GL XX Mobilgrease XHP Mine Series

Mobilgrease XHP™ Mine Series Page 1 of 3
Mobilgrease XHP™ Mine Series

Mobil Grease , United States
Premium Lithium Complex Grease with Molybdenum Disulfide
Product Description
The Mobilgrease XHP™ Mine products are specifically designed for the lubrication of extra heavy-duty off-highway and mining equipment. With a
complete range of NLGI Grades, this series of lithium complex greases, which contain 5% molybdenum disulfide, can be utilized over a wide range of
operating conditions and temperatures to improve productivity. The Mobilgrease XHP Mine series has excellent extreme pressure and anti-wear
properties in addition to exceptional staying power, very good water wash-out, water spray-off, and extended service capabilities under harsh operating
conditions. These extra heavy-duty service greases exhibit excellent structural stability. They will not corrode steel or copper bearing alloys and are
compatible with conventional sealing materials.
Mobilgrease XHP 320 Mine, 321 Mine, and 322 Mine were developed especially for their superior performance in bucket pins, pivot pins, and heavily
loaded chassis components. Mobilgrease XHP 100 Mine and 320 Mine are especially suited for heavy equipment central lubrication systems requiring an
NLGI 0 Grade grease. Mobilgrease XHP 100 Mine and 320 Mine are recommended by ExxonMobil for use in central lubrication systems found on
off-highway and mining equipment. Mobilgrease XHP 100 Mine exhibits good dispensability down to -50°C (-58°F). Mobilgrease XHP 321 Mine is a NLGI
1 Grade with very good low temperature pumpability developed for use in colder temperatures. Mobilgrease XHP 322 Mine is a NLGI 2 Grade for use as a
general purpose chassis lube.
Features and Benefits
Mobilgrease XHP 100 Mine, 320 Mine, 321 Mine, and 322 Mine are leading members of the Mobilgrease brand of products, which has gained a
reputation for innovation and performance excellence. The Mobilgrease XHP Mine Series is designed by ExxonMobil formulation technologists and
backed by our worldwide technical support staff.
Mobilgrease XHP 100 Mine, 320 Mine, 321 Mine, and 322 Mine were specifically designed to meet the needs of off-highway and mining equipment that
required exceptional EP / anti-wear performance and which would remain in place even in tough conditions of water spray, high sliding, and high
temperatures. These greases offer the following features, advantages, and potential benefits:
Features Advantages and Potential Benefits
Superb equipment protection and potential equipment life extension

Excellent EP and anti-wear properties
even in severe operating conditions
Optimum equipment protection in high sliding mechanisms and with

High level of molybdenum disulfide
extended re-lubrication intervals
Ensures proper lubrication and protection even in hostile work

Exceptional resistance to water washout and spray-off
environments
Very good low temperature pumpability and centralized system capability Provides excellent low temperature pumpability and start-up
(Mobilgrease XHP 100 Mine and 320 Mine) performance, a key feature for remote applications
Applications
Mobilgrease XHP 100 Mine, 320 Mine, 321 Mine, and 322 Mine are recommended for severe off-highway and mining applications in terms of operational
severity and water spray. Specific applications include:
• Bucket pins, pivot pins, and heavily loaded chassis components
• Heavy equipment central lubrication systems
• General purpose chassis lubrication
10.10.2023
Properties and Specifications
MOBILGREASE XHP MOBILGREASE XHP MOBILGREASE XHP MOBILGREASE XHP

Property
100 MINE 320 MINE 321 MINE 322 MINE
Grade NLGI 0 NLGI 0 NLGI 1 NLGI 2
Thickener Type Lithium Complex Lithium Complex Lithium Complex Lithium Complex
Color, Visual Gray-Black Gray-Black Gray-Black Gray-Black
Copper Strip Corrosion, 24 h, 100 C, Rating,

1A 1A 1A 1A
ASTM D4048
Corrosion Preventive Properties, Rating,

Pass Pass Pass Pass
ASTM D1743
Dropping Point, °C, ASTM D2265 200 270 270 270
Four-Ball Extreme Pressure Test, Weld Point,

315 400 400 400
kgf, ASTM D2596
Four-Ball Wear Test, Scar Diameter, mm,

0.4 0.4 0.4 0.4
ASTM D2266
Molybdenum Disulfide Content, wt %,

5 5 5 5
CALCULATED
Penetration, 60X, 0.1 mm, ASTM D217 370 370 325 280
Roll Stability, Penetration Consistency

+14 0 ±10 ±10
Change, 0.1 mm, ASTM D1831
US Steel Mobility @ - 20 F, g/min, AMS 1390 32
US Steel Mobility @ -12 C, g/min, AMS 1390 11
US Steel Mobility @ 20 F, g/min, AMS 1390 15
Viscosity @ 40 C, Base Oil, mm2/s, ASTM

100 320 320 320
D445
Water Sprayoff, Loss, %, ASTM D4049 28 16
Water Washout, Loss @ 79 C, wt%, ASTM

10 2
D1264
Health and Safety
Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims
/psims.aspx
All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.
08-2023
Exxon Mobil Corporation
10.10.2023
22777 Springwoods Village Parkway
Spring TX 77389
1-800-ASK MOBIL (275-6624)
Typical Properties are typical of those obtained with normal production tolerance and do not constitute a specification. Variations that do not affect
product performance are to be expected during normal manufacture and at different blending locations. The information contained herein is subject to
change without notice. All products may not be available locally. For more information, contact your local ExxonMobil contact or visit
www.exxonmobil.com
ExxonMobil is comprised of numerous affiliates and subsidiaries, many with names that include Esso, Mobil, or ExxonMobil. Nothing in this document is
intended to override or supersede the corporate separateness of local entities. Responsibility for local action and accountability remains with the local
ExxonMobil-affiliate entities.
© Copyright 2003-2023 Exxon Mobil Corporation. All

Rights Reserved
10.10.2023

GL XX Mobilgrease XHP Mine Series

Uploaded by

Copyright:

Available Formats

GL XX Mobilgrease XHP Mine Series

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

GL XX Mobilgrease XHP Mine Series

Uploaded by

Copyright:

Available Formats

Mobilgrease XHP™ Mine Series Page 1 of 3

Mobilgrease XHP™ Mine Series

Features and Benefits

Features Advantages and Potential Benefits

Superb equipment protection and potential equipment life extension

Optimum equipment protection in high sliding mechanisms and with

Ensures proper lubrication and protection even in hostile work

Properties and Specifications

MOBILGREASE XHP MOBILGREASE XHP MOBILGREASE XHP MOBILGREASE XHP

Grade NLGI 0 NLGI 0 NLGI 1 NLGI 2

Color, Visual Gray-Black Gray-Black Gray-Black Gray-Black

Copper Strip Corrosion, 24 h, 100 C, Rating,

Corrosion Preventive Properties, Rating,

Dropping Point, °C, ASTM D2265 200 270 270 270

Four-Ball Extreme Pressure Test, Weld Point,

Four-Ball Wear Test, Scar Diameter, mm,

Molybdenum Disulfide Content, wt %,

Roll Stability, Penetration Consistency

US Steel Mobility @ - 20 F, g/min, AMS 1390 32

US Steel Mobility @ -12 C, g/min, AMS 1390 11

US Steel Mobility @ 20 F, g/min, AMS 1390 15

Viscosity @ 40 C, Base Oil, mm2/s, ASTM

Water Sprayoff, Loss, %, ASTM D4049 28 16

Water Washout, Loss @ 79 C, wt%, ASTM

Health and Safety

Exxon Mobil Corporation

© Copyright 2003-2023 Exxon Mobil Corporation. All

You might also like