Scribd
Upload
33 views20 pages

Group 2

This document contains inspection reports for multiple parts used in infant incubators. Dimensions and appearances of each part were measured and evaluated against standards. Test results for dimensions and appearances are shown for each part, along with a final judgment and any remarks.

Uploaded by

Hilario Alinabon
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
33 views20 pages

Group 2

This document contains inspection reports for multiple parts used in infant incubators. Dimensions and appearances of each part were measured and evaluated against standards. Test results for dimensions and appearances are shown for each part, along with a final judgment and any remarks.

Uploaded by

Hilario Alinabon
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 20

Delivery Inspection Report for Infant Incubator Parts

Part code C6511090


Part name Care Window Base
Order No.
Order quantity
Inspection date
Company name
Inspector Name
Checked by
Approved by
Target New part, Recovery part for noncompliant, 4M changed part, Change notice
Inspection item Appearance check, dimension
Inspection Result
Dimension Result
Measuring Equipment: Caliper
Standard Dimension:
A = 273.9 ± 0.5
B = 53.0 ± 0.3 Illustration:

n=3 A B
1
2
3
Ave.
Max.
Min.
Stdev. A B

Product Appearance Inspection Result Packaging Inspection Result


n=3 Result n=3 Result
1 1
2 2
3 3

Final Judgment: ______________

Remarks

ACI-QA-F-441-01 Effectivity date: January 28, 2013


Delivery Inspection Report for Infant Incubator Parts
Part code C6511100
Part name Release Lever
Order No.
Order quantity
Inspection date
Company name
Inspector Name
Checked by
Approved by
Target New part, Recovery part for noncompliant, 4M changed part, Change notice
Inspection item Appearance check, dimension
Inspection Result
Dimension Result
Measuring Equipment: Caliper
Standard Dimension:
A = 47.5 ± 0.3
B = 3.0 ± 0.2 Illustration:
B = 3.0 ± 0.2

n=3 A B
1
2
3
Ave.
Max.
Min.
Stdev.
A = 47.5 ± 0.3

Product Appearance Inspection Result Packaging Inspection Result


n=3 Result n=3 Result
1 1
2 2
3 3

Final Judgment: ______________

Remarks:

ACI-QA-F-441-01 Effectivity date: January 28, 2013


Delivery Inspection Report for Infant Incubator Parts
Part code C6511120
Part name Latch Base
Order No.
Order quantity
Inspection date
Company name
Inspector Name
Checked by
Approved by
Target New part, Recovery part for noncompliant, 4M changed part, Change notice
Inspection item Appearance check, dimension
Inspection Result
Dimension Result
Measuring Equipment: Caliper
Standard Dimension:
A = 31.8 ± 0.1
B = 4.5 ± 0.1 Illustration:

n=3 A B
1
2
3
Ave.
Max.
Min.
Stdev. A = 31.8 ± 0.1 B = Ø 4.5 ± 0.1

Product Appearance Inspection Result Packaging Inspection Result


n=3 Result n=3 Result
1 1
2 2
3 3

Final Judgment: ______________

Remarks:

ACI-QA-F-441-01 Effectivity date: January 28, 2013


Delivery Inspection Report for Infant Incubator Parts
Part code C6511140
Part name Hinge Cover
Order No.
Order quantity
Inspection date
Company name
Inspector Name
Checked by
Approved by
Target New part, Recovery part for noncompliant, 4M changed part, Change notice
Inspection item Appearance check, dimension
Inspection Result
Dimension Result
Measuring Equipment: Caliper
Standard Dimension:
A = 57.4 ± 0.3
B = 56.3 + 0.2/-0 Illustration:

A = 57.4 ± 0.3
n=3 A B
1
2
3
Ave.
Max.
Min. B = 56.3 + 0.2/-0

Stdev.

Product Appearance Inspection Result Packaging Inspection Result


n=3 Result n=3 Result
1 1
2 2
3 3

Final Judgment: ______________

Remarks:

ACI-QA-F-441-01 Effectivity date: January 28, 2013


Delivery Inspection Report for Infant Incubator Parts
Part code C6511150
Part name Rotation Damper
Order No.
Order quantity
Inspection date
Company name
Inspector Name
Checked by
Approved by
Target New part, Recovery part for noncompliant, 4M changed part, Change notice
Inspection item Appearance check, dimension
Inspection Result
Dimension Result
Measuring Equipment: Caliper
Standard Dimension:
A = 56.4 ± 0.5
B = 9.5 ± 0.2 Illustration:

A = 56.4 ± 0.5

n=3 A B
1
2
3
Ave.
Max.
Min.
Stdev. B = 9.5 ± 0.2

Product Appearance Inspection Result Packaging Inspection Result


n=3 Result n=3 Result
1 1
2 2
3 3

Final Judgment: ______________

Remarks:

ACI-QA-F-441-01 Effectivity date: January 28, 2013


Delivery Inspection Report for Infant Incubator Parts
Part code C6511360
Part name Care Window Spacer Right
Order No.
Order quantity
Inspection date
Company name
Inspector Name
Checked by
Approved by
Target New part, Recovery part for noncompliant, 4M changed part, Change notice
Inspection item Appearance check, dimension
Inspection Result
Dimension Result
Measuring Equipment: Caliper
Standard Dimension:
A = 20.5 ± 0.1
B = 4.025 + 0.05 / -0
Cavity 1 Cavity 2 Illustration:
n=3
A B A B A = 20.5 ± 0.1
B =Ø 4.025 + 0.05 / -
0
1
2
3
Ave.
Max.
Min.
Stdev.

Product Appearance Inspection Result Packaging Inspection Result


n=3 Result n=3 Result
1 1
2 2
3 3

Final Judgment: ______________

Remarks:

ACI-QA-F-441-01 Effectivity date: January 28, 2013


Delivery Inspection Report for Infant Incubator Parts
Part code C6511350
Part name Care Window Spacer Left
Order No.
Order quantity
Inspection date
Company name
Inspector Name
Checked by
Approved by
Target New part, Recovery part for noncompliant, 4M changed part, Change notice
Inspection item Appearance check, dimension
Inspection Result
Dimension Result
Measuring Equipment: Caliper
Standard Dimension:
A = 20.5 ± 0.1
B = 4.025 + 0.05 / -0
Cavity 1 Cavity 2 Illustration:
n=3
A B A B A = 20.5 ± 0.1
B =Ø 4.025 + 0.05 / -
0
1
2
3
Ave.
Max.
Min.
Stdev.

Product Appearance Inspection Result Packaging Inspection Result


n=3 Result n=3 Result
1 1
2 2
3 3

Final Judgment: ______________

Remarks:

ACI-QA-F-441-01 Effectivity date: January 28, 2013


Delivery Inspection Report for Infant Incubator Parts
Part code C6511460
Part name Sensor Attachment Plate
Order No.
Order quantity
Inspection date
Company name
Inspector Name
Checked by
Approved by
Target New part, Recovery part for noncompliant, 4M changed part, Change notice
Inspection item Appearance check, dimension
Inspection Result
Dimension Result
Measuring Equipment: Caliper
Standard Dimension:
A = 55.0 ± 0.3
B = 17.6 ± 0.2 Illustration:
Cavity No. Cavity 1 Cavity 2
0.3
±
0
n=3 A B A B 55.
=
1
A
2
2 0.

3
±
.6
17
Ave. B
=

Max.
Min.
Stdev.

Product Appearance Inspection Result Packaging Inspection Result


n=3 Result n=3 Result
1 1
2 2
3 3

Final Judgment: ______________

Remarks:

ACI-QA-F-441-01 Effectivity date: January 28, 2013


Delivery Inspection Report for Infant Incubator Parts
Part code C6511570
Part name Sensor Module Case A
Order No.
Order quantity
Inspection date
Company name
Inspector Name
Checked by
Approved by
Target New part, Recovery part for noncompliant, 4M changed part, Change notice
Inspection item Appearance check, dimension
Inspection Result
Dimension Result
Measuring Equipment: Caliper
Standard Dimension:
A = 96.0 ± 0.3
B = 82.0 ± 0.3 Illustration:

n=3 A B
1
2
3
0.

3
±

.0
B = 82.0 ± 0.3
Ave.
96
=
A
Max.
Min.
Stdev.

Product Appearance Inspection Result Packaging Inspection Result


n=3 Result n=3 Result
1 1
2 2
3 3

Final Judgment: ______________

Remarks:

ACI-QA-F-441-01 Effectivity date: January 28, 2013


Delivery Inspection Report for Infant Incubator Parts
Part code C6511580
Part name Sensor Module Case B
Order No.
Order quantity
Inspection date
Company name
Inspector Name
Checked by
Approved by
Target New part, Recovery part for noncompliant, 4M changed part, Change notice
Inspection item Appearance check, dimension
Inspection Result
Dimension Result
Measuring Equipment: Caliper
Standard Dimension:
A = 96.0 ± 0.3
B = 82.0 + 0 / -0.6 Illustration:
B = 82.0 + 0 / -0.6

n=3 A B
1
2
3
3
0.
±

Ave. 0
6.
Max.
9
=
A
Min.
Stdev.

Product Appearance Inspection Result Packaging Inspection Result


n=3 Result n=3 Result
1 1
2 2
3 3

Final Judgment: ______________

Remarks:

ACI-QA-F-441-01 Effectivity date: January 28, 2013


Delivery Inspection Report for Infant Incubator Parts
Part code C6512040
Part name Hoisting Actuator Cover
Order No.
Order quantity
Inspection date
Company name
Inspector Name
Checked by
Approved by
Target New part, Recovery part for noncompliant, 4M changed part, Change notice part
Inspection item Appearance check, dimension
Inspection Result
Dimension Result
Measuring Equipment: Caliper
Standard Dimension:
A = 256.0 ± 0.5
B = 159.0 ± 0.5 Illustration:
B = 159.0 ± 0.5
C = 80.0 ± 0.3 A = 256.0 ± 0.5

n=3 A B C
1
2

0.3
±
3 C = 80.0
Ave.
Max.
Min.
Stdev.

Product Appearance Inspection Result Packaging Inspection Result


n=3 Result n=3 Result
1 1
2 2
3 3

Final Judgment: ______________

Remarks:

ACI-QA-F-441-01 Effectivity date: January 28, 2013


Delivery Inspection Report for Infant Incubator Parts
Part code C6512701
Part name Canopy Packing Bracket
Order No.
Order quantity
Inspection date
Company name
Inspector Name
Checked by
Approved by
Target New part, Recovery part for noncompliant, 4M changed part, Change notice
Inspection item Appearance check, dimension
Inspection Result
Dimension Result
Measuring Equipment: Caliper
Standard Dimension:
A = 400.0 ± 0.8
B = 10.7 ± 0.2 Illustration:

A = 400 ± 0.8
n=3 A B
1
2
3
Ave.
Max. B = 10.7 ± 0.2

Min.
Stdev.

Product Appearance Inspection Result Packaging Inspection Result


n=3 Result n=3 Result
1 1
2 2
3 3

Final Judgment: ______________

Remarks:

ACI-QA-F-441-01 Effectivity date: January 28, 2013


Delivery Inspection Report for Infant Incubator Parts
Part code C6513280
Part name Led Rear Panel
Order No.
Order quantity
Inspection date
Company name
Inspector Name
Checked by
Approved by
Target New part, Recovery part for noncompliant, 4M changed part, Change notice
Inspection item Appearance check, dimension
Inspection Result
Dimension Result
Measuring Equipment: Caliper
Standard Dimension:
A = 178 ± 0.3
B = 107.4 + 0 / - 0.4 Illustration:

A = 178 ± 0.3

n=3 A B
1
2 4
0.
3 -
/
Ave.
0
+
7
Max. 0.
1
Min.
=
B

Stdev.

Product Appearance Inspection Result Packaging Inspection Result


n=3 Result n=3 Result
1 1
2 2
3 3

Final Judgment: ______________

Remarks:

ACI-QA-F-441-01 Effectivity date: January 28, 2013


Delivery Inspection Report for Infant Incubator Parts
Part code C6513300
Part name Sensor Module Case C
Order No.
Order quantity
Inspection date
Company name
Inspector Name
Checked by
Approved by
Target New part, Recovery part for noncompliant, 4M changed part, Change notice
Inspection item Appearance check, dimension
Inspection Result
Dimension Result
Measuring Equipment: Caliper
Standard Dimension:
A = 96.0 ± 0.3
B = 82.0 ± 0.3 Illustration:
A = 96.0 ± 0.3

n=3 A B
1
2
3
3 0.

Ave.
±

0
2.
Max. 8
=
Min.
B

Stdev.

Product Appearance Inspection Result Packaging Inspection Result


n=3 Result n=3 Result
1 1
2 2
3 3

Final Judgment: ______________

Remarks:

ACI-QA-F-441-01 Effectivity date: January 28, 2013


Delivery Inspection Report for Infant Incubator Parts
Part code C6513310
Part name Sensor Attachment Plate (Right)
Order No.
Order quantity
Inspection date
Company name
Inspector Name
Checked by
Approved by
Target New part, Recovery part for noncompliant, 4M changed part, Change notice
Inspection item Appearance check, dimension
Inspection Result
Dimension Result
Measuring Equipment: Caliper
Standard Dimension:
A = 22.0 + 0 / - 0.1
B = 7.9 ± 0.2
Illustration:
n=3 A B B = 7.9 ± 0.2

1
2 3
0.
3
1
0.
-
Ave. /
0
Max.
+
0
2.
Min. 2
=
Stdev.
A

Product Appearance Inspection Result Packaging Inspection Result


n=3 Result n=3 Result
1 1
2 2
3 3

Final Judgment: ______________

Remarks:

ACI-QA-F-441-01 Effectivity date: January 28, 2013


Delivery Inspection Report for Infant Incubator Parts
Part code C6513320
Part name Sensor Attachment Plate (Left)
Order No.
Order quantity
Inspection date
Company name
Inspector Name
Checked by
Approved by
Target New part, Recovery part for noncompliant, 4M changed part, Change notice
Inspection item Appearance check, dimension
Inspection Result
Dimension Result
Measuring Equipment: Caliper
Standard Dimension:
A = 22.0 + 0 / - 0.1
B = 7.9 ± 0.2 Illustration:

n=3 A B B = 7.9 ± 0.2

1
2 3
0.
3
1
0.
-
Ave. /
0
Max.
+
0
2.
Min. 2
=
Stdev.
A

Product Appearance Inspection Result Packaging Inspection Result


n=3 Result n=3 Result
1 1
2 2
3 3

Final Judgment: ______________

Remarks:

ACI-QA-F-441-01 Effectivity date: January 28, 2013


Delivery Inspection Report for Infant Incubator Parts
Part code C6513330
Part name Lightguide Plate
Order No.
Order quantity
Inspection date
Company name
Inspector Name
Checked by
Approved by
Target New part, Recovery part for noncompliant, 4M changed part, Change notice part
Inspection item Appearance check, dimension
Inspection Result
Dimension Result
Measuring Equipment: Caliper
Standard Dimension:
A = 7.5 + 0 / - 0.1
B = 2.0 ± 0.1 Illustration:
No of Cavity Cavity 1 Cavity 2 Cavity 3 Cavity 4 1
0.
n=3 A B A B A B A B -
/
1
0
+
5
2 7.
=

3
A

Ave.
1
Max.
0.

Min.
±

0
2.
Stdev.
=
B

Product Appearance Inspection Result Packaging Inspection Result


n=3 Result n=3 Result
1 1
2 2
3 3

Final Judgment: ______________

Remarks:

ACI-QA-F-441-01 ectivity date: January 28, 2013


Delivery Inspection Report for Infant Incubator Parts
Part code C6513372
Part name LED Base
Order No.
Order quantity
Inspection date
Company name
Inspector Name
Checked by
Approved by
Target New part, Recovery part for noncompliant, 4M changed part, Change notice
Inspection item Appearance check, dimension
Inspection Result
Dimension Result
Measuring Equipment: Caliper
Standard Dimension:
A = 67.0 + 0.2 / - 0.5
B = 20.8 ± 0.2 Illustration:

2
n=3 A B 0.

1
±

2
0.
2
=
3
A

Ave.
Max. A = 67 + 0.2 / - 0.5

Min.
Stdev.

Product Appearance Inspection Result Packaging Inspection Result


n=3 Result n=3 Result
1 1
2 2
3 3

Final Judgment: ______________

Remarks:

ACI-QA-F-441-01 Effectivity date: January 28, 2013


Delivery Inspection Report for Infant Incubator Parts
Part code C6513400
Part name Fix Lever
Order No.
Order quantity
Inspection date
Company name
Inspector Name
Checked by
Approved by
Target New part, Recovery part for noncompliant, 4M changed part, Change notice
Inspection item Appearance check, dimension
Inspection Result
Dimension Result
Measuring Equipment: Caliper
Standard Dimension:
A = 18.9 ± 0.3
B = 4.0 ± 0.1
Illustration:
A = 18.9 ± 0.3
n=3 A B
1
1 0.

2
±

0
4.
3 =
B
Ave.
Max.
Min.
Stdev.

Product Appearance Inspection Result Packaging Inspection Result


n=3 Result n=3 Result
1 1
2 2
3 3

Final Judgment: ______________

Remarks:

ACI-QA-F-441-01 Effectivity date: January 28, 2013


Delivery Inspection Report for Infant Incubator Parts
Part code C6513450
Part name Nut Cover
Order No.
Order quantity
Inspection date
Company name
Inspector Name
Checked by
Approved by
Target New part, Recovery part for noncompliant, 4M changed part, Change notice
Inspection item Appearance check, dimension
Inspection Result
Dimension Result
Measuring Equipment: Caliper
Standard Dimension:
A = 16.5 ± 0.2
B = 15.0 ± 0.2
Cavity 1 Cavity 2 Illustration:
n=3
A B A B
1 2
0.
2 ±

3
0
5.
1
Ave. =
B

Max.
Min.
Stdev. A = 16.5 ± 0.2

Product Appearance Inspection Result Packaging Inspection Result


n=3 Result n=3 Result
1 1
2 2
3 3

Final Judgment: ______________

Remarks:

ACI-QA-F-441-01 Effectivity date: January 28, 2013

You might also like