Simulation of Part2

Date: Saturday, June 10, 2023

Designer: 2003149
Study name: Static 1
Analysis type: Static

Table of Contents
Description ............................................ 1
Assumptions .......................................... 2
Model Information ................................... 2
Study Properties ..................................... 3
Units ................................................... 3
Material Properties .................................. 4
Description Loads and Fixtures................................... 4
No Data Connector Definitions ............................... 5
Contact Information ................................. 5
Mesh information .................................... 6
Sensor Details ........................................ 7
Resultant Forces ..................................... 7
Beams .................................................. 7
Study Results ......................................... 8
Conclusion ............................................ 9

Analyzed with SOLIDWORKS Simulation Simulation of Part2 1

Assumptions

Model Information

Model name: Part2

Current Configuration: Default
Solid Bodies
Document Name and Document Path/Date
Treated As Volumetric Properties
Reference Modified
Rib1
Mass:2.47836 kg
Volume:0.000313717 m^3
Solid Body Density:7,900 kg/m^3
Weight:24.288 N

Analyzed with SOLIDWORKS Simulation Simulation of Part2 2

Study Properties
Study name Static 1
Analysis type Static
Mesh type Solid Mesh
Thermal Effect: On
Thermal option Include temperature loads
Zero strain temperature 298 Kelvin
Include fluid pressure effects from Off
SOLIDWORKS Flow Simulation
Solver type FFEPlus
Inplane Effect: Off
Soft Spring: Off
Inertial Relief: Off
Incompatible bonding options Automatic
Large displacement Off
Compute free body forces On
Friction Off
Use Adaptive Method: Off
Result folder SOLIDWORKS document
(c:\users\u2003\appdata\local\temp)

Units
Unit system: SI (MKS)
Length/Displacement mm
Temperature Kelvin
Angular velocity Rad/sec
Pressure/Stress N/m^2

Analyzed with SOLIDWORKS Simulation Simulation of Part2 3

Material Properties
Model Reference Properties Components
Name: AISI 1020 SolidBody 1(Rib1)(Part2)
Model type: Linear Elastic Isotropic
Default failure Max von Mises Stress
criterion:
Yield strength: 3.51571e+08 N/m^2
Tensile strength: 4.20507e+08 N/m^2
Elastic modulus: 2e+11 N/m^2
Poisson's ratio: 0.29
Mass density: 7,900 kg/m^3
Shear modulus: 7.7e+10 N/m^2
Thermal expansion 1.5e-05 /Kelvin
coefficient:
Curve Data:N/A

Loads and Fixtures

Fixture name Fixture Image Fixture Details
Entities: 2 face(s)
Type: Fixed Geometry
Fixed-1

Resultant Forces
Components X Y Z Resultant
Reaction force(N) 0.0107808 999.959 0.0813336 999.959
Reaction Moment(N.m) 0 0 0 0

Load name Load Image Load Details

Entities: 1 edge(s), 1 face(s)
Reference: Face< 1 >
Type: Apply force
Force-1 Values: ---, ---, -,500 N

Analyzed with SOLIDWORKS Simulation Simulation of Part2 4

Connector Definitions
No Data

Contact Information
No Data

Analyzed with SOLIDWORKS Simulation Simulation of Part2 5

Mesh information
Mesh type Solid Mesh
Mesher Used: Standard mesh
Automatic Transition: Off
Include Mesh Auto Loops: Off
Jacobian points 4 Points
Element Size 6.79667 mm
Tolerance 0.339833 mm
Mesh Quality Plot High

Mesh information - Details

Total Nodes 12317
Total Elements 7606
Maximum Aspect Ratio 3.967
% of elements with Aspect Ratio < 3 99.7
% of elements with Aspect Ratio > 10 0
% of distorted elements(Jacobian) 0
Time to complete mesh(hh;mm;ss): 00:00:01
Computer name: USER

Analyzed with SOLIDWORKS Simulation Simulation of Part2 6

Sensor Details
No Data

Resultant Forces
Reaction forces
Selection set Units Sum X Sum Y Sum Z Resultant
Entire Model N 0.0107808 999.959 0.0813336 999.959

Reaction Moments
Selection set Units Sum X Sum Y Sum Z Resultant
Entire Model N.m 0 0 0 0

Beams
No Data

Analyzed with SOLIDWORKS Simulation Simulation of Part2 7

Study Results

Name Type Min Max

Stress1 VON: von Mises Stress 1.816e+04 N/m^2 2.083e+07 N/m^2
Node: 9135 Node: 101

Part2-Static 1-Stress-Stress1

Name Type Min Max

Displacement1 URES: Resultant Displacement 0.000e+00 mm 1.650e-02 mm
Node: 53 Node: 290

Part2-Static 1-Displacement-Displacement1

Analyzed with SOLIDWORKS Simulation Simulation of Part2 8

Name Type Min Max
Strain1 ESTRN: Equivalent Strain 6.644e-08 7.112e-05
Element: 2437 Element: 2162

Part2-Static 1-Strain-Strain1

Conclusion

Analyzed with SOLIDWORKS Simulation Simulation of Part2 9