CREATE PEER-TO-PEER

 At Server
o Go to Network/Properties
o Click wireless or LAN network connection
o Click Network Connection Properties
o Click Internet Protocol Version 4 (TCP/IPv4)/Properties
o Set-up IP Address of server
o IP Address: 192.168.1.2
o Subnet Mask: 255.255.255.0
o Preferred DNS: 192.168.1.3
o OK

 At Client
o Do the same you did at the server in the client but change the IP address to:
o 192.168.1.3
o Turn off the firewall of the both PC
o Ping IP to see each PC

CONFIGURE SERVER
ADDS (Active Directory Domain Services)
o Set computer names on server and client
o Add roles/right-click add roles
o Next
o Click ADDS
o Add required features (if newly formatted)
o Next
o Next
o Install
o Close
 At Start (search)
o Type dcpromo to locate the file
o Click dcpromo you will see welcome words
o Next
o Next

 Click domain forest

o Next
o Domain Name
o Type RESPSCI.gov.ph
o Next

 Forest functional level

o Change to windows server 2008 r2
o Next
o Next
o Yes
o Next

 Password during the OS Installation of the Windows Server

o Ex: www.RESPSCI.gov.ph
o Next

1
 o Next
o Click reboot
o Close window pop-up
o Server Manager automatically comes in

 Add roles
o Next

 Click Dynamic Host Configuration Protocol (DHCP) Server

 File Services
 Print and Document Services
o Next
o Next
o Next

 Change DNS at Network Server (verify at IP address properties

o Ex: 192.168.1.2
o Click validate (wait until you see valid)
o Next
o Next

 Click Add or Edit DHCP Scopes

o Click Add
o Scope Name: RESPSCI
o Starting IP Address: 192.168.1.5 (Set at higher octate number of your last IP
address (.2 & .3)
o Ending IP Adress: 192.168.1.15
o OK
o Next

 Click Disable DHCPv6

o Next
o Next
o Next
o Next
o Next
o Install
o Yes
o Close

 Click Windows Key + Pause Break or Start Button/Computer/Properties

o Change settings (computer member of domain)
o Name: client
o Click Domain = deped.gov.ph
o OK
o Log-in Administrator
o Admin1974
o Restart
o Press Ctrl + Alt + Del
o Log-in without password

2
CREATE USER AT SERVER
 Go to Server Manager
o Roles
o +ADDS
o +ADS as Computer
o +RESPSCI.gov.ph
o Right click/new/click organizational unit
o Type RESPSCIOU
o OK
o Right click RESPSCIOU/new/user
o Fill-up at user 1 (info)
o Next
o Click Password never expires
o Set password: Admin1974
o Confirm password
o Next
o Finish (won't finish if password does not meet the requirements (alphanumeric
o +symbols+number)
o Close all

FILE SHARING
o Start button/Computer/enter drive D:\ Create folder
o Name: RESPSCidata
o Right click RESPSC/data/properties/sharing/share
o At file sharing-everyone/add
o At Everyone-change to Read/write
o Share
o Done
o At RESPSCidata properties
o Highlights networks patch
o Copy server (computer name)
o Close all

GROUP POLICY
 Start button/Administrative tools/click group policy management
 Forest
o +forest: www.RESPSCI.gov.ph
o +domains
o +www.RESPSCI.gov.ph
o +RESPSCI (organizational unit)
o Right click
o Create GPO in this domain and link
o Create new (no symbols)
o Ex: RESPSCIGPO
o Ok
o Locate at +RESPSCI
o RESPSCIGPO (right click/edit to redirect folder for the file sharing)
o GMP editor
o Go to (-) user configuration
o +policies
o +windows settings
o +folder redirection

3
 o Desktop properties

 Desktop-right click properties

o Settings: Basic-Redirect everyone folder to the same location
o Paste the network path (computer name of server copied lately) at root path
o Apply
o Yes
o OK

AT CLIENT:
o Start button/log off/switch user/other user/type user1
o Enter username: Client
o Password: Admin1974
o Create folder to network to server

AT SERVER
o Go to my computer/locate folder at RESPSC/data2
o Client/desktop/security permission dialog box/ click continue
o Click security tab
o Desktop properties
o Continue
o Click administrator
o Apply
o OK
o OK
o Close desktop property
o Click desktop/open/continue (must show now folder from client on the server
monitor)
o Add folder at server (this must show to the client desktop or document)

REMOTE ACCESS
o Server Manager
o +Roles
o +DHCP Server
o +Server domain: www.RESPSCI.gov.ph (you can delete if old IP is given)
o +IPv4/New scope/address leases (this time the access point will give wifi IP. Reset
10 if no new IP given for 30sec)

o New Scope wizard

o Name: RESPSCI Scope/next
o IP Address Start: 192.168.1.5
o IP Address End: 192.168.1.15
o Next
o Next
o Next
o Next
o Next
o Next
o Activate Scope now
o Next
o Finish

4
  At server Manager
o IPv4
o +scope (192.168.1.0)
o +Address leases
o Note: if no IP is given-reset access point
o Once IP is given (192.168.1.5)
 At client-access the IP address of access point of server (Using internet explorer type IP
o Address of new access point)
o Next
o Next
o Next
o Change wireless network name to your name and provide password (12345678)
o Save
o OK
o Add
o Save
o Ok

REMOTE DESKTOP
 In your laptop connect wireless "Wi-Fi" locate your name and provide security key
o At start button-search "remote desktop connect
o Type IP add of server or o Enter credential as Administrator.
o Password: Admin1974
o OK
o Yes
 At Server Manager
o If remote desktop is disabled, configure remote desktop
o System properties
o Click Allow connection only for (last button)
o Apply
o Ok

 In your Laptop
o Windows Security
o User name: Administrator
o Password: Admin1974
o Enter
o Yes
o Close

DEPLOY PRINTER
 At Server Manger
o +Roles
o +Print and Documents Services
o +Print Management
o +Custom Filters
o +All Printers (locate your printer) and right click
o Deploy with group policy
o Browse
o Locate Domain: www.RESPSC.gov.ph
o OK
o Browse for GPO

5
 o OK
o Deploy with group policy
o Check the 2 boxes
o Add
o Apply
o OK
o OK
o Check "deployment printer" below server manager
o Share printer/set default printer

AT CLIENT
o Check the deployed printer
o At network icon
o Type: server (name of server)
o Double click printer on server
o Create file or document

HOW TO DELETE ROLES?

Warning: be sure to set back the client to "workgroup" to avoid problem in the future.
 At start button: type dcpromo/click
 Next
 Ok
 Check delete the domain
 Next
 Next
 Delete all application
 Next
 Admin password
o Admin1974
o Next
o Next
o Check reboot on completion
o Reboot

AT SERVER
 Server Manger
o +Roles
o +file services
o +Share and storage
o Click RESPSC/data2
o Stop sharing at the side
o Yes
o Right click server manager
o +Roles/right click
o Remove all roles
o Next
o Uncheck all server roles
o Next
o Delete Printer
o Remove
o Close now and Restart