP 431G / 433G

Radio 1 Radio 2 Radio3
802.11ax 4x4 802.11ax 4x4 4x4 Tri band Service and
2x2 Scanning radio
Tx power/chain Rx Sensitivity Tx power/chain Rx Sensitivity Tx power/chain Rx Sensitivity
Data rate (dBm) (dBm) (dBm) (dBm) (dBm) (dBm)
2.4GHz, 802.11b
1 Mbps 21 -99 -99
11 Mbps 21 -91 -91
2.4GHz, 802.11g
6 Mbps 21 -93 -95
54 Mbps 21 -77 -78
2.4GHz, 802.11n HT20
MCS0 21 -95 -92
MCS7 19 -77 -74

2.4GHz, 802.11n HT40
MCS0 20 -92 -90
MCS7 18 -74 -72
2.4GHz, 802.11ax HE20
MCS0 21 -94 -90
MCS11 19 -64 -71
2.4GHz, 802.11ax HE40
MCS0 21 -91 -91
MCS11 19 -62 -72

5.0GHz, 802.11a
6 Mbps 23 -93 22 -93
54 Mbps 21 -76 21 -76
5.0GHz, 802.11n HT20
MCS0 22 -93 21 -93
MCS7 20 -75 18 -73
5.0GHz, 802.11n HT40
MCS0 21 -93 21 -90
MCS7 18 -78 18 -71
5.0GHz, 802.11ac VHT20
MCS0 22 -93 21 -93

MCS9 20 -72 18 -69
5.0GHz, 802.11ac VHT40
MCS0 22 -91 21 -90
MCS9 19 -70 18 -64
5.0GHz, 802.11ac VHT80
MCS0 20 -86 19 -88
MCS9 18 -65 16 -61
5.0GHz, 802.11ax HE20
MCS0 22 -93 22 -92
MCS11 19 -63 19 -65
5.0GHz, 802.11ax HE40
MCS0 21 -90 22 -88
MCS11 19 -70 19 -61
5.0GHz, 802.11ax HE80
MCS0 18 -86 20 -85
MCS11 16 -59 17 -58
5.0GHz, 802.11ax HE160
MCS0 19 -82
MCS11 16 -57
6.0GHz, 802.11ax HE160
MCS0 17 -82
MCS11 14 -56
Maximum capability of the Hardware provided (Excluding antenna gain)
5
Antenna Radiation Patterns

FAP-431G FAP-433G
Radio1 and Radio2 2.45GHz plots FAP-433G Radio 1&2 antenna plots
Radio3 2.45GHz plots FAP-433G Radio3 antenna plots
R3 2.45GHz Horizontal
180
170 10 190
160 200
150 210
140 0 220
130 -10 230
120 -20 240
110 -30 250
100 -40 260
90 -50 270
80 280
70 290
60 300
50 310
40 320
30 330
20 340
10 350
0
BLE/ZigBee 2.45GHz plots FAP-433G BLE/ZigBee antenna plots
BLE/ZigBee 2.45GHz Horizontal BLE/ZigBee 2.45GHz Vertical

180 180
170 5 190 170 5 190
160 200 160 200
150 210 150 210
140 -5 220 140 -5 220
130 230 130 230
-15 -15
120 240 120 240
-25 110 -25 250
110 250
100 -35 260 100 -35 260
90 -45 270 90 -45 270
80 280 80 280
70 290 70 290
60 300 60 300
50 310 50 310
40 320 40 320
30 330 30 330
20 340 20 340
10 350 10 350
0 0
6
Highlights
FortiAP 231G and 233G

These enterprise class extended frequency band Wi-Fi 6E indoor APs provide three radios
and two spatial streams. These access points support the 6 GHz band, OFDMA, a 2.5 Gigabit
Ethernet port, plus an additional 1 Gbps Ethernet port for PoE diversity. The APs can provide
24/7 scanning across all bands while still providing access on both the 2.4 GHz and 5 GHz
bands or 2.4 Ghz and dual 5 GHz service or the AP can be configured to provide simultaneous
access on 2.4 GHz, 5 GHz, and the 6 GHz bands. The integrated BLE/ ZigBee radio can be
used for beacons and locationing applications.
Wi-Fi 6E | Tri-Radio 2.4 GHz + 5 GHz + 5 GHz / 6 GHz / scanning | 4 Internal Antennas /
2 External RPSMA Connectors + 2 External Permanently attached Antennas
2x2 MU-MIMO | Up to 574 Mbps + 1201 Mbps + 2402 Mbps
FAP-231G FAP-233G
7
Specifications
FortiAP 231G FortiAP 233G FortiAP 231G FortiAP 233G
Hardware Type Indoor AP Indoor AP OFDMA Yes Yes
Number of Radios 3 + 1 BLE 3 + 1 BLE Spatial Reuse Yes Yes
(BSS Coloring)
Number of Antennas Internal External
x2 Dual band Wi-Fi + x2 Dual band Wi-Fi + x2 Tri- UL MU-MIMO Yes Yes
x2 Tri-band Wi-Fi & band Wi-Fi & Scanning + DL- MU-MIMO Yes Yes
Scanning + 1 Single band Internal 1 Single band
2.4GHz BLE/ZigBee 2.4GHz BLE/ZigBee Enhanced Target Wake Yes Yes
Time (TWT)
Antenna Type and Peak Omni Directional antenna. Omni Directional antenna.
Gain ZeroWait DFS No No
Dual band: 4.5 dBi for Dual band: 4.5 dBi for
2.4GHz, 5.5 dBi for 5 GHz 2.4GHz, 4.5 dBi for 5 GHz. Wireless Monitoring Capabilities
Tr-band: 4.5 dBi for Tr-band: 4.5 dBi for
Rogue Scan Radio Modes Background, Dedicated
2.4GHz, 5.5 dBi for 5 GHz 2.4GHz, 4.5 dBi for 5 GHz &
& 5.5dBi for 6GHz band 4.5dBi for 6GHz band BLE WIPS / WIDS Radio Modes Background, Dedicated (recommended)
BLE antenna: 4.0dBi for Omni Directional antenna.
Packet Sniffer Mode Yes Yes
2.4Ghz Single band: 4.0dBi for
2.4GHz Spectrum Analyzer Yes Yes
Frequency Bands (GHz)* 2.400–2.4835, 5.150–5.250, 5.250–5.350, 5.470–5.725, Dimensions

5.725–5.850, 5.925–6.425, 6.425–6.525, 6.525–7, 5.925–
6.875, 6.875–7.125 Length x Width x Height 7.18 x 7.18 x 2.12 inches (182.4 x 182.4 x 54.0 mm)
Radio 1 Capabilities Frequency band: 2.4GHz Weight 1.75 lbs (0.8 kg) 1.95 lbs (0.88 kg)
Channel width: 20/40MHz Package (shipping) Weight 3.05 lbs (1.4 kg) 3.35 lbs (1.51 kg)
MIMO Chains: 2x2 Service Accessories
Radio 2 Capabilities Frequency band: 5.0GHz Mounting Options Ceiling, T-Rail, and Wall
Channel width: 20/40/80MHz Included Accessories Standard Mounting kit for Ceiling, T-Rail and Wall
MIMO Chains: 2x2 Service Power Supply SP-FAP200-PA-XX or 802.3at PoE (GPI-130)
Radio 3 Capabilities Frequency band: 2.4GHz, 5.0GHz, and 6.0GHz Environment
Channel width: 20/40/80/160MHz
Power Consumption Based on the PoE standard.
Modulation: BPSK, QPSK, 64/256/1024 QAM (Maximum)
MIMO Chains: 2x2 Service and Scanning 802.3af = 15.4W max
802.3at = 25.5W max
Maximum Data Rate Radio 1: up to 574 Mbps
Radio 2: up to 1201 Mbps PoE Mode 802.3af : Low – Tx Power limited to 17 dBm ;Radio3 –
Radio 3: Up to 2401 Mbps Disabled ;USB – Disabled
Bluetooth Low Energy Bluetooth scanning and iBeacon advertizement @10 dBm 802.3at / DC: High/Full – Tx Power Full;USB – Enabled ;
Radio max TX power Humidity 5%-90% non-condensing
Interfaces 1 100/1000/2500 Base-T RJ45, 1 10/100/1000 Base-T RJ45, Operating / Storage 32°–122°F (0° - 50°C) / -22°–158°F (-30°–70°C)
1x Type 3.0 USB, 1 RS-232 RJ45 Serial Port Temperature
MDI/MDIX Supported Supported Directives Low Voltage Directive • RoHS
Power over Ethernet (PoE) 1 x 802.3at PoE default UL2043 Plenum Material Yes Yes
Simultaneous SSIDs Up to 8 per client serving radio (7 if background scanning Mean Time Between >10 Years >10 Years
is enabled) Failures
EAP Type(s) EAP-TLS, EAP-TTLS/MSCHAPv2, EAPv0/EAP-MSCHAPv2, IP Rating N/A N/A

PEAPv1/EAP-GTC, EAP-SIM, EAP-AKA, EAP-FAST
Surge Protection Built In No No
User/Device Authentication WPA™, WPA2™, and WPA3™ with 802.1x or Preshared key,
Hit-less PoE Failover N/A N/A
WEP, Web Captive Portal, MAC blocklist and allowlist
Maximum Tx Power Radio 1: 2.4GHz: 23 dBm / 200 mW (2 chains combined)* Certifications
Radio 2: 5GHz: 23 dBm / 200 mW (2 chains combined)* Wi-Fi Alliance Certified Yes (includes Passpoint) Yes (includes Passpoint)
Radio 3: 5GHz: 23 dBm / 200 mW (2 chains combined)*
6GHz: 21 dBm 126 mW (2 chains combined @ 160MHz DFS CE, FCC, JP, Indonesia, CE, FCC, JP, Indonesia,
BW)* Korea, Taiwan Korea, Taiwan
Kensington Lock Yes Yes Warranty
IEEE Standards 802.11a, 802.11b, 802.11d, 802.11e, 802.11g, 802.11h, 802.11i, Limited Lifetime Warranty Yes Yes
802.11j, 802.11k, 802.11n, 802.11r, 802.11u, 802.11v, 802.11w,
* Frequency selection and power may be restricted to abide by regional regulatory
802.11ac, 802.11ax, 802.1Q, 802.1X, 802.3ad, 802.3af,
compliance laws.
802.3at, 802.3az, 802.3bz
SSID Types Supported Local-Bridge, Mesh, and Tunnel
Per Radio Client Capacity Up to 512 clients per radio (Radio1, Radio2 and Radio3)
Cellular Co-existence Yes Yes
8

FORTIAP 231G / 233G
Radio 1 Radio 2 Radio3
802.11ax 4x4 802.11ax 4x4 Tri band Service and Scanning radio
Tx power/chain Rx Sensitivity Tx power/chain Rx Sensitivity Tx power/chain Rx Sensitivity
Data rate (dBm) (dBm) (dBm) (dBm) (dBm) (dBm)
2.4GHz, 802.11b
1 Mbps 23 -99 -92
11 Mbps 23 -91 -91
2.4GHz, 802.11g
6 Mbps 23 -94 -92
54 Mbps 23 -78 -77
2.4GHz, 802.11n HT20
MCS0 23 -94 -92
MCS7 21 -75 -74

2.4GHz, 802.11n HT40
MCS0 22 -92 -90
MCS7 20 -73 -72
2.4GHz, 802.11ax HE20
MCS0 23 -90 -90
MCS11 21 -71 -71
2.4GHz, 802.11ax HE40
MCS0 22 -91 -91
MCS11 20 -72 -72
5.0GHz, 802.11a
6 Mbps 23 -92 19 -93
54 Mbps 23 -76 19 -76
5.0GHz, 802.11n HT20
MCS0 23 -93 19 -93
MCS7 21 -74 18 -73
5.0GHz, 802.11n HT40
MCS0 22 -91 21 -90
MCS7 21 -72 18 -71
5.0GHz, 802.11ac VHT20
MCS0 23 -91 21 -93
MCS9 21 -72 18 -69
5.0GHz, 802.11ac VHT40
MCS0 22 -91 21 -90
MCS9 19 -72 18 -64
5.0GHz, 802.11ac VHT80
MCS0 21 -86 20 -88
MCS9 18 -62 17 -61
5.0GHz, 802.11ax HE20
MCS0 23 -91 19 -91
MCS11 20 -72 17 -72
5.0GHz, 802.11ax HE40
MCS0 22 -91 21 -91
MCS11 19 -72 18 -72
5.0GHz, 802.11ax HE80
MCS0 21 -87 21 -87
MCS11 18 -58 17 -58
6.0GHz, 802.11ax HE160
MCS0 18 -87
MCS11 16 -57
Maximum capability of the Hardware provided (Excluding antenna gain)
9

FAP-231G FAP-233G
BLE/ZigBee 2.45GHz plots FAP-233G BLE/ZigBee antenna plots
10
Highlights
FortiAP 831F
This high throughput enterprise class 802.11ax indoor AP provides three radios and 8 spatial
streams. This top-of-the line access point supports OFDMA, a 5.0 Gigabit Ethernet port, plus
an additional 1 Gbps Ethernet port for PoE diversity. The AP can provide 24/7 scanning across
both bands while still providing access on both the 2.4 GHz and 5 GHz bands. The integrated
BLE radio can be used for beacons and locationing applications.
802.11ax | Tri-Radio 2.4 GHz + 5 GHz + scanning | 13 Internal Antennas
8x8 MU-MIMO | Up to 1147 Mbps + 4804 Mbps
FAP-831F
11
Specifications
FortiAP 831F FortiAP-831F
Hardware Type Indoor AP OFDMA Yes (UL and DL)
Number of Radios 3 + 1 BLE Spatial Reuse (BSS Coloring) Yes
Number of Antennas 4 2.4GHz band WiFi + 8 5GHz band WiFi + I Dual band UL-MU-MIMO 802.11ax mode Yes
Scanning + 1 2.4GHz band BLE
DL-MU-MIMO Yes
Antenna Type and Peak Gain PIFA:
Enhanced Target Wake Time Yes
4.0 dBi for 2.4 GHz band WiFi antennas (TWT)
6.0 dBi for 5.0 GHz band WiFi antennas
4.0 dBi for dual band Scanning radio antenna ZeroWait DFS /Agile DFS No
4.5 dBi for 2.4 GHz band BLE antenna
Wireless Monitoring Capabilities
Frequency Bands (GHz)* 2.400–2.4835, 5.150–5.250, 5.250–5.350, 5.470–5.725,
Rogue Scan Radio Mode Dedicated
5.725–5.850
WIPS / WIDS RAdio Modes Dedicated
Radio 1 Capabilities Frequency Band: 2.4 GHz
Channel width: 20/40 MHz Packet Sniffer Mode Yes
Modulation: BPSK, QPSK, QAM64
Spectrum Analyzer Yes
MIMO chains: 4x4 service
Radio 2 Capabilities Frequency Band: 5.0 GHz Dimensions
Channel width: 20/40/80/80+80/160MHz Length x Width x Height 9.05 x 89.05 x 2.15 inches (230 x 230 x 55 mm)
Modulation: BPSK, QPSK, QAM64, QAM256, and
QAM1024 Weight 2.25 lbs (1.02 kg)
Mimo chains: 8x8 service in mode 1 or 4x4+4x4 service Package (shipping) Weight 4.2 lbs (1.9 kg)
in mode 2
Accessories
Radio 3 Capabilities Frequency band: 2.4/5.0 GHz
MIMO chains: 1x1 frequency scanning Mounting Options Ceiling, T-Rail, and Wall
Maximum Data Rate Radio 1: up to 1147.5 Mbps Included Accessories Mount kit for Ceiling, T-Rail, and Wall
Radio 2: up to 4.804 Gbps in 8x8 MIMO and in 4x4 +
Power Supply SP-FAP400-PA-XX or GPI-130
4x4 MIMO modes
Environment
Bluetooth Low Energy Radio Bluetooth scanning and iBeacon advertisement @ 10
dBm max TX power PSE Functionality No
Interfaces 1x 100/1000/2500/5000 Base-T RJ45 Power Consumption (Max) 33 W
1 x 10/100/1000 Base-T RJ45
PoE Mode
1x Type 3.0 USB, 1x RS-232 RJ45 Serial Port
Single 5G DC/2at --> Full Mode ; Radios will be in (8x8|4x4) &
USB Enabled
Power over Ethernet (PoE) 2x 802.3at/bt/30W Passive PoE in (Full function) 1at/2af --> High Mode ; Radios will be in (8x8|4x4) &
1x 802.3at PoE in (USB3.1 disabled) USB Disabled
1af --> Low Mode ; Radios will be [2x2|2x2], Tx Power
Simultaneous SSIDs Up to 8 per client serving radio (7 if background 10 dBm & USB Disabled
scanning is enabled)
Dual 5G DC/2at --> Full Mode ; Radios will be in [4x4|4x4|4x4]
EAP Type(s) EAP-TLS, EAP-TTLS/MSCHAPv2, EAPv0/EAP- & USB Enabled
MSCHAPv2, PEAPv1/EAP-GTC, EAP-SIM, EAP-AKA, 1at/2af --> High Mode ; Radios will be in
EAP-FAST [4x4|4x4|4x4] & USB Disabled
User/Device Authentication WPA™, WPA2™, and WPA3™ with 802.1x or Preshared key, 1af --> Low Mode ; Radios will be [2x2|2x2|2x2], Tx
WEP, Web Captive Portal, MAC blocklist and allowlist Power 10 dBm & USB Disabled
Maximum Tx Power Radio 1: 2.4 GHz 27 dBm / 500 mW (4 chains Humidity 5–90% Non-Condensing
(Conducted) combined)* Operating / Storage Temp. 32°–122°F (0°–50°C) / -22°–158°F (-30°–70°C)
Radio 2: 5 GHz 25.5 dBm / 354 mW (4 chains
combined)* Directives Low Voltage Directive • RoHS
Radio 3: NA UL2043 Plenum Material No
Kensington Lock Yes Mean Time Betw. Failures >10 Years
IEEE Standards 802.11a, 802.11b, 802.11d, 802.11e, 802.11g, 802.11h, Surge Protection Built In No
802.11i,802.11j, 802.11k, 802.11n, 802.11r, 802.11u,
Certifications
802.11v, 802.11ac, 802.11ax (Wi-Fi 6), 802.1Q, 802.1X,
802.3ad, 802.3af, 802.3at, 802.3az, 802.3bz Wi-Fi Alliance Certified Yes (includes Passpoint)
SSID Types Supported Local-Bridge, Mesh, Tunnel DFS FCC, IC, CE, Brazil and Taiwan
Per Radio Client Capacity up to 512 clients per radio (Radio1 and Radio2)
Warranty
Cellular Co-existence Yes
Limited Lifetime Warranty Yes
LED Off Mode Yes
12

FortiAP 831F
Radio 1 Radio 2 Radio 3
2.4 GHz Tx Power Rx Sensitivity 5 GHz Tx Power Rx 2.4 GHz Tx Power Rx Sensitivity 5 GHz Tx Power Rx Sensitivity
Data rate per chain (dBm) (dBm) per Chain (dBm) Sensitivity(dBm) per chain (dBm) (dBm) per Chain (dBm) (dBm)
802.11b
1 Mbps 21 -98 — — 21 -96 — —
11 Mbps 23 -89 — — 18 -87 — —
802.11g
6 Mbps 20 -94 — — 20 -92 — —
54 Mbps 22 -75 — — 18 -73 — —
802.11n HT20
MCS0 20 -93 — — 20 -91 — —
MCS7 20 -74 — — 17 -72 — —
802.11n HT40
MCS0 17 -92 — — 19 -90 — —
MCS7 18 -73 — — 17 -71 — —
802.11ax HE20
MCS0 21 -90 — — — — — —
MCS11 17 -71 — — — — — —
802.11ax HE40
MCS0 17 -88 — — — — — —
MCS11 17 -68 — — — — — —
802.11a
6 Mbps — — 20 -92 — — 20 -90
54 Mbps — — 20 -72 — — 17.5 -72
802.11n HT20
MCS0 — — 20 -91 — — 20 -90
MCS7 — — 19 -72 — — 17.5 -71
802.11n HT40
MCS0 — — 20 -88 — — 19 -88
MCS7 — — 18 -69 — — 16.5 -69
802.11ac VHT20
MCS0 — — 20 -91 — — 19 -90
MCS9 — — 19 -67 — — 17.5 -67
802.11ac VHT40
MCS0 — — 20 -88 — — 19 -88
MCS9 — — 18 -62 — — 16 -62
802.11ac VHT80
MCS0 — — 18 -85 — — 18 -85
MCS9 — — 17 -59 — — 16 -58
802.11ax HE20
MCS0 — — 20 -90 — — — —
MCS11 — — 18 -66 — — — —
802.11ax HE40
MCS0 — — 20 -87 — — — —
MCS11 — — 18 -61 — — — —
802.11ax HE80
MCS0 — — 18 -94 — — — —
MCS11 — — 17 -58 — — — —
13
FAP 831F Antenna Radiation Patterns
Radio1 2.4 GHz Horizontal Radio1 2.4 GHz Vertical
Radio2 5.0 GHz Horizontal Radio2 5.0 GHz Vertical
Scanning Radio Horizontal Scanning Radio Vertical
BLE Radio Horizontal BLE Radio Vertical
14
Highlights
FortiAP 431F and 433F

These enterprise class 802.11ax indoor APs provide three radios and four spacial streams.
These top-of-the-line access points provide OFDMA, a 2.5 Gigabit Ethernet port, plus an
additional 1 Gbps Ethernet port for PoE diversity. The APs can provide 24/7 scanning across
both bands while still providing access on both the 2.4 GHz and 5 GHz bands. The integrated
BLE radio can be used for beacons and locationing applications.
802.11ax | Tri-Radio 2.4 GHz + 5 GHz + scanning | 5 Internal/External Antennas
FAP-433F FAP-431F
15
Specifications
FortiAP 431F FortiAP 433F FortiAP-431F FortiAP-433F
Hardware Wireless Monitoring Capabilities
Hardware Type Indoor AP Indoor AP Rogue Scan Radio Mode Background, Dedicated Background, Dedicated
Number of Radios 3 + 1 BLE 3 + 1 BLE WIPS / WIDS RAdio Modes Background, Dedicated (recommended)
Number of Antennas 5 Internal + 1 BLE Internal 5 External (RP-SMA) + 1 BLE Packet Sniffer Mode Yes Yes
Internal
Spectrum Analyzer Yes Yes
Antenna Type and Peak PIFA: 4 dBi for 2.4 GHz, 5 Omni directional rubber
Gain dBi for 5 GHz duck antenna: 4 dBi for 2.4 Dimensions
GHz, 6 dBi for 5 GHz Length x Width x Height 8.27 x 8.27 x 2.22 inches (210 x 210 x 56.5 mm)
Frequency Bands (GHz)* 2.400–2.4835, 5.150–5.250, 5.250–5.350, 5.470–5.725, Weight 2.16 lbs (0.98 kg) 2.19 lbs (0.995 kg)
5.725–5.850
Package (shipping) Weight 3.97 lbs (1.8 kg) 4.4 lbs (2 kg)
Radio 1 Capabilities Frequency Band: 2.4 GHz
Channel width: 4x4 20/40 MHz Accessories
Modulation: BPSK, QPSK, QAM64, QAM256, and QAM1024 Mounting Options Ceiling, T-Rail, and Wall Ceiling, T-Rail, and Wall
MIMO chains: 4x4 service
Included Accessories Mount kit for Ceiling, T-Rail Mount kit for Ceiling, T-Rail
Radio 2 Capabilities Frequency Band: 5.0 GHz and Wall and Wall. 5 RP-SMA Male
Channel width: 4x4 20/40/80MHz and 2x2 160MHz dual-band dipole antenna
contiguous
Modulation: BPSK, QPSK, QAM64, QAM256, and QAM1024 Power Supply SP-FAP400-PA-XX or SP-FAP400-PA-XX or
Mimo chains: 4x4 service GPI-130 GPI-130
Radio 3 Capabilities Frequency band: 2.4/5.0 GHz Optional Antennas** N/A FANT-04ABGN-0606-O-R
MIMO chains: 1x1 frequency scanning (Professional Installer FANT-04ABGN-0606-P-R
Required for FCC domains)
Maximum Data Rate Radio 1: up to 1147 Mbps Radio 1: up to 1147 Mbps
Radio 2: up to 2402 Mbps Radio 2: up to 2402 Mbps Environment
Radio 3: scan only Radio 3: scan only
Power Consumption (Max) 24.5 W 24.5 W
Bluetooth Low Energy Bluetooth scanning and iBeacon advertisement @ 6 dBm
Radio PoE Mode 802.3at PoE default
max TX power
1 port powered by 802.3at or 2 ports powered by 802.3af -
Interfaces 1x 100/1000/2500 Base-T RJ45,
Full System functionality + USB support
1 x 10/100/1000 Base-T RJ45,
1x Type A USB, 1x RS-232 RJ45 Serial Port 1 port is connected to 802.3af - No USB support, Operate
in 2x2 mode with reduced power R1/R2 17dBm(Tx power)
Humidity 5–90% Non-Condensing 5–90% Non-Condensing
Simultaneous SSIDs Up to 8 per client serving radio (7 if background scanning
is enabled) Operating / Storage 32–113°F (0–45°C) / -31–-94°F (-35–70°C)
Temperature
EAP Type(s) EAP-TLS, EAP-TTLS/MSCHAPv2, PEAPv0/EAP-MSCHAPv2,
PEAPv1/EAP-GTC, EAP-SIM, EAP-AKA, EAP-FAST Directives Low Voltage Directive • Low Voltage Directive •
RoHS RoHS
User/Device Authentication WPA™, WPA2™, and WPA3™ with 802.1x or Preshared key,
WEP, Web Captive Portal, MAC blocklist and allowlist UL2043 Plenum Material No No
Maximum Tx Power Radio 1: 2.4 GHz 24 dBm / 251 mW (4 chains combined)* Mean Time Between >10 Years >10 Years
(Conducted) Failures
Radio 2: 5 GHz 23 dBm / 200 mW (4 chains combined)*
Radio 3: NA IP Rating — —
Kensington Lock Yes Yes Surge Protection Built In No No
IEEE Standards 802.11a, 802.11b, 802.11d, 802.11e, 802.11g, 802.11h, Hit-less PoE Failover Yes Yes
802.11i,802.11j, 802.11k, 802.11n, 802.11r, 802.11u, 802.11v,
802.11w, 802.11ac, 802.11ax (Wi-Fi 6), 802.1Q, 802.1X, Certifications
802.3ad, 802.3af, 802.3at, 802.3az, 802.3bz Wi-Fi Alliance Certified Yes (includes Passpoint) Yes (includes Passpoint)
SSID Types Supported Local-Bridge, Mesh, Tunnel Local-Bridge, Mesh, Tunnel DFS FCC, IC, CE, Japan, Brazil FCC, IC, CE, Japan, Brazil
Per Radio Client Capacity 512 per Radio1 and Radio2 512 per Radio1 and Radio2 and Taiwan and Taiwan
Cellular Co-existence Yes Yes Warranty

Reset Button Yes Yes Limited Lifetime Warranty Yes Yes
Advanced 802.11 Features compliance laws.
OFDMA Yes (UL and DL) Yes (UL and DL)
** Refer to the Fortinet Antenna datasheet here.
2.4 GHz OFDMA Yes Yes
Spatial Reuse (BSS Yes Yes
Coloring)
HE-MU-MIMO Yes Yes
UL-MU-MIMO 802.11ax Yes Yes
mode
DL-MU-MIMO Yes Yes
Enhanced Target Wake Yes Yes
Time (TWT)
ZeroWait DFS /Agile DFS No No
16

FortiAP 431F / 433F
Radio 1 Radio 2 Radio 3
2.4 GHz Tx Power Rx Sensitivity 5 GHz Tx Power Rx Sensitivity 2.4 GHz Tx Power Rx Sensitivity 5 GHz Tx Power Rx Sensitivity
Data rate per chain (dBm) (dBm) per Chain (dBm) (dBm) per chain (dBm) (dBm) per Chain (dBm) (dBm)
802.11b
1 Mbps 23 -98 — — 20 -96 — —
11 Mbps 23 -89 — — 18 -87 — —
802.11g
6 Mbps 23 -94 — — 20 -92 — —
54 Mbps 22 -75 — — 18 -73 — —
802.11n HT20
MCS0 22 -93 — — 20 -91 — —
MCS7 20 -74 — — 17 -72 — —
802.11n HT40
MCS0 20 -92 — — 19 -90 — —
MCS7 18 -73 — — 17 -71 — —
802.11ax HE20
MCS0 22 -90 — — — — — —
MCS11 17 -71 — — — — — —
802.11ax HE40
MCS0 19 -88 — — — — — —
MCS11 17 -68 — — — — — —
802.11a
6 Mbps — — 20 -92 — — 20 -90
54 Mbps — — 20 -72 — — 17.5
802.11n HT20
MCS0 — — 20 -91 — — 20 -90
MCS7 — — 19 -72 — — 17.5 -71
802.11n HT40
MCS0 — — 20 -88 — — 19 -88
MCS7 — — 18 -69 — — 16.5 -69
802.11ac VHT20
MCS0 — — 20 -91 — — 19 -90
MCS9 — — 19 -67 — — 17.5 -67
802.11ac VHT40
MCS0 — — 20 -88 — — 19 -88
MCS9 — — 18 -62 — — 16 -62
802.11ac VHT80
MCS0 — — 18 -85 — — 18 -85
MCS9 — — 17 -59 — — 16 -58
802.11ax HE20
MCS0 — — 20 -90 — — — —
MCS11 — — 18 -66 — — — —
802.11ax HE40
MCS0 — — 20 -87 — — — —
MCS11 — — 18 -61 — — — —
802.11ax HE80
MCS0 — — 18 -94 — — — —
MCS11 — — 17 -58 — — — —
17
FAP-431F
H-Plane Pattern E-Plane Pattern
Z
(E-Plane)
Y
FLOOR
(H-Plane) X
FAP-433F
Z
(E-Plane)
Y
FLOOR
(H-Plane) X
18
Highlights
FortiAP 432F
This enterprise class 802.11ax ruggedized indoor/outdoor AP provides three radios and four
spacial streams. As a top-of-the-line Wi-Fi 6 access point it provides OFDMA, a 2.5 Gigabit
Ethernet port, plus an additional 1 Gbps Ethernet port with PoE out. The AP can provide 24/7
scanning across both bands while still providing access on both the 2.4 GHz and 5 GHz bands.
The integrated BLE radio can be used for beacons and locationing applications.
802.11ax | Tri-Radio 2.4 GHz + 5 GHz + scanning | 6 External Antennas
FAP-432F
19
Specifications
FortiAP 432F FortiAP 432F
Hardware Type Ruggedized indoor/outdoor AP Rogue Scan radio modes Background, Dedicated
Number of Radios 3 + 1 BLE WIPS / WIDS radio modes Background, Dedicated (recommended)
Number of Antennas 4 dual band WiFi + 1 dual band scanning + 1 single band Packet Sniffer Mode Yes
2.4 GHz BLE/ZigBee
Antenna Type and Peak WiFi and scanning radio dual band antenna: 5.5 dBi in
Gain Dimensions
2.4 GHz and 7.2 dBi in 5 GHz band
BLE antenna: 5.0 dBi in 2.4 GHz band Length x Width x Height 8.23 x 8.23 x 2.38 inches (209 x 209 x 60.5 mm)
Frequency Bands (GHz)* 2.400–2.4835, 5.150–5.250, 5.250–5.350, 5.470–5.725, Weight 5.12 lbs (2.325 kg)
5.725–5.850
Package (shipping) Weight 12.56.93 lbs (5.7 kg)
Radio 1 Capabilities Frequency band: 2.4 GHz
Accessories
Modulation: BPSK, QPSK, 64/256/1024 QAM Mounting Options Wall and Pole
MIMO Chains: 4x4 Service
Included Accessories Wall and Pole mounting kit
Power Supply 802.3bt PoE, ships with PoE injector (reset functionality)
Channel width: 4x4 20/40/80MHz and 2x2 160 MHz
contiguous Optional Antennas** FANT-04ABGN-0606-O-N
Modulation: BPSK, QPSK, QAM64, QAM256, and QAM1024 (Professional Installer FANT-04ABGN-1414-P-N
MIMO Chains: 4x4 Service FANT-04ABGN-8065-P-N
Radio 3 Capabilities Frequency bands: 2.4 GHz and 5.0 GHz Environment
MIMO Chains: 1x1 Frequency Scanning PSE functionality Yes (while powered by PoE injector shipped with product)
Maximum Data Rate Radio 1: up to 1147 Mbps Power Consumption 25 W without PSE out and 37.9 W with PSE out
Radio 2: up to 2402 Mbps (Maximum)
Radio 3: Frequency scanning only
PoE Mode 802.3bt PoE default (ships with Passive PoE injector
Radio Powered by 802.3at PoE - Operate in 4x4 mode with
max TX power
reduced Tx power Radio1/R2 17dBm
Interfaces 1x 100/1000/2500 Base-T RJ45, 1 x 10/100/1000 Base-T
This product only supports PSE functionality when it is
RJ45 (802.3af PoE PSE), 1x RS-232 RJ45 Serial Port
powered by PoE injector that ships with the product.
Humidity 10%-90% non condensing
Operating / Storage -40°–140°F (-40°-60°C) / -40°–176°F (-40°–80°C)
is enabled) Temperature
EAP Type(s) EAP-TLS, EAP-TTLS/MSCHAPv2, PEAPv0/EAP-MSCHAPv2, Directives Low Voltage Directive • RoHS
UL2043 Plenum Material No
User/Device Authentication WPA™, WPA2™, and WPA3™ with 802.1x or preshared key,
WEP, Web Captive Portal, MAC blocklist & allowlist Mean Time Between > 10 Years
Failures
Maximum Tx Power Radio 1: 2.4 GHz 30 dBm / 1000 mW (4 chains combined)*
(Conducted) IP Rating IP67
Radio 2: 5 GHz 26 dBm / 398 mW (4 chains combined)*
Radio 3: N/A Surge Protection Built In Yes
Kensington Lock No Hit-less PoE Failover N/A
IEEE Standards 802.11a, 802.11b, 802.11d, 802.11e, 802.11g, 802.11h, Certifications

802.11i,802.11j, 802.11k, 802.11n, 802.11r, 802.11u, 802.11v,
WiFi Alliance Certified Yes (includes Passpoint)
802.11w, 802.11ac, 802.11ax (Wi-Fi 6), 802.1Q, 802.1X,
802.3ad, 802.3af, 802.3at, 802.3az, 802.3bt, 802.3bz DFS FCC, IC, CE, Japan, Brazil and Taiwan
SSIDs Supported Local-Bridge, Tunnel, and Mesh Warranty
Per Radio Client Capacity Up to 512 clients per radio (Radio1 and Radio2) Limited Lifetime Warranty Yes
Cellular Co-existence Yes * Frequency selection and power may be restricted to abide by regional regulatory
LED Off Mode Yes compliance laws.
Advanced 802.11 Features
OFDMA Yes (UL and DL)
Spatial Reuse (BSS Yes
Coloring)
UL MU-MIMO Yes
DL-MU-MIMO Yes
Enhanced Target Wake Yes
Time (TWT)
ZeroWait DFS No
20

FortiAP 432F
Radio 1 Radio 2 Radio 3 Scanning
2.4 GHz Tx Power 5 GHz Tx Power per 2.4 GHz Tx Power 5 GHz Tx Power per
Data rate per chain (dBm) Rx Sensitivity (dBm) Chain (dBm) Rx Sensitivity (dBm) per chain (dBm) Chain (dBm) Rx Sensitivity (dBm)
802.11b
1 Mbps 24 -99 — — 20 — -92
11 Mbps 24 -91 — — 18 — -91
802.11g
6 Mbps 24 -94 — — 20 — -92
54 Mbps 23 -78 — — 18 — -77
802.11n HT20
MCS0 24 -94 — — 20 — -92
MCS7 23 -75 — — 17 — -74
802.11n HT40
MCS0 23 -92 — — 19 — -90
MCS7 22 -73 — — 17 — -72
802.11ax HE20
MCS0 23 -90 — — — — —
MCS11 21 -71 — — — — —
802.11ax HE40
MCS0 21 -91 — — — — —
MCS11 19 -72 — — — — —
802.11a
6 Mbps — — 22 -92 — 20 -93
54 Mbps — — 22 -76 — 19 -76
802.11n HT20
MCS0 — — 22 -93 — 20 -93
MCS7 — — 21 -74 — 19 -73
802.11n HT40
MCS0 — — 22 -91 — 19 -90
MCS7 — — 21 -72 — 18 -71
802.11ac VHT20
MCS0 — — 22 -91 — 19 -93
MCS9 — — 20 -72 — 18 -69
802.11ac VHT40
MCS0 — — 22 -91 — 19 -90
MCS9 — — 19 -72 — 16 -64
802.11ac VHT80
MCS0 — — 20 -86 — 17 -88
MCS9 — — 17 -62 — 17 -61
802.11ax HE20
MCS0 — — 22 -91 — — —
MCS11 — — 19 -72 — — —
802.11ax HE40
MCS0 — — 22 -91 — — —
MCS11 — — 19 -72 — — —
802.11ax HE80
MCS0 — — 20 -87 — — —
MCS11 — — 18 -58 — — —
21

FAP-432F
Z
(E-Plane)
Y
FLOOR
(H-Plane) X
22
Highlights
FortiAP 432FR
This enterprise class 802.11ax ruggedized indoor/outdoor/industrial AP provides three radios
and four spacial streams. As a top-of-the-line Wi-Fi 6 access point it provides OFDMA, a
2.5 Gigabit Ethernet port, plus an additional 1 Gbps Ethernet port with PoE out. The AP can
provide 24/7 scanning across both bands while still providing access on both the 2.4 GHz and
5 GHz bands. The integrated BLE radio can be used for beacons and locationing applications.
FAP-432FR is ideal for hazardous environments such as oil rigs, industrial manufacturing, and
transportation sites.
802.11ax | Tri-Radio 2.4 GHz + 5 GHz + scanning | 6 External Antennas
FAP-432FR
FAP-432FR
23
Specifications
FortiAP 432FR FortiAP 432FR
Hardware Type Indoor / Outdoor / Industrial AP Rogue Scan radio modes Background, Dedicated
Number of Radios 3 + 1 BLE WIPS / WIDS radio modes Background, Dedicated (recommended)
Number of Antennas 4 dual band WiFi + 1 dual band scanning + 1 single band Packet Sniffer Mode Yes
2.4 GHz BLE/ZigBee
Antenna Type and Peak WiFi and scanning radio dual band antenna: 5.5 dBi in
Gain Dimensions
2.4 GHz and 7.2 dBi in 5 GHz band
BLE antenna: 5.0 dBi in 2.4 GHz band Length x Width x Height 8.23 x 8.23 x 2.38 inches (209 x 209 x 60.5 mm)
Frequency Bands (GHz)* 2.400–2.4835, 5.150–5.250, 5.250–5.350, 5.470–5.725, Weight 5.12 lbs (2.325 kg)
5.725–5.850
Package (shipping) Weight 12.56.93 lbs (5.7 kg)
Accessories
Modulation: BPSK, QPSK, 64/256/1024 QAM Mounting Options Wall and Pole
Power Supply 802.3bt PoE, ships with PoE injector (reset functionality)
Channel width: 4x4 20/40/80MHz and 2x2 160 MHz
contiguous Optional Antennas** FANT-04ABGN-0606-O-N
Modulation: BPSK, QPSK, QAM64, QAM256, and QAM1024 (Professional Installer FANT-04ABGN-1414-P-N
MIMO Chains: 4x4 Service FANT-04ABGN-8065-P-N
Radio 3 Capabilities Frequency bands: 2.4 GHz and 5.0 GHz Environment
MIMO Chains: 1x1 Frequency Scanning PSE functionality Yes (while powered by PoE injector shipped with product)
Maximum Data Rate Radio 1: up to 1147 Mbps Power Consumption 25 W without PSE out and 37.9 W with PSE out
Radio 2: up to 2402 Mbps (Maximum)
PoE Mode 802.3bt PoE default (ships with Passive PoE injector
Radio Powered by 802.3at PoE - Operate in 4x4 mode with
max TX power
reduced Tx power Radio1/R2 17dBm
Interfaces 1x 100/1000/2500 Base-T RJ45, 1 x 10/100/1000 Base-T
This product only supports PSE functionality when it is
RJ45 (802.3af PoE PSE), 1x RS-232 RJ45 Serial Port
powered by PoE injector that ships with the product.
Humidity 10%-90% non condensing
is enabled) Temperature
EAP Type(s) EAP-TLS, EAP-TTLS/MSCHAPv2, PEAPv0/EAP-MSCHAPv2, Directives Low Voltage Directive • RoHS
User/Device Authentication WPA™, WPA2™, and WPA3™ with 802.1x or preshared key,
WEP, Web Captive Portal, MAC blocklist & allowlist Mean Time Between > 10 Years
Failures
Maximum Tx Power Indoor / Outdoor / Industrial:
(Conducted) IP Rating IP67
Radio 1: 2.4 GHz 29 dBm / 794 mW (4 chains combined)*
Radio 2: 5 GHz 28 dBm / 630 mW (4 chains combined)* Surge Protection Built In Yes
Radio 3: N/A
Hit-less PoE Failover N/A
Kensington Lock No
Certifications
IEEE Standards 802.11a, 802.11b, 802.11d, 802.11e, 802.11g, 802.11h,
FCC/ISED
802.11i,802.11j, 802.11k, 802.11n, 802.11r, 802.11u, 802.11v,
CE Marked
802.11w, 802.11ac, 802.11ax (Wi-Fi 6), 802.1Q, 802.1X,
UKCA Marked
802.3ad, 802.3af, 802.3at, 802.3az, 802.3bt, 802.3bz
AS/NZS
SSIDs Supported Local-Bridge, Tunnel, and Mesh Radio Equipment Directive (RED) 2014/53/EU
UL/IEC/EN 62368-1
Per Radio Client Capacity Up to 512 clients per radio (Radio1 and Radio2)
IEC 60529
Cellular Co-existence Yes Class I Division 2 (CID2)
EN 50385
LED Off Mode Yes
EN 62311
Advanced 802.11 Features Radio Equipment Directive 2014/53/EU
(RED)
OFDMA Yes (UL and DL)
WiFi Alliance Certified Yes (includes Pass point)
Spatial Reuse (BSS Yes
Coloring) DFS In Process
UL MU-MIMO Yes Warranty
DL-MU-MIMO Yes Limited Lifetime Warranty Yes
Enhanced Target Wake Yes
Time (TWT) * Frequency selection and power may be restricted to abide by regional regulatory
compliance laws.
ZeroWait DFS No
24

FortiAP 432FR
802.11b
1 Mbps 24 -99 — — 20 — -92
11 Mbps 24 -91 — — 18 — -91
802.11g
6 Mbps 24 -94 — — 20 — -92
54 Mbps 23 -78 — — 18 — -77
802.11n HT20
MCS0 24 -94 — — 20 — -92
MCS7 23 -75 — — 17 — -74
802.11n HT40
MCS0 23 -92 — — 19 — -90
MCS7 22 -73 — — 17 — -72
802.11ax HE20
MCS0 23 -90 — — — — —
MCS11 21 -71 — — — — —
802.11ax HE40
MCS0 21 -91 — — — — —
MCS11 19 -72 — — — — —
802.11a
6 Mbps — — 22 -92 — 20 -93
54 Mbps — — 22 -76 — 19 -76
802.11n HT20
MCS0 — — 22 -93 — 20 -93
MCS7 — — 21 -74 — 19 -73
802.11n HT40
MCS0 — — 22 -91 — 19 -90
MCS7 — — 21 -72 — 18 -71
802.11ac VHT20
MCS0 — — 22 -91 — 19 -93
MCS9 — — 20 -72 — 18 -69
802.11ac VHT40
MCS0 — — 22 -91 — 19 -90
MCS9 — — 19 -72 — 16 -64
802.11ac VHT80
MCS0 — — 20 -86 — 17 -88
MCS9 — — 17 -62 — 17 -61
802.11ax HE20
MCS0 — — 22 -91 — — —
MCS11 — — 19 -72 — — —
802.11ax HE40
MCS0 — — 22 -91 — — —
MCS11 — — 19 -72 — — —
802.11ax HE80
MCS0 — — 20 -87 — — —
MCS11 — — 18 -58 — — —
25

FAP-432FR
Z
(E-Plane)
Y
FLOOR
(H-Plane) X
26
Highlights
FortiAP 231F
This enterprise class Wi-Fi 6 indoor AP provides three radios and two spacial streams, as well
as features such as OFDMA and dual 1 Gbps Ethernet ports. The AP can provide 24/7 scanning
across both bands while still providing access on both the 2.4 GHz and 5 GHz bands. The
integrated BLE radio can be used for beacons and locationing applications.
802.11ax | Tri-Radio 5 GHz + 2.4 GHz + scanning | 3 Antennas
2x2 MU-MIMO | Up to 574 Mbps + 1201 Mbps + scanning
FAP-231F
27
Specifications
Hardware Type Indoor AP OFDMA Yes (UL and DL)
Number of Antennas 3 Dual band Internal Wi-Fi + 1 BLE/ZigBee UL MU-MIMO 802.11ax mode Yes
Antenna Type and Peak Gain Omni Directional antenna DL-MU-MIMO Yes
Dual band: 4.5dBi for 2.4Ghz and 5.5dBi for 5GHz
BLE antenna 4.0dBi at 2.4GHz band (TWT)
Frequency Bands (GHz)* 2.400–2.4835, 5.150–5.250, 5.250–5.350, 5.470–5.725, ZeroWait DFS/Agile DFS No
5.725–5.850
Wireless Monitoring Capabilities
Channel width: 20/40MHz Rogue Scan radio modes Background, Dedicated
Modulation: BPSK, QPSK, 64/256/1024 QAM WIPS / WIDS radio modes Background, Dedicated (recommended)
Packet Sniffer Mode Yes
Channel width: 20/40/80MHz Spectrum Analyzer Yes
Modulation: BPSK, QPSK, 64/256/1024 QAM Dimensions
Length x Width x Height 6.0 x 6.0 x 2.86 inches (153.2 x 153.2 x 53.0 mm)
Radio 3 Capabilities Frequency bands: 2.4GHz and 5.0GHz
MIMO Chains: 1x1 Frequency Scanning Weight 1.0 lbs (0.543 kg)
Maximum Data Rate Radio 1: up to 574 Mbps Package (shipping) Weight 2.1lbs (0.95 kg)
Radio 2: up to 1201 Mbps Accessories
Mounting Options Ceiling, T-Rail, and Wall
Included Accessories Standard Mount kit for Ceiling, T-Rail, and Wall
dBm max TX power
Power Supply SP-FAP200-PA-XX, or SP-FAP250-PA-10, or 802.3at
Interfaces 2x 10/100/1000 Base-T RJ45, 1x Type 2.0 USB, 1x RS-
PoE GPI-130
232 RJ45 Serial Port
Environment
Power Consumption (Maximum) 17W
Simultaneous SSIDs Up to 8 per client serving radio (7 if background
scanning is enabled) PoE Mode 802.3at PoE default
EAP Type(s) EAP-TLS, EAP-TTLS/MSCHAPv2, PEAPv0/EAP- 1 port powered by 802.3at - full system functionality
MSCHAPv2, PEAPv1/EAP-GTC, EAP-SIM, EAP-AKA, + USB support
EAP-FAST 1 port is connected to 802.3af - no USB support
User/Device Authentication WPA™, WPA2™, and WPA3™ with 802.1x or Preshared Humidity 5%-90% non condensing
key, WEP, Web Captive Portal, MAC blocklist & allowlist
Operating / Storage 32°–122°F (0°-50°C) / -22°–158°F (-30°–70°C)
Maximum Tx Power Radio 1: 2.4GHz: 23 dBm / 200 mW (2 chains Temperature
(Conducted) combined)*
Radio 2: 5GHz: 22 dBm / 158 mW (2 chains
combined)* UL2043 Plenum Material No
Radio 3: NA
Mean Time Between Failures > 10 Years
Kensington Lock Yes
IP Rating N/A
Surge Protection Built In No
802.11i, 802.11j, 802.11k, 802.11n, 802.11r, 802.11u,
802.11v, 802.11w, 802.11ac, 802.11ax, 802.1Q, 802.1X, Hit-less PoE Failover N/A
802.3ad, 802.3af, 802.3at, 802.3az
Certifications
SSID Types Supported Local-Bridge, Tunnel, and Mesh
DFS FCC, IC, CE, Japan, Brazil, Taiwan and Korea
Warranty
Reset Button Yes
LED Off Mode Yes
compliance laws.
28

FortiAP 231F
Radio 1 Radio 2
2.4 GHz Rx Sensitivity 5 GHz Rx Sensitivity
Data rate Tx Power per chain (dBm) (dBm) Tx Power per Chain (dBm) (dBm)
802.11b
1 Mbps 21 -99 — —
11 Mbps 21 -90 — —
802.11g
6 Mbps 20 -94 — —
54 Mbps 20 -77 — —
802.11n HT20
MCS0 19 -94 — —
MCS7 18 -76 — —
802.11n HT40
MCS0 19 -92 — —
MCS7 19 -73 — —
802.11ax HE20
MCS0 19 -94 — —
MCS11 17 -65 — —
802.11ax HE40
MCS0 19 -91 — —
MCS11 16 -63 — —
802.11a
6 Mbps — — 22 -94
54 Mbps — — 21 -77
802.11n HT20
MCS0 — — 21 -94
MCS7 — — 19 -76
802.11n HT40
MCS0 — — 21 -91
MCS7 — — 19 -73
802.11ac VHT20
MCS0 — — 21 -94
MCS9 — — 18 -72
802.11ac VHT40
MCS0 — — 21 -91
MCS9 — — 18 -68
802.11ac VHT80
MCS0 — — 19 -88
MCS9 — — 17 -64
802.11ax HE20
MCS0 — — 21 -94
MCS11 — — 17 -64
802.11ax HE40
MCS0 — — 21 -91
MCS11 — — 17 -62
802.11ax HE80
MCS0 — — 19 -88
MCS11 — — 16 -58
29

FAP-231F
Z
(E-Plane)
Y
FLOOR
(H-Plane) X
30
Highlights
FortiAP 234F
This enterprise class Wi-Fi 6 ruggedized indoor/outdoor AP provides three radios with internal
antennas and two spacial streams, as well as features such as OFDMA and dual 1 Gbps
Ethernet ports. The AP can provide 24/7 scanning across both bands while still providing
access on both the 2.4 GHz and 5 GHz bands. The integrated BLE radio can be used for
beacons and locationing applications.
802.11ax | Tri-Radio 5 GHz + 2.4 GHz + scanning | 2 5G antenna + 2 2.4G antenna + 1 dual band
antenna + 1 single band 2.4 Ghz BLE/Zigbee
FAP-234F
31
Specifications
Hardware Type Ruggedized indoor/outdoor AP OFDMA Yes (UL and DL)
Number of Antennas 2 dual band WiFi + 1 dual band scanning + 1 single UL MU-MIMO Yes
band
DL-MU-MIMO Yes
2.4 GHz BLE/ZigBee
Antenna Type and Peak Gain Directional patch antenna (TWT)
Single band antennas: 10 dBi in 2.4 GHz band, 10 dBi
in 5.0 GHz band ZeroWait DFS No
Scanning radio: 3.5 dBi in 2.4 GHz band and 4.5 dBi in Wireless Monitoring Capabilities
5 GHz band
BLE antenna: 3.5 dBi in 2.4 GHz band Rogue Scan radio modes Background, Dedicated
Antenna Beam Width 2.4GHz Horizontal BW 70 degree Vertical BW 30 WIPS / WIDS radio modes Background, Dedicated (recommended)
degree Packet Sniffer Mode Yes
5.0GHz Horizontal BW 78 degree Vertical BW 25
degree Spectrum Analyzer Yes
Frequency Bands (GHz)* 2.400–2.4835, 5.150–5.250, 5.250–5.350, 5.470–5.725, Dimensions

5.725–5.850 Length x Width x Height 12.45 x 8.6 x 1.66 inches (316 x 218 x 42 mm)
Radio 1 Capabilities Frequency band: 2.4GHz Weight 2.88 lbs (1.307 kg)
Package (shipping) Weight 7.93 lbs (3.6 kg)
MIMO Chains: 2x2 Service Accessories
Radio 2 Capabilities Frequency band: 5.0GHz Mounting Options Wall and Pole
Channel width: 20/40/80MHz
MIMO Chains: 2x2 Service Power Supply 802.3at PoE: GPI-130 ; ships with PoE Injector (reset
functionality)
Radio 3 Capabilities Frequency bands: 2.4 GHz and 5.0 GHz
MIMO Chains: 1x1 Frequency Scanning Environment
Maximum Data Rate Radio 1: up to 574 Mbps PSE functionality No
Power Consumption (Maximum) 15.5 W
PoE Mode 802.3at PoE default( Ships with Passive PoE injector)
dBm max TX power 1 port powered by 802.3at or 2 ports powered by
802.3af - Full System functionality
Interfaces 2x 10/100/1000 Base-T RJ45, 1x RS-232 RJ45 Serial
Port 1 port is connected to 802.3af - No USB support,
Operate in 2x2 mode with reduced Tx power R1/R2
MDI/MDIX Supported Supported 17dBm
Simultaneous SSIDs Up to 8 per client serving radio (7 if background Humidity 10%-90% non condensing
EAP Type(s) EAP-TLS, EAP-TTLS/MSCHAPv2, PEAPv0/EAP- Temperature
MSCHAPv2, PEAPv1/EAP-GTC, EAP-SIM, EAP-AKA,
EAP-FAST
User/Device Authentication WPA™, WPA2™, and WPA3™ with 802.1x or Preshared
key, WEP, Web Captive Portal, MAC blocklist & allowlist Mean Time Between Failures > 10 Years
Maximum Tx Power Radio 1: 2.4 GHz: 27 dBm / 500 mW (2 chains IP Rating IP67
(Conducted) combined)*
Surge Protection Built In Yes
Radio 2: 5 GHz: 25.5 dBm / 354 mW (2 chains
combined)* Hit-less PoE Failover N/A
Radio 3: N/A
Certifications
Kensington Lock No
802.11i, 802.11j, 802.11k, 802.11n, 802.11r, 802.11u,
802.11v, 802.11w, 802.11ac, 802.11ax (Wi-Fi 6), 802.1Q, Warranty
802.1X, 802.3ad, 802.3af, 802.3at, 802.3az
Per Radio Client Capacity Up to 512 clients per radio (Radio1 and Radio2) compliance laws.
LED Off Mode Yes
32

FortiAP 234F
802.11b
1 Mbps 24 -99 — — 20 — -92
11 Mbps 24 -91 — — 18 — -91
802.11g
6 Mbps 24 -95 — — 20 — -92
54 Mbps 23 -78 — — 18 — -77
802.11n HT20
MCS0 24 -94 — — 20 — -92
MCS7 23 -78 — — 17 — -74
802.11n HT40
MCS0 23 -92 — — 19 — -90
MCS7 22 -74 — — 17 — -72
802.11ax HE20
MCS0 23 -90 — — — — —
MCS11 21 -71 — — — — —
802.11ax HE40
MCS0 21 -91 — — — — —
MCS11 19 -72 — — — — —
802.11a
6 Mbps — — 21 -93 — 20 -93
54 Mbps — — 21 -77 — 19 -76
802.11n HT20
MCS0 — — 21 -91 — 20 -93
MCS7 — — 20 -72 — 19 -73
802.11n HT40
MCS0 — — 21 -91 — 19 -90
MCS7 — — 20 -72 — 18 -71
802.11ac VHT20
MCS0 — — 20 -91 — 19 -93
MCS9 — — 18 -72 — 18 -69
802.11ac VHT40
MCS0 — — 19 -87 — 19 -90
MCS9 — — 17 -64 — 16 -64
802.11ac VHT80
MCS0 — — 22 -91 — 17 -88
MCS9 — — 19 -72 — 17 -61
802.11ax HE20
MCS0 — — 22 -91 — — —
MCS11 — — 19 -72 — — —
802.11ax HE40
MCS0 — — 22 -91 — — —
MCS11 — — 19 -72 — — —
802.11ax HE80
MCS0 — — 20 -89 — — —
MCS11 — — 18 -59 — — —
33

FAP-234F
34
Highlights
FortiAP 23JF
This enterprise class Wi-Fi 6 wall plate AP provides three radios with internal antennas and
two spacial streams, as well as features such as OFDMA and is PSE-capable. The AP can
provide 24/7 scanning across both bands while still providing access on both the 2.4 GHz and
5 GHz bands. The integrated BLE radio can be used for beacons and locationing applications.
Additional features include PoE out for downstream devices and RJ45 passthrough. This
access point can be installed in minutes, right over the existing wall plate , or with the optional
desk mount, makes a perfect remote / work from home AP.
802.11ax | Tri-Radio 5 GHz + 2.4 GHz + scanning | 3 Antennas
FAP-23JF
35
Specifications
FortiAP 23JF FortiAP 23JF
Hardware Type Indoor walljack/desktop AP OFDMA Yes (UL and DL)
Number of Antennas 3 dual band internal Wi-Fi + 1 single band 2.4 GHz UL MU-MIMO Yes
BLE/ZigBee
DL-MU-MIMO Yes
Antenna Type and Peak Gain PCB antenna
Dual band: 4.0 dBi in 2.4 GHz (TWT)
band and 4.0 dBi in 5 GHz band
BLE antenna: 3.5 dBi in 2.4 GHz band ZeroWait DFS No
Frequency Bands (GHz)* 2.400–2.4835, 5.150–5.250, 5.250–5.350, 5.470–5.725, Wireless Monitoring Capabilities
5.725–5.850 Rogue Scan radio modes Background, Dedicated
Radio 1 Capabilities Frequency band: 2.4 GHz WIPS / WIDS radio modes Background, Dedicated (recommended)
Channel width: 20/40 MHz
Modulation: BPSK, QPSK, 64/256/1024 QAM Packet Sniffer Mode Yes
MIMO Chains: 2x2 Service Spectrum Analyzer Yes
Radio 2 Capabilities Frequency band: 5.0 GHz Dimensions
Channel width: 20/40/80 MHz
Modulation: BPSK, QPSK, 64/256/1024 QAM Length x Width x Height 6.6 x 4.6 x 1.1 inches (168 x 117 x 28 mm)
MIMO Chains: 2x2 Service Weight 0.99 lbs (0.45 kg)
Radio 3 Capabilities Frequency bands: 2.4 GHz and 5.0 GHz Package (shipping) Weight 1.54 lbs (0.7 kg)
MIMO Chains: 1x1 Frequency Scanning
Accessories
Maximum Data Rate Radio 1: up to 574 Mbps
Mounting Options Wall Plate, Optional Desk Mount FAP-MNT-WJ-20
Radio 3: Frequency scanning only Included Accessories Standard Mount kit for Ceiling, T-Rail, and Wall
Bluetooth Low Energy Radio Bluetooth scanning and iBeacon advertisement @ 10 Power Supply 802.3at PoE: GPI-130
dBm max TX power Optional DC power adaptor SP-FAP23J-PA-10
Interfaces 4x 10/100/1000 Base-T RJ45 Ports (1x 802.3at Environment
PoE(PD), 1x 802.3af PoE (PSE), 2x Non-PoE Ports)
PSE functionality Yes
3 RJ-45 Ports (1xPass-through in, 1x Pass-through out,
1x RS-232 Serial Port) Power Consumption (Maximum) 17.5W without PSE out and 31W with PSE out
MDI/MDIX Supported Supported PoE Mode 802.3at PoE default( optional DC adaptor)
Powered via DC power supply - Full System
Simultaneous SSIDs Up to 8 per client serving radio (7 if background
functionality + USB + PSE (8023af 15.4W)
Powered by 802.3af - Only Radio functionality is
EAP Type(s) EAP-TLS, EAP-TTLS/MSCHAPv2, PEAPv0/EAP-
operational (No USB/PSE supported)
MSCHAPv2, PEAPv1/EAP-GTC, EAP-SIM, EAP-AKA,
EAP-FAST Powered by 802.3at - Full System functionality+
PSE(7w)
User/Device Authentication WPA™, WPA2™, and WPA3™ with 802.1x or preshared
key, WEP, Web Captive Portal, MAC blocklist & allowlist Humidity 10%-90% non condensing
Maximum Tx Power Radio 1: 2.4 GHz: 25 dBm / 158 mW (2 chains Operating / Storage 32°–122°F (0°-50°C) / -22°–158°F (-30°–70°C)
(Conducted) Temperature
combined)*
Radio 2: 5 GHz: 21 dBm / 158 mW (2 chains Directives Low Voltage Directive • RoHS
combined)*
Radio 3: N/A
Mean Time Between Failures > 10 Years
Kensington Lock Yes
IP Rating N/A
802.11i,802.11j, 802.11k, 802.11n, 802.11r, 802.11u, Surge Protection Built In No
802.11v, 802.11w, 802.11ac, 802.11ax (Wi-Fi 6), 802.1Q,
Hit-less PoE Failover N/A
802.1X, 802.3ad, 802.3af, 802.3at, 802.3az
Certifications
Warranty
LED Off Mode Yes

compliance laws.
36

FortiAP 23JF
802.11b
1 Mbps 22 -98 — — 20 — -92
11 Mbps 20 -90 — — 18 — -91
802.11g
6 Mbps 22 -93 — — 20 — -92
54 Mbps 20 -77 — — 18 — -77
802.11n HT20
MCS0 22 -94 — — 20 — -92
MCS7 20 -76 — — 17 — -74
802.11n HT40
MCS0 22 -92 — — 19 — -90
MCS7 20 -73 — — 17 — -72
802.11ax HE20
MCS0 22 -90 — — — — —
MCS11 20 -71 — — — — —
802.11ax HE40
MCS0 20 -90 — — — — —
MCS11 18 -70 — — — — —
802.11a
6 Mbps — — 18 -93 — 20 -91
54 Mbps — — 18 -77 — 19 -75
802.11n HT20
MCS0 — — 19 -94 — 20 -90
MCS7 — — 19 -75 — 19 -72
802.11n HT40
MCS0 — — 21 -91 — 19 -90
MCS7 — — 20 -72 — 18 -71
802.11ac VHT20
MCS0 — — 21 -91 — 19 -93
MCS9 — — 20 -72 — 18 -69
802.11ac VHT40
MCS0 — — 20 -91 — 19 -90
MCS9 — — 18 -72 — 16 -64
802.11ac VHT80
MCS0 — — 19 -87 — 17 -88
MCS9 — — 17 -64 — 17 -61
802.11ax HE20
MCS0 — — 20 -91 — — —
MCS11 — — 18 -72 — — —
802.11ax HE40
MCS0 — — 19 -91 — — —
MCS11 — — 17 -62 — — —
802.11ax HE80
MCS0 — — 18 -89 — — —
MCS11 — — 16 -60 — — —
37

FAP-23JF
Z
(E-Plane)
Y
FLOOR
(H-Plane) X
38
Highlights
FortiAP 221E and 223E

The FortiAP 221E and 223E are medium-density 802.11ac Wave 2 access points and provides
two radio and two spacial streams. These enterprise-class access points are ideal for medium-
density environments such as an office or classroom with performance throughput of up to
867 Mbps.
802.11ac Wave 2 | Dual Radio 2.4 and 5 GHz | 4 Internal/External Antennas
2x2 MU-MIMO | Up to 400 + 867 Mbps
FAP-221E
FAP-223E
39
Specifications
FortiAP 221E FortiAP 223E FortiAP 221E FortiAP 223E

Hardware Type Indoor AP Indoor AP Rogue Scan Radio Modes Background, Dedicated Background, Dedicated
Number of Radios 2 + 1 BLE 2 + 1 BLE WIPS / WIDS Radio Modes Background, Dedicated Background, Dedicated
Number of Antennas 4 Internal + 1 Internal BLE 4 External + 1 Internal BLE Packet Sniffer Mode Yes Yes
Antenna Type and Peak Patch: 4 dBi for 2.4 GHz, Dipole: 4 dBi for 2.4 GHz, Spectrum Analyzer Yes Yes
Gain 5 dBi for 5 GHz 5 dBi for 5 GHz
Dimensions
Frequency Bands (GHz)* 2.400–2.4835, 5.150–5.250, 5.250–5.350, 5.470–5.725,
5.725–5.850 Length x Width x Height 6.3 x 6.3 x 1.85 inches (160 x 160 x 47 mm)
Radio 1 Capabilities 2.4 GHz b/g/n (2x2:2 2.4 GHz b/g/n (2x2:2 Weight 1.1 lbs (0.5 kg) 1.1 lbs (0.5 kg)
stream) stream) Package (shipping) 4.95 lbs (2.2 kg) 5.3 lbs (2.4 kg)
20/40 MHz (256 QAM) 20/40 MHz (256 QAM) Weight
Radio 2 Capabilities 5 GHz a/n/ac (2x2:2 stream) 5 GHz a/n/ac (2x2:2 stream) Accessories
20/40/80 MHz (256 QAM) 20/40/80 MHz (256 QAM)
Mounting Options Ceiling, T-Rail, and Wall Ceiling, T-Rail, and Wall
Maximum Data Rate Radio 1: up to 400 Mbps Radio 1: up to 400 Mbps
Included Accessories Mount kits for Ceiling, T-Rail, Mount kits for Ceiling, T-Rail,
Radio 2: up to 867 Mbps Radio 2: up to 867 Mbps
and Wall and Wall, 4 dipole antennas
Radio max TX power Power Supply SP-FAP200-PA-XX, GPI-115, or GPI-130
Interfaces 1x 10/100/1000 Base-T RJ45 1x 10/100/1000 Base-T RJ45 Environment
MDI/MDIX Supported Supported Power Consumption 12.36 W 12.36 W

(Max.)
Power over Ethernet IEEE 802.3af IEEE 802.3af
(PoE) Humidity 5%–90% non-condensing 5%–90% non-condensing
Simultaneous SSIDs Up to 8 per client serving radio (7 if background scanning is Operating / Storage -4°–113°F (-20°–45°C) / -40°–158°F (-40°–70°C)
enabled) Temperature
EAP Type(s) EAP-TLS, EAP-TTLS/MSCHAPv2, PEAPv0/EAP-MSCHAPv2, Directives Low Voltage Directive • Low Voltage Directive •
PEAPv1/EAP-GTC, EAP-SIM, EAP-AKA, EAP-FAST RoHS RoHS
User/Device WPA™, WPA2™, and WPA3™ with 802.1x or preshared key, UL2043 Plenum Material No No
Authentication WEP, Mean Time Between >30 Years >30 Years
Web Captive Portal, MAC blocklist & allowlist Failures
Maximum Tx Power 2.4 GHz: 23 dBm / 200 mW (2 chains combined)* IP Rating — —
5 GHz: 24 dBm / 251 mW (2 chains combined)*
Surge Protection Built In — —
Kensington Lock Yes Yes
Hit-less PoE Failover No No
IEEE Standards 802.11a, 802.11b, 802.11d, 802.11e, 802.11g, 802.11h, 802.11i,
802.11j, 802.11k, 802.11n, 802.11r, 802.11u, 802.11v, 802.11w, Certifications
802.11ac, 802.1Q, 802.1X, 802.3af, 802.3az
Wi-Fi Alliance Certified Yes (includes Passpoint) Yes (includes Passpoint)
SSID Types Supported Local-Bridge, Tunnel, Mesh Local-Bridge, Tunnel, Mesh
DFS FCC, IC, CE, Japan, Taiwan, FCC, IC, CE, Japan, Taiwan.
Per Radio Client Capacity Up to 512 Up to 512 Korea Korea
Cellular Co-existence Yes Yes Warranty

Reset Button Yes Yes Limited Lifetime Warranty Yes Yes
LED Off Mode Yes Yes * Frequency selection and power may be restricted to abide by regional regulatory
compliance laws.
Advanced 802.11 Features
802.11ac Wave 2 MU- Yes Yes
MIMO
Transmit Beam Forming Yes Yes
(TxBF)
Low-Density Parity Check Yes Yes
(LDPC) Encoding
Maximum Likelihood Yes Yes
Demodulation (MLD)
Maximum Ratio Yes Yes
Combining (MRC)
A-MPDU and A-MSDU Yes Yes
Packet Aggregation
MIMO Power Save Yes Yes
Short Guard Interval Yes Yes
40

FortiAP 221E / 223E FortiAP 221E / 223E
RADIO 1 RADIO 2 RADIO 1 RADIO 2
2.4 GHz 5 GHz 2.4 GHz 5 GHz
Tx Power Rx Sensitivity Tx Power Rx Sensitivity Tx Power Rx Sensitivity Tx Power Rx Sensitivity
Data rate (dBm) (dBm) (dBm) (dBm) Data rate (dBm) (dBm) (dBm) (dBm)
802.11 a/g 802.11ac VHT40
6 Mbps 20 -93 21 -91 MCS 0 19 -89 20 -88
9 Mbps 20 -91 21 -90 MCS 1 19 -86 20 -85
12 Mbps 20 -90 21 -89 MCS 2 19 -84 20 -82
18 Mbps 19 -88 21 -86 MCS 3 18 -81 20 -79
24 Mbps 19 -85 21 -83 MCS 4 17 -77 20 -76
36 Mbps 18 -82 21 -80 MCS 5 17 -73 20 -72
48 Mbps 18 -77 19 -76 MCS 6 17 -71 19 -70
54 Mbps 17 -75 19 -74 MCS 7 17 -69 19 -69
802.11n HT20 MCS 8 17 -68 18 -65
MCS 0/8/16 20 -91 21 -91 MCS 9 16 -66 17 -64
MCS 1/9/17 19 -89 21 -88 802.11ac VHT80
MCS 2/10/18 19 -86 21 -86 MCS 0 — — 19 -85
MCS 3/11/19 18 -83 21 -83 MCS 1 — — 19 -83
MCS 4/12/20 18 -80 21 -79 MCS 2 — — 19 -80
MCS 5/13/21 17 -75 21 -75 MCS 3 — — 19 -77
MCS 6/14/22 17 -73 19 -74 MCS 4 — — 19 -74
MCS 7/15/23 16 -71 19 -72 MCS 5 — — 19 -71
802.11n HT40 MCS 6 — — 18 -69
MCS 0/8/16 19 -89 20 -88 802.11acVHT80
MCS 1/9/17 19 -86 20 -85 MCS 7 — — 18 -68
MCS 2/10/18 18 -84 20 -82 MCS 8 — — 17 -63
MCS 3/11/19 18 -81 20 -79 MCS 9 — — 17 -61
MCS 4/12/20 17 -77 20 -76
MCS 5/13/21 17 -73 20 -72
MCS 6/14/22 16 -71 19 -70
MCS 7/15/23 16 -69 19 -69
802.11ac VHT20
MCS 0 19 -91 21 -91
MCS 1 19 -89 21 -88
MCS 2 19 -86 21 -86
MCS 3 18 -83 21 -83
MCS 4 18 -80 21 -79
MCS 5 18 -76 21 -75
MCS 6 18 -73 19 -74
MCS 7 18 -71 19 -72
MCS 8 18 -68 18 -69
41

FAP-221E
Z
(E-Plane)
Y
FLOOR
(H-Plane) X
FAP-223E
Z
(E-Plane)
Y
FLOOR
(H-Plane) X
42
Ordering Information
Product SKU Description

FortiAP 431G FAP-431G Indoor Wireless AP - Tri radio (Wi-Fi-6E IEEE 802.11ax Tri-band 2.4/5/6GHz and dual 5G operation 4+4+4 4 streams 3 radios), internal
antennas, 2x 5G Base-T RJ45, BT/BLE, 1x Type A USB, 1x RS-232 RJ45 Serial Port. Ceiling/wall mount kit included. For power order:
802.3bt PoE injector or AC adapter SP-FAP400-PA. SP-FAP-250-PA.
FC-10-PG431-247-02-DD FortiCare Premium Support.
FC-10-PG431-284-02-DD FortiCare Elite Support.
FC-10-PG431-595-02-DD FortiSASE subscription for cloud managed FortiAP with 2 Mbps bandwidth included.
FortiAP 433G FAP-433G Indoor Wireless AP - Tri radio (Wi-Fi-6E IEEE 802.11ax Tri-band 2.4/5/6GHz and dual 5G operation 4+4+4 4 streams 3 radios), external
antennas, 2x 5G Base-T RJ45, BT/BLE, 1x Type A USB, 1x RS-232 RJ45 Serial Port. Ceiling/wall mount kit included. For power order:
802.3bt PoE injector or AC adapter SP-FAP400-PA. SP-FAP-250-PA. Region Code A.
FortiAP 231G FAP-231G Indoor Wireless AP - Tri radio (Wi-Fi-6E IEEE 802.11ax Tri-band 2.4/5/6GHz and dual 5G operation 2+2+2 2 streams 3 radios), internal
antennas, 1x10/100/1000 RJ45 , 1x 100/1000/2500 Base-T RJ45, BT/BLE, 1x Type A USB, 1x RS-232 RJ45 Serial Port. Ceiling/wall mount
kit included. For power order: 802.3at PoE injector GPI-130 or AC adapter SP-FAP200-PA.
FortiAP 233G FAP-233G Indoor Wireless AP - Tri radio (Wi-Fi-6E IEEE 802.11ax Tri-band 2.4/5/6GHz and dual 5G operation 2+2+2 2 streams 3 radios), external
antennas, 1x10/100/1000 RJ45 , 1x 100/1000/2500 Base-T RJ45, BT/BLE, 1x Type A USB, 1x RS-232 RJ45 Serial Port. Ceiling/wall mount
kit included. For power order: 802.3at PoE injector GPI-130 or AC adapter SP-FAP200-PA.
FortiAP 831F FAP-831F Indoor Wireless AP - Tri radio (1x 802.11 a/b/g/n/ac/ax 4x4 MIMO, 1x 802.11 a/b/g/n/ac/ax 8x8 MIMO and 1x 802.11 a/b/g/n/ac Wave
2 1x1 MU-MIMO), internal antennas, 1x 100/1000/5000 Base-T RJ45, 1x 10/100/1000 Base-T RJ45, BT/BLE, 1x Type A USB, 1x RS-232
RJ45 Serial Port. Ceiling/wall mount kit included. For power order 802.3at PoE injector GPI-130 or AC adapter SP-FAP400-PA.
FC-10-F831F-247-02-DD FortiCare Premium Support.
FC-10-P831F-284-02-DD FortiCare Elite Support.
FC-10-P831F-595-02-DD FortiSASE subscription for cloud managed FortiAP with 2 Mbps bandwidth included.
FortiAP 431F FAP-431F Indoor Wireless AP - Tri radio (2x 802.11 a/b/g/n/ac/ax, 4x4 MIMO and 1x 802.11 a/b/g/n/ac Wave 2, 1x1 MU-MIMO), internal antennas,
1x 100/1000/2500 Base-T RJ45, 1x 10/100/1000 Base-T RJ45, BT/BLE, 1x Type A USB, 1x RS-232 RJ45 Serial Port. Ceiling/wall mount kit
included. For power order 802.3at PoE injector GPI-130 or AC adapter SP-FAP400-PA.
FC-10-F431F-284-02-DD FortiCare Elite Support.
FC-10-F431F-595-02-DD FortiSASE subscription for cloud managed FortiAP with 2 Mbps bandwidth included.
FortiAP 433F FAP-433F Indoor Wireless AP - Tri radio (2x 802.11 a/b/g/n/ac/ax, 4x4 MIMO and 1x 802.11 a/b/g/n/ac Wave 2, 1x1 MU-MIMO), external antennas
included, 1x 100/1000/2500 Base-T RJ45, 1x 10/100/1000 Base-T RJ45, BT/BLE, 1x Type A USB, 1x RS-232 RJ45 Serial Port. Ceiling/wall
mount kit included. For power order 802.3at PoE injector GPI-130 or AC adapter SP-FAP400-PA.
FC-10-F433F-284-02-DD FortiCare Elite Support.
FC-10-F433F-595-02-DD FortiSASE subscription for cloud managed FortiAP with 2 Mbps bandwidth included.
FortiAP 432F FAP-432F Ruggedized indoor/outdoor Wireless FortiAP - Tri radio (1x 802.11b/g/n/ax 4x4 radio, 1 x 802.11a/n/ac/ax 4x4 Radio and 1x 802.11
a/b/g/n/ac Wave 2, 2x2), 1x 100/1000/2500 Base-T RJ45, 1x 10/100/1000 Base-T RJ45, BT/BLE + Zigbee, 1x Type A USB, 1x RS-232
RJ45 Serial Port. External Dual Band N-Type Omnidirectional antennas, Integrated mounting bracket for Antenna included + Wall/Pole
Mount mounting kit. Ships with passive PoE injector.
FC-10-PF432-247-02-DD FortiCare Premium Support.
FC-10-PF432-284-02-DD FortiCare Elite Support.
FC-10-PF432-595-02-DD FortiSASE subscription for cloud managed FortiAP with 2 Mbps bandwidth included.
FortiAP 432FR FAP-432FR UL Class 1, Division 2 .Outdoor Wireless FortiAP - Tri radio (1x 802.11b/g/n/ax 4x4 radio, 1 x 802.11a/n/ac/ax 4x4 Radio and 1x 802.11
a/b/g/n/ac Wave 2, 2x2), 1x 10/100/1000/2500 Base-T RJ45, 1x 10/100/1000 Base-T RJ45, BT/BLE + Zigbee, 1x Type A USB, 1x RS-232
RJ45 Serial Port. External Dual Band N-Type Omni Directional antennas, Integrated mounting bracket for Antenna included + Wall/Pole
Mount mounting kit. For power order: 802.3at PoE injector GPI-130 or AC adapter SP-FAP400-PA.
FC-10-FR432-247-02-DD FortiCare Premium Support.
FC-10-FR432-284-02-DD FortiCare Elite Support.
FC-10-FR432-595-02-DD FortiSASE subscription for cloud managed FortiAP with 2 Mbps bandwidth included.
43
Ordering Information
Product SKU Description

FortiAP 231F FAP-231F Indoor Wireless AP - Tri radio (802.11 b/g/n/ax 2x2 MU-MIMO, 802.11 a/n/ac/ax 2x2 MU-MIMO and 1x 802.11 a/b/g/n/ac Wave 2, 1x1 ),
internal antennas, 2x 10/100/1000 RJ45 port, BT/BLE, 1x Type A USB, 1x RS-232 RJ45 Serial Port. Ceiling/wall mount kit included. For
power order 802.3at PoE injector GPI-130 or AC adapter SP-FAP250-PA-10.
FC-10-PF231-247-02-DD FortiCare Premium Support.
FC-10-PF231-284-02-DD FortiCare Elite Support.
FC-10-PF231-595-02-DD FortiSASE subscription for cloud managed FortiAP with 2 Mbps bandwidth included.
FortiAP 234F FAP-234F Outdoor Wireless AP - Tri radio (802.11 b/g/n/ax 2x2 MU-MIMO, 802.11 a/n/ac/ax 2x2 MU-MIMO and 1x 802.11 a/b/g/n/ac Wave 2, 1x1 ),
internal antennas, 2x 10/100/1000 RJ45 port, BT/BLE, 1x Type A USB, 1x RS-232 RJ45 Serial Port. Pole/wall mount kit and PoE injector
included. Region Code A.
FC-10-P234F-247-02-DD FortiCare Premium Support.
FC-10-P234F-284-02-DD FortiCare Elite Support.
FC-10-P234F-595-02-DD FortiSASE subscription for cloud managed FortiAP with 2 Mbps bandwidth included.
FortiAP 23JF FAP-23JF Wall Plate AP - Tri radio (802.11 b/g/n/ax 2x2 MU-MIMO, 802.11 a/n/ac/ax 2x2 MU-MIMO and 1x 802.11 a/b/g/n/ac Wave 2, 1x1), internal
antennas, 4 x 10/100/1000 RJ45 port (1x 802.3at PoE PD, 1x 802.3af PoE PSE, 2x Non-PoE Ports), 2 RJ-45 Ports (1xPass-through in, 1x
Pass-through out), BT / BLE, 1x RS-232 RJ45 Serial Port. Wall plate mounting kit included. For power order 802.3at PoE injector GPI-130.
Optional Accessory AC power adapter SP-FAP23J-PAX-10; Desktop stand FAP-MNT-WJ-20.
FC-10-P23JF-247-02-DD FortiCare Premium Support.
FC-10-P23JF-284-02-DD FortiCare Elite Support.
FC-10-P23JF-595-02-DD FortiSASE subscription for cloud managed FortiAP with 2 Mbps bandwidth included.
FortiAP 221E FAP-221E Indoor Wireless AP - Dual radio (802.11 b/g/n and 802.11 a/n/ac Wave 2, 2x2 MU-MIMO), internal antennas, 1 x 10/100/1000 RJ45 port,
BT / BLE. Ceiling/wall mount kit included. For power order 802.3af PoE injector GPI-115 or AC adapter SP-FAP200-PA.
FC-10-PE221-247-02-DD FortiCare Premium Support.
FC-10-PE221-284-02-DD FortiCare Elite Support.
FortiAP 223E FAP-223E Indoor Wireless AP - Dual radio (802.11 b/g/n and 802.11 a/n/ac Wave 2, 2x2 MU-MIMO), external antennas included, 1 x 10/100/1000
RJ45 port, BT / BLE. Ceiling/wall mount kit included. For power order 802.3af PoE injector GPI-115 or AC adapter SP-FAP200-PA.
FC-10-PE223-247-02-DD FortiCare Premium Support.
FC-10-PE223-284-02-DD FortiCare Elite Support.
FortiLAN Cloud FC-10-90AP1-639-02-DD FortiLAN Cloud FortiAP Management License Includes: Full suite of FortiAP Management Features, 1 year Log Retention, FortiCare
Premium (Note, FortiCare only applicable when used with FortiLAN Cloud).
Gigabit PoE Injector GPI-115 1-port Gigabit PoE power injector, 802.3af 15.4 W, 10/100/1000.
GPI-130 1-port Gigabit PoE power injector, 802.3at up to 30 W.
GPI-145 1-port Multi-Gigabit PoE power injector, 802.3bt up to 60W.
Power Adapter SP-FAP400-PA AC power adapter 12v, 3.0A - 36W for FAP-231G, FAP-233G, FAP-431G, FAP-433G, FAP-831F, FAP-431F, FAP-433F, and FAP-C24JE.
SP-FAP200-PA AC power adapter 12v, 2.5A - 30W for FAP-221E, and FAP-223E.
SP-FAP23J-PA-10 AC power adapter 48v, 1.04A - 50W without power cord for FAP-23JF.
SP-FAP250-PA-10 AC power adapter 12v, 4.0A - 48W with Extended operating temp 0°C - 50°C with US and EU plugs for FAP-U231F, FAP-231F, FAP-431G,
and FAP-433G.
Desktop Stand FAP-MNT-WJ-20 Desktop stand for FAP/FAP-C/FAP-U wall jack style APs. Converts wall mounting hardware included with unit to desktop mounting -
20 pack.
Notes.
1.Additional external antenna options available for some models. See antenna datasheet for details.
2.A country suffix code (-A, -B, -C, -D, -E, -F, -I, -J, -K, -N, -P, -S, -T, -U, -V, -W, or -Y) applies to all AP models based upon country of deployment.
Work with your local supplier for the correct model in your regulatory domain.
3.Access Points mentioned in this datasheet are covered by a Limited Lifetime Hardware Warranty.
Terms and conditions can be found in the EULA at https://www.fortinet.com/content/dam/fortinet/assets/legal/EULA.pdf
For more information on Support levels, please reference FortiCare Services here.
44
Fortinet CSR Policy
Fortinet is committed to driving progress and sustainability for all through cybersecurity,
with respect for human rights and ethical business practices, making possible a digital
world you can always trust. You represent and warrant to Fortinet that you will not
use Fortinet’s products and services to engage in, or support in any way, violations
or abuses of human rights, including those involving illegal censorship, surveillance,
detention, or excessive use of force. Users of Fortinet products are required to comply
with the Fortinet EULA and report any suspected violations of the EULA via the
procedures outlined in the Fortinet Whistleblower Policy.
www.fortinet.com
Copyright © 2023 Fortinet, Inc. All rights reserved. Fortinet®, FortiGate®, FortiCare® and FortiGuard®, and certain other marks are registered trademarks of Fortinet, Inc., and other Fortinet names herein may also be registered and/or common law trademarks of Fortinet. All other product
or company names may be trademarks of their respective owners. Performance and other metrics contained herein were attained in internal lab tests under ideal conditions, and actual performance and other results may vary. Network variables, different network environments and other
conditions may affect performance results. Nothing herein represents any binding commitment by Fortinet, and Fortinet disclaims all warranties, whether express or implied, except to the extent Fortinet enters a binding written contract, signed by Fortinet’s General Counsel, with a purchaser
that expressly warrants that the identified product will perform according to certain expressly-identified performance metrics and, in such event, only the specific performance metrics expressly identified in such binding written contract shall be binding on Fortinet. For absolute clarity, any
such warranty will be limited to performance in the same ideal conditions as in Fortinet’s internal lab tests. Fortinet disclaims in full any covenants, representations, and guarantees pursuant hereto, whether express or implied. Fortinet reserves the right to change, modify, transfer, or otherwise
revise this publication without notice, and the most current version of the publication shall be applicable.
November 2, 2023
FAP-DAT-R56-20231102

Forti AP Series Datasheet

Uploaded by

Document Informationclick to expand document information

Document Informationclick to expand document information

Copyright:

Available Formats

Forti AP Series Datasheet

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Forti AP Series Datasheet

Uploaded by

Copyright:

Available Formats

Data Sheet

FortiLAN Cloud- or FortiGate-Managed Access Points

• Unified management console

Branch Office / SD-Branch

*FortiGate-managed installations only.

FortiAP 431G and 433G

Wi-Fi 6E | Tri-Radio 2.4 + 5GHz + 5GHz / 6GHz / Scanning | 8 Internal Antennas /

4x4 MU-MIMO | Up to 1148 Mbps + 2402 Mbps + 4804 Mbps

Radio 2 Capabilities Frequency band: 5.0GHz Accessories

EAP Type(s) EAP-TLS, EAP-TTLS/MSCHAPv2, EAPv0/EAP-MSCHAPv2, IP Rating N/A N/A

Kensington Lock Yes Yes Limited Lifetime Yes Yes

RF Rx/Tx Performance Table

FORTIAP 431G / 433G

MCS7 19 -77 -74

MCS11 19 -62 -72

MCS0 22 -93 21 -93

Maximum capability of the Hardware provided (Excluding antenna gain)

Antenna Radiation Patterns

Radio3 2.45GHz plots FAP-433G Radio3 antenna plots

110 -30 250

100 -40 260

Radio3 5.5GHz plots FAP-433G Radio3 antenna plots

Radio3 6.5GHz plots FAP-433G Radio3 antenna plots

BLE/ZigBee 2.45GHz plots FAP-433G BLE/ZigBee antenna plots

BLE/ZigBee 2.45GHz Horizontal BLE/ZigBee 2.45GHz Vertical

90 -45 270 90 -45 270

FortiAP 231G and 233G

2x2 MU-MIMO | Up to 574 Mbps + 1201 Mbps + 2402 Mbps

Frequency Bands (GHz)* 2.400–2.4835, 5.150–5.250, 5.250–5.350, 5.470–5.725, Dimensions

EAP Type(s) EAP-TLS, EAP-TTLS/MSCHAPv2, EAPv0/EAP-MSCHAPv2, IP Rating N/A N/A

Kensington Lock Yes Yes Warranty

RF Rx/Tx Performance Table

MCS7 21 -75 -74

Maximum capability of the Hardware provided (Excluding antenna gain)

Antenna Radiation Patterns

Radio3 2.45GHz plots FAP-233G Radio3 antenna plots

Radio3 5.5GHz plots FAP-233G Radio3 antenna plots

Radio3 6.5GHz plots FAP-233G Radio3 antenna plots

BLE/ZigBee 2.45GHz plots FAP-233G BLE/ZigBee antenna plots

802.11ax | Tri-Radio 2.4 GHz + 5 GHz + scanning | 13 Internal Antennas

8x8 MU-MIMO | Up to 1147 Mbps + 4804 Mbps

RF Rx/Tx Performance Table

FAP 831F Antenna Radiation Patterns

Radio1 2.4 GHz Horizontal Radio1 2.4 GHz Vertical

Radio2 5.0 GHz Horizontal Radio2 5.0 GHz Vertical

Scanning Radio Horizontal Scanning Radio Vertical

BLE Radio Horizontal BLE Radio Vertical

FortiAP 431F and 433F

802.11ax | Tri-Radio 2.4 GHz + 5 GHz + scanning | 5 Internal/External Antennas

4x4 MU-MIMO | Up to 1147 Mbps + 2402 Mbps

Kensington Lock Yes Yes Surge Protection Built In No No

Cellular Co-existence Yes Yes Warranty

RF Rx/Tx Performance Table

Antenna Radiation Patterns

802.11ax | Tri-Radio 2.4 GHz + 5 GHz + scanning | 6 External Antennas

4x4 MU-MIMO | Up to 1147 Mbps + 2402 Mbps

Kensington Lock No Hit-less PoE Failover N/A

IEEE Standards 802.11a, 802.11b, 802.11d, 802.11e, 802.11g, 802.11h, Certifications