Welcome to Device Device overview Step 1: Get the Device app Step 2: Register the Device Step 3: Connect

Step 1: Get the Device app Step 2: Register the Device Step 3: Connect to your Device Step 4: Connect your Device to Wi-Fi Start using Device

Device gives you voice control and access to your cloud Microphones a. Before you start, make sure that you know the name a. In the menu of the Device app, go to “Settings”, then a. Plug in the Device. The light ring will show a blue a. Go back to the Device app. It will advance to the Get Device’s attention by saying “XXX” (for devices
music plus voice enabled music shopping, weather (SSID) and password of your Wi-Fi network. to “Add New Device”. animation. next step after connecting to the Device. with a serial number ending with A to F) or
forecasts and task management. This includes alarms, Mics on/off button Active button “YYY” (for serial numbers ending with G to Z). The
b. For an iOS or Android phone or tablet, install the Device b. Enter the Device serial number. b. The Device will automatically go to setup mode. The b. You will see a list of Wi-Fi networks the Device can
timers, to-dos, and shopping lists. Using Bluetooth, you Light ring light ring will turn blue when XXX hears you.
app from https://XXXXXX.com/start. For a laptop or blue animation will turn orange. If no orange connect to. Select your Wi-Fi and enter the password
can also stream music from your phone or tablet, or use different phone or tablet, use your browser to go to ttps:// c. Enter your ZIP code to indicate your location. animation appears, press and hold the Active button for this network. Now you can say things like: “XXX, play some music”,
Device as a speakerphone. XXXXXX.com/start on top of the device until the orange animation
Volume ring d. The app will show instructions on how to set up or “XXX, what’s the weather in New York?”
c. Click “Connect”. The Device will connect to your
your Device. appears.
Wi-Fi network. This might take a minute. To adjust the volume, say things like “XXX, turn it up”,
c. When the Device app tells you to connect to the or “XXX, volume down”, or rotate the top ring.
Getting started is easy: d. Click “Exit Wi-Fi Setup”. Your phone, tablet or laptop will
Device, go to the Wi-Fi settings page on your phone,
disconnect from the Device. The orange animation will You can turn the microphones off by pressing the
1. Get the Device App. tablet or laptop.
stop. microphone button.
2. Register the device. d. Select the Wi-Fi network starting with “DIRECT-dp-”. If
e. The Device will establish a connection to the Device
you don’t see it, refresh the list. Enter the password
3. Connect your phone, tablet, or laptop to your service via the Internet. This may take a while. When
“1234567”. Your phone, tablet or laptop is now connected
Device. this is done, you will hear a message. Your Device is
to the Device.
now set up.
4. Connect your Device to your Wi-Fi. Status light

2 3 4 5 6 7

Downloaded from www.Manualslib.com manuals search engine

 More examples of phrases to say Explore the Device app Light ring animations Status light Tips and tricks Legal and Compliance Information
FCC Compliance Statement
“Play Stairway to Heaven.” You can use the Device app to control music, • For optimal performance, the Device should be placed This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

manage to-dos, timers and alarms, act on your in a central location in the room. -This device may not cause harmful interference.
“Play songs by Michael Jackson.” Device starting up -This device must accept any interference received, including interference that may cause undesired operation.
shopping list, manage the device, and more. • If you have problems with Device understanding To maintain compliance with FCC's RF exposure guidelines, the antenna(s) used for this transmitter must be
installed to provide a separation distance of at least 20cm from all persons and must not be co-located or
“Play The Eagles on iHeartRadio.” you, direct your voice towards the device. operating in conjunction with any other antenna or transmitter.
Here are some examples: Status light
Device User Guide
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
“Play KCSM on TuneIn.” Device active 15 of the FCC Rules. These limits are designed to provide reasonable protection. This equipment generates, uses
• Set a timer under Timers & Alarms. and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
“What is playing?” cause interference to radio communications. However, there is no guarantee that interference will not occur in a
• Ask for the weather and then look at the Device Power cable connector particular installation. If this equipment does cause harmful interference to radio or television reception, which

“Find new songs by Adele.” app’s homepage to see the extended forecast. Adjusting volume can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
-Reorient or relocate the receiving antenna.
“Will it rain tomorrow?” -Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
“Set a timer for ten minutes.” Safety and Compliance Guide Microphone off -Consult the dealer or an experienced radio/TV technician for help.
Changes or modification not expressly approved by the party responsible for compliance could void the user’s
“Set my alarm to seven in the morning.” Device on and connected authority to operate the equipment.
Go to companion app XXX to access this info. The Devices meet the FCC Radio Frequency Emission Guidelines and are certified with the FCC as the FCC

“Add eggs to my shopping list.” On phone call White blinking: Powering on

ID number found on the back of the Device.
This device is restricted to indoor use when operating in the 5.15 to 5.25 GHz frequency band.

“Add visit grandma to my to-do list.” Orange solid: Not connected to Wi-Fi Orange Information Regarding Exposure to Radio Frequency Energy

Your Device is designed and manufactured not to exceed the emission limits for exposure to RF energy set by
“Pair my phone.” blinking: Not connected to Device service the Federal Communications Commission of the United States (FCC). Information on your Device is on file with
the FCC and can be found under the Display Grant section of http://transition.fcc.gov/oet/ea/ after searching
8 9 10 11 12 on the FCC ID for your Device, which can be found on the back of the Device.
13

Downloaded from www.Manualslib.com manuals search engine