Scribd Logo
Upload

Welcome to Scribd!

  • 14 views

    ADS Mass Flow Density Gauge UPGRADES

    Uploaded by

    Conrad
    This document is an application data sheet requesting information about a customer's process and measurement requirements for upgrades to their density and mass flow measurement equipment. It requests technical details such as calibration ranges, materials, temperatures, pipe dimensions, power supply information, and options like painting and cables. A sketch of the piping is also requested to accompany the application.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    ADS Mass Flow Density Gauge UPGRADES

    Uploaded by

    Conrad
    14 views2 pages
    This document is an application data sheet requesting information about a customer's process and measurement requirements for upgrades to their density and mass flow measurement equipment. It requests technical details such as calibration ranges, materials, temperatures, pipe dimensions, power supply information, and options like painting and cables. A sketch of the piping is also requested to accompany the application.

    Original Description:

    Prospectus

    Original Title

    ADS-Mass-Flow-Density-Gauge-UPGRADES

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document is an application data sheet requesting information about a customer's process and measurement requirements for upgrades to their density and mass flow measurement equipment. It requests technical details such as calibration ranges, materials, temperatures, pipe dimensions, power supply information, and options like painting and cables. A sketch of the piping is also requested to accompany the application.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    14 views2 pages

    ADS Mass Flow Density Gauge UPGRADES

    Uploaded by

    Conrad
    This document is an application data sheet requesting information about a customer's process and measurement requirements for upgrades to their density and mass flow measurement equipment. It requests technical details such as calibration ranges, materials, temperatures, pipe dimensions, power supply information, and options like painting and cables. A sketch of the piping is also requested to accompany the application.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 2

    QD: 109/09/15

    APPLICATION DATA SHEET: DENSITY / MASSFLOW UPGRADES


    Page 1 of 2
    Quote Reference: Tag:
    Customer: End-User:
    Fax No: Date:
    In order to evaluate the application and to ensure that any equipment subsequently purchased will be compatible with the process
    plant, certain minimum data is required. Please enter the data required on the questionnaire below.
    A free hand sketch of the pipe work with distances to;- bends, pumps, valves etc., should be drawn on the reverse of this data
    sheet.
    PROCESS AND MEASUREMENT DETAILS
    Maximum Normal Minimum
    Calibration range (SGU)
    Process temperature (°C)
    Ambient temperature (°C)
    Process material
    Density of solids (SGU)
    Density of carrying liquid (SGU)
    Pipe material
    Solid Density of Pipe Material
    Pipe outside diameter (mm)
    Pipe Wall thickness per side (mm)
    Pipe liner material
    Solid Density of Pipe Liner Material
    Pipe liner thickness per side (mm)
    Pipe insulation material
    Solid Density of Pipe Insulation Material
    Pipe insulation thickness per side (mm)
    Hazardous location? Yes No (Classification)
    Temperature compensation required? Yes No (Temp. co-efficient)
    More than one different type of material pumped? Yes No (Mark Choice)
    Severe vibration? Yes No (Mark Choice)
    Enclosure protection class IP54 (std) IP55 IP (Mark Choice)
    At the point of density measurement, is the pipeline Vertical or Horizontal? (Vertical Recommended)
    If Vertical Pipeline, is the product flow Vertical Horizontal
    upwards at the point of density measurement ? (Mark Choice) (Mark Choice)
    Yes No (Mark Choice)

    ELECTRONICS REQUIRED
    UniproI to Scintillator detector (Blind Unit) Yes No (Mark Choice)
    Ramsey to Scintillator detector (Blind Unit) Yes No (Mark Choice)
    Ronan to Scintillator detector (Blind Unit) Yes No (Mark Choice)
    Ohmart to Scintillator detector (Blind Unit) Yes No (Mark Choice)
    Krohne to Scintillator detector (Blind Unit) Yes No (Mark Choice)
    RTU – Remote Terminal Unit Yes No (Mark Choice)
    PTU – Portable Terminal Unit Yes No (Mark Choice)
    PTCU – Portable Terminal Connection Unit Yes No (Mark Choice)
    220Vac 110Vac 24Vac
    Power supply available (Mark Choice)
    50 Hz 60 Hz
    OPTIONS
    Special painting? PA Proprietary (Blue) Galvanized Other (as per attached) None
    Stainless steel sensor set? Yes No (Mark Choice)
    Constant voltage transformer required? Yes No (Mark Choice)
    Inter-connecting cable (part 2839/100) required? Yes No Metres
    QD: 109/09/15
    Application Data Sheet: Density / Massflow Upgrades Page 2 of 2

    SOURCE ON SITE – (DETAILS FROM TAGGING PLATE)


    Make: (Source supplied by)
    Date:
    Source size:
    Serial Number:
    Source type: (CS137/Cobalt)
    Pipe Clamps: (Sketch if possible)

    SPECIAL REQUIREMENTS

    SKETCH OF PIPING (Side View)


    or alternatively attach a drawing (ACAD .dwg or .pdf format) of the piping

    DETAILS - RADIATION PROTECTION OFFICER


    Name: Tel no:
    Designation: Fax no:
    E-mail:

    CONFIRMATION OF TECHNICAL DETAILS AS SET OUT ABOVE (requirement of ISO 9000/9001)


    Print Name: Designation:
    Signature: Date:

    FOR OFFICE USE


    Model purchased:
    Detector type to be supplied:
    Isotope activity to be supplied:
    Additional requirements:

    You might also like