Scribd
Upload
44 views11 pages

Group 3

This document contains inspection reports for several infant incubator parts. It records measurements of dimensions and appearance checks for parts like a treatment window lock shaft, wall catches for the left and right sides, a door shaft holder, reinforcement stick, innerwall shaft, and hole plug. The dimensions of each part are measured and compared to the standard specifications to check for compliance.

Uploaded by

Hilario Alinabon
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
44 views11 pages

Group 3

This document contains inspection reports for several infant incubator parts. It records measurements of dimensions and appearance checks for parts like a treatment window lock shaft, wall catches for the left and right sides, a door shaft holder, reinforcement stick, innerwall shaft, and hole plug. The dimensions of each part are measured and compared to the standard specifications to check for compliance.

Uploaded by

Hilario Alinabon
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 11

Delivery Inspection Report for Infant Incubator Parts

Part code 0C121331


Part name Treatment Window Lock Shaft
Order No.
Order quantity
Inspection date
Company name
Inspector Name
Checked by
Approved by
Target New part, Recovery part for noncompliant, 4M changed part, Change notice
Inspection item Appearance check, dimension
Inspection Result
Dimension Result
Measuring Equipment: Caliper
Standard Dimension:
A = 18.0 ± 0.2
B = 6.5 ± 0.2
Illustration:
n=3 A B A = 18.0 ± 0.2

1
2
3
Ave.
B = 6.5 ± 0.2
Max.
Min.
Stdev.

Product Appearance Inspection Result Packaging Inspection Result


n=3 Result n=3 Result
1 1
2 2
3 3

Final Judgment: ______________

Remarks

ACI-QA-F-441-01 Effectivity date: January 28, 2013


Delivery Inspection Report for Infant Incubator Parts
Part code 0C501451
Part name Wall Catch ( R)
Order No.
Order quantity
Inspection date
Company name
Inspector Name
Checked by
Approved by
Target New part, Recovery part for noncompliant, 4M changed part, Change notice
Inspection item Appearance check, dimension
Inspection Result
Dimension Result
Measuring Equipment: Caliper
Standard Dimension:
A = 25.0 ± 0.2
B = 18.0 ± 0.2 Illustration:

n=3 A B B = 18.0 ± 0.2

1
2
3
Ave.
Max.
A = 25.0 ± 0.2
Min.
Stdev.

Product Appearance Inspection Result Packaging Inspection Result


n=3 Result n=3 Result
1 1
2 2
3 3

Final Judgment: ______________

Remarks:

ACI-QA-F-441-01 Effectivity date: January 28, 2013


Delivery Inspection Report for Infant Incubator Parts
Part code 0C501361
Part name Wall Catch (L)
Order No.
Order quantity
Inspection date
Company name
Inspector Name
Checked by
Approved by
Target New part, Recovery part for noncompliant, 4M changed part, Change notice
Inspection item Appearance check, dimension
Inspection Result
Dimension Result
Measuring Equipment: Caliper
Standard Dimension:
A = 25.0 ± 0.2
B = 18.0 ± 0.2 Illustration:

n=3 A B B = 18.0 ± 0.2

1
2
3
Ave.
Max.
A = 25.0 ± 0.2
Min.
Stdev.

Product Appearance Inspection Result Packaging Inspection Result


n=3 Result n=3 Result
1 1
2 2
3 3

Final Judgment: ______________

Remarks:

ACI-QA-F-441-01 Effectivity date: January 28, 2013


Delivery Inspection Report for Infant Incubator Parts
Part code 0C501841
Part name Door Shaft Holder
Order No.
Order quantity
Inspection date
Company name
Inspector Name
Checked by
Approved by
Target New part, Recovery part for noncompliant, 4M changed part, Change notice
Inspection item Appearance check, dimension
Inspection Result
Dimension Result
Measuring Equipment: Caliper
Standard Dimension:
A = 7.9 + 0 / - 0.1
B = 5.0 ± 0.1 Illustration:

n=3 A B
1
1 0.
-

2
/
0
+
3 9
7.

Ave.
=
A

Max.
Min.
Stdev.
B = 5.0 ± 0.1

Product Appearance Inspection Result Packaging Inspection Result


n=3 Result n=3 Result
1 1
2 2
3 3

Final Judgment: ______________

Remarks:

ACI-QA-F-441-01 Effectivity date: January 28, 2013


Delivery Inspection Report for Infant Incubator Parts
Part code 0C503081
Part name Reinforcement Stick L
Order No.
Order quantity
Inspection date
Company name
Inspector Name
Checked by
Approved by
Target New part, Recovery part for noncompliant, 4M changed part, Change notice
Inspection item Appearance check, dimension
Inspection Result
Dimension Result
Measuring Equipment: Caliper
Standard Dimension:
A = 17.8 ± 0.2
B = 5.5 ± 0.1 Illustration:

n=3 A B
1
2
0.2
±

8
3 17.
=

Ave.
A

Max.
Min.
Stdev.
B = 5.5 ± 0.1

Product Appearance Inspection Result Packaging Inspection Result


n=3 Result n=3 Result
1 1
2 2
3 3

Final Judgment: ______________

Remarks:

ACI-QA-F-441-01 Effectivity date: January 28, 2013


Delivery Inspection Report for Infant Incubator Parts
Part code 0C505132
Part name Innerwall Shaft
Order No.
Order quantity
Inspection date
Company name
Inspector Name
Checked by
Approved by
Target New part, Recovery part for noncompliant, 4M changed part, Change notice
Inspection item Appearance check, dimension
Inspection Result
Dimension Result
Measuring Equipment: Caliper
Standard Dimension:
A = 24.5 ± 0.1
B = 10.0 ± 0.2
Cavity 1 Cavity 2 Illustration:
n=3
A B A B
B = 24.5 ± 0.1
1
2 2
0.
3
±

Ave.
10
=
A
Max.
Min.
Stdev.

Product Appearance Inspection Result Packaging Inspection Result


n=3 Result n=3 Result
1 1
2 2
3 3

Final Judgment: ______________

Remarks:

ACI-QA-F-441-01 Effectivity date: January 28, 2013


Delivery Inspection Report for Infant Incubator Parts
Part code 0C551460
Part name Hole Plug
Order No.
Order quantity
Inspection date
Company name
Inspector Name
Checked by
Approved by
Target New part, Recovery part for noncompliant, 4M changed part, Change notice
Inspection item Appearance check, dimension
Inspection Result
Dimension Result
Measuring Equipment: Caliper
Standard Dimension:
A = 28.0 ± 0.2
B = 14.0 ± 0.2
Cavity 1 Cavity 2 Illustration:
n=3
A B A B A = 28.0 ± 0.2
1
2
3 2
0.

Ave.
±

.0
Max. 14
=
Min.
B

Stdev.

Product Appearance Inspection Result Packaging Inspection Result


n=3 Result n=3 Result
1 1
2 2
3 3

Final Judgment: ______________

Remarks:

ACI-QA-F-441-01 Effectivity date: January 28, 2013


Delivery Inspection Report for Infant Incubator Parts
Part code 0C551641
Part name Inner Wall Shaft Stopper
Order No.
Order quantity
Inspection date
Company name
Inspector Name
Checked by
Approved by
Target New part, Recovery part for noncompliant, 4M changed part, Change notice
Inspection item Appearance check, dimension
Inspection Result
Dimension Result
Measuring Equipment: Caliper
Standard Dimension:
A = 21.0 ± 0.2
B = 20.0 ± 0.2 Illustration:

n=3 A B
1
2 0.2

3
±

0
21.
Ave.
A=
0.2
±
Max. 20.0
B=
Min.
Stdev.

Product Appearance Inspection Result Packaging Inspection Result


n=3 Result n=3 Result
1 1
2 2
3 3

Final Judgment: ______________

Remarks:

ACI-QA-F-441-01 Effectivity date: January 28, 2013


Delivery Inspection Report for Infant Incubator Parts
Part code C6513250
Part name Bubble Tube Holder
Order No.
Order quantity
Inspection date
Company name
Inspector Name
Checked by
Approved by
Target New part, Recovery part for noncompliant, 4M changed part, Change notice
Inspection item Appearance check, dimension
Inspection Result
Dimension Result
Measuring Equipment: Caliper
Standard Dimension:
A = 36.5 ± 0.3
B = 11.0 + 0 / - 0.1 Illustration:

A = 36.5 ± 0.3
n=3 A B
1
1 0.
-
2
/
0
+
3 0
1.
Ave.
1
=
B
Max.
Min.
Stdev.

Product Appearance Inspection Result Packaging Inspection Result


n=3 Result n=3 Result
1 1
2 2
3 3

Final Judgment: ______________

Remarks:

ACI-QA-F-441-01 Effectivity date: January 28, 2013


Delivery Inspection Report for Infant Incubator Parts
Part code C6513270
Part name LED Front Panel
Order No.
Order quantity
Inspection date
Company name
Inspector Name
Checked by
Approved by
Target New part, Recovery part for noncompliant, 4M changed part, Change notice
Inspection item Appearance check, dimension
Inspection Result
Dimension Result
Measuring Equipment: Caliper
Standard Dimension:
A = 178.0 ± 0.3
B = 110.0 ± 0.3 Illustration:
A = 178.0 ± 0.3

n=3 A B
1
2 3
3
0.
±

0
Ave. 0.
11
Max.
=
B

Min.
Stdev.

Product Appearance Inspection Result Packaging Inspection Result


n=3 Result n=3 Result
1 1
2 2
3 3

Final Judgment: ______________

Remarks:

ACI-QA-F-441-01 Effectivity date: January 28, 2013


Delivery Inspection Report for Infant Incubator Parts
Part code
Part name Block Seal E
Order No.
Order quantity
Inspection date
Company name
Inspector Name
Checked by
Approved by
Target New part, Recovery part for noncompliant, 4M changed part, Change notice
Inspection item Appearance check, dimension
Inspection Result
Dimension Result
Measuring Equipment: Caliper
Standard Dimension:
A = 256.0 ± 0.5
B = 159.0 ± 0.5 Illustration:
B = 159.0 ± 0.5
A = 256.0 ± 0.5

n=3 Cavity 1 Cavity 2


1 A B A B
2
3
Ave.
Max.
Min.
Stdev.

Product Appearance Inspection Result Packaging Inspection Result


n=3 Result n=3 Result
1 1
2 2
3 3

Final Judgment: ______________

Remarks:

ACI-QA-F-441-01 Effectivity date: January 28, 2013

You might also like