Scribd
Upload
38 views

Encoders

Encoders are combinational circuits that convert binary information from 2N input lines into an N-bit output code. At a time, only one input line is activated, and the output code represents the active input line. There are different types of encoders including 4-to-2 line encoders, 8-to-3 line encoders, decimal-to-BCD encoders, and 4-to-2 line priority encoders. Encoders are used to convert numbers between binary and decimal representations and are important components in digital systems.

Uploaded by

suresh mariappan
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
38 views

Encoders

Encoders are combinational circuits that convert binary information from 2N input lines into an N-bit output code. At a time, only one input line is activated, and the output code represents the active input line. There are different types of encoders including 4-to-2 line encoders, 8-to-3 line encoders, decimal-to-BCD encoders, and 4-to-2 line priority encoders. Encoders are used to convert numbers between binary and decimal representations and are important components in digital systems.

Uploaded by

suresh mariappan
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 8

Encoders

The combinational circuits that change the binary information into N output
lines are known as Encoders. The binary information is passed in the form of
2N input lines. The output lines define the N-bit code for the binary
information. In simple words, the Encoder performs the reverse operation of
the Decoder. At a time, only one input line is activated for simplicity. The
produced N-bit output code is equivalent to the binary information.

There are various types of encoders which are as follows:

4 to 2 line Encoder:

In 4 to 2 line encoder, there are total of four inputs, i.e., Y 0, Y1, Y2, and Y3, and
two outputs, i.e., A0 and A1. In 4-input lines, one input-line is set to true at a
time to get the respective binary code in the output side. Below are the block
diagram and the truth table of the 4 to 2 line encoder.

Block Diagram:
Truth Table:

The logical expression of the term A0 and A1 is as follows:

10 Sec
How to find Nth Highest Salary in SQL

A1=Y3+Y2
A0=Y3+Y1

Logical circuit of the above expressions is given below:

8 to 3 line Encoder:

The 8 to 3 line Encoder is also known as Octal to Binary Encoder. In 8 to 3


line encoder, there is a total of eight inputs, i.e., Y 0, Y1, Y2, Y3, Y4, Y5, Y6, and
Y7 and three outputs, i.e., A0, A1, and A2. In 8-input lines, one input-line is set to
true at a time to get the respective binary code in the output side. Below are
the block diagram and the truth table of the 8 to 3 line encoder.

Block Diagram:

Truth Table:

The logical expression of the term A0, A1, and A2 are as follows:

A2=Y4+Y5+Y6+Y7
A1=Y2+Y3+Y6+Y7
A0=Y7+Y5+Y3+Y1

Logical circuit of the above expressions is given below:


Decimal to BCD Encoder

The Octal to Binary Encoder is also known as 10 to 4 line Encoder. In 10 to 4


line encoder, there are total of ten inputs, i.e., Y 0, Y1, Y2, Y3, Y4, Y5, Y6, Y7, Y8, and
Y9 and four outputs, i.e., A0, A1, A2, and A3. In 10-input lines, one input-line is
set to true at a time to get the respective BCD code in the output side. The
block diagram and the truth table of the decimal to BCD encoder are given
below.

Block Diagram:
Truth Table:

The logical expression of the term A0, A1, A2, and A3 is as follows:

A3 = Y9 + Y8
A2 = Y7 + Y6 + Y5 +Y4
A1 = Y7 + Y6 + Y3 +Y2
A0 = Y9 + Y7 +Y5 +Y3 + Y1
Logical circuit of the above expressions is given below:

Priority Encoder:

4 to 2 line Priority Encoder:

In this priority encoder, there are total of 4 inputs, i.e., Y 0, Y1, Y2, and Y3, and
two outputs, i.e., A0 and A1. The Y3 has high and Y0 has low priority inputs.
When more than one input is '1' at the same time, the output will be the
(binary) code corresponding to the higher priority input. Below is the truth
table of the 4 to 2 line priority encoder.

Truth Table:
The logical expression of the term A0 and A1 can be found using K-map as:

A1=Y3+Y2
A0=Y3+Y2'.Y1

Logical circuit of the above expressions is given below:


Uses of Encoders:

1. These systems are very easy to use in all digital systems.


2. Encoders are used to convert a decimal number into the binary number.
The objective is to perform a binary operation such as addition,
subtraction, multiplication, etc.

You might also like