Scribd
Upload
26 views6 pages

Group 4

The document contains inspection reports for several parts used in infant incubators. It records dimension measurements for the parts and checks that they meet specifications. Final judgments are not provided and no non-conforming parts are noted. Dimension results and appearance checks are presented for the power code hook, rear panel, power lamp guide, illuminance sensor guide, base cap, and alarm lamp.

Uploaded by

Hilario Alinabon
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
26 views6 pages

Group 4

The document contains inspection reports for several parts used in infant incubators. It records dimension measurements for the parts and checks that they meet specifications. Final judgments are not provided and no non-conforming parts are noted. Dimension results and appearance checks are presented for the power code hook, rear panel, power lamp guide, illuminance sensor guide, base cap, and alarm lamp.

Uploaded by

Hilario Alinabon
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 6

Delivery Inspection Report for Infant Incubator Parts

Part code 0X210001


Part name PWR Code Hook
Order No.
Order quantity
Inspection date
Company name
Inspector Name
Checked by
Approved by
Target New part, Recovery part for noncompliant, 4M changed part, Change notice
Inspection item Appearance check, dimension
Inspection Result
Dimension Result
Measuring Equipment: Caliper
Standard Dimension:
A = 55.5 ± 0.2
B = 40.5 ± 0.2 Illustration:

B = 40.5 ± 0.2

n=3 A B
1
2 2
0.
3
±

Ave.
5
5.
5
Max. =
A
Min.
Stdev.

Product Appearance Inspection Result Packaging Inspection Result


n=3 Result n=3 Result
1 1
2 2
3 3

Final Judgment: ______________

Remarks

ACI-QA-F-441-01 Effectivity date: January 28, 2013


Delivery Inspection Report for Infant Incubator Parts
Part code 0C6511700
Part name Rear Panel
Order No.
Order quantity
Inspection date
Company name
Inspector Name
Checked by
Approved by
Target New part, Recovery part for noncompliant, 4M changed part, Change notice
Inspection item Appearance check, dimension
Inspection Result
Dimension Result
Measuring Equipment: Caliper
Standard Dimension:
A = 244.9 ± 0.4
B = 162.0 + 0.2 / - 0.7 Illustration:
A = 244.9 ± 0.4

n=3 A B
1 7

2
0.
-
/
3
2
0.

Ave.
+
2
6
Max.
1
=
B
Min.
Stdev.

Product Appearance Inspection Result Packaging Inspection Result


n=3 Result n=3 Result
1 1
2 2
3 3

Final Judgment: ______________

Remarks:

ACI-QA-F-441-01 Effectivity date: January 28, 2013


Delivery Inspection Report for Infant Incubator Parts
Part code C6511770
Part name PWR Lamp Guide
Order No.
Order quantity
Inspection date
Company name
Inspector Name
Checked by
Approved by
Target New part, Recovery part for noncompliant, 4M changed part, Change notice
Inspection item Appearance check, dimension
Inspection Result
Dimension Result
Measuring Equipment: Caliper
Standard Dimension:
A = 11.0 ± 0.1
B = 9.5 ± 0.2 Illustration:

B = 9.5 ± 0.2
n=3 A B
1
2
1
3 0.

Ave.
±

.0
11
Max. A
=

Min.
Stdev.

Product Appearance Inspection Result Packaging Inspection Result


n=3 Result n=3 Result
1 1
2 2
3 3

Final Judgment: ______________

Remarks:

ACI-QA-F-441-01 Effectivity date: January 28, 2013


Delivery Inspection Report for Infant Incubator Parts
Part code C6511830
Part name Illuminance Sensor Guide
Order No.
Order quantity
Inspection date
Company name
Inspector Name
Checked by
Approved by
Target New part, Recovery part for noncompliant, 4M changed part, Change notice
Inspection item Appearance check, dimension
Inspection Result
Dimension Result
Measuring Equipment: Caliper
Standard Dimension:
A = 11.0 ± 0.1
B = 9.5 ± 0.2 Illustration:

B = 9.5 ± 0.2
n=3 A B
1
2 1
0.

3
±

0
Ave. 1.
1
Max.
=
A

Min.
Stdev.

Product Appearance Inspection Result Packaging Inspection Result


n=3 Result n=3 Result
1 1
2 2
3 3

Final Judgment: ______________

Remarks:

ACI-QA-F-441-01 Effectivity date: January 28, 2013


Delivery Inspection Report for Infant Incubator Parts
Part code C6512201
Part name Base Cap
Order No.
Order quantity
Inspection date
Company name
Inspector Name
Checked by
Approved by
Target New part, Recovery part for noncompliant, 4M changed part, Change notice
Inspection item Appearance check, dimension
Inspection Result
Dimension Result
Measuring Equipment: Caliper
Standard Dimension:
A = 76.6 + 0 / - 0.2
B = 21.6 ± 0.1 Illustration:

n=3 A B
A = 76.6
1
2
3
Ave.
Max.
B = 21.6 ± 0.1
Min.
Stdev.

Product Appearance Inspection Result Packaging Inspection Result


n=3 Result n=3 Result
1 1
2 2
3 3

Final Judgment: ______________

Remarks:

ACI-QA-F-441-01 Effectivity date: January 28, 2013


Delivery Inspection Report for Infant Incubator Parts
Part code C6511710
Part name Alarm Lamp
Order No.
Order quantity
Inspection date
Company name
Inspector Name
Checked by
Approved by
Target New part, Recovery part for noncompliant, 4M changed part, Change notice
Inspection item Appearance check, dimension
Inspection Result
Dimension Result
Measuring Equipment: Caliper
Standard Dimension:
A = 100.0 + 0 / - 0.2
B = 11.1 ± 0.2
Illustration:
n=3 A B
1
2
3 A = 100.0 + 0 /- 0.2

Ave.
Max.
0.2

±
Min.
B = 11.1

Stdev.

Product Appearance Inspection Result Packaging Inspection Result


n=3 Result n=3 Result
1 1
2 2
3 3

Final Judgment: ______________

Remarks:

ACI-QA-F-441-01 Effectivity date: January 28, 2013

You might also like