Scribd
Upload
87 views3 pages

0IC - C03 Data Load Steps in BW On HANA

This document outlines the steps to load inventory data from an ECC system into the 0IC_C03 InfoCube in BW on HANA. It involves stopping jobs and clearing tables in ECC, running transaction codes to extract the data from different material stock data sources, loading the extracted data into BW using info packages, and setting options to load the data initially and for delta loads. Once loaded, the data is validated by comparing ECC and BW reports.

Uploaded by

m
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
87 views3 pages

0IC - C03 Data Load Steps in BW On HANA

This document outlines the steps to load inventory data from an ECC system into the 0IC_C03 InfoCube in BW on HANA. It involves stopping jobs and clearing tables in ECC, running transaction codes to extract the data from different material stock data sources, loading the extracted data into BW using info packages, and setting options to load the data initially and for delta loads. Once loaded, the data is validated by comparing ECC and BW reports.

Uploaded by

m
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

0IC_C03 Data Load Steps in BW on HANA

113,630
Steps to load 0IC_C03 – Material Stocks/Movements InfoCube in BW on HANA

1. In a small down time interval lock/stop all users/postings in ECC at that time.

Eg: The day is 09-23-2016 @ 11:00:00 AM).


2. STOP V3 JOB’s for 2LIS_03_* DataSources in ECC.
3. Clear Setup tables, RSA7, SMQ1 in ECC and InfoCube data in BW.
4. Execute Tcode MCNB in ECC, under Data destination Info tab, select 2LIS_03_BX
DataSource.

5. Under Data source Info select All Stock Including – non valuated stocks).

6. At the same time (parallel) use Tcode OLI1BW in ECC and give the Posting date range
from 01-09-2016 to 23-09-2016. This is

for 2LIS_03_BF Load.

7. And also you can perform another activity, use Tcode OLIZBW in ECC and give the
Company code and Posting date range from

01-09-2016 to 23-09-2016. This is for 2LIS_03_UM Load.

If you have multiple company code, repeat the step 6 for all company codes using the
same Posting date range selection.
Note:
Step 5 and Step 6 can also perform once the 2LIS_03_BX data load is completed, but
to save and utilize ECC down time, we can
do in parallel. It depends on person to person and project to project and also the
length of ECC down time.

8. Once Step 3 job is completed in ECC then load the data to BW till PSA using
InfoPackage using “Generate Initial Status”

under Update Tab. This is for 2LIS_03_BX Load.

9. Once the PSA load is success then load data to 0IC_C03 Cube using DTP, before
loading data, check the “Extraction” tab in

DTP, under Extraction tab Extraction Mode = “Initial Non-Cumulative for non-
Cumulative values”.

Set this option in DTP and load the data into InfoCube.

10. No compression is required because it’s HANA, you can’t find “Marker update”
option in 0IC_C03 InfoCube.

11. Quickly you can validate the data by comparing data using Tcodes in ECC MB52 or
MB5B and simple BEx report.

12. Once Step 5 job is completed in ECC then load the data to BW till PSA using
InfoPackage using “Initialize Delta Process, with Data Transfer” under Update
Tab. This is for 2LIS_03_BF Load.
13. Once the PSA load is success then load data to 0IC_C03 Cube using DTP, before
loading data, check the “Update” tab in DTP, under Parameters of the InfoCube tab,
CHECK “Historical Transactions” for history loads, because we are loading history data
from 1st September 2016 to 23rd September 2016 to set the DELTA pointer in ECC.

No compression is required because it’s HANA.

Note:

Once you load all history data, then UN-CHECK this option for delta loads.
Once Step 6 job is completed in ECC then load the data to BW till PSA using
InfoPackage using “Initialize Delta Process, with Data Transfer” under Update
Tab. This is for 2LIS_03_UM Load.

14. Once the PSA load is success then load data to 0IC_C03 Cube using DTP, before
loading data, check the “Update” tab in DTP, under Parameters of the InfoCube tab,
CHECK “Historical Transactions” for history loads, because we are loading history data
from 1st September 2016 to 23rd September 2016 to set the DELTA pointer in ECC.

No compression is required because it’s HANA.

Note:
Once you load all history data, then UN-CHECK this option for delta loads.

15. Once data loads are completed then check the BW Data with MB5B/MB51/MB52 Tcodes in
ECC, it will match.

16. To perform all the above steps in small ECC down time period, you must practice
these steps in Quality/Test system prior

to implement in Production system to avoid confusion and get confidence. And also
validate the data in Quality/test system

using different BEx report in BW and MB5B/MB51/MB52 Tcodes in ECC.

17. Once Delta Pointer is set in ECC then load all history data using the above steps
or you can start delta loads,

I prefer first load all history data in weekends and then continue DELTA loads.

18. After all history loads are done then schedule V3 jobs for 2LIS_03_* DataSources
using LBWE Tcode in ECC and continue

DELTA Loads in BW.

Note:
UN-CHECK “Historical Transactions” option in DTP for BF and UM DataSource delta
loads.
FollowLikeRSS Feed
Alert Moderator
Assigned Tags

• BW (SAP Business Warehouse)


• 0ic c03
• 2lis 03 b
• 2lis 03 bf
• 2lis 03 um
• data loads for inventory cube
• inventory

Similar Blog Posts


• SAP BW - Inventory data loading step by step(0IC_C03)
By shakeer bashaFeb 06, 2013
• Re-initialization of the Material Stocks/Movements cube (0IC_C03) with 2LIS_03_BF,
2LIS_03_BX and 2LIS_03_UM in BW 7.x
By Former MemberAug 20, 2012
• Concept of Inventory Management, Full data loading steps and cleaning process, and
Data Testing of Inventory Data in SAP BW.
By RJ RENJITHApr 03, 2014
Related Questions
• Material Consumption Report in BW
By Former MemberJan 31, 2010
• FI_SL
By Former MemberJul 19, 2005
• 0IC_C03 for populate data
\

You might also like