Product List

Effective 01/14/11

Metering Pumps
and
Control Systems
2

TABLE OF CONTENTS
Important Information
When Placing An Order 3
Feature Selection Guide 4
Model Selection Guide 5-11

PULSAtron - Electronic Metering Pumps

Series MP 12-13
Series E Plus 14-15
Series HV 16-17
Series E 18-19
Series E-DC 20-21
Series D 22-23
Series A Plus 24-25
Series C Plus 26-27
Series C 28-29

PULSAtron PLUS - Electronic Metering Pumps with Integrated Controller

Series CW 30-31
Series CL 32-33
Series WT 34-35
Series ET 36-37
Series T7 38-39

Electronic Metering Pump Accessories

KOPkits 40-41
Suction/Discharge Valves 42
Parts 43-45

OMNI - Mechanical Diaphragm Pumps

Model Selection 46-48
Accessories and KOPkits 49

Chem-Tech Pumps – Peristaltic Metering Pumps

Series XP 50
Series XPV 51
Series XP and XPV Parts 52
Mechanical Diaphragm Pumps
Prime Performance 53
Series 100, 100D, 150, 150D, 200 and Parts 54-57
Series 250 and Parts 58
Series 300 and Parts 59-60
Piston Pumps
Series 400 61
Series 500 and Parts 62-63

Mec-O-Matic Pumps – Diaphragm Metering Pumps

Stingray 100, 200 and Parts 64-65
T-2000 65
Peristaltic Metering Pumps
Dolphin Series and Related Parts 66
VSP Series and Parts 67
2400T, 2400T Plus, 2400T-DC and Parts 68

Policies and Procedures 69-70

Terms and Conditions 71
DUE TO CONTINUOUS IMPROVEMENT OF OUR PRODUCTS, WE RESERVE THE RIGHT
TO UPDATE THE INFORMATION CONTAINED IN THIS CATALOG WITHOUT NOTICE.
 3

IMPORTANT INFORMATION
WHEN PLACING AN ORDER
1) Fax, mail or telephone orders directly to the Customer Service Department:
Pulsafeeder Incorporated—A Unit of IDEX Corporation
Standard Product Operations Main Office & Manufacturing Facility
27101 Airport Road, Punta Gorda, Florida, USA 33982-2462 E-Mail: [email protected]
Telephone: 800-333-6677 or 941-575-3800 Fax: 800-456-4085 or 941-575-4085
www.pulsatron.com
2) Please have the following information available when placing an order:
Account Name Special Tags or Marks (if needed)
Billing Zip Code Item(s) Being Ordered
Purchase Order Number Quantity of Each Item
Ship To Address
3) Orders are immediately entered into the computer upon receipt. Our ability to change in house orders is limited.
Please be certain your orders are complete when placed.

4) For assistance or to order a “special” pump model not available in the price schedule, please contact our Technical
Support Department.

5) Orders are assigned standard lead times based on the size of the order and the time required to manufacture the
particular products. Requests to expedite orders may be routed through our Customer Service Department.

6) Repairs and returns are coordinated through our Customer Service Department. All orders returned must have
factory authorization and are subject to a 25% restocking charge for standard product.

7) Other Locations:

PULSAFEEDER (Knight UK Limited) Far East (Office Only)

15 Brunel Centre Newton Road Room 3403, South Tower, Hong Kong Plaza
Crawley, West Sussex, England, RH10 9YU No 283 Huai Hai Zhong Road
Tel: +44 80022102210 Shanghai 200021, China
Fax: +44 80044104410 Tel: 86-2163906367
Fax: 86-2163863338
Latin America (Office Only)
Hegel 153-602, Colonia Polanco, IDEX India Private Ltd.
11560 Mexico, D.F., Mexico 202 Matharu Arcade
Tel: 52-555-255-1357 32, Subhash Road, Vile Parie (East),
Fax: 52-555-255-1356 Mumbai-400 057, India
Tel: 91-22-66976631
Fax: 91-22-66976633
Prices are subject to change without notice and are effective when order is accepted and acknowledged at point of
shipment.
When ordering, specify your P.O. number, model number, quantity, price, shipping and/or billing address and order
date.
Standard terms are NET 30 days from date of invoice for approved accounts on open account.
WE ACCEPT VISA AND MASTERCARD.
ONE PERCENT DISCOUNT AVAILABLE FOR PAYMENT WITHIN 10 DAYS OF INVOICE DATE FOR AC-
COUNTS THAT ARE CURRENT.
PAYMENT BY CREDIT CARD WILL NOT RECEIVE AN ADDITIONAL DISCOUNT.
All prices are F.O.B. Punta Gorda, FL or factory warehouse location.
Custom product sales are final.
Charges for export documentation apply.
Expediting fees may apply.
Fees for changes to or cancellation of orders may apply.
Minimum factory order of $50.
Possession of price schedule does not guarantee right to purchase direct from factory.
DUE TO CONTINUOUS IMPROVEMENT OF OUR PRODUCTS, WE RESERVE THE RIGHT
TO UPDATE THE INFORMATION CONTAINED IN THIS CATALOG WITHOUT NOTICE.
4

Feature Selection Guide

Pulsafeeder offers one of the most flexible electronic metering pumps in the world. The product can be configured to meet a large
variety of applications and needs. The next few pages will guide you in structuring a complete and correct model number.
The first step in selecting the right model for your application is to select the correct Series. Each Series offers a variety of features
that distinguish it from other Series. Within each Series are selections of models that offer different flow/pressure envelopes to
choose from.
The following descriptions will help you understand the different features and then the chart at the bottom of the page will let you
select the appropriate models that have the features you need.

4-20mA Control the pump stroke frequence based on a current input signal from an external device. At 4mA input,
the pump will not stroke. At 20mA input, the pump will stroke 100%
20-4mA Same as 4-20 except that at 20mA input, the pump will not stroke and at 4mA input, the pump strokes at
100%.
External Pace / Allows the pump stroke to be controlled by an external dry contact closure, such as is provided by a Water
Water Meter Meter. For each closure, the pump will stroke one time. Some models provide the ability to multiply or divide
the pulses.
Stop Function A dry contact input that will stop the pump on closure and allow the pump to operate when open.
Touch Pad Electronic 'touch pad' control with internationally recognized symbols.
Digital Display Pump parameters are displayed on an LCD or LED type display.
Signal Relay Provides a 24V DC signal output from the pump based on user specified conditions.
Power Relay Provides AC power output from the pump based on user specified conditions.
Alarm Display Flashing display or LED indicator that will display an alarm condition on the front panel of the pump.
Timed Sequences Ability to pre-program operation for repetitive metering.
Programmable Timer Timer that can be programmed with up to 8 on/off cycles per day during a 7-day week.
Hall Effect Hall Effect Water Meter input.
Conductivity Control Includes a conductivity controller built into the pump.
Bleed Relay Separate relay used to control a solenoid that will "Bleed" a cooling tower as part of a control system.
Timer Control User defined timer functions that control when the pump will operate. Used in Cooling Tower control systems.
Flow Control Optional Flow Switch turns pump on when flow is active.
Signal/Power Relay
External Pace And

Timed Sequences
External Pace Or

Hall Effect Input

Digital Display

Programmable
Stop Function

Stop Function

Alarm Signals

Timer Control

Flow Control
Conductivity

Bleed Relay
Touch Pad

Turn
4-20 mA

20-4 mA

Control

Flow Capacity Pressure

Timer

Down
Series GPH LPH PSIG BAR Ratio
MP 0.13 to 21 0.50 to 79.5 20 to 300 1.3 to 21 1000:1 S S S S S S S S
E Plus 0.13 to 25 0.50 to 94.6 30 to 300 2.0 to 21 100:1 O O
HV 0.50 to 10 1.9 to 37.9 80 to 100 5.6 to 17 100:1 O
E 0.13 to 25 0.50 to 94.6 20 to 300 1.3 to 21 100:1
E-DC 0.25 to 1.85 0.90 to 7.0 100 to 150 7 to 10 100:1
D 0.25 to 2 0.90 to 7.6 50 to 250 3.3 to 17 100:1 S S S S
A Plus 0.25 to 2 0.90 to 7.6 50 to 250 3.3 to 17 100:1 O
C Plus 0.25 to 1.25 0.90 to 4.7 80 5.6 100:1 O
C 0.25 to 1.25 0.90 to 4.7 80 5.6 10:1 O
CW 0.25 to 1.25 0.90 to 4.7 100 to 150 7 to 10 100:1 S S S S S S S S
CL 0.25 to 1.25 0.90 to 4.7 100 to 150 7 to 10 100:1 S S S S S S
WT 0.25 to 1.25 0.90 to 4.7 100 to 150 7 to 10 100:1 S S S S S S
ET 0.21 to 2 0.80 to 79.5 20 to 250 1.3 to 17 100:1 S S
T7 0.50 to 2 1.9 to 7.6 100 7 10:1 S

S = S t a nda rd F e a t ure s O = O pt io na l F e a t ure s

 5

Model Selection Guide

Once you have selected the appropriate Series, you must configure the model so that it is built with the features you
desire. The Configuration Guide associated with each Series will present the most popular selections. Select one
code from each category to build up a complete model string.

To help you better understand the model string, in the following pages, we will explain what each of the digits represent
and provide you some additional charts to help you select options not found in the Configuration Guides.

Model Selection:
The first four digits represent the Series and Flow/Pressure Selection.

LB02
Series
LB02
The first digit will always start with the letter „L‟. Flow/Pressure Code

Digits 3 & 4 represent the Flow/Pressure Code.

All PULSAtron models begin with this letter. The second
letter designates the Series (e.g. Series MP, Series E+, This code represents the specific flow/pressure rating for
Series A+, etc.). Each series has a different set of fea- the model and can be found in the specification for each
tures that are available in terms of control and flow/ Series.
pressure capacity. The next two digits represent the
flow/pressure capacity of the pump.

Series Code Designator

Series MP M
Series E Plus
Series HV
P
V
LB02SA
Series E E
Series E-DC S Electrical
Series D F Controls
Series A Plus B
Digits 5 & 6 represent the Controls and Electrical selec-
Series C Plus D
tions.
Series C & T7 C
Series CW W These selections are explained for each model in the
Series CL L Configuration Guide.
Series WT Q
Series ET T
6

Selection Guide cont’d.

Selecting the Wet-End Code & Connection Type:
Digits 7-10 in the string represent the wet-end code. It is the group of four digits set apart by the dash lines.

LB02SA-PTC1
These four digits represent your
wet-end code and connection type.

The four digits in the wet-end code represent the Head Material, Seats & O-Rings, Ball Material and Connection type.
Using the above example, the code breads down as follows:

P - Head Material, including fittings. In this example, the P represents GFPPL.

T - Seat & O-Ring Material. In this example, the T represents TFE.
C - Types of Balls used in the valves. In this example, the C represents Ceramic.
1 - Connection type. In this example, the 1 represents tubing connections for 3/8” OD tubing.

In the configuration Guide, we have listed the most popular Wet-End

codes. If you don‟t find the materials or connection selection to meet
your needs, refer to the following selection guides to configure the
proper Wet-End Code.
Chemical Compatibility Chart
Liquid End
Selecting the Wet-End Code: Chemical Code
The wet-end code represents the materials of construc-
ACETIC ACID, 5 - 10% PHC
tion that will be in contact with the chemical you are ALUMINUM SULFATE VHC
pumping. It is critical that the materials selected are AMMONIA, 10% PHC
compatible. If you do not find the wet-end code to meet BROMINE KTC
your application in the configuration guides, you can use CALCIUM HYPOCHLORITE VVC
the Wet-End Code Selection Guide to determine the cor- CITRIC ACID, 10 - 20% PHC
rect Head Material, Seats & O-Rings and Balls. If you do DEAE - Steamline Treatment ATS
not know what materials are compatible with the chemi- ETHYLENE GLYCOL PTC
cals you are pumping, refer to the chemical compatibility FERRIC CHLORIDE VTC
chart below. We have identified the proper wet-end code FERRIC SULFATE PTC
FLUOSILICIC ACID PTT
for the chemicals in the list. If your chemical is not found
HYDROCHLORIC ACID, 0 - 37% PTC
in the list, please contact your chemical supplier or visit HYDROCHLORIC ACID, 37 - 100% KTT
www.pulsatron.com for a complete listing. HYDROFLUOSILICIC ACID, 20% PTT
HYDROGEN PEROXIDE, 0 - 30% VVC
PULSAtron Wet-End Code Selection Guide LACTIC ACID PTC
_ _ _ NITRIC ACID, 0 - 20% PVC
Head & Fittings PHOSPHORIC ACID, 0 - 100% KTC
A = 316 Stainless Steel (All models except H8) POTASSIUM CHLORIDE PTC
POTASSIUM PERMANGANATE PTC
K = PVDF (Kynar) (not available for J7, H8 models)
SODIUM BI-CARBONATE PTC
P = GFPPL (Polypropylene)
SODIUM BI-SULFATE PTC
V = PVC (Poly Vinyl Chloride) (for models rated
SODIUM BI-SULFITE PTC
< 150 psi excluding K7, H7, H8) SODIUM CARBONATE PTC
W = PVC (for models > 150 psi and K7, H7, H8) SODIUM HYDROXIDE, 0 - 50% PHC
SODIUM HYPOCHLORITE VVC
Seats
SODIUM NITRATE PTC
H = CSPE
SODIUM SILICATE PHC
T = TFE (not available with TFE ball over 150 psi) SODIUM SULFATE PHC
V = Viton (150 psi max.) SODIUM SULFIDE PHC
SULFURIC ACID, 0 - 10% PTC
Balls
SULFURIC ACID, 10 - 75% PTC
C = Ceramic
SULFURIC ACID, 95 - 100% KTC
H = Alloy C (Hastelloy)
S = 316 Stainless Steel This is an abbreviated version using most common
T = TFE (not available with TFE seat over 150 psi) chemicals. Refer to the Chemical Resistance Guide
(EMP-030) for a more detailed listing.
CSPE is generic formulation of Hypalon, a registered trademark of E.I. DuPont Ccmpany.
Viton is a registered trademark of E.I. DuPont Company.
 7

Selecting the Connection Code:

Selecting the proper connection code is probably the most difficult part of choosing a PULSAtron pump. Because of
the flexibility built into this product line to meet a large variety of applications, the connection codes are determined by
alot more factors than just the size of the tubing. Connection code is probably the wrong name for this selection be-
cause you are selecting more than just the tubing size. This code also determines the type of valves used in the pump.
The valve type is determined by factors such as flow rate of the pump, ball type selected and viscosity of the fluid you
will be pumping.

Flow Rate:
The pump you select is rated to pump a certain number of gallons per hour (GPH). When selecting the connection
code, please note the GPH limitations and select a connection that fits within the parameters of the pump model that
you selected.

Ball Type:
If the material selected for the balls used in the check valves is TFE, you will probably need to use a spring-loaded con-
nection. This is due to the fact that the weight of the balls will not allow them to seat properly without the spring. See
the connection chart for a list of spring loaded connection types.

Viscosity:
Viscosity of the fluid you are pumping impacts the connection. The higher viscosity fluids (>3000 cps) require larger
connection types and spring-loaded valves. Medium viscosity fluids (1000 to 3000 cps) can be pumped without the
spring-loaded valves but you must use SS balls with these connections in order for the balls to seat properly in the
valve.

Connection Codes
Code Connect Type Suction Discharge Spring GPH Flow Limitations Viscosity Other Factors
2 Piping .25" FNPT .25" FNPT 0 - 1.88 1000 up to 3000 cps w/ SS balls No Bleed Valve
4 Piping .25" FNPT .25" FNPT 1.63 - 10 1000 up to 3000 cps w/ SS balls No Bleed Valve
6 Piping .25" FNPT .25" FNPT Yes Up to 10 less than 10,000 cps No Bleed Valve
8 Piping .50" FNPT .50" FNPT Yes Up to 25 less than 10,000 cps No Bleed Valve
C Piping .50" FNPT .50" FNPT 25 1000 up to 3000 cps w/ SS balls No Bleed Valve
G Piping .25" FNPT .25" FNPT Yes 0 - 1.88 1000 up to 3000 cps w/ SS balls No Bleed Valve
I Piping .50" MNPT .50" MNPT Yes Up to 10 less than 10,000 cps No Bleed Valve
L Piping .50" MNPT .50" MNPT 0 - 1.88 1000 up to 3000 cps w/ SS balls No Bleed Valve
X Piping .50" MNPT .50" MNPT 1.63 - 10 1000 up to 3000 cps w/ SS balls No Bleed Valve
1 Tubing .25" x .38" .25" x .38" 0 - 1.88 1000 up to 3000 cps w/ SS balls
3 Tubing .38" x .50" .38" x .50" 1.63 - 10 1000 up to 3000 cps w/ SS balls
5 Tubing .50" x .75" .38" x .50" Yes Up to 10 less than 10,000 cps
7 Tubing .50" x .75" .50" FNPT Yes Up to 25 less than 10,000 cps No Bleed Valve
9 Tubing .25" x .38" .25" x .38" Yes 0 - 1.88 1000 up to 3000 cps w/ SS balls Degas Head/No Bleed Valve
A Tubing .38" x .50" .38" x .50" 0 - 1.88 1000 up to 3000 cps w/ SS balls
B Tubing .50" x .75" .50" x .75" 25 1000 up to 3000 cps w/ SS balls No Bleed Valve
D Tubing .25" x .38" .25" x .38" Yes 0 - 1.88 1000 up to 3000 cps w/ SS balls
E Tubing .38" x .50" .38" x .50" Yes 0 - 1.88 1000 up to 3000 cps w/ SS balls
F Tubing .38" x .50" .38" x .50" Yes 1.63 - 10 1000 up to 3000 cps w/ SS balls Not Available In PVDF
H Tubing .25" x .38" .25" x .38" 1.63 - 10 1000 up to 3000 cps w/ SS balls
J Tubing .25" x .38" .25" x .38" 0 - 1.04 1000 up to 3000 cps w/ SS balls
K Tubing .50" x .75" .50" x .75" Yes 1.88 - 25 (<50 psi) less than 10,000 cps No Bleed Valve
LPH Flow Limitations
M Piping G 1/2 A G 1/2 A 6.15 - 37.85 1000 up to 3000 cps w/ SS balls
R Piping G 1/2 A G 1/2 A 0 - 7.10 1000 up to 3000 cps w/ SS balls
N Tubing 4 x 10 mm 4 x 10 mm 0 - 7.10 1000 up to 3000 cps w/ SS balls
P Tubing 4 x 6 mm 4 x 6 mm 0 - 3.94 1000 up to 3000 cps w/ SS balls
Q Tubing 10 x 14 mm 10 x 14 mm 6.15 - 37.85 1000 up to 3000 cps w/ SS balls
S Tubing 6 x 10 mm 6 x 10 mm > 18.93 1000 up to 3000 cps w/ SS balls
T Tubing 6 x 10 mm 6 x 10 mm 0 - 7.10 1000 up to 3000 cps w/ SS balls Degas Head/No Bleed Valve
U Tubing 6 x 10 mm 6 x 10 mm 0 - 7.10 1000 up to 3000 cps w/ SS balls
V Tubing 12 x 19 mm 12 x 19 mm > 29.96 1000 up to 3000 cps w/ SS balls No Bleed Valve
W Tubing 10 x 16 mm 10 x 16 mm 6.15 - 37.85 1000 up to 3000 cps w/ SS balls
Y Tubing 6 x 12 mm 6 x 12 mm 0 - 7.10 1000 up to 3000 cps w/ SS balls

Pumps ranging from 0.25 gph (0.9 lph) to 0.90 gph (3.4 lph) with the stainless steel ball option (―S‖ in the 9th
digit of the model number) must select a connection code with a spring.
- Pumps less than or equal to .25 gph (0.9 lph) require a connection code with a spring and must use a ce-
ramic ball in place of stainless steel.
- Stainless steel head assemblies are only available in piping connections.
8

Selection Guide cont’d.

Sensor/Flow Options (Models D,

CL, CW & WT Only):
The Series D, CL, CW and WT have optional features that are covered by two additional digits in the Model Selection.

Series D:

LF02SA-PTC1-1A
Flow Switch Option
Electronic Connection Option

These selections are explained for each model in the Configuration Guide.
Series CL, CW & WT:
.

LW02SA-PTC1-2A
Flow Switch/Assembly Option
Sensor Option

These selections are explained for each model in the Configuration Guide.

Suffix Code:

LW02SA-PTC1-XXX Suffix Code

The last three digits of the model string are referred to as the Suffix Code. It is through the suffix code that the pump
can be customized with optional features or customer specific features, e.g. private labeling. If your company has spe-
cific features that will be ordered on every pump, contact customer service with a description of what you want custom-
ized. We will then assign a unique suffix code that can be used as the last three digits in the model string when you
place an order.

CZXXX = CE Approval
This suffix code tells us that you require CE Approval on the pump you are ordering. This suffix code is five digits and
can be used in conjunction with other suffix codes by replacing the XXX after the CZ with another suffix code. For in-
stance, if you require CE Approval and a Five Function Valve (shown below), the suffix code would be CZ500.
 9

Standard Suffix Code Descriptions:

On the following pages are additional features that can be added to your PULSAtron pump through the use of the
Suffix Code. Anytime you order a pump with one of these codes, it will be configured with that option.

130 = PVDF Tubing

This suffix code will replace the standard pump tubing with PVDF Tubing.

500 = Five Function Valve

The five function valve is easily installed, no tools required.
The valve operates with all PULSAtron models up to 240
GPD. The five function valve is packed with features that
increase safety, enhance performance and generally im-
proves the convenience of operation.

FEATURES
Pressure Relief – Allows for relief of excessive pres-
sure in discharge line to protect connections and tub-
ing.
Back Pressure – Maintains output reproducibility and
allows metering into atmospheric discharge.
Anti-Siphon – Prevents siphoning through the pump
when point of injection is lower than the pump or into
the suction line of another pump. Rated at total vac-
uum.
Air Bleed – Used during priming to manually remove air from the REAR VIEW FRONT VIEW
pump head.
Discharge Drain – Depressurize pump discharge line without loosening tubing or fittings. Protects the operator
from chemical exposure.

SPECIFICATIONS
Material Of Construction:
Valve Body Polyvinylidene Flouride (PVDF)
Diaphragm TFE faced CSPE
O-Rings TFE
Hardware 18-8 Stainless Steel (Recessed)

Maximum Operating
Pressure: 300 PSI/21 BAR (except PVC)

Maximum Flow: 10 GPH (37.85 LPH)

Maximum Viscosity: 1000 CPS

Pressure Relief
Settings: 275 PSI (17 BAR) - red
(nominal cracking 175 PSI (12 BAR) - green
pressure) 125 PSI (8.6 BAR) - blue
50 PSI (2.8 BAR) - black (PVC only)

Note: Pressure relief will occur at no more than 50% above maximum rating of pump.

OPERATION

The functions are selected by setting two dual position selector knobs. The label on the back panel of the valve identi-
fies each function with selector knob positions.

The five function valve is compatible with most PULSAtron pumps. Connected to the existing discharge valve the five
function valve is capable of handling a large output flow as well as viscous liquids. A return port located on the side
body provides flow of chemical back to the solution tank when in the air bleed or drain discharge mode.
10

Selection Guide cont’d.

520 = DG/5FV Five Function

Valve with De-Gas
With the DG/5FV you don‟t have to give up the accuracy
and control of a solenoid metering pump in order to
pump gaseous solutions. Available in a variety of materi-
als and popular sizes, the DG/5FV is ready to tackle
most applications. Not only does the DG/5FV provide
degassing, it is packed with features that increase safety,
enhance performance and generally improves the con-
venience of operation.

FEATURES
De-Gas – Bypass gasses and fluid during normal
pump operation. Allows for the constant removal of
gases that would otherwise “air bind” the pump.
Back Pressure – Maintains output reproducibility and
allows metering into atmospheric discharge.
Anti-Siphon – Prevents siphoning through the pump REAR VIEW FRONT VIEW
when point of injection is lower than the pump or into
the suction line of another pump. Rated at total vacuum.
Air Bleed – Used during priming to manually remove air from the pump head.
Discharge Drain – Depressurize pump discharge line without loosening tubing or fittings. Protects the operator
from chemical exposure.

SPECIFICATIONS
Material Of Construction:
Valve Body Polyvinylidene Flouride (PVDF)
Diaphragm TFE faced CSPE
O-Rings Viton or CSPE
Hardware 18-8 Stainless Steel (Recessed)

Maximum Flow: 10 GPH (37.85 LPH)

Minimum Flow: 3 GPD (.47LPH)

Maximum Viscosity: 1000 CPS

MAX Pressure Ratings: Up to 250 psi (17 BAR)

Note: Degas/bypass volume is adjustable, typically 1-10% of pump output.

Connections: ¼” (0.635 cm) Male NPT

½” (1.27 cm) OD tubing
3/8” (0.95 cm) OD tubing

All ports (input, output & bypass) on the selected valve will be the same.

OPERATION

The functions are selected by setting two dual position selector knobs. The label on the back panel of the DG/5FV
identifies each function with selector knob positions.

The DG/5FV is compatible with most PULSAtron pumps. Connected to the existing discharge valve the GG/5FV is ca-
pable of handling a large output flow as well as viscous liquids. A return port located on the side body provides flow of
chemical back to the solution tank when in the degas, air bleed or drain discharge mode.
 11

ITS = Integrated Tank System

The ITS System is a completely integrated tank system constructed of high density UV resistant polyethylene (PE) with
a 15 gallon capacity. This tank system is translucent with 5 gallon increments and the tank's low level indicator allows
visual monitoring of chemicals without opening the tank. The tight fitting child-proof lid keeps the chemical free of con-
taminants and protects the surrounding area from chemical fumes.

The ITS System also allows for easy access to the liquid end and control panel of the mounted pump.

A system consists of a chemical tank with lid and bulkhead fittings; a liquid level indicator float assembly; and feeder
mounting hardware.

ITS Tank not available on LM, LP, LT, and LE: H4, H5, H6, H7, J7, H8, K7 models) If you re-
quire a different type or size tank, please refer to our accessory price book.
12

Electronic Metering Pumps

Series MP
Key Features
Automatic Control, Fully scalable 4-20mA current signal that can also be
calibrated to precisely match the current signal reading of the sending device.
Manual Control allows for a combined 1000:1 turndown resulting in accurate
metering for critical applications.
Flow Verification option is available on select sizes.
Relay Output for computer interface or AC power allows for external control.
Six-button Touch Pad Control with internationally recognized symbols for
simplified programming.
Simple Prompts in plain language allow for easy-to-understand instructions for
programming. Available in three languages.
Alarm Signals for signal loss, full count, circuit failure, pulse overflow and pulse
rate high. Liquid low level indicator capability is standard.
Timed Sequences can be set for selected intervals and rate for repetitive
metering.
Pulse Signals can be multiplied or divided by 1 to 999 allowing for pumps to
handle peak requirements.
LCD, 3 line backlit multi-lingual display allows for easy reading and user-friendly
programming.
Calibrated Flow Rate display with total volume pumped last day, month and
since last reset.

Pressure and Flow Rate Capacity

MODEL LMK2 LMB2 LMA2 LMD3 LMB3 LMA3 LMK3 LMF4 LMD4 LMB4 LMH4 LMG4 LME4 LMK5 LMH5 LMH6 LMK7 LMH7 LMH8
Capacity GPH 0.13 0.21 0.25 0.50 0.50 0.50 0.60 0.85 0.90 1.00 1.70 1.75 1.85 2.50 3.15 5.00 8.00 10.00 21.00
nominal GPD 3 5 6 12 12 12 14 20 22 24 41 42 44 60 76 120 192 240 504
(max .) LPH 0.5 0.8 0.9 1.9 1.9 1.9 2.3 3.2 3.4 3.8 6.4 6.6 7.0 9.5 11.9 18.9 30.3 37.9 79.5
Pressure PSIG 300 250 150 250 150 100 100 250 150 100 250 150 100 150 150 100 50 35 20
(max .) BAR 21 17 10 17 10 7 7 17 10 7 17 10 7 10 10 7 3.3 2.4 1.3
Connections 1/4" ID X 3/8" OD 3/8" ID X 1/2" OD
3/8" ID X 1/2" OD 1/2" ID X 3/4" OD (LPH8 ONLY)
Tubing FLOW VERIFICATION (See Note)
1/4" FNPT 1/4" FNPT
Piping 1/2" FNPT
Note: Flow Verification: Av ailable on K3, B4 and E4 w ith connection code 1; H6, K7 and H7 w ith connection code H; 1/4” ID x 3/8” OD only .

Engineering Data Engineering Data

Reproducibility: +/- 2% at maximum capacity Power Input: 115 VAC/50-60 HZ/1 ph
Viscosity Max CPS: 230 VAC/50-60 HZ/1 ph
For viscosity up to 3000 CPS, select connection size 3, 4, B or C with 316SS ball material. Average Current Draw:
Flow rate will determine connection/ball size. Greater than 3000 CPS require spring loaded @ 115 VAC; Amps: 1.0 Amps
ball checks. See Selection Guide for proper connection. @ 230 VAC; Amps: 0.5 Amps
Controls: 6-Station Membrane Switch Peak Input Power: 300 Watts
Status Display: 16-Position LCD Dot Matrix Backilght Average Input Power @ Max SPM: 130 Watts
LED Indicator Lights, Panel Mount: Power On - Green
Pulsing - Green Flashing
Stop - Red
Stroke Frequency Max SPM: 125
External Stroke Frequency Control (Automatic):
4-20 mADC, 20-4 mADC External Pacing
Output Relay (Signal Level Option): 24 VDC, 10 mA
Output Relay (Power Option): 250 VAC, 50/60 HZ, 0.5A
Stroke Frequency Turn-Down Ratio: 100:1
Stroke Length Turn-Down Ratio: 10:1
 13

PULSAtron Series MP Selection Guide LM_ _ _ _ - ___ _ - ___

MODELS: K2 = 0.13 gph / 3 gpd ( 0.5 lph) max pres.: 300 PSI (21 BAR)
B2 = 0.21 gph / 5 gpd ( 0.8 lph) max pres.: 250 PSI (17 BAR)
D3 = 0.50 gph / 12 gpd ( 1.9 lph) max pres.: 250 PSI (17 BAR)
F4 = 0.85 gph / 20 gpd ( 3.2 lph) max pres.: 250 PSI (17 BAR)
H4 = 1.70 gph / 41 gpd ( 6.4 lph) max pres.: 250 PSI (17 BAR)
A2 = 0.25 gph / 6 gpd ( 0.9 lph) max pres.: 150 PSI (10 BAR)
B3 = 0.50 gph / 12 gpd ( 1.9 lph) max pres.: 150 PSI (10 BAR)
D4 = 0.90 gph / 22 gpd ( 3.4 lph) max pres.: 150 PSI (10 BAR)
G4 = 1.75 gph / 42 gpd ( 6.6 lph) max pres.: 150 PSI (10 BAR)
K5 = 2.50 gph / 60 gpd ( 9.5 lph) max pres.: 150 PSI (10 BAR)
H5 = 3.15 gph / 76 gpd (11.9 lph) max pres.: 150 PSI (10 BAR)
A3 = 0.50 gph / 12 gpd ( 1.9 lph) max pres.: 100 PSI ( 7 BAR)
K3 = 0.60 gph / 14 gpd ( 2.3 lph) max pres.: 100 PSI ( 7 BAR)
B4 = 1.00 gph / 24 gpd ( 3.8 lph) max pres.: 100 PSI ( 7 BAR)
E4 = 1.85 gph / 44 gpd ( 7.0 lph) max pres.: 100 PSI ( 7 BAR)
H6 = 5.00 gph / 120 gpd (18.9 lph) max pres.: 100 PSI ( 7 BAR)
K7 = 8.00 gph / 192 gpd (30.3 lph) max pres.: 50 PSI (3.3 BAR)
H7 = 10.0 gph / 240 gpd (37.9 lph) max pres.: 35 PSI (2.4 BAR)
H8 = 21.0 gph / 504 gpd (79.5 lph) max pres.: 20 PSI (1.3 BAR)

CONTROLS: T = Signal Level Output Relay

K = Power Level Output Relay

ELECTRICAL: A = 115 Volt / 50-60Hz

1 = 115 Volt / 50-60Hz (without agency approvals)
B = 230 Volt / 50-60Hz / 1ph with 6' (1.8m) 3-wire US Plug
2 = 230 Volt / 50-60Hz (without agency approvals)
LIQUID END PTC = GFPPL / TFE / Ceramic
MATERIALS: KTC = PVDF / TFE / Ceramic (not available on H8)
Pump Head & VHC = PVC / CSPE / Ceramic (not available on H7, H8, K7)
Fittings/Seats VTC = PVC / TFE / Ceramic (models <= 150 psi excluding H7, H8, K7)
& O-rings/Balls WTC = PVC / TFE / Ceramic (models > 150 psi and H7, H8, K7)
VVC = PVC / Viton / Ceramic (not available on H8)
ATS = 316 S.S. / TFE / 316 S.S. (must use FNPT piping connection) (not available on H8)
See page 6 for additional liquid end materials.

CONNECTION 1 = Tubing .25" I.D. x .38" O.D. / .25" Ball, 0 - 1.88 GPH
SIZES: 3 = Tubing .38" I.D. x .50" O.D. / .38" Ball, 1.63 - 10 GPH
9 = Degas Head: .25" I.D. x .38" O.D. / 0-1.83 GPH
J = Tubing, .25" I.D. x .38" O.D. / .19 Ball; 0 - 1.04 GPH
METRIC:
M = G 1/2 A Threads, .38" Ball, 6.15 - 37.85 LPH
R = G 1/2 A Threads, .25" Ball, 0 - 7.10 LPH
Y = 6 x 12mm, .25" Ball, 0 - 7.10 LPH
Please Refer to page 7 for additional connection sizes. All pumps with tubing connections come with the following
items (except for LMH8, LPH8, LEH8, HV series pumps and pumps >150PSI in PVC): 4' Suction, 4' Return, 8' dischage
tubing, footvalve/strainer assy., injection valve and bleed valve.
SUFFIX XXX = No Additional Options
CODES: 130 = PVDF Tubing
500 = Five Function Valve
520 = Five Function Degas Valve
FVE = Flow Verification / EPDM (not available on pumps greater than 100 psi)
FVV = Flow Verification / Viton (not available on pumps greater than 100 psi)
ITS = 15 gal. ITS Tank System (ITS Tank not available on LM, LP, LT, and LE: H4, H5, H6, H7, H8, J7, K7 models)
CZXXX = CE Approval (5 digits used for this suffix code)
See pages 9, 10 & 11 for additional information and specs.
A completed model number should look like 'LMB3TA-PTC1-XXX'

Series MP Dimensions (inches)

Model Shpg Model Shpg
Dimensions No. A B B1 C C1 D E Wt No. A B B1 C C1 D E Wt
LMA2 5.4 10.3 - 10.8 - 7.5 8.9 13 LMH4 6.2 10.9 - 11.2 - 8.2 9.5 21
LMA3 5.4 10.6 - 10.7 - 7.5 9.2 13 LMH5 6.2 11.3 - 11.2 - 8.2 9.9 21
LMB2 5.4 10.3 - 10.8 - 7.5 8.9 13 LMH6 6.2 11.3 - 11.2 - 8.2 9.9 21
LMB3 5.4 10.6 - 10.7 - 7.5 9.2 13 LMH7 6.1 11.7 - 11.2 - 8.2 10.3 21
LMB4 5.4 10.6 - 10.7 - 7.5 9.2 13 LMH8* 6.1 - 10.9 - 10.6 8.2 - 25
LMD3 5.4 10.6 - 11.2 - 7.5 9.2 15 LMK2 5.4 10.3 - 10.8 - 7.5 8.9 13
LMD4 5.4 10.6 - 11.2 - 7.5 9.2 15 LMK3 5.4 10.6 - 10.7 - 7.5 9.2 13
LME4 5.4 10.6 - 11.2 - 7.5 9.2 15 LMK5 5.4 10.9 - 11.7 - 7.5 9.5 18
LMF4 5.4 10.6 - 11.7 - 7.5 9.2 18 LMK7 6.1 11.7 - 11.2 - 8.2 10.3 21
LMG4 5.4 10.6 - 11.7 - 7.5 9.2 18
NOTE: Inches X 2.54 = cm / * the LMH8 is designed w ithout a bleed v alv e av ailable
14

Electronic Metering Pumps

Series E PLUS
Key Features
Automatic Control, available with 4-20 mADC direct or external
pacing, with stop function.
Manual Control by on-line adjustable stroke rate and stroke length.
Auto-Off-Manual switch.
Highly Reliable timing circuit.
Circuit Protection against voltage and current upsets.
Panel Mounted Fuse.
Solenoid Protection by thermal overload with auto reset.
Water Resistant, for outdoor and indoor applications.
Indicator Lights, panel mounted.
Guided Ball Check Valve Systems, to reduce back flow and enhance
outstanding priming characteristics.
Safe & Easy Priming with durable leak-free bleed valve assembly
(standard).

Pressure and Flow Rate Capacity

MODEL LPK2 LPB2 LPA2 LPD3 LPB3 LPA3 LPK3 LPF4 LPD4 LPB4 LPH4 LPG4 LPE4 LPK5 LPH5 LPH6 LPK7 LPH7 LPJ7 LPH8
Capacity GPH 0.13 0.21 0.25 0.5 0.50 0.50 0.60 0.85 0.90 1.00 1.70 1.75 1.85 2.50 3.15 5.00 8.00 10.00 10.00 25.00
nominal GPD 3 5 6 12 12 12 14 20 22 24 41 42 44 60 76 120 192 240 240 600
(max .) LPH 0.5 0.8 0.9 1.9 1.9 1.9 2.3 3.2 3.4 3.8 6.4 6.6 7 9.5 11.9 18.9 30.3 37.9 37.9 94.6
Pressure PSIG 300 250 150 250 150 100 100 250 150 100 250 150 100 150 150 100 50 35 80 30
(max .) BAR 21 17 10 17 10 7 7 17 10 7 17 10 7 10 10 7 3.3 2.4 5.5 2
Connections Tubing 1/4" ID X 3/8" OD 3/8" ID X 1/2" OD
3/8" ID X 1/2" OD 1/2" ID X 3/4" OD (LPH8 ONLY)
1/4" FNPT 1/4" FNPT
Piping
1/2" FNPT

Engineering Data
Reproducibility: +/- 2% at maximum capacity
Viscosity Max CPS :
For viscosity up to 3000 CPS, select connection size 3, 4, B or C with 316SS ball material.
Flow rate will determine connection/ball size. Greater than 3000 CPS require spring loaded
ball checks. See Selection Guide for proper connection.
Stroke Frequency Max SPM: 125
Stroke Frequency Turn-Down Ratio: 10:1
Stroke Length Turn-Down Ratio: 10:1
Power Input: 115 VAC/50-60 HZ/1 ph
230 VAC/50-60 HZ/1 ph
Average Current Draw:
@ 115 VAC; Amps: 1.0 Amps
@ 230 VAC; Amps: 0.5 Amps
Peak Input Power: 300 Watts
Average Input Power @ Max SPM: 130 Watts
 15

PULSAtron Series E Plus Selection Guide LP_ _ _ _ - ___ _ - ___

MODELS: K2 = 0.13 gph / 3 gpd ( 0.5 lph) max pres.: 300 PSI (21 BAR)
B2 = 0.21 gph / 5 gpd ( 0.8 lph) max pres.: 250 PSI (17 BAR)
D3 = 0.50 gph / 12 gpd ( 1.9 lph) max pres.: 250 PSI (17 BAR)
F4 = 0.85 gph / 20 gpd ( 3.2 lph) max pres.: 250 PSI (17 BAR)
H4 = 1.70 gph / 41 gpd ( 6.4 lph) max pres.: 250 PSI (17 BAR)
A2 = 0.25 gph / 6 gpd ( 0.9 lph) max pres.: 150 PSI (10 BAR)
B3 = 0.50 gph / 12 gpd ( 1.9 lph) max pres.: 150 PSI (10 BAR)
D4 = 0.90 gph / 22 gpd ( 3.4 lph) max pres.: 150 PSI (10 BAR)
G4 = 1.75 gph / 42 gpd ( 6.6 lph) max pres.: 150 PSI (10 BAR)
K5 = 2.50 gph / 60 gpd ( 9.5 lph) max pres.: 150 PSI (10 BAR)
H5 = 3.15 gph / 76 gpd (11.9 lph) max pres.: 150 PSI (10 BAR)
A3 = 0.50 gph / 12 gpd ( 1.9 lph) max pres.: 100 PSI (7 BAR)
K3 = 0.60 gph / 14 gpd ( 2.3 lph) max pres.: 100 PSI (7 BAR)
B4 = 1.00 gph / 24 gpd ( 3.8 lph) max pres.: 100 PSI (7 BAR)
E4 = 1.85 gph / 44 gpd ( 7.0 lph) max pres.: 100 PSI (7 BAR)
H6 = 5.00 gph / 120 gpd (18.9 lph) max pres.: 100 PSI (7 BAR)
K7 = 8.00 gph / 192 gpd (30.3 lph) max pres.: 50 PSI (3.3 BAR)
H7 = 10.0 gph / 240 gpd (37.9 lph) max pres.: 35 PSI (2.4 BAR)
J7 = 10.0 gph / 240 gpd (37.9 lph) max pres.: 80 PSI (5.5 BAR)
H8 = 25.0 gph / 600 gpd (94.6 lph) max pres.: 30 PSI (2 BAR)

CONTROLS: S = Manual On/Off

M = 4-20mADC Direct, w/ Stop
E = External/Remote Pacing, w/ Stop

ELECTRICAL: A = 115 Volt / 50-60Hz

1 = 115 Volt / 50-60Hz (without agency approvals)
B = 230 Volt / 50-60Hz / 1ph with 6' (1.8m) 3-wire US Plug
2 = 230 Volt / 50-60Hz (without agency approvals)
LIQUID END PTC = GFPPL / TFE / Ceramic
MATERIALS: PTT = GFPPL / TFE / TFE
Pump Head & KTC = PVDF / TFE / Ceramic (not available on H8)
Fittings/Seats VHC = PVC / CSPE / Ceramic (not available on H7, H8, K7)
& O-rings/BallsVTC = PVC / TFE / Ceramic (models <= 150 psi excluding H7, H8, K7)
WTC = PVC / TFE / Ceramic (models > 150 psi and H7, H8, K7)
ATS = 316 S.S. / TFE / 316 S.S. (must use FNPT piping connection) (not available on H8)
See page 6 for additional liquid end materials.

CONNECTION 1 = Tubing .25" I.D. x .38" O.D. / .25" Ball, 0 - 1.88 GPH
SIZES: 3 = Tubing .38" I.D. x .50" O.D. / .38" Ball, 1.63 - 10 GPH
4 = Piping .25" FNPT / .38" Ball, 1.63 - 10 GPH
B = Tubing .50" I.D. x .75" O.D. / .50" Ball, 20.83 GPH only
METRIC:
M = G 1/2 A Threads, .38" Ball, 6.15 - 37.85 LPH
R = G 1/2 A Threads, .25" Ball, 0 - 7.10 LPH
Y = 6 x 12mm, .25" Ball, 0 - 7.10 LPH
Please Refer to page 7 for additional connection sizes. All pumps with tubing connections come with the following
items (except for LMH8, LPH8, LEH8, HV series pumps and pumps >150PSI in PVC): 4' Suction, 4' Return, 8' dischage
tubing, footvalve/strainer assy., injection valve and bleed valve.
SUFFIX XXX = No Additional Options
CODES: 130 = PVDF Tubing
500 = Five Function Valve
520 = Five Function Degas Valve
ITS = 15 gal. ITS Tank System (ITS Tank not available on LM, LP, LT, and LE: H4, H5, H6, H7, H8, J7, K7 models)
CZXXX = CE Approval (5 digits used for this suffix code)
See pages 9, 10 & 11 for additional information and specs.
A completed model number should look like 'LPB3SA-PTC1-XXX'

Series E Plus Dimensions (inches)

Model Shpg Model Shpg
Dimensions No.
A B B1 C C1 D E
Wt No.
A B B1 C C1 D E
Wt
LPA2 5.4 10.3 - 10.8 - 7.5 8.9 13 LPH4 6.2 10.9 - 11.2 - 8.2 9.5 21
LPA3 5.4 10.6 - 10.7 - 7.5 9.2 13 LPH5 6.2 11.3 - 11.2 - 8.2 9.9 21
LPB2 5.4 10.3 - 10.8 - 7.5 8.9 13 LPH6 6.2 11.3 - 11.9 - 8.2 9.9 21
LPB3 5.4 10.6 - 10.7 - 7.5 9.2 13 LPH7 6.1 11.7 - 11.9 - 8.2 10.3 21
LPB4 5.4 10.6 - 10.7 - 7.5 9.2 13 LPH8* 6.1 - 10.9 - 11.3 8.2 - 26
LPD3 5.4 10.6 - 11.2 - 7.5 9.2 15 LPK2 5.4 10.3 - 10.8 - 7.5 8.9 13
LPD4 5.4 10.6 - 11.2 - 7.5 9.2 15 LPK3 5.4 10.6 - 10.7 - 7.5 9.2 13
LPE4 5.4 10.6 - 11.2 - 7.5 9.2 15 LPK5 5.4 10.9 - 11.7 - 7.5 9.5 18
LPF4 5.4 10.6 - 11.7 - 7.5 9.2 18 LPK7 6.1 11.7 - 11.2 - 8.2 10.3 21
LPG4 5.4 10.6 - 11.7 - 7.5 9.2 18 LPJ7 6.1 10 - 10.7 - - - 21
NOTE: Inches X 2.54 = cm /* the LPH8 is designed without a bleed valve available
16

Electronic Metering Pumps

Series HV
Key Features
Automatic Control, available with 4-20 mADC direct or external
pacing, with stop function.
Manual Control by on-line adjustable stroke rate and stroke length.
Agency approved for demanding OUTDOOR and indoor applications.
Auto-Off-Manual switch.
Highly Reliable timing circuit.
Circuit Protection against voltage and current upsets.
Panel Mounted Fuse.
Solenoid Protection by thermal overload with auto reset.
Water Resistant, for outdoor and indoor applications.
Indicator Lights, panel mounted.
Guided Ball Check Valve Systems, to reduce back flow and enhance
outstanding priming characteristics.
Viscosities to 20,000 CPS.

Pressure and Flow Rate Capacity

MODEL LVB3 LVF4 LVG4 LVG5 LVH7
Capacity GPH 0.50 1.00 2.00 4.00 10.00
nominal GPD 12 24 48 96 240
(max.) LPH 1.9 3.8 7.6 15.1 37.9
Pressure PSIG 150 150 110 110 80
(max.) BAR 10 10 7 7 5.6
Connections: (S) .50" I.D. X .75" O.D. .38" I.D. X .50" OD (LVB3 & F4 only)
Tubing
(S & D) .50" I.D. X .75" O.D. (LVG4,G5 & H7 only)

Engineering Data
Reproducibility: +/- 2% at maximum capacity
Viscosity Max CPS: 20,000 CPS
Stroke Frequency Max SPM: 125
Stroke Frequency Turn-Down Ratio: 10:1
Stroke Length Turn-Down Ratio: 10:1
Power Input: 115 VAC/50-60 HZ/1 ph
230 VAC/50-60 HZ/1 ph
Average Current Draw:
@ 115 VAC; Amps: 1.0 Amps
@ 230 VAC; Amps: 0.5 Amps @ 230 VAC
Peak Input Power: 300 Watts
Average Input Power @ Max SPM: 130 Watts
 17

PULSAtron Series HV Selection Guide LV _ _ _ _ - ___ _ - ___

MODELS: B3 = 0.50 gph / 12 gpd ( 1.9 lph) max pres.: 150 PSI (10 BAR)
F4 = 1.00 gph / 24 gpd ( 3.8 lph) max pres.: 150 PSI (10 BAR)
G4 = 2.00 gph / 48 gpd ( 7.6 lph) max pres.: 110 PSI (7 BAR)
G5 = 4.00 gph / 96 gpd (15.1 lph) max pres.: 110 PSI (7 BAR)
H7 = 10.0 gph / 240 gpd (37.9 lph) max pres.: 80 PSI (5.6 BAR)

CONTROLS: S = Manual On/Off

M = 4-20mADC Direct, w/ Stop
E = External/Remote Pacing, w/ Stop

ELECTRICAL: A = 115 Volt / 50-60Hz

1 = 115 Volt / 50-60Hz (without agency approvals)
B = 230 Volt / 50-60Hz / 1ph with 6' (1.8m) 3-wire US Plug
2 = 230 Volt / 50-60Hz (without agency approvals)

LIQUID END WTS = PVC / TFE / 316 Stainless Steel - LVH7 only
MATERIALS: VTT = PVC / TFE / TFE - LVB3 & F4 only
Pump Head & VTS = PVC / TFE / 316 Stainless Steel - LVG5 & G4
Fittings/Seats No other liquid end materials available.
& O-rings/Balls

CONNECTION 5 = Tubing (S) .50" I.D. x .75" O.D. / .38" I.D. x .50" O.D. - LVB3 & F4 only
SIZES: K = Tubing .50" I.D. x .75" O.D. - LVG4, G5 & H7 only
No other connection sizes available. Pumps come with 4' suction tubing and 8' discharge tubing. No bleed valve

SUFFIX XXX = No Additional Options

CODES CZXXX = CE Approval (5 digits used for this suffix code)
See pages 9, 10 & 11 for additional information and specs.
A completed model number should look like 'LVB3SA-VTT5-XXX'

Dimensions
Series HV Dimensions (inches)
Model Shipping
No. A B C D Weight
LVB3 5.4 9.3 9.5 7.5 13
LVF4 5.4 10.8 10.8 7.5 18
LVG4 5.4 9.5 10.6 7.5 18
LVG5 5.4 10.8 10.8 7.5 18
LVH7 6.1 11.5 11 8.2 25
NOTE: Inches X 2.54 = cm
18

Electronic Metering Pumps

Series E
Key Features
Manual Control by on-line adjustable stroke rate and stroke length.
Agency approved for demanding OUTDOOR and indoor applications.
Highly Reliable timing circuit.
Water Resistant excellent for OUTDOOR and indoor applications.
Internally Dampened To Reduce Noise, very acceptable for house-
hold installations.
Guided Ball Check Valve Systems, to reduce back flow and enhance
outstanding priming characteristics.
Premium Standard Wetted Component Materials.
Few Moving Parts and Wall Mountable.
Safe & Easy Priming with durable leak-free bleed valve assembly
(standard).

Pressure and Flow Rate Capacity

MODEL LEK2 LE12 LE02 LE33 LE13 LE03 LEK3 LEF4 LE34 LE14 LEH4 LEG4 LE44 LEK5 LEH5 LEH6 LEK7 LEH7 LEJ7 LEH8
Capacity GPH 0.13 0.21 0.25 0.50 0.50 0.50 0.60 0.85 0.90 1.00 1.70 1.75 1.85 2.50 3.15 5.00 8.00 10.00 10.00 25.00
nominal GPD 3 5 6 12 12 12 14 20 22 24 41 42 44 60 76 120 192 240 240 600
(max .) LPH 0.5 0.8 0.9 1.9 1.9 1.9 2.3 3.2 3.4 3.8 6.4 6.6 7 9.5 11.9 18.9 30.3 37.9 37.9 94.6
Pressure PSIG 300 250 150 250 150 100 100 250 150 100 250 150 100 150 150 100 50 35 80 30
(max .) BAR 21 17 10 17 10 7 7 17 10 7 17 10 7 10 10 7 3.3 2.4 5.5 2
Connections Tubing 1/4" ID X 3/8" OD 3/8" ID X 1/2" OD
3/8" ID X 1/2" OD 1/2" ID X 3/4" OD (LPH8 ONLY)
1/4" FNPT 1/4" FNPT
Piping
1/2" FNPT

Engineering Data
Reproducibility: +/- 3% at maximum capacity
Viscosity Max CPS: For viscosity up to 3000 CPS, select connection size 3, 4, B
or C with 316SS ball material. Flow rate will determine
connection/ball size. Greater than 3000 CPS require spring
loaded ball checks. See Selection Guide for proper connec-
tion.
Stroke Frequency Max SPM: 125
Stroke Frequency Turn-Down Ratio: 10:1
Stroke Length Turn-Down Ratio: 10:1
Power Input: 115 VAC/50-60 HZ/1 ph
230 VAC/50-60 HZ/1 ph
Average Current Draw:
@ 115VAC; Amps: 1.0 Amps
@ 230 VAC; Amps: 0.5 Amps
Peak Input Power: 300 Watts
Average Input Power @ Max SPM: 130 Watts
 19

PULSAtron Series E Selection Guide LE_ _ S _ - ___ _ - ___

MODELS: K2 = 0.13 gph / 3 gpd ( 0.5 lph) max pres.: 300 PSI (21 BAR)
12 = 0.21 gph 5 gpd ( 0.8 lph) max pres.: 250 PSI (17 BAR)
33 = 0.50 gph / 12 gpd ( 1.9 lph) max pres.: 250 PSI (17 BAR)
F4 = 0.85 gph / 20 gpd ( 3.2 lph) max pres.: 250 PSI (17 BAR)
H4 = 1.70 gph / 41 gpd ( 6.4 lph) max pres.: 250 PSI (17 BAR)
02 = 0.25 gph / 6 gpd ( 0.9 lph) max pres.: 150 PSI (10 BAR)
13 = 0.50 gph / 12 gpd ( 1.9 lph) max pres.: 150 PSI (10 BAR)
34 = 0.90 gph / 22 gpd ( 3.4 lph) max pres.: 150 PSI (10 BAR)
G4 = 1.75 gph / 42 gpd ( 6.6 lph) max pres.: 150 PSI (10 BAR)
K5 = 2.50 gph / 60 gpd ( 9.5 lph) max pres.: 150 PSI (10 BAR)
H5 = 3.15 gph / 76 gpd (11.9 lph) max pres.: 150 PSI (10 BAR)
03 = 0.50 gph / 12 gpd ( 1.9 lph) max pres.: 100 PSI (7 BAR)
K3 = 0.60 gph / 14 gpd ( 2.3 lph) max pres.: 100 PSI (7 BAR)
14 = 1.00 gph / 24 gpd ( 3.8 lph) max pres.: 100 PSI (7 BAR)
44 = 1.85 gph / 44 gpd ( 7.0 lph) max pres.: 100 PSI (7 BAR)
H6 = 5.00 gph / 120 gpd (18.9 lph) max pres.: 100 PSI (7 BAR)
K7 = 8.00 gph / 192 gpd (30.3 lph) max pres.: 50 PSI (3.3 BAR)
H7 = 10.0 gph / 240 gpd (37.9 lph) max pres.: 35 PSI (2.4 BAR)
J7 = 10.0 gph / 240 gpd (37.9 lph) max pres.: 80 PSI (5.5 BAR)
H8 = 25.0 gph / 600 gpd (94.6 lph) max pres.: 30 PSI (2 BAR)

CONTROLS: S = No Options Available

ELECTRICAL: A = 115 Volt / 50-60Hz

1 = 115 Volt / 50-60Hz (without agency approvals)
B = 230 Volt / 50-60Hz / 1ph with 6' (1.8m) 3-wire US Plug
2 = 230 Volt / 50-60Hz (without agency approvals)

LIQUID END PHC = GFPPL / CSPE / Ceramic

MATERIALS: PTC = GFPPL / TFE / Ceramic
Pump Head & KTC = PVDF / TFE / Ceramic (not available on J7 or H8)
Fittings/Seats VHC = PVC / CSPE / Ceramic (not available on H7, H8, K7)
& O-rings/Balls VTC = PVC / TFE / Ceramic (models <= 150 psi excluding H7, H8, K7)
WTC = PVC / TFE / Ceramic (models > 150 psi and H7, H8, K7)
ATS = 316 S.S. / TFE / 316 S.S. (must use FNPT piping connection) (not available on J7 or H8)
See page 6 for additional liquid end materials.

CONNECTION 1 = Tubing .25" I.D. x .38" O.D. / .25" Ball, 0 - 1.88 GPH
SIZES: 3 = Tubing .38" I.D. x .50" O.D. / .38" Ball, 1.63 - 10 GPH
METRIC:
M = G 1/2 A Threads, .38" Ball, 6.15 - 37.85 LPH
P = 4 x 6mm, .25" Ball, 0 - 3.94 LPH
Please Refer to page 7 for additional connection sizes. All pumps with tubing connections come with the following
items (except for LMH8, LPH8, LEH8, HV series pumps and pumps >150PSI in PVC): 4' Suction, 4' Return, 8' dischage
tubing, footvalve/strainer assy., injection valve and bleed valve.
SUFFIX XXX = No Additional Options
CODES: 130 = PVDF Tubing
500 = Five Function Valve
520 = Five Function Degas Valve
ITS = 15 gal. ITS Tank System (ITS Tank not available on LM, LP, LT, and LE: H4, H5, H6, H7, H8, J7, K7 models)
CZXXX = CE Approval (5 digits used for this suffix code)
See pages 9, 10 & 11 for additional information and specs.
A completed model number should look like 'LE33SA-PTC1-XXX'
Series E Dimensions (inches)
Model Shpg Model Shpg
No. A B B1 C C1 D E Wt No. A B B1 C C1 D E Wt
LE02 5 9.6 - 9.5 - 6.4 8.2 7 LEH4 6.2 10.9 - 11.2 - 8.2 9.5 18
Dimensions LE03 5 9.8 - 9.5 - 6.4 8.4 7 LEH5 6.2 11.3 - 11.2 - 8.2 9.9 18
LE12 5 9.6 - 9.5 - 6.4 8.2 7 LEH6 6.2 11.3 - 11.2 - 8.2 9.9 18
LE13 5 9.8 - 9.5 - 6.4 8.4 7 LEH7 6.1 11.7 - 11.2 - 8.2 10.3 18
LE14 5 9.8 - 9.5 - 6.4 8.4 7 LEH8* 6.1 - 10.9 - 10.6 8.2 - 23
LE33 5.4 10.6 - 11.2 - 7.5 9.2 12 LEK2 5.4 10.3 - 10.8 - 7.5 8.9 10
LE34 5.4 10.6 - 11.2 - 7.5 9.2 12 LEK3 5.4 10.6 - 10.7 - 7.5 9.2 10
LE44 5.4 10.6 - 11.2 - 7.5 9.2 12 LEK5 5.4 10.9 - 11.7 - 7.5 9.5 15
LEF4 5.4 10.6 - 11.7 - 7.5 9.2 15 LEK7 6.1 11.7 - 11.2 - 8.2 10.3 18
LEG4 5.4 10.6 - 11.7 - 7.5 9.2 15 LEJ7 6.1 10.0 - 10.7 - - - 18
NOTE: Inches X 2.54 = cm
* the LEH8 is designed w ithout a bleed v alv e av ailable
20

Electronic Metering Pumps

Series E-DC
Key Features
Powered by 12 Volt DC..
Manual Control by on-line adjustable stroke rate and stroke length.
Agency approved for demanding OUTDOOR and indoor applications.
Highly Reliable timing circuit.
Water Resistant excellent for OUTDOOR and indoor applications.
Internally Dampened To Reduce Noise, very acceptable for house-
hold installations.
Guided Ball Check Valve Systems, to reduce back flow and enhance
outstanding priming characteristics.
Premium Standard Wetted Component Materials.
Few Moving Parts and Wall Mountable.
Safe & Easy Priming with durable leak-free bleed valve assembly
(standard).

Pressure and Flow Rate Capacity

MODEL LS02 LS13 LS14 LS44
Capacity GPH 0.25 0.50 1.00 1.85
nominal GPD 6 12 24 44
(max.) LPH 0.9 1.9 3.8 7.0
Pressure PSIG 150 150 100 100
(max.) BAR 10 10 7 7
Connections: 1/4" ID X 3/8" OD
Tubing
3/8" ID X 1/2" OD
Piping 1/4" FNPT

Engineering Data
Reproducibility: +/- 3% at maximum capacity
Viscosity Max CPS:
LS02, 13: 300 CPS
LS14, 44: 1000 CPS
Stroke Frequency Max SPM: 125
Stroke Frequency Turn-Down Ratio: 10:1
Stroke Length Turn-Down Ratio: 10:1
Power Input: 12.6 VDC Nominal Range 11.8-14.0 VDC
Average Current Draw:
LS02, 13, 14 Amps: 4.0 Amps
LS44 Amps: 8.0 Amps
Peak Input Power:
LS02, 13, 14 Amps: 138.6 Amps
LS44 Amps: 189 Amps
Average Input Power @ Max SPM:
LS02, 13, 14 Amps: 50.4 Amps
LS44 Amps: 100.8 Amps
 21

PULSAtron Series E-DC Selection Guide LS_ _ S 4 - ___ _ - ___

MODELS: 02 = 0.25 gph / 6 gpd (0.9 lph) max pres.: 150 PSI (10 BAR)
13 = 0.50 gph / 12 gpd ( 1.9 lph) max pres.: 150 PSI (10 BAR)
14 = 1.00 gph / 24 gpd ( 3.8 lph) max pres.: 100 PSI (7 BAR)
44 = 1.85 gph / 44 gpd ( 7.0 lph) max pres.: 100 PSI (7 BAR)
CONTROLS: S = No Options Available

ELECTRICAL: 4 = 12V DC

LIQUID END PHC = GFPPL / CSPE / Ceramic

MATERIALS: PTC = GFPPL / TFE / Ceramic
Pump Head & PVC = GFPPL / Viton / Ceramic
Fittings/Seats VTC = PVC / TFE / Ceramic
& O-rings/Balls
See page 6 for additional liquid end materials.

CONNECTION 1 = Tubing .25" I.D. x .38" O.D. / .25" Ball, 0 - 1.88 GPH
SIZES: J = Tubing .25" I.D. x .38" O.D./ 19" Ball, 0 - 1.04 GPH
METRIC:
M = G 1/2 A Threads, .38" Ball, 6.15 - 37.85 LPH
R G 1/2 A Threads, .25" Ball, 0 - 7.10 LPH
Please Refer to page 7 for additional connection sizes. All pumps with tubing connections come with the following
items (except for LMH8, LPH8, LEH8, HV series pumps and pumps >150PSI in PVC): 4' Suction, 4' Return, 8' dischage
tubing, footvalve/strainer assy., injection valve and bleed valve.
SUFFIX XXX = No Additional Options
CODES: 130 = PVDF Tubing
500 = Five Function Valve
520 = Five Function Degas Valve
ITS = 15 gal. ITS Tank System
CZXXX = CE Approval (5 digits used for this suffix code)
See pages 9, 10 & 11 for additional information and specs.
A completed model number should look like 'LS02S4-PTC1-XXX'

Dimensions
Series E-DC Dimensions (inches)
Model Shipping
No. A B C D E Weight
LS02 5.0 9.6 9.6 6.5 8.2 10
LS13 5.0 9.9 9.5 6.5 8.5 10
LS14 5.0 9.9 9.5 6.5 8.5 10
LS44 5.0 10.6 11.4 7.5 9.2 15
NOTE: Inches X 2.54 = cm
22

Electronic Metering Pumps

Series D
Key Features
Completely Digital. The Series D is easy to set-up with
scrolling menus that appear on the easy to read 16 digit LCD
backlit display.
Flow Control Option. Create a flow control system. Pump
will stop if you lose flow.
Hall Effect or Dry Contact water meter input.
Four-button Touch Pad Control with internationally recog-
nized symbols for simplified programming.
Water Resistant excellent for OUTDOOR and indoor appli-
cations.
Internally Dampened To Reduce Noise, very acceptable for
household installations.
Guided Ball Check Valve Systems, to reduce back flow and
enhance outstanding priming characteristics.
Safe & Easy Priming with durable leak-free bleed valve
assembly (standard).

OPTIONS
Add a flow switch to the Se-
ries D to create a Flow Con-
trol System. Available in 3/4”
and 1” for easy installation in
most systems.

Pressure and Flow Rate Capacity

MODEL LF02 LFC3 LF03 LF04 LF64 LFC4
Capacity GPH 0.25 0.42 0.50 1.00 1.25 2.00
nominal GPD 6 10 12 24 30 48
(max.) LPH 0.9 1.6 1.9 3.8 4.7 7.6
Pressure PSIG 150 250 150 100 100 50
(max.) BAR 10 17 10 7 7 3.3
Connections: 1/4" ID X 3/8" OD
Tubing
3/8" ID X 1/2" OD
1/4" FNPT
Piping

Engineering Data
Reproducibility: +/- 3% at maximum capacity
Viscosity Max CPS: 1000 CPS
Status Display: 16-Posiition LCD Dot Matrix Backlight
Stroke Frequency Max SPM: 125
Stroke Frequency Turn-Down Ratio: 100:1
Power Input: 115 VAC/50-60 HZ/1 ph
230 VAC/50-60 HZ/1 ph
Average Current Draw:
@ 115 VAC; Amps: 0.6 Amps
@ 230 VAC; Amps: 0.3 Amps @ 230 VAC
Peak Input Power: 130 Watts
Average Input Power @ Max SPM: 50 Watts
 23

PULSAtron Series D Selection Guide LF_ _ S _ - ___ _ - _ _ - ___

MODELS: C3 = 0.42 gph / 10 gpd (1.6 lph) max pres.: 250 PSI (17 BAR)
02 = 0.25 gph / 6 gpd (0.9 lph) max pres.: 150 PSI (10 BAR)
03 = 0.50 gph / 12 gpd (1.9 lph) max pres.: 150 PSI (10 BAR)
04 = 1.00 gph / 24 gpd (3.8 lph) max pres.: 100 PSI (7 BAR)
64 = 1.25 gph / 30 gpd (4.7 lph) max pres.: 100 PSI (7 BAR)
C4 = 2.00 gph / 48 gpd (7.6 lph) max pres.: 50 PSI (3.3 BAR)

CONTROLS: S = No Options Available

ELECTRICAL: A = 115 Volt / 50-60Hz

1 = 115 Volt / 50-60Hz (without agency approvals)
B = 230 Volt / 50-60Hz / 1ph with 6' (1.8m) 3-wire US Plug
2 = 230 Volt / 50-60Hz (without agency approvals)

LIQUID END PHC = GFPPL / CSPE / Ceramic

MATERIALS: PTC = GFPPL / TFE / Ceramic
Pump Head & PVC = GFPPL / Viton / Ceramic
Fittings/Seats KTC = PVDF / TFE / Ceramic
& O-rings/Balls VHC = PVC / CSPE / Ceramic
VTC = PVC / TFE / Ceramic (models <= 150 psi)
WTC = PVC / TFE / Ceramic (models > 150 psi)
See page 6 for additional liquid end materials.

CONNECTION 1 = Tubing .25" I.D. x .38" O.D. / .25" Ball, 0 - 1.88 GPH
SIZES: 3 = Tubing .38" I.D. x .50" O.D. / .38" Ball, 1.63 - 10 GPH
9 = Degas Head: .25" I.D. x .38" O.D. / 0-1.83 GPH
J = Tubing, .25" I.D. x .38" O.D./ .19 Ball; 0 - 1.04 GPH
METRIC:
R = G 1/2 A Threads, .25" Ball, 0 - 7.10 LPH
Y = 6 x 12mm, .25" Ball, 0 - 7.10 LPH
Please Refer to page 7 for additional connection sizes. All pumps with tubing connections come with the
following items (except for LMH8, LPH8, LEH8, HV series pumps and pumps >150PSI in PVC): 4' Suction, 4'
Return, 8' dischage tubing, footvalve/strainer assy., injection valve and bleed valve.

CONNECTION X = Liquid Tight Connector for Hardwiring Options

ELECTRONIC 1 = Water Tight DIN Connector with Sealing Cap
OPTIONS:
FLOW: X = No Flow
A = Flow Switch 3/4"" with 8.5 ft. cable
B = Flow Switch 3/4"" with 25 ft. cable
C = Flow Switch 1"" with 8.5 ft. cable
D = Flow Switch 1"" with 25 ft. cable
E = 25 ft. - 22g, four conductor cable

SUFFIX XXX = No Additional Options

CODES: 130 = PVDF Tubing
500 = Five Function Valve
520 = Five Function Degas Valve
ITS = 15 gal. ITS Tank System
CZXXX = CE Approval (5 digits used for this suffix code)
See pages 9, 10 & 11 for additional information and specs.
A completed model number should look like 'LF03SA-PTC1-XA-XXX'

Dimensions Series D Dimensions (inches)

Model Shipping
No. A B C D E Weight
LF02 5.0 9.6 9.5 6.5 8.2 10
LFC3 5.0 9.9 9.5 6.5 8.5 10
LF03 5.0 9.9 9.5 6.5 8.5 10
LF04 5.0 9.9 9.5 6.5 8.5 10
LF64 5.0 9.9 9.5 6.5 8.5 10
LFC4 5.0 9.9 9.5 6.5 8.5 10
NOTE: Inches X 2.54 = cm
24

Electronic Metering Pumps

Series A PLUS
Key Features
Manual Control by on-line adjustable stroke rate and stroke length.
Agency approved for demanding OUTDOOR and indoor applications.
Highly Reliable timing circuit.
Water Resistant excellent for OUTDOOR and indoor applications.
Internally Dampened To Reduce Noise, very acceptable for house-
hold installations.
Guided Ball Check Valve Systems, to reduce back flow and enhance
outstanding priming characteristics.
Premium Standard Wetted Component Materials.
Few Moving Parts and Wall Mountable.
Safe & Easy Priming with durable leak-free bleed valve assembly
(standard).
Optional Control: External pace with auto/manual selection.

Pressure and Flow Rate Capacity

MODEL LBC2 LB02 LBC3 LB03 LB04 LB64 LBC4
Capacity GPH 0.25 0.25 0.42 0.50 1.00 1.25 2.00
nominal GPD 6 6 10 12 24 30 48
(max.) LPH 0.9 0.9 1.6 1.9 3.8 4.7 7.6
Pressure PSIG 250 150 250 150 100 100 50
(max.) BAR 17 10 17 10 7 7 3.3
Connections: 1/4" ID X 3/8" OD
Tubing
3/8" ID X 1/2" OD
1/4" FNPT
Piping

Engineering Data
Reproducibility: +/- 3% at maximum capacity
Viscosity Max CPS: 1000 CPS
Stroke Frequency Max SPM: 125
Stroke Frequency Turn-Down Ratio: 10:1
Stroke Length Turn-Down Ratio: 10:1
Power Input: 115 VAC/50-60 HZ/1 ph
230 VAC/50-60 HZ/1 ph
Average Current Draw:
@ 115 VAC; Amps: 0.6 Amps
@ 230 VAC; Amps: 0.3 Amps
Peak Input Power: 130 Watts
Average Input Power @ Max SPM: 50 Watts
 25

PULSAtron Series A Plus Selection Guide LB_ _ _ _ - ___ _ - ___

MODELS: C2 = 0.25 gph / 6 gpd (0.9 lph) max pres.: 250 PSI (17 BAR)
C3 = 0.42 gph / 10 gpd (1.6 lph) max pres.: 250 PSI (17 BAR)
02 = 0.25 gph / 6 gpd (0.9 lph) max pres.: 150 PSI (10 BAR)
03 = 0.50 gph / 12 gpd (1.9 lph) max pres.: 150 PSI (10 BAR)
04 = 1.00 gph / 24 gpd (3.8 lph) max pres.: 100 PSI (7 BAR)
64 = 1.25 gph / 30 gpd (4.7 lph) max pres.: 100 PSI (7 BAR)
C4 = 2.00 gph / 48 gpd (7.6 lph) max pres.: 50 PSI (3.3 BAR)

CONTROLS: S = Manual
E = External Pacing w/ Auto/Manual Switch
G = External Pacing w/ Prime Button
P = Stop Function Option

ELECTRICAL: A = 115 Volt / 50-60Hz

1 = 115 Volt / 50-60Hz (without agency approvals)
B = 230 Volt / 50-60Hz / 1ph with 6' (1.8m) 3-wire US Plug
2 = 230 Volt / 50-60Hz (without agency approvals)

LIQUID END PHC = GFPPL / CSPE / Ceramic

MATERIALS: PTC = GFPPL / TFE / Ceramic
Pump Head & PVC = GFPPL / Viton / Ceramic
Fittings/Seats KTC = PVDF / TFE / Ceramic
& O-rings/Balls VHC = PVC / CSPE / Ceramic
VTC = PVC / TFE / Ceramic (models <= 150 psi)
WTC = PVC / TFE / Ceramic (models > 150 psi)
See page 6 for additional liquid end materials.

CONNECTION 1 = Tubing .25" I.D. x .38" O.D. / .25" Ball, 0 - 1.88 GPH
SIZES: 3 = Tubing .38" I.D. x .50" O.D. / .38" Ball, 1.63 - 10 GPH
9 = Degas Head: .25" I.D. x .38" O.D. / 0-1.83 GPH
J = Tubing, .25" I.D. x .38" O.D./ .19 Ball; 0 - 1.04 GPH
METRIC:
R = G 1/2 A Threads, .25" Ball, 0 - 7.10 LPH
Y = 6 x 12mm, .25" Ball, 0 - 7.10 LPH
Please Refer to page 7 for additional connection sizes. All pumps with tubing connections come with the following
items (except for LMH8, LPH8, LEH8, HV series pumps and pumps >150PSI in PVC): 4' Suction, 4' Return, 8' dischage
tubing, footvalve/strainer assy., injection valve and bleed valve.
SUFFIX XXX = No Additional Options
CODES: 130 = PVDF Tubing
500 = Five Function Valve
520 = Five Function Degas Valve
ITS = 15 gal. ITS Tank System
CZXXX = CE Approval (5 digits used for this suffix code)
See pages 9, 10 & 11 for additional information and specs.
A completed model number should look like 'LB03SA-PTC1-XXX'

Series A PLUS Dimensions (inches)

Dimensions Model Shipping
No. A B C D E Weight
LB02 5.0 9.6 9.5 6.5 8.2 10
LBC2 5.0 9.9 9.5 6.5 8.5 10
LBC3 5.0 9.9 9.5 6.5 8.5 10
LB03 5.0 9.9 9.5 6.5 8.5 10
LB04 5.0 9.9 9.5 6.5 8.5 10
LB64 5.0 9.9 9.5 6.5 8.5 10
LBC4 5.0 9.9 9.5 6.5 8.5 10
NOTE: Inches X 2.54 = cm
26

Electronic Metering Pumps

Series C PLUS
Key Features
Manual Control by on-line adjustable stroke rate and stroke length.
Agency approved for demanding OUTDOOR and indoor applications.
Highly Reliable timing circuit.
Water Resistant excellent for OUTDOOR and indoor applications.
Internally Dampened To Reduce Noise, very acceptable for house-
hold installations.
Guided Ball Check Valve Systems, to reduce back flow and enhance
outstanding priming characteristics.
Premium Standard Wetted Component Materials.
Few Moving Parts and Wall Mountable.
Safe & Easy Priming with durable leak-free bleed valve assembly
(standard).
Optional Control: External pace with auto/manual selection.

Pressure and Flow Rate Capacity

MODEL LD02 LD03 LD04 LD54
Capacity GPH 0.25 0.50 1.00 1.25
nominal GPD 6 12 24 30
(max.) LPH 0.9 1.9 3.8 4.7
Pressure PSIG 80 80 80 80
(max.) BAR 5.6 5.6 5.6 5.6
Connections: 1/4" ID X 3/8" OD
Tubing
3/8" ID X 1/2" OD
1/4" FNPT
Piping

Engineering Data
Reproducibility: +/- 3% at maximum capacity
Viscosity Max CPS: 1000 CPS
Stroke Frequency Max SPM: 125
Stroke Frequency Turn-Down Ratio: 10:1
Stroke Length Turn-Down Ratio: 10:1
Power Input: 115 VAC/50-60 HZ/1 ph
230 VAC/50-60 HZ/1 ph
Average Current Draw:
@ 115 VAC; Amps: 0.6 Amps
@ 230 VAC; Amps: 0.3 Amps @ 230 VAC
Peak Input Power: 130 Watts
Average Input Power @ Max SPM: 50 Watts
 27

PULSAtron Series C Plus Selection Guide LD_ _ _ _ - ___ _ - ___

MODELS: 02 = 0.25 gph / 6 gpd (0.9 lph) max pres.: 80 PSI (5.6 BAR)
03 = 0.50 gph / 12 gpd (1.9 lph) max pres.: 80 PSI (5.6 BAR)
04 = 1.00 gph / 24 gpd (3.8 lph) max pres.: 80 PSI (5.6 BAR)
54 = 1.25 gph / 30 gpd (4.7 lph) max pres.: 80 PSI (5.6 BAR)

CONTROLS: S = Manual
E = External Pacing w/ Auto/Manual Switch
G = External Pacing w/ Prime Button
P = Stop Function Option

ELECTRICAL: A = 115 Volt / 50-60Hz

1 = 115 Volt / 50-60Hz (without agency approvals)
B = 230 Volt / 50-60Hz / 1ph with 6' (1.8m) 3-wire US Plug
2 = 230 Volt / 50-60Hz (without agency approvals)

LIQUID END PHC = GFPPL / CSPE / Ceramic

MATERIALS: PTC = GFPPL / TFE / Ceramic
Pump Head & KTC = PVDF / TFE / Ceramic
Fittings/Seats VHC = PVC / CSPE / Ceramic
& O-rings/Balls VTC = PVC / TFE / Ceramic
See page 6 for additional liquid end materials.

CONNECTION 1 = Tubing .25" I.D. x .38" O.D. / .25" Ball, 0 - 1.88 GPH
SIZES: A = Tubing .38" I.D. x .50" O.D. / .25" Ball, 0 - 1.88 GPH
J = Tubing, .25" I.D. x .38" O.D./ .19 Ball; 0 - 1.04 GPH
METRIC:
R = G 1/2 A Threads, .25" Ball, 0 - 7.10 LPH
Y = 6 x 12mm, .25" Ball, 0 - 7.10 LPH
Please Refer to page 7 for additional connection sizes. All pumps with tubing connections come with the following
items (except for LMH8, LPH8, LEH8, HV series pumps and pumps >150PSI in PVC): 4' Suction, 4' Return, 8' dischage
tubing, footvalve/strainer assy., injection valve and bleed valve.
SUFFIX XXX = No Additional Options
CODES: 130 = PVDF Tubing
500 = Five Function Valve
520 = Five Function Degas Valve
ITS = 15 gal. ITS Tank System
CZXXX = CE Approval (5 digits used for this suffix code)
See pages 9, 10 & 11 for additional information and specs.
A completed model number should look like 'LD03SA-PTC1-XXX'

Dimensions
Series C PLUS Dimensions (inches)
Model Shipping
No. A B C D E Weight
LD02 5.0 9.6 9.5 6.5 8.2 10
LD03 5.0 9.9 9.5 6.5 8.5 10
LD04 5.0 9.9 9.5 6.5 8.5 10
LD54 5.0 9.9 9.5 6.5 8.5 10
NOTE: Inches X 2.54 = cm
28

Electronic Metering Pumps

Series C
Key Features
Automatic Control by external pacing with prime switch (optional).
Manual Control by on-line adjustable stroke length (fixed stroke rate).
Liquid Low Level Option available to prevent loss of prime.
Agency approved for demanding OUTDOOR and indoor applications.
Highly Reliable timing circuit.
Water Resistant excellent for OUTDOOR and indoor applications.
Internally Dampened To Reduce Noise, very acceptable for house-
hold installations.
Guided Ball Check Valve Systems, to reduce back flow and enhance
outstanding priming characteristics.
Premium Standard Wetted Component Materials.
Few Moving Parts and Wall Mountable.
Safe & Easy Priming with durable leak-free bleed valve assembly
(standard).

Pressure and Flow Rate Capacity

MODEL LC02 LC03 LC04 LC54
Capacity GPH 0.25 0.50 1.00 1.25
nominal GPD 6 12 24 30
(max.) LPH 0.9 1.9 3.8 4.7
Pressure PSIG 80 80 80 80
(max.) BAR 5.6 5.6 5.6 5.6
Connections: 1/4" ID X 3/8" OD
Tubing
3/8" ID X 1/2" OD
1/4" FNPT
Piping

Engineering Data
Reproducibility: +/- 3% at maximum capacity
Viscosity Max CPS: 1000 CPS
Stroke Frequency Max SPM: 125
Stroke Length Turn-Down Ratio: 10:1
Power Input: 115 VAC/50-60 HZ/1 ph
230 VAC/50-60 HZ/1 ph
Average Current Draw:
@ 115 VAC; Amps: 0.6 Amps
@ 230 VAC; Amps: 0.3 Amps @ 230 VAC
Peak Input Power: 130 Watts
Average Input Power @ Max SPM: 50 Watts
 29

PULSAtron Series C Selection Guide LC_ _ _ _ - ___ _ - ___

MODELS: 02 = 0.25 gph / 6 gpd (0.9 lph) max pres.: 80 PSI (5.6 BAR)
03 = 0.50 gph / 12 gpd (1.9 lph) max pres.: 80 PSI (5.6 BAR)
04 = 1.00 gph / 24 gpd (3.8 lph) max pres.: 80 PSI (5.6 BAR)
54 = 1.25 gph / 30 gpd (4.7 lph) max pres.: 80 PSI (5.6 BAR)

CONTROLS: S = Manual
E = External Pacing w/ Auto/Manual Switch
G = External Pacing w/ Prime Button
P = Stop Function Option

ELECTRICAL: A = 115 Volt / 50-60Hz

1 = 115 Volt / 50-60Hz (without agency approvals)
B = 230 Volt / 50-60Hz / 1ph with 6' (1.8m) 3-wire US Plug
2 = 230 Volt / 50-60Hz (without agency approvals)

LIQUID END PHC = GFPPL / CSPE / Ceramic

MATERIALS: PTC = GFPPL / TFE / Ceramic
Pump Head & VHC = PVC / CSPE / Ceramic
Fittings/Seats VTC = PVC / TFE / Ceramic
& O-rings/Balls VVC = PVC / Viton / Ceramic
See page 6 for additional liquid end materials.

CONNECTION 1 = Tubing .25" I.D. x .38" O.D. / .25" Ball, 0 - 1.88 GPH
SIZES: A = Tubing .38" I.D. x .50" O.D. / .25" Ball, 0 - 1.88 GPH
J = Tubing, .25" I.D. x .38" O.D./ .19 Ball; 0 - 1.04 GPH
METRIC:
P = 4 x 6mm, .25" Ball, 0 - 3.94 LPH
U = 6 x 10mm, .25" Ball, 0 - 7.10 LPH
Please Refer to page 7 for additional connection sizes. All pumps with tubing connections come with the following
items (except for LMH8, LPH8, LEH8, HV series pumps and pumps >150PSI in PVC): 4' Suction, 4' Return, 8' dischage
tubing, footvalve/strainer assy., injection valve and bleed valve.
SUFFIX XXX = No Additional Options
CODES: 130 = PVDF Tubing
500 = Five Function Valve
520 = Five Function Degas Valve
ITS = 15 gal. ITS Tank System
CZXXX = CE Approval (5 digits used for this suffix code)
See pages 9, 10 & 11 for additional information and specs.
A completed model number should look like 'LC03SA-PTC1-XXX'

Dimensions
Series C Dimensions (inches)
Model Shipping
No. A B C D E Weight
LC02 5.0 9.6 9.5 6.5 8.2 10
LC03 5.0 9.9 9.5 6.5 8.5 10
LC04 5.0 9.9 9.5 6.5 8.5 10
LC54 5.0 9.9 9.5 6.5 8.5 10
NOTE: Inches X 2.54 = cm
30

Electronic Metering Pumps with

Integrated Controller
Series CW
Conductivity Control with Water Meter Feed
The Series CW was designed to control conductivity and feed
inhibitor in an open-air cooling tower. Chemical feed is initiated
and controlled by input from a water meter. The Series CW com-
bines everything you need to control conductivity and feed inhibi-
tor into one unique, compact package to create a simple and
cost effective metering and control system.

Principal of Operation
The Series CW includes a solenoid actuated metering pump,
conductivity sensor, bleed relay and a dry contact input for water
meter control. At set-up, the operator sets the conductivity set
point, differential (or dead-band), the pump stroke frequency and
run time. When conductivity reaches the set point, the system
activates the bleed relay.

As make-up water passes through the water meter, it generates

a series of pulses based on the volume of flow. The pump
counts the pulses until the total reaches the Count set point. The
pump runs at the frequency and run-time specified at set-up and
the count is reset.

Features
120VAC or 250VAC @ 50/60 HZ, 5A max 4 Digit LED, 9 key membrane keypad
4-electrode conductivity input Single-button function keys
0-6000 mS/cm + 1%, temperature compensated Set, Differential, Calibration, Pulse Timer, and Count functions
Relay rated to 5A at 240VAC Stroke rate adjusts 0-100% in 1% increments, turndown ratio 100:1
Isolated dry contact flow switch input
Isolated dry contact water meter input

Pressure and Flow Rate Capacity

MODEL LW02 LW03 LW04 LW64
Capacity GPH 0.25 0.50 1.00 1.25
nominal GPD 6 12 24 30
(max.) LPH 0.9 1.9 3.8 4.7
Pressure PSIG 150 150 100 100
(max.) BAR 10 10 7 7

Engineering Data
Reproducibility: +/- 2% at maximum capacity
Controls: 9 key membrane keypad, Single button function keys
Conductivity Sensor: 4 electrode
Conductivity Range: 0-6000 µS/cm +/- 1%, Temperature Compensated
Input: Isolated Dry Contact Flow Switch
Isolated Dry Contact Water Meter
Functions: Set, Differential, Calibration, and Pulse Timer and
Count Function
Status Display: 4 Digit LED
Stroke Frequency Turn-Down Ratio: 100:1
Stroke Length Turn-Down Ratio: 100:1
Relay Ratings: 5A at 240 VAC
Power Input: 115 VAC/50-60 HZ/1 ph
230 VAC/50-60 HZ/1 ph
5 Amp max
 31

PULSAtron Series CW Selection Guide LW_ _ _ _ - ___ _ - _ _ - ___

MODELS: 02 = 0.25 gph / 6 gpd (0.9 lph) max pres.: 150 PSI (10 BAR)
03 = 0.50 gph / 12 gpd (1.9 lph) max pres.: 150 PSI (10 BAR)
04 = 1.00 gph / 24 gpd (3.8 lph) max pres.: 100 PSI (7 BAR)
64 = 1.25 gph / 30 gpd (4.7 lph) max pres.: 100 PSI (7 BAR)

CONTROLS: R = Rising Set Point (standard)

F = Falling Set Point

ELECTRICAL: A = 115 Volt / 50-60Hz

1 = 115 Volt / 50-60Hz (without agency approvals)
B = 230 Volt / 50-60Hz / 1ph with 6' (1.8m) 3-wire US Plug
2 = 230 Volt / 50-60Hz (without agency approvals)

LIQUID END PHC = GFPPL / CSPE / Ceramic

MATERIALS: PTC = GFPPL / TFE / Ceramic
Pump Head & PVC = GFPPL / Viton / Ceramic
Fittings/Seats KTC = PVDF / TFE / Ceramic
& O-rings/Balls VHC = PVC / CSPE / Ceramic
VTC = PVC / TFE / Ceramic
See page 6 for additional liquid end materials.

CONNECTION 1 = Tubing .25" I.D. x .38" O.D. / .25" Ball, 0 - 1.88 GPH
SIZES: 9 = Degas Head: .25" I.D. x .38" O.D. / 0-1.83 GPH
J = Tubing, .25" I.D. x .38" O.D. / .19 Ball; 0 - 1.04 GPH
METRIC:
R = G 1/2 A Threads, .25" Ball, 0 - 7.10 LPH
Y = 6 x 12mm, .25" Ball, 0 - 7.10 LPH
Please Refer to page 7 for additional connection sizes. All pumps with tubing connections come with the
following items (except for LMH8, LPH8, LEH8, HV series pumps and pumps >150PSI in PVC): 4' Suction, 4'
Return, 8' dischage tubing, footvalve/strainer assy., injection valve and bleed valve.
SENSOR: 2 = Stainless Steel with 8.5 ft. cable
3 = Stainless Steel with 25 ft. cable
4 = Carbon Graphite with 8.5 ft. cable
5 = Carbon Graphite with 25 ft. cable

FLOW: X = No Flow
A = Flow Switch 3/4"" with 8.5 ft. cable and 3"" nipple
B = Flow Switch 3/4"" with 25 ft. cable and 3"" nipple
C = Flow Assembly with 8.5 ft. cable
D = Flow Assembly with 25 ft. cable

SUFFX XXX = No Additional Options

CODES: 130 = PVDF Tubing
500 = Five Function Valve
520 = Five Function Degas Valve
CZXXX = CE Approval (5 digits used for this suffix code)
See pages 9, 10 & 11 for additional information and specs.
A completed model number should look like 'LW03RA-PTC1-2A-XXX'

Dimensions
Series CW Dimensions (inches)
Model Shipping
No. A B C D E Weight (lbs.)
LW02 5.0 9.6 9.5 6.5 8.2 13
LW03 5.0 9.9 9.5 6.5 8.5 13
LW04 5.0 9.9 9.5 6.5 8.5 13
LW64 5.0 9.9 9.5 6.5 8.5 13
NOTE: Inches X 2.54 = cm
32

Electronic Metering Pumps with

Integrated Controller
Series CL
Conductivity Control with Limit Timer
The Series CL was designed to control conductivity and feed inhibitor in an
open-air cooling tower. The Series CL combines everything you need to
control conductivity and feed inhibitor into one unique, compact package to
create a simple and cost effective metering and control system.

Principle of Operation
The Series CL includes a conductivity sensor, bleed relay and a user pro-
grammable limit timer. When conductivity reaches the user specified level,
the system activates the bleed relay and begins pumping inhibitor. The
„feed & bleed „ cycle will continue until the conductivity returns to the de-
sired level. The programmable limit timer allows the user to specify a maxi-
mum pumping time for the feed cycle. If the limit time expires before the
conductivity level returns to the set range, the pump stops feeding while the
bleed continues. Once the conductivity level is reached and the system
stops bleeding, the feed limit timer is automatically reset for the next bleed
cycle.

Features
120VAC or 250VAC @ 50/60 HZ, 5A max
4-electrode conductivity input
0-6000 mS/cm + 1%, temperature compensated
Relay rated to 5A at 240VAC
Isolated dry contact flow switch input
4 Digit LED, 9 key membrane keypad
Single-button function keys
Set, Differential, Calibration, Pulse Timer, and Count functions
Stroke rate adjusts 0-100% in 1% increments, turndown ratio 100:1

Pressure and Flow Rate Capacity

MODEL LL02 LL03 LL04 LL64
Capacity GPH 0.25 0.50 1.00 1.25
nominal GPD 6 12 24 30
(max.) LPH 0.9 1.9 3.8 4.7
Pressure PSIG 150 150 100 100
(max.) BAR 10 10 7 7

Engineering Data
Reproducibility: +/- 2% at maximum capacity
Controls: 9 key membrane keypad, Single button function keys
Conductivity Sensor: 4 electrode
Conductivity Range: 0-6000 µS/cm +/- 1%, Temperature Compensated
Input: Isolated Dry Contact Flow Switch
Functions: Set, Differential, Calibration, and Pulse Timer
Status Display: 4 Digit LED
Stroke Frequency Turn-Down Ratio: 100:1
Stroke Length Turn-Down Ratio: 100:1
Power Input: 115 VAC/50-60 HZ/1 ph
230 VAC/50-60 HZ/1 ph
5 Amp max
 33

PULSAtron Series CL Selection Guide LL_ _ _ _ - ___ _ - _ _ - ___

MODELS: 02 = 0.25 gph / 6 gpd (0.9 lph) max pres.: 150 PSI (10 BAR)
03 = 0.50 gph / 12 gpd (1.9 lph) max pres.: 150 PSI (10 BAR)
04 = 1.00 gph / 24 gpd (3.8 lph) max pres.: 100 PSI (7 BAR)
64 = 1.25 gph / 30 gpd (4.7 lph) max pres.: 100 PSI (7 BAR)

CONTROLS: R = Rising Set Point (standard)

F = Falling Set Point

ELECTRICAL: A = 115 Volt / 50-60Hz

1 = 115 Volt / 50-60Hz (without agency approvals)
B = 230 Volt / 50-60Hz / 1ph with 6' (1.8m) 3-wire US Plug
2 = 230 Volt / 50-60Hz (without agency approvals)

LIQUID END PHC = GFPPL / CSPE / Ceramic

MATERIALS: PTC = GFPPL / TFE / Ceramic
Pump Head & PVC = GFPPL / Viton / Ceramic
Fittings/Seats KTC = PVDF / TFE / Ceramic
& O-rings/Balls VHC = PVC / CSPE / Ceramic
VTC = PVC / TFE / Ceramic
See page 6 for additional liquid end materials.

CONNECTION 1 = Tubing .25" I.D. x .38" O.D. / .25" Ball, 0 - 1.88 GPH
SIZES: 9 = Degas Head: .25" I.D. x .38" O.D. / 0-1.83 GPH
J = Tubing, .25" I.D. x .38" O.D. / .19 Ball; 0 - 1.04 GPH
METRIC:
R = G 1/2 A Threads, .25" Ball, 0 - 7.10 LPH
Y = 6 x 12mm, .25" Ball, 0 - 7.10 LPH
Please Refer to page 7 for additional connection sizes. All pumps with tubing connections come with the
following items (except for LMH8, LPH8, LEH8, HV series pumps and pumps >150PSI in PVC): 4' Suction, 4'
Return, 8' dischage tubing, footvalve/strainer assy., injection valve and bleed valve.
SENSOR: 2 = Stainless Steel with 8.5 ft. cable
3 = Stainless Steel with 25 ft. cable
4 = Carbon Graphite with 8.5 ft. cable
5 = Carbon Graphite with 25 ft. cable

FLOW: X = No Flow
A = Flow Switch 3/4"" with 8.5 ft. cable and 3"" nipple
B = Flow Switch 3/4"" with 25 ft. cable and 3"" nipple
C = Flow Assembly with 8.5 ft. cable
D = Flow Assembly with 25 ft. cable

SUFFX XXX = No Additional Options

CODES: 130 = PVDF Tubing
500 = Five Function Valve
520 = Five Function Degas Valve
CZXXX = CE Approval (5 digits used for this suffix code)
See pages 9, 10 & 11 for additional information and specs.
A completed model number should look like 'LL03RA-PTC1-2A-XXX'

Dimensions Series CL Dimensions (inches)

Model Shipping
No. A B C D E Weight (lbs.)
LL02 5.0 9.6 9.5 6.5 8.2 13
LL03 5.0 9.9 9.5 6.5 8.5 13
LL04 5.0 9.9 9.5 6.5 8.5 13
LL64 5.0 9.9 9.5 6.5 8.5 13
NOTE: Inches X 2.54 = cm
34

Electronic Metering Pumps with

Integrated Controller
Sereis WT
Water Meter Feed & Bleed Control
The Series WT was designed to control the feed and bleed cycle in an open-
air cooling tower. The feed and bleed cycle is initiated and controlled by input
from a water meter. The Series WT combines everything you need to bleed
off the tower and feed inhibitor into one unique, compact package to create a
simple and cost effective metering and control system.

Principal of Operation
The Series WT includes a water meter input with program-
mable pulse timers that control the feed and bleed relays.
When the water level in the cooling tower drops, the make-up water
is turned on creating flow through the water meter. As make-up water
passes through the water meter, it generates a series of pulses based on
the volume of flow.

The Series WT has two pulse counters with independent set points that moni-
tors output of the water meter. One controls the pump and one controls the
bleed relay. When the count exceeds the set point, the counter is reset and
the control function is activated for the run-time specified at set-up.

Features
120VAC or 250VAC @ 50/60 HZ, 5A max
Relay rated to 5A at 240VAC
Isolated dry contact flow switch input
Isolated dry contact water meter input
4 Digit LED, 9 key membrane keypad
Single-button function keys
Pump and bleed timers, pump and bleed counters
Stroke rate adjusts 0-100% in 1% increments, turndown ratio 100:1

Pressure and Flow Rate Capacity

MODEL LQ02 LQ03 LQ04 LQ64
Capacity GPH 0.25 0.50 1.00 1.25
nominal GPD 6 12 24 30
(max.) LPH 0.9 1.9 3.8 4.7
Pressure PSIG 150 150 100 100
(max.) BAR 10 10 7 7

Engineering Data
Reproducibility: +/- 2% at maximum capacity
Controls: 9 key membrane keypad, Single button function keys
Conductivity Sensor: 4 electrode
Conductivity Range: 0-6000 µS/cm +/- 1%, Temperature Compensated
Input: Isolated Dry Contact Flow Switch
Isolated Dry Contact Water Meter
Functions: Pump and Bleed Timers, Pump and Bleed Counters
Status Display: 4 Digit LED
Stroke Frequency Turn-Down Ratio: 100:1
Stroke Length Turn-Down Ratio: 100:1
Relay Ratings: 5A at 240 VAC
Power Input: 115 VAC/50-60 HZ/1 ph
230 VAC/50-60 HZ/1 ph
5 Amp max
 35

PULSAtron Series WT Selection Guide LQ_ _ X _ - ___ _ - X _ - ___

MODELS: 02 = 0.25 gph / 6 gpd (0.9 lph) max pres.: 150 PSI (10 BAR)
03 = 0.50 gph / 12 gpd (1.9 lph) max pres.: 150 PSI (10 BAR)
04 = 1.00 gph / 24 gpd (3.8 lph) max pres.: 100 PSI (7 BAR)
64 = 1.25 gph / 30 gpd (4.7 lph) max pres.: 100 PSI (7 BAR)

CONTROLS: X = No options Available

ELECTRICAL: A = 115 Volt / 50-60Hz

1 = 115 Volt / 50-60Hz (without agency approvals)
B = 230 Volt / 50-60Hz / 1ph with 6' (1.8m) 3-wire US Plug
2 = 230 Volt / 50-60Hz (without agency approvals)

LIQUID END PHC = GFPPL / CSPE / Ceramic

MATERIALS: PTC = GFPPL / TFE / Ceramic
Pump Head & PVC = GFPPL / Viton / Ceramic
Fittings/Seats KTC = PVDF / TFE / Ceramic
& O-rings/Balls VHC = PVC / CSPE / Ceramic
VTC = PVC / TFE / Ceramic
See page 6 for additional liquid end materials.

CONNECTION 1 = Tubing .25" I.D. x .38" O.D. / .25" Ball, 0 - 1.88 GPH
SIZES: 9 = Degas Head: .25" I.D. x .38" O.D. / 0-1.83 GPH
J = Tubing, .25" I.D. x .38" O.D. / .19 Ball; 0 - 1.04 GPH
METRIC:
R = G 1/2 A Threads, .25" Ball, 0 - 7.10 LPH
Y = 6 x 12mm, .25" Ball, 0 - 7.10 LPH
Please Refer to page 7 for additional connection sizes. All pumps with tubing connections come with the
following items (except for LMH8, LPH8, LEH8, HV series pumps and pumps >150PSI in PVC): 4' Suction, 4'
Return, 8' dischage tubing, footvalve/strainer assy., injection valve and bleed valve.
SENSOR: X = No Options Available

FLOW: X = No Flow
A = Flow Switch 3/4"" with 8.5 ft. cable and 3"" nipple
B = Flow Switch 3/4"" with 25 ft. cable and 3"" nipple
C = Flow Assembly with 8.5 ft. cable
E = Flow Assembly with 25 ft. cable

SUFFX XXX = No Additional Options

CODES: 130 = PVDF Tubing
500 = Five Function Valve
520 = Five Function Degas Valve
CZXXX = CE Approval (5 digits used for this suffix code)
See pages 9, 10 & 11 for additional information and specs.
A completed model number should look like 'LQ03XA-PTC1-XA-XXX'

Dimensions
Series WT Dimensions (inches)
Model Shipping
No. A B C D E Weight (lbs.)
LQ02 5.0 9.6 9.5 6.5 8.2 13
LQ03 5.0 9.9 9.5 6.5 8.5 13
LQ04 5.0 9.9 9.5 6.5 8.5 13
LQ64 5.0 9.9 9.5 6.5 8.5 13
Note: Inches x 2.54 = cm
36

Electronic Metering Pumps with

Integrated Controller
Series ET
Feed Control with Water Meter Input
The Series ET was designed to feed chemical in response to a water meter
input. Typical applications include inhibitor feed for an open air-cooling
tower. The Series ET provides everything you need in one unique, com-
pact package to create a simple and cost effective metering system.

Principal of Operation
The Series ET counts pulses from a water meter. When the count exceeds
a set value (either 1 or 10), the pump starts. The pump will continue to run
for an adjustable time period. There are two time ranges – either 2 to 200
seconds or 12 seconds to 20 minutes. The setting is made by selecting a
time base value (200 seconds or 20 minutes) and then setting the time
base percentage from 1 to 100%.
Other control features include a standby mode, continuous „ON‟ mode and
the ability to adjust the stroke length from 0 – 100%.
The pump includes both input and output water meter connections at the
front panel. The output connection provides an isolated dry contact output
of the water meter contact to operate additional pumps or timers off the
same water meter.

Features
Isolated from Earth Ground
120VAC or 250VAC @ 50/60 HZ, 5A max
Isolated Dry Contact (Water Meter)
Isolated Dry Contact (Water Meter)
Mode Select Knob, Stroke Length, Stroke Rate
Standby, On, 200 sec/count, 200 sec/10 count, 20 min/count and 20 min/10 count
Stroke rate and stroke length adjust 0-100% in 1% increments. Frequency turn-
down ratio 100:1.
Agency approved for demanding OUTDOOR and indoor applications

Pressure and Flow Rate Capacity

MODEL LTB2 LTA2 LTB3 LTA3 LTF4 LTD4 LTB4 LTH4 LTG4 LTE4 LTH5 LTH6 LTH7 LTH8
Capacity GPH 0.21 0.25 0.50 0.50 0.85 0.90 1.00 1.70 1.75 1.85 3.15 5.00 10.00 21
nominal GPD 5 6 12 12 20 22 24 41 42 44 76 120 240 504
(max .) LPH 0.8 0.9 1.9 1.9 3.2 3.4 3.8 6.4 6.6 7.0 11.9 18.9 37.9 79.5
Pressure PSIG 250 150 150 100 250 150 100 250 150 100 150 100 35 20
(max .) BAR 17 10 10 7 17 10 7 17 10 7 10 7 2.4 1.3

Engineering Data
Reproducibility: +/- 2% at maximum capacity
Controls: Standby On
200 sec/count 200 sec/10 count
20 min/count 20 min/10 count
Stroke Frequency Turn-Down Ratio: 100:1
Stroke Length Turn-Down Ratio: 100:1
Power Input: 120 VAC/50-60 HZ/1 ph
250 VAC/50-60 HZ/1 ph
5 Amp max
 37

PULSAtron Series ET Selection Guide LT_ _ S _ - ___ _ - ___

MODELS: B2 = 0.21 gph / 5 gpd (0.8 lph) max pres.: 250 PSI (17 BAR)
F4 = 0.85 gph / 20 gpd (3.2 lph) max pres.: 250 PSI (17 BAR)
H4 = 1.70 gph / 41 gpd (6.4 lph) max pres.: 250 PSI (17 BAR)
A2 = 0.25 gph / 6 gpd (0.9 lph) max pres.: 150 PSI (10 BAR)
B3 = 0.50 gph / 12 gpd (1.9 lph) max pres.: 150 PSI (10 BAR)
D4 = 0.90 gph / 22 gpd (3.4 lph) max pres.: 150 PSI (10 BAR)
G4 = 1.75 gph / 42 gpd (6.6 lph) max pres.: 150 PSI (10 BAR)
H5 = 3.15 gph / 76 gpd (11.9 lph) max pres.: 150 PSI (10 BAR)
A3 = 0.50 gph / 12 gpd (1.9 lph) max pres.: 100 PSI (7 BAR)
B4 = 1.00 gph / 24 gpd (3.8 lph) max pres.: 100 PSI (7 BAR)
E4 = 1.85 gph / 44 gpd (7.0 lph) max pres.: 100 PSI (7 BAR)
H6 = 5.00 gph / 120 gpd (18.9 lph) max pres.: 100 PSI (7 BAR)
H7 = 10.0 gph / 240 gpd (37.9 lph) max pres.: 35 PSI (2.4 BAR)
H8 = 21.0 gph / 504 gpd (79.5 lph) max pres.: 20 PSI (1.3 BAR)

CONTROLS: S = Manual On/Off

ELECTRICAL: A = 115 Volt / 50-60Hz

1 = 115 Volt / 50-60Hz (without agency approvals)
B = 230 Volt / 50-60Hz / 1ph with 6' (1.8m) 3-wire US Plug
2 = 230 Volt / 50-60Hz (without agency approvals)

LIQUID END PTC = GFPPL / TFE / Ceramic

MATERIALS: PTT = GFPPL / TFE / TFE
Pump Head & KTC = PVDF / TFE / Ceramic
Fittings/Seats VHC = PVC / CSPE / Ceramic
& O-rings/Balls VTC = PVC / TFE / Ceramic (models <= 150 psi excluding H7, H8, K7)
WTC = PVC / TFE / Ceramic (models > 150 psi and H7, H8, K7)
ATS = 316 S.S. / TFE / 316 S.S. (must use FNPT piping connection)
See page 6 for additional liquid end materials.

CONNECTION 1 = Tubing .25" I.D. x .38" O.D. / .25" Ball, 0 - 1.88 GPH
SIZES: 3 = Tubing .38" I.D. x .50" O.D. / .38" Ball, 1.63 - 10 GPH
4 = Piping .25" FNPT / .38" Ball, 1.63 - 10 GPH
B = Tubing .50" I.D. x .75" O.D. / .50" Ball, 20.83 GPH only
METRIC:
M = G 1/2 A Threads, .38" Ball, 6.15 - 37.85 LPH
R = G 1/2 A Threads, .25" Ball, 0 - 7.10 LPH
Y = 6 x 12mm, .25" Ball, 0 - 7.10 LPH
Please Refer to page 7 for additional connection sizes. All pumps with tubing connections come with the following
items (except for LMH8, LPH8, LEH8, HV series pumps and pumps >150PSI in PVC): 4' Suction, 4' Return, 8' dischage
tubing, footvalve/strainer assy., injection valve and bleed valve.
SUFFIX XXX = No Additional Options
CODES: 130 = PVDF Tubing
500 = Five Function Valve
520 = Five Function Degas Valve
ITS = 15 gal. ITS Tank System (ITS Tank not available on LM, LP, LT, and LE: H4, H5, H6, H7, H8, J7, K7 models)
CZXXX = CE Approval (5 digits used for this suffix code)
See pages 9, 10 & 11 for additional information and specs.
A completed model number should look like 'LTA3SA-PTC1-XXX'

Series ET Dimensions (inches)

Model Shipping
No. A B B1 C C1 D E Weight
LTA2 5.4 10.3 - 10.8 - 7.5 8.9 13
LTA3 5.4 10.6 - 10.7 - 7.5 9.2 13
LTB2 5.4 10.3 - 10.8 - 7.5 8.9 13
LTB3 5.4 10.6 - 10.7 - 7.5 9.2 13
Dimensions LTB4 5.4 10.6 - 10.7 - 7.5 9.2 13
LTD4 5.4 10.6 - 11.2 - 7.5 9.2 15
LTE4 5.4 10.6 - 11.2 - 7.5 9.2 15
LTF4 5.4 10.6 - 11.7 - 7.5 9.2 18
LTG4 5.4 10.6 - 11.7 - 7.5 9.2 18
LTH4 6.1 10.9 - 11.2 - 8.2 9.5 21
LTH5 6.1 11.3 - 11.2 - 8.2 9.9 21
LTH6 6.1 11.3 - 11.2 - 8.2 9.9 21
LTH7 6.1 11.7 - 11.2 - 8.2 10.3 21
LTH8 * 6.1 - 10.9 - 10.6 8.2 - 25
NOTE: Inches X 2.54 = cm
* the LPH8 is designed w ithout a bleed v alv e av ailable
38

Electronic Metering Pumps with

Integrated Controller
Series T7
Feed Control with 7 Day Timer
The Series T7 was designed to feed chemical products on a timed sched-
ule. Typical applications include the feed of biocides in open-air cooling
towers. The feed cycle is initiated and controlled by the programmable
timer. The Series T7 provides everything you need in one unique, compact
package to create a simple and cost effective metering system for timed
applications.

Principal of Operation
The Series T7 is controlled by a 7-day programmable timer. The timer is
programmable in 1-minute increments with up to 8 on/off cycles per day.
Each timed event can be set to run any day of the week on a 7-day cycle.

Other control features include a standby mode, continuous „ON‟ mode and
the ability to adjust the stroke length from 0 – 100%.

Features
Isolated from Earth Ground
120VAC or 250VAC @ 50/60 HZ, 5A max
Mode Select Knob, Stroke Length, Stroke Rate
12, 22, 30 & 44 GPD @ 100 psi – 7 bar
Stroke length adjust 0-100% in 1% increments.Turn down ratio 10:1

Pressure and Flow Rate Capacity

MODEL LC13BA LC14BA LC64BA LC44BA
Capacity GPH 0.50 1.00 1.25 2.00
nominal GPD 12 24 30 48
(max.) LPH 1.9 3.8 4.7 7.6
Pressure PSIG 100 100 100 50
(max.) BAR 7 7 7 3.3

Engineering Data
Reproducibility: +/- 3% at maximum capacity
Stroke Length Turn-Down Ratio: 10:1
Power Input: 115 VAC/50-60 HZ/1 ph
230 VAC/50-60 HZ/1 ph
Average Current Draw:
@ 115 VAC; Amps: 0.6 Amps 7-Day Timer
@ 230 VAC; Amps: 0.3 Amps @ 230 VAC
Solid-state 7-day electronic timer for easy
adjustment of metering schedules and feed
rates. Manual control allows for easy priming
and start-up. The timer is programmable in 1
minute increments, with up to 8 events per
day.
 39

PULSAtron Series T7 Selection Guide LC_ _ B _ - ___ _ - ___

MODELS: 13 = 0.50 gph / 12 gpd (1.9 lph) max pres.: 100 PSI (7 BAR)
14 = 1.00 gph / 24 gpd (3.8 lph) max pres.: 100 PSI (7 BAR)
64 = 1.25 gph / 30 gpd (4.7 lph) max pres.: 100 PSI (7 BAR)
44 = 2.00 gph / 48 gpd (7.6 lph) max pres.: 50 PSI (3.3 BAR)

CONTROLS: B = No Options Available

ELECTRICAL: A = 115 Volt / 50-60Hz

1 = 115 Volt / 50-60Hz (without agency approvals)
B = 230 Volt / 50-60Hz / 1ph with 6' (1.8m) 3-wire US Plug
2 = 230 Volt / 50-60Hz (without agency approvals)

LIQUID END PHC = GFPPL / CSPE / Ceramic

MATERIALS: PTC = GFPPL / TFE / Ceramic
Pump Head & KTC = PVDF / TFE / Ceramic
Fittings/Seats VHC = PVC / CSPE / Ceramic
& O-rings/Balls VTC = PVC / TFE / Ceramic
See page 6 for additional liquid end materials.

CONNECTION 1 = Tubing .25" I.D. x .38" O.D. / .25" Ball, 0 - 1.88 GPH
SIZES: 9 = Degas Head: .25" I.D. x .38" O.D. / 0-1.83 GPH
J = Tubing, .25" I.D. x .38" O.D. / .19 Ball; 0 - 1.04 GPH
METRIC:
Y = 6 x 12mm, .25"" Ball, 0 - 7.10 LPH
T = 6 x 10mm, Degassing (Note: has 10mm suction), 0 - 7.10 LP
Please Refer to page 7 for additional connection sizes. All pumps with tubing connections come with the following
items (except for LMH8, LPH8, LEH8, HV series pumps and pumps >150PSI in PVC): 4' Suction, 4' Return, 8' dischage
tubing, footvalve/strainer assy., injection valve and bleed valve.
SUFFIX XXX = No Additional Options
CODES: 130 = PVDF Tubing
500 = Five Function Valve
520 = Five Function Degas Valve
ITS = 15 gal. ITS Tank System
CZXXX = CE Approval (5 digits used for this suffix code)
See pages 9, 10 & 11 for additional information and specs.
A completed model number should look like 'LC13BA-PTC1-XXX'

Dimensions
Series T7 Dimensions (inches
Shipping
Model No. A B C D E Weight
LC13BA 5.0 9.6 9.5 6.5 8.2 10
LC14BA 5.0 9.9 9.5 6.5 8.5 10
LC64BA 5.0 9.9 9.5 6.5 8.5 10
LC44BA 5.4 10.6 11.3 7.4 9.2 11.8
NOTE: Inches X 2.54 = cm
40

KOPkits

Selecting a KOPkit:
All KOPkit model strings begin with the letter K. The remainder of the string can be determined by knowing your pump
model.

When you select your KOPkit, you will need to build the model number based on the pump model string that you pur-
chased. The two pieces of information you need are the head size and the wet-end code, which is part of the model
string of the pump.

The pump head size is the fourth digit in the pump model number.

LB02SA-PTC1-XXX
The 2 represents your pump head size.

Digits 7-20 in the pump model string represent the wet-end code. It is the group of four digits set apart by the dash
lines.

LB02SA-PTC1-XXX
These four digits represent your wet-end code.

In the following selection guide, you will break down your wet-end code into the four parts to get your total price for the
KOPkit. The four digits in the wet-end code represent the Head Material, Seats & O-Rings, Ball Material and Connec-
tion Type. Using the above example, the code breaks down as follows:

P - Head Material, including fittings. In this example, the P represents GFPPL.

T - Seat & O-Ring Material. In this example, the T represents Teflon.
C - Types of Balls used in the valves. In this example, the C represents Ceramic.
1 - Connection type. In this example, the 1 represents tubing connections for 3/8” OD tubing.

The completed KOPkit number for the above example is:

K2PTC1
Note: If you do not find your connection size in the following selection guide, please consult the factory for accurate
pricing. Our philosophy with the PULSAtron product line is to make it as flexible as our customers need it to be.
 41

PULSAtron KOPkit Selection Guide K_ _ _ _ _

HEAD SIZE 2 =
3 =
The digits 2-8 following the K 4 =
represents the pump head size. 5 =
This is represented by the fourth 6 =
digit in the pump model string. 7 =
8 =

HEAD MATERIALS A =
316 Stainless Steel
K =
PVDF (Kynar)
P =
GFPPL (Polypropylene)
V =
PVC (Poly Vinyl Chloride) (models <= 150 psi
excluding H7, H8, K7)
W = PVC (models > 150 psi and H7, H8, K7)

SEATS/O-RINGS H = CSPE
V = Viton
T = TFE

BALLS T = TFE
C = Ceramic
S = 316 Stainless Steel
H = Alloy C (Hastelloy)

CONNECTION TYPE Type Suction Discharge Spring

1 = Tubing .25" x .38" .25" x .38"
2 = Piping .25" FNPT .25" FNPT
3 = Tubing .38" x .50" .38" x .50"
4 = Piping .25" FNPT .25" FNPT
5 = Tubing .50" x .75" .38" x .50" Yes
6 = Piping .25" FNPT .25" FNPT Yes
7 = Tubing .50" x .75" .50" FNPT Yes
8 = Piping .50" FNPT .50" FNPT Yes
9 = Tubing 25" x .38" .25" x .38" Yes Degas
A = Tubing .38" x .50" .38" x .50"
B = Tubing .50" x .75" .50" x .75"
C = Piping .50" FNPT .50" FNPT
D = Tubing .25" x .38" .25" x .38" Yes
E = Tubing .38" x .50" .38" x .50" Yes
F = Tubing .38" x .50" .38" x .50" Yes
G = Piping .25" FNPT .25" FNPT Yes
I = Piping .50" MNPT .50" MNPT Yes
J = Tubing 25" x .38" .25" x .38"
K = Tubing .50" x .75" .50" x .75" Yes
L = Piping .50" MNPT .50" MNPT
M = Piping G 1/2 A G 1/2 A
N = Tubing 4 x 10 mm 4 x 10 mm
P = Tubing 4 x 6 mm 4 x 6 mm
Q = Tubing 10 x 14 mm 10 x 14 mm
R = Piping G 1/2 A G 1/2 A
S = Tubing 6 x 10 mm 6 x 10 mm
T = Tubing 6 x 10 mm 6 x 10 mm Degas
U = Tubing 6 x 10 mm 6 x 10 mm
V = Tubing 12 x 19 mm 12 x 19 mm
W = Tubing 10 x 16 mm 10 x 16 mm
Y = Tubing 6 x 12 mm 6 x 12 mm
X = Piping .50" MNPT .50" MNPT
42

Suction/Discharge Valves
Suction/Discharge Valve Selection Guide L3_ _ _ _ _ _ - ___
VALVE TYPE: 101 = Suction Valve
201 = Discharge Valve

SEATS: H = CSPE
V = Viton
T = TFE

BALLS: T = TFE
C = Ceramic
S = 316 Stainless Steel
H = Alloy C (Hastelloy)

CONNECTION 1 = Double Balls when TFE seats selected

TYPE: 2 = Double Balls when TFE seats selected
3 = Double Balls when TFE seats selected
4 = Double Balls when TFE seats selected
5 = Available for Discharge Only (L3201)
6 =
7 = Available for Suction Only (L3101)
8 =
A =
B =
C =
D = Spring Loaded with SS Balls
E = Spring Loaded with SS Balls
F = Spring Loaded with SS Balls
G = Spring Loaded with SS Balls
I =
J =
K =
L =
M =
N =
P =
Q =
R =
S =
U =
V =
W =
Y =
X =

MATERIALS OF FPP = Glass Filled Polypropylene

CONSTRUCTION: PVC = Poly Vinyl Chloride
PVD = Kynar
316 = 316 Stainless Steel
 43

LIQUID END COMPONENTS DRIVE END COMPONENTS

Item Item
No. Part No. Description No. Part No. Description
1 L0200200-316 HEAD, PUMP .750 50 L0100200-115 EPM D, E, LE33, 34, 44 115V
1 L0200200-FPP HEAD, PUMP .750 50 L0100200-230 EPM D, E, LE33, 34, 44 230V
1 L0200900-FPP HEAD, PUMP HSA #2 HEAD J .750 50 L0100300-115 EPM F, G, K5 115V
1 L0200900-PVC HEAD, PUMP HSA #2 HEAD J .750 50 L0100300-230 EPM F, G, K5 230V
1 L0200200-PVD HEAD, PUMP HSA #2 HEAD J .750 50 L0100400-115 EPM H7, K7 115V
1 L0200300-316 HEAD, PUMP 1.000 50 L0100400-230 EPM H7, K7 230V
1 L0200300-FPP HEAD, PUMP 1.000 50 L0100500-115 EPM LC, LD54 and LB64 115V
1 L0202500-HPV HEAD, PUMP 1.000 50 L0100500-230 EPM LC, LD54 and LB64 230V
1 L0200300-PVD HEAD, PUMP 1.000 50 L0100600-115 EPM LE 2, 3, 12, 13, 14 115V
1 L0200300-PVC HEAD, PUMP 1.000 50 L0100600-230 EPM LE 2, 3, 12, 13, 14 230V
1 L0201000-FPP HEAD, PUMP HSA #3 HEAD J 1.000 50 L0100200-012 EPM LS44 12VDC
1 L0201000-PVC HEAD, PUMP HSA #3 HEAD J 1.000 50 L0100600-012 EPM LS 2, 13, 14 12VDC
1 L0201000-PVD HEAD, PUMP HSA #3 HEAD J 1.000 51 L0500100-080 HOUSING #3 .080 STRK
1 L0200400-316 HEAD, PUMP 1.250 51 L0501100-040 HOUSING #2 .040 STRK
1 L0200400-FPP HEAD, PUMP 1.250 51 L0501100-080 HOUSING #2 .080 STRK
1 L0200400-PVC HEAD, PUMP 1.250 51 L0500300-040 HOUSING #1 .040 STRK
1 L0200400-PVD HEAD, PUMP 1.250 51 L0500300-080 HOUSING #1 .080 STRK
1 L0200500-SST HEAD, PUMP 1.625 52 L0700101-125 CNTRL BD, A-B-D-E SIZE SLD 115V
1 L0200500-FPP HEAD, PUMP 1.625 52 L0700102-125 CNTRL BD, A-B-D-E SIZE SLD 230V
1 L0200500-PVC HEAD, PUMP 1.625 52 L0700201-125 CNTRL BD, EXT/STOP; A, B, D, E 115V
1 L0200500-PVD HEAD, PUMP 1.625 52 L0700202-125 CNTRL BD, EXT/STOP; A, B, D, E 230V
1 L0200600-SST HEAD, PUMP 2.000 52 L0700401-125 CNTRL BD, 4-20MA/STOP; A, B, D, E 115V
1 L0200600-FPP HEAD, PUMP 2.000 52 L0700402-125 CNTRL BD, 4-20MA/STOP; A, B, D, E 230V
1 L0200600-PVC HEAD, PUMP 2.000 52 L0700501-150 CNTRL BD, F-G SIZE SLD 115V
1 L0200600-PVD HEAD, PUMP 2.000 52 L0700502-150 CNTRL BD, F-G SIZE SLD 230V
1 L0200700-316 HEAD, PUMP 2.500 52 L0700501-200 CNTRL BD, H-K SIZE SLD 115V
1 L0200700-FPP HEAD, PUMP 2.500 52 L0700502-200 CNTRL BD, H-K SIZE SLD 230V
1 L0200700-HPV HEAD, PUMP 2.500 52 L0709401-220 CNTRL BD, LEH8 115V
1 L0200700-PVD HEAD, PUMP 2.500 52 L0709402-220 CNTRL BD, LEH8 230V
1 L0200800-PPL HEAD, PUMP 3.625 52 L0709101-220 CNTRL BD, LVH7, LP/LVH8 115V
1 L0200800-HPV HEAD, PUMP 3.625 52 L0709102-220 CNTRL BD, LVH7, LP/LVH8 230V
2 L0300900-THY DIAPHRAGM .750 52 L0700801-150 CNTRL BD, EXT/STOP; F, G 115V
2 L0301000-THY DIAPHRAGM 1.000 52 L0700802-150 CNTRL BD, EXT/STOP; F, G 230V
2 L0301100-THY DIAPHRAGM 1.250 52 L0700801-200 CNTRL BD EXT/STOP H SIZE SLD 115V
2 L0301200-THY DIAPHRAGM 1.625 52 L0700802-200 CNTRL BD EXT/STOP H SIZE SLD 230V
2 L0301300-THY DIAPHRAGM 2.000 52 L0709301-220 CNTRL BD EXT/STOP LVH7, LP/LVH8 115V
2 L0301400-THY DIAPHRAGM 2.500 52 L0709302-220 CNTRL BD EXT/STOP LVH7, LP/LVH8 230V
2 L0301600-THY DIAPHRAGM 3.625 52 L0700901-150 CNTRL BD, 4-20 MA/STOP; F, G 115V
18 L1501300-HYP SUC/DIS VLV O-RING, HYP 52 L0700902-150 CNTRL BD, 4-20 MA/STOP; F, G 230V
18 L1501300-TFE SUC/DIS VLV O-RING, TFE 52 L0700901-200 CNTRL BD, 4-20 MA/STOP; H 115V
18 L1501300-VTN SUC/DIS VLV O-RING, VTN 52 L0700902-200 CNTRL BD, 4-20MA/STOP; H 230V
24 L1103400-PVC COUPLING NUT 5/16" OD 52 L0709201-220 CNTRL BD, 4-20MA/STP, LVH7, LP/LVH8 115V
24 L1100300-FPP COUPLING NUT 3/8" OD 52 L0709202-220 CNTRL BD, 4-20MA/STP, LVH7, LP/LVH8 230V
24 L1100300-PVC COUPLING NUT 3/8" OD 52 L0701900-150 CNTRL BD, E - DC
24 L1100300-PVD COUPLING NUT 3/8" OD 52 L9906500-000 CNTRL BD, 0, 5 SIZE SING FUNC 115V
24 L1100400-FPP COUPLING NUT 1/2" OD 52 L9906600-000 CNTRL BD, 0, 5 SIZE SING FUNC 230V
24 L1100400-PVC COUPLING NUT 1/2" OD 52 L9906201-000 CNTRL BD, C+, A+ 115V
24 L1100400-PVD COUPLING NUT 1/2" OD 52 L9906202-000 CNTRL BD, C+, A+ 230V
25 L9906700-000 WEIGHT, CERAMIC TUBE 52 L0702701-125 CNTRL BD, LM A, B, C, D, E/K2, 3 115V
36 L1501200-TFE BLEED VLV O-RING, TFE SIGNAL RELAY
60 L1500700-NTR SECONDARY SEAL, O-RING 2-109 52 L0702702-125 CNTRL BD, LM A, B, C, D, E/K2, 3 230V
DRIVE END COMPONENTS SIGNAL RELAY
Item 52 L0702901-125 CNTRL BD, LM A, B, C, D, E/K2, 3 115V
No. Part No. Description POWER RELAY
3 L2100200-FPP DEFLECTION PLATE .750 52 L0702902-125 CNTRL BD, LM A, B, C, D, E/K2, 3 230V
3 L2100300-FPP DEFLECTION PLATE 1.000 POWER RELAY
3 L2100400-FPP DEFLECTION PLATE 1.250 52 L0703801-150 CNTRL BD, LM F, G, K5 115V
3 L2100500-FPP DEFLECTION PLATE 1.625 SIGNAL RELAY
3 L2100600-FPP DEFLECTION PLATE 2.000 52 L0703802-150 CNTRL BD, LM F, G, K5 230V
3 L2100700-FPP DEFLECTION PLATE 2.500 SIGNAL RELAY
4 L0400200-FPP ADAPTER, .750 HSG #2 52 L0703701-150 CNTRL BD, LM F, G, K5 115V
4 L0400300-FPP ADAPTER, 1.000 HSG #2 POWER RELAY
4 L0400400-FPP ADAPTER, 1.250 HSG #2 52 L0703702-150 CNTRL BD, LM F, G, K5 230V
4 L0400500-FPP ADAPTER, 1.625 HSG #2 POWER RELAY
4 L0400600-FPP ADAPTER, 1.250 HSG #3 52 L0702801-190 CNTRL BD, LM H, K7 Signal Relay 115V
4 L0400700-FPP ADAPTER, 1.625 HSG #3 52 L0702802-190 CNTRL BD, LM H, K7 Signal Relay 230V
4 L0400800-FPP ADAPTER, 2.000 HSG #3 52 L0703001-190 CNTRL BD, LM H, K7 115V
4 L0400900-FPP ADAPTER, 2.500 HSG #3 POWER RELAY
4 L0401100-FPP ADAPTER, .750 HSG #1 52 L0703002-190 CNTRL BD, LM H, K7 230V
4 L0401200-FPP ADAPTER, 1.000 HSG #1 POWER RELAY
4 L0401300-FPP ADAPTER, 1.250 HSG #1 52 L0705006-120 CNTRL BD, EXT, C+, A+ 230V
4 L0401400-PPL ADAPTER, 3.625 HSG #3 52 L0705106-120 CNTRL BD, EXT, SERIES C 230V
5 L9901200-BRS SHIM, DIAPHRAGM 52 L0705110-120 CNTRL BD, EXT, C (LC54) 230V
6 L1500400-NTR EPM/ADAPTER O-RING 53 L0601200-000 CNTRL PNL, SERIES MP SIGNAL, H & K7
6 L1500600-NTR EPM/ADAPTER O-RING (ALL H PUMPS) 53 L0601300-000 CNTRL PNL, SERIES MP SIGNAL
7 L9801700-188 #10-32 X 2.62 PAN HEAD, PHILLIPS LP_2-4 53 L0601400-000 CNTRL PNL, SERIES MP POWER
7 L9801800-188 .25-20 X 2.62 PAN HEAD, PHILLIPS LP_5-7 53 L0601500-000 CNTRL PNL, SERIES MP POWER, H & K7
7 L9803400-188 .25-20 X 2.00 PAN HEAD LP_8 53 L0601600-000 CNTRL PNL (ALL H & K7 PUMPS)
7 L9803300-188 #10-32 X 2.00 PAN HEAD 316SS 54 L1600400-000 DUST COVER, CONT PNL HSG #3
8 L9801300-188 #10 REG FLAT WASHER LP_2-4 54 L1600500-000 DUST COVER, CONT PNL HSG #2
8 L9801400-188 .25 REG FLAT WASHER LP_5-8 55 L2000100-040 SHAFT, ADJ FEMALE .040 HSG #2,3
50 L0100100-115 EPM A, B, K2, 3 115V 55 L2000100-080 SHAFT, ADJ FEMALE .080 HSG #2,3
50 L0100100-230 EPM A, B, K2, 3 230V 55 L2000200-040 SHAFT, ADJ FEMALE .040 HSG #1
44

DRIVE END COMPONENTS DRIVE END COMPONENTS

Item Item
No. Part No. Description No. Part No. Description
55 L2000200-080 SHAFT, ADJ FEMALE .080 HSG #1 81 L5003016-115 CNTRL PANEL ASSY, 4-20MA/STOP 115V
56 L2000300-PBT SHAFT, ADJ MALE HSG #2,3 LPK5
56 L2000400-PBT SHAFT, ADJ MALE HSG #1 81 L5003701-115 CNTRL PANEL ASSY, STD 115V
59 L1500100-EPB O-RING, HSG #1/CONT PNL K SIZE SLD
59 L1500300-NTR O-RING, HSG #2/CONT PNL 81 L5003701-230 CNTRL PANEL ASSY, STD 230V
59 L1500500-NTR O-RING, HSG #3/CONT PNL K SIZE SLD
61 L9900600-000 CONNECTOR, LIQUID TIGHT 81 L5003801-115 CNTRL PANEL ASSY, EXT/STOP 115V
61 L9900700-000 CONNECTOR, STRAIN RELIEF K SIZE SLD
62 L9700300-000 CORD, POWER, SERIES C, E 125V 81 L5003801-230 CNTRL PANEL ASSY, EXT/STOP 230V
62 L9700400-000 CORD, POWER, SERIES C, E 230V K SIZE SLD
62 L9701200-000 CORD,POWER, SERIES E PLUS 125V 81 L5003903-115 CNTRL PANEL ASSY, 4-20MA/STOP 115V
62 L9701300-000 CORD,POWER, SERIES E PLUS 230V K7
63 L9700700-250 CIRCUIT BREAKER, SERIES MP 81 L5003903-230 CNTRL PANEL ASSY, 4-20MA/STOP 230V
63 L9707300-000 FUSE 2 AMP, SERIES E, E PLUS K7
63 L9706900-000 BOARD MNTD FUSE, SERIES A+, C+, C, E 81 L5004100-115 CNTRL PANEL ASSY, SIN-FUNC
64 L9800200-188 CNTRL PNL SCREW SIZE 54, 115V SERIES C PLUS
65 L1500800-NTR GROMMET, STROKE LENGTH 81 L5004100-230 CNTRL PANEL ASSY, SIN-FUNC
66 L1900800-000 KNOB, STROKE RATE/SWITCH SIZE 54, 230V SERIES C PLUS
70 L9700500-000 LOCKING TAB 81 L5010800-230 CNTRL PANEL ASSY EXT PACE 230V
71 L1900100-FPP KNOB, STROKE LENGTH SIZE 02, 03, 04, C3, C4 SERIES A+/C+
71 L1900300-FPP KNOB, STROKE LENGTH 81 L5010900-230 CNTRL PANEL ASSY EXT PACE 230V
72 L9800200-188 KNOB MOUNTING SCREW SIZE 54, 64 SERIES A+/C+
76 L1500900-NTR GROMMET STROKE LENGTH 81 L5005200-115 CNTRL PANEL ASSY, 115V
81 L5000801-115 CNTRL PANEL ASSY, SIZE 02, 03, 04, C3, C4 SERIES A+/C+
A-B-D-E SIZE SLDS, 115V 81 L5005300-230 CNTRL PANEL ASSY, 230V
81 L5000801-230 CNTRL PANEL ASSY, SIZE 02, 03, 04, C3, C4 SERIES A+/C+
A-B-D-E SIZE SLDS, 230V 81 L5004800-115 CNTRL PANEL ASSY, 115V
81 L5000901-115 CNTRL PANEL ASSY, EXT/STOP, SIZE 54, 64 SERIES A+/C+
A-B-D-E SIZE SLDS, 115V 81 L5004900-230 CNTRL PANEL ASSY, 230V
81 L5000901-230 CNTRL PANEL ASSY, EXT/STOP, SIZE 54, 64 SERIES A+/C+
A-B-D-E SIZE SLDS, 230V 81 L5007501-115 CNTRL PNL ASSY LMK2 115V
81 L5001001-115 CNTRL PANEL ASSY, 4-20MA/STOP, SIGNAL RELAY
A-B-D-E- SIZE SLDS, 115V 81 L5007301-115 CNTRL PNL ASSY LM A,B,C,D,E,K3 115V
81 L5001001-230 CNTRL PANEL ASSY, 4-20MA/STOP, SIGNAL RELAY
A-B-D-E SIZE SLDS, 230V 81 L5007501-230 CNTRL PNL ASSY LMK2 230V
81 L5000301-230 CNTRL PANEL ASSY, SIGNAL RELAY
F-G SIZE SLDS, 230V 81 L5007301-230 CNTRL PNL ASSY LM A,B,C,D,E,K3 230V
81 L5001301-115 CNTRL PANEL ASSY, H SIZE SLD 115V SIGNAL RELAY
81 L5001301-230 CNTRL PANEL ASSY, H SIZE SLD 230V 81 L5007601-115 CNTRL PNL ASSY LMK2 115V
81 L5028500-115 CNTRL PANEL ASSY, LEH8 115V POWER RELAY
81 L5028500-230 CNTRL PANEL ASSY, LEH8 230V 81 L5007401-115 CNTRL PNL ASSY LM A,B,C,D,E,K3 115V
81 L5028201-115 CNTRL PANEL ASSY, LVH7, LP/LVH8 115V POWER RELAY
81 L5028200-230 CNTRL PANEL ASSY, LVH7, LP/LVH8 230V 81 L5007601-230 CNTRL PNL ASSY LMK2 230V
81 L5001401-115 CNTRL PANEL ASSY, EXT/STOP, POWER RELAY
H SIZE SLD, 115V 81 L5007401-230 CNTRL PNL ASSY LM A,B,C,D,E,K3 230V
81 L5001401-230 CNTRL PANEL ASSY, EXT/STOP, POWER RELAY
H SIZE SLD, 230V 81 L5007701-115 CNTRL PNL ASSY LMK5 115V
81 L5028301-115 CNTRL PANEL ASSY, EXT/STOP, 115V SIGNAL RELAY
LVH7, LP/LVH8 81 L5007101-115 CNTRL PNL ASSY LM F, G 115V
81 L5028300-230 CNTRL PANEL ASSY, EXT/STOP, 230V SIGNAL RELAY
LVH7, LP/LVH8 81 L5007701-230 CNTRL PNL ASSY LMK5 230V
81 L5001501-115 CNTRL PANEL ASSY, 4-20MA/STOP, SIGNAL RELAY
H SIZE SLD, 115V 81 L5007101-230 CNTRL PNL ASSY LM F, G 230V
81 L5001501-230 CNTRL PANEL ASSY, 4-20MA/STOP, SIGNAL RELAY
H SIZE SLD, 230V 81 L5007801-115 CNTRL PNL ASSY LMK5 115V
81 L5028401-115 CNTRL PANEL ASSY, 4-20MA/STOP, POWER RELAY
LVH7, LP/LVH8 115V 81 L5007201-115 CNTRL PNL ASSY LM F, G 115V
81 L5028401-230 CNTRL PANEL ASSY, 4-20MA/STOP, POWER RELAY
LVH7, LP/LVH8 230V 81 L5007801-230 CNTRL PNL ASSY LMK5 230V
81 L5000100-012 CNTRL PANEL ASSY, E-DC POWER RELAY
SIZE 01, 13, 14 81 L5007201-230 CNTRL PNL ASSY LM F, G 230V
81 L5000200-012 CNTRL PANEL ASSY, E-DC SIZE 44 POWER RELAY
81 L5000100-115 CNTRL PANEL ASSY, SERIES E 115V 81 L5007901-115 CNTRL PNL ASSY LMK7 115V
0-1/SIZE SLD SIGNAL RELAY
81 L5000100-230 CNTRL PANEL ASSY, SERIES E 230V 81 L5006901-115 CNTRL PNL ASSY LM H 115V
0-1/SIZE SLD SIGNAL RELAY
81 L5000200-115 CNTRL PANEL ASSY, 3-4 SIZE SLDS 115V 81 L5007901-230 CNTRL PNL ASSY LMK7 230V
81 L5000200-230 CNTRL PANEL ASSY, 3-4 ZISE SLDS 230V SIGNAL RELAY
81 L5002900-115 CNTRL PANEL ASSY SIN-FUNC 81 L5006901-230 CNTRL PNL ASSY LM H 230V
0-SIZE SLD, 115V SERIES C SIGNAL RELAY
81 L5002900-230 CNTRL PANEL ASSY SIN-FUNC 81 L5008001-115 CNTRL PNL ASSY LMK7 115V
0-SIZE SLD, 230V SERIES C POWER RELAY
81 L5003000-115 CNTRL PANEL ASSY SIN-FUNC 81 L5007001-115 CNTRL PNL ASSY H 115V
5-SIZE SLD, 115V SERIES C POWER RELAY
81 L5003000-230 CNTRL PANEL ASSY SIN-FUNC 81 L5008001-230 CNTRL PNL ASSY LMK7 230V
5-SIZE SLD, 230V SERIES C POWER RELAY
81 L5011000-115 CNTRL PANEL ASSY EXT PACE 115V 81 L5007001-230 CNTRL PNL ASSY H 230V
SIZE 54, SERIES C POWER RELAY
81 L5013000-115 CNTRL PANEL ASSY EXT PACE 115V 88 L9804000-000 GROUND LUG NUT
SIZE 54, SERIES C 89 L9800500-STL GROUND LUG BOLT
81 L5003014-115 CNTRL PANEL ASSY, EXT/STOP 115V 92 L9700800-000 BREAKER COVER
K5 L9700200-000 CORD, SIGNAL, 10 FT
81 L5003015-115 CNTRL PANEL ASSY, 4-20MA/STOP 115V L9700201-000 CORD, SIGNAL, 20 FT
K2 L9700800-000 PROTECTIVE BOOT, CKT BRKER
 45

BLEED VALVE ASSEMBLIES INJECTION BACK PRESS VALVE ASSEMBLIES

Item Item
No. Part No. Description OD No. Part No. Description ID X OD
11 L3300H01-FPP FPP/HYP 3/8" 13 J41767 FPP/HYP/C 3/8" X 1/2"
11 L3300H01-PVC PVC/HYP 3/8" 13 J41863 FPP/HYP/316 3/8" X 1/2"
11 L3300H03-FPP FPP/HYP 1/2" 13 J41773 FPP/HYP/TFE 3/8" X 1/2"
11 L3300H03-PVC PVC/HYP 1/2" 13 41716 FPP/VTN/C 3/8" X 1/2"
11 L3300T01-FPP FPP/TFE 3/8" 13 J41882 FPP/VTN/316 3/8" X 1/2"
11 L3300T01-PVC PVC/TFE 3/8" 13 J41775 FPP/VTN/TFE 3/8" X 1/2"
11 L3300T01-PVD PVD/TFE 3/8" 13 J41872 FPP/FTF/C 3/8" X 1/2"
11 L3300T03-FPP FPP/TFE 1/2" 13 J41879 FPP/FTF/316 3/8" X 1/2"
11 L3300T03-PVC PVC/TFE 1/2" 13 J41875 FPP/FTF/TFE 3/8" X 1/2"
11 L3300T03-PVD PVD/TFE 1/2" 13 J41694 PVC/HYP/C 3/8" X 1/2"
11 L3300V01-FPP FPP/VTN 3/8" 13 41698 PVC/HYP/C 6" 3/8" X 1/2"
11 L3300V01-PVC PVC/VTN 3/8" 13 41702 PP/VTN/C 6" 3/8" X 1/2"
11 L3300V01-PVD PVD/VTN 3/8" 13 J41865 PVC/HYP/316 3/8" X 1/2"
11 L3300V03-FPP FPP/VTN 1/2" 13 J41759 PVC/HYP/TFE 3/8" X 1/2"
11 L3300V03-PVC PVC/VTN 1/2" 13 J41714 PVC/VTN/C 3/8" X 1/2"
11 L3300V03-PVD PVD/VTN 1/2" 13 J41095 PVC/VTN/316 3/8" X 1/2"
FOOT VALVE / STRAINER ASSEMBLIES 13 J41761 PVC/VTN/TFE 3/8" X 1/2"
Item 13 J41873 PVC/FTF/C 3/8" X 1/2"
No. Part No. Description ID X OD 13 J41881 PVC/FTF/316 3/8" X 1/2"
12 J40117 FPP/HYP/C 3/8" X 1/2" 13 J41877 PVC/FTF/TFE 3/8" X 1/2"
12 J40203 FPP/HYP/316 3/8" X 1/2" 13 J61073 PVD/FTF/TFE 3/8" X 1/2"
12 J40123 FPP/HYP/TFE 3/8" X 1/2" 13 J61021 PVD/FTF/C 3/8" X 1/2"
12 J60509 FPP/VTN/C 3/8" X 1/2" 13 J41766 FPP/HYP/C 1/4" X 3/8"
12 J40141 FPP/VTN/316 3/8" X 1/2" 13 J41862 FPP/HYP/316 1/4" X 3/8"
12 J40125 FPP/VTN/TFE 3/8" X 1/2" 13 J41772 FPP/HYP/TFE 1/4" X 3/8"
12 J40212 FPP/FTF/C 3/8" X 1/2" 13 41715 FPP/VTN/C 1/4" X 3/8"
12 J40175 FPP/FTF/316 3/8" X 1/2" 13 41701 FPP/VTN/C 6" 1/4" X 3/8"
12 J40171 FPP/FTF/TFE 3/8" X 1/2" 13 J41866 FPP/VTN/316 1/4" X 3/8"
12 J60728 PVD/FTF/C 3/8" X 1/2" 13 J41774 FPP/VTN/TFE 1/4" X 3/8"
12 J60729 PVD/HYP/C 3/8" X 1/2" 13 J61098 FPP/FTF/C 1/4" X 3/8"
12 J60730 PVD/VTN/C 3/8" X 1/2" 13 J41878 FPP/FTF/316 1/4" X 3/8"
12 J40116 FPP/HYP/C 1/4" X 3/8" 13 J41874 FPP/FTF/TFE 1/4" X 3/8"
12 J40156 FPP/HYP/316 1/4" X 3/8" 13 41693 PVC/HYP/C 1/4" X 3/8"
12 J40122 FPP/HYP/TFE 1/4" X 3/8" 13 41705 PVC/HYP/C 6" 1/4" X 3/8"
12 J60524 FPP/VTN/C 1/4" X 3/8" 13 J41864 PVC/HYP/316 1/4" X 3/8"
12 J40158 FPP/VTN/316 1/4" X 3/8" 13 J41758 PVC/HYP/TFE 1/4" X 3/8"
12 J40124 FPP/VTN/TFE 1/4" X 3/8" 13 J61237 PVC/VTN/C 1/4" X 3/8"
12 J40211 FPP/FTF/C 1/4" X 3/8" 13 J41867 PVC/VTN/316 1/4" X 3/8"
12 J40170 FPP/FTF/316 1/4" X 3/8" 13 41760 PVC/VTN/TFE 1/4" X 3/8"
12 J40169 FPP/FTF/TFE 1/4" X 3/8" 13 J41996 PVC/FTF/C 1/4" X 3/8"
12 J60716 PVD/FTF/C 1/4" X 3/8" 13 J41880 PVC/FTF/316 1/4" X 3/8"
12 J60717 PVD/HYP/C 1/4" X 3/8" 13 J41876 PVC/FTF/TFE 1/4" X 3/8"
12 J60718 PVD/VTN/C 1/4" X 3/8" 13 J61020 PVD/FTF/C 1/4" X 3/8"
12 J40095 316 .25 NPT 13 J61026 PVD/FTF/TFE 1/4" X 3/8"
12 J40195 FPP/HYP/C .25 NPT 13 J41911 FPP/HYP/C .25 NPT
12 J40187 FPP/VTN/C .25 NPT 13 J41901 FPP/VTN/C .25 NPT
12 J40179 FPP/FTF/C .25 NPT 13 J41944 FPP/FTF/C .25 NPT
12 J60503 FPP .50 NPT 13 J41904 PVC/HYP/C .25 NPT
12 J60561 FPP 1/2 X 3/4" 13 J41858 PVC/VTN/C .25 NPT
12 J60564 FPP/FTF/C 3/16 X 5/16" 13 J41908 PVC/FTF/C .25 NPT
12 J60712 PVD/FTF/C 3/16 X 5/16" 13 J61015 PVD/FTF/C .25 NPT
STAINLESS STEEL VALVE REPAIR KITS 13 J61025 316/FTF/316 .25 NPT
13 J41969 PVC/HYP/C 1/2 X 3/4"
Part No. Description 13 J61149-10P FPP/FTF/C 1/2 X 3/4"
L9904200-316 VALVE REPAIR KIT - ATS2 13 J61152-10P FPP/HYP/C 1/2 X 3/4"
L9904600-316 VALVE REPAIR KIT - ATS4 13 J61160-10P FPP/FTF/C .50 NPT
L9904700-316 VALVE REPAIR KIT - ATS6 13 J61157-10P PVC/FTF/C .50 NPT
L9904800-316 VALVE REPAIR KIT - ATS8 13 J61156-10P PVC/TFE/S .50 NPT
L9904900-316 VALVE REPAIR KIT - ATSG OTHER
TUBING
Part No. Description
Part No. Description 26858 BULKHEAD FITTING - PP 1/2"
00007 SUCT, 3/8 OD, CLEAR PVC FT 26859 BULKHEAD FITTING - PVC 1/2"
00008 DISCH, 1/2 OD, WHITE PE FT 26860 BULKHEAD FITTING - PVC 3/8"
00009 DISCH, 1/2 OD, BLACK PE FT 26867 BULKHEAD FITTING - PP 3/8"
00010 DISCH, 3/8 OD, WHITE PE FT L9905000-FPP J CONVERSION KIT (FPP/TFE/C)
00011 DISCH, 3/8 OD, BLACK PE FT L9905000-PVC J CONVERSION KIT (PVC/TFE/C)
J00012 DISCH, 1/2 OD, HI PRES, WHITE FT L9905100-FPP J CONVERSION KIT (FPP/TFE/C)
00013 DISCH, 1/2 OD, HI PRES, BLACK FT L9905100-PVC J CONVERSION KIT (PVC/TFE/C)
J00022 DISCH, 3/8 OD, HI PRES, WHITE FT L9905100-PVD J CONVERSION KIT (PVD/TFE/C)
J00023 SUCT, 1/2 OD, CLEAR PVC FT L9906901-000 CONV. KIT (.75" VVC9) DEGAS HEAD
J00024 DISCH, 3/8 OD, HI PRES, BLACK FT L9907001-000 CONV. KIT (1.00" VVC9) DEGAS HEAD
J00032 SUCT/DISCH, 3/4 OD, CLEAR PVC FT L9907101-000 CONV. KIT (1.25" VVC9) DEGAS HEAD
L9902900-000 PVDF TUBING, 3/8 OD FT
L9903000-000 PVDF TUBING, 1/2 OD FT
L9904300-PEB SUCT, 5/16 OD, PE BLACK FT
L9904300-PEW SUCT, 5/16 OD, PE WHITE FT
L9904300-PVC SUCT, 5/16 OD, CLEAR PVC FT
L9904300-PVD SUCT, 5/16 OD, PVDF WHITE FT
L9904500-PEW DISCH, 1/2 X 5/8, PE WHITE FT
L9913200-BRD PVC CLEAR BRAIDED, 3/4 OD FT
46

Mechanical Diaphragm Pumps

OMNI mechanical metering pumps and controllers are the economical standard for a reliable chemical feed pump with virtually no
maintenance. For high technology in a simple to understand package an an economical price, add an MPC (metering pump control-
ler) to the OMNI pump to take advantage of complete system integration between metering pump and process. The OMNI offers
the following user friendly benefits

Long Life - DC2—DC6 are greased for life, DC7 is oil lubricated.
Compact and Lightweight - Saves space and easy handling.
Controller Ready - Add an MPC when automatic pump control is
required.
Simple Design - Easy to install and operate.
Highly Efficient - Quiet and cool, standard fan cooled motor design.
Guided Ball Check Valve Systems, to reduce back flow and en-
hance outstanding priming characteristics.
Premium Standard Wetted Component Materials.
Few Moving Parts and Wall Mountable.
Liquid End Materials– PP, PVDF & 316 SS

MPC NO MOTOR OPTION

Minimal MPC Motor Requirements:
HP/KW Defined on order (Pump Dependent)
Voltage 230V nominal
Base Freq 50 or 60Hz (by Mfgr's Motor design)
Type TEFC
Phases 3 phase
Poles 4 poles, 1500 rpm (50 hz) or 1,800 rpm (60hz) synchronous speed
SF >=1.05
Turn Down Minimum 3:1 constant torque
Insulation Class F or better
Inverter Duty Not Required

Performance & Selection Table

MODEL DC2A DC2B DC2C DC3B DC3C DC4B DC4C DC4D DC5C DC5D DC6C DC6D
Capacity GPH 7 13.9 24 32.3 55.5 40.6 61.8 78.9¹ 104.6 137.9 218.7 272.6¹
60 hz & MPC LPH 26.4 52.8 90.8 122.4 210 153.6 234 298.8¹ 396 522¹ 828 1032¹
Capacity GPH 5.8 11.6 20 26.9 46.2 33.8 51.5 65.8 87.2 114.9 182.3 227.2
50 hz LPH 22 44 75.7 102 175 128 195 249 330 435 690 860
Pressure PSIG 150 75 150 90 45
(max.) BAR 10.3 5.1 10.3 6.2 3.1
1725 44 88 150 88 150 117 175 223 1 175 223 1 175 223 1
SPM @
1425 37 73 125 73 125 97 145 186 146 186 146 186
HP/kW Required 0.25 / 0.18 0.50 / 0.37
Connection Size 1/4" (F)NPT 1/2" (F)NPT OR (F)BSPT 1" (F)NPT OR (F)BSPT
1
This selection uses a high stroking rate, use with caution.
Must have at least 25 psig discharge pressure and water-like viscosity.
 47

OMNI DC2 thru DC6 Selection Guide DC_ _ _ _ _ - _ _ _ _

MODELS: 2A = PVDF - 7.0 GPH (26.4 LPH)@60Hz & MPC or 5.8 GPH (22.0 LPH)@50Hz
2A = 316SS - 7.0 GPH (26.4 LPH)@60Hz & MPC or 5.8 GPH (22.0 LPH)@50Hz
2B = PVDF - 13.9 GPH (52.8 LPH)@60Hz & MPC or 11.6 GPH (44.0 LPH)@50Hz
2B = 316SS - 13.9 GPH (52.8 LPH)@60Hz & MPC or 11.6 GPH (44.0 LPH)@50Hz
2C = PVDF - 24.0 GPH (90.8 LPH)@60Hz & MPC or 20 GPH (75.7 LPH)@50Hz
2C = 316SS - 24.0 GPH (90.8 LPH)@60Hz & MPC or 20 GPH (75.7 LPH)@50Hz
3B = PVDF - 32.3 GPH (122.4 LPH)@60Hz & MPC or 26.9 GPH (102.0 LPH)@50Hz
3B = 316SS - 32.3 GPH (122.4 LPH)@60Hz & MPC or 26.9 GPH (102.0 LPH)@50Hz
3C = PVDF - 55.5 GPH (210 LPH)@60Hz & MPC or 46.2 GPH (175.0 LPH)@50Hz
3C = 316SS - 55.5 GPH (210 LPH)@60Hz & MPC or 46.2 GPH (175.0 LPH)@50Hz
4B = PVDF - 40.6 GPH (153.6 LPH)@60Hz & MPC or 33.8 GPH (128.0 LPH)@50Hz
4B = 316SS - 40.6 GPH (153.6 LPH)@60Hz & MPC or 33.8 GPH (128.0 LPH)@50Hz
4C = PVDF - 61.8 GPH (234 LPH)@60Hz & MPC or 51.5 GPH (195.0 LPH)@50Hz
4C = 316SS - 61.8 GPH (234 LPH)@60Hz & MPC or 51.5 GPH (195.0 LPH)@50Hz
4D = PVDF - 78.91GPH (298.81 LPH)@60Hz & MPC or 65.8 GPH (249.0 LPH)@50Hz
4D = 316SS - 78.91 GPH (298.81 LPH)@60Hz & MPC or 65.8 GPH (249.0 LPH)@50Hz
5C = PP - 104.6 GPH (396 LPH)@60Hz & MPC or 87.2 GPH (330.0 LPH)@50Hz
5C = PVDF - 104.6 GPH (396 LPH)@60Hz & MPC or 87.2 GPH (330.0 LPH)@50Hz
5C = 316SS - 104.6 GPH (396 LPH)@60Hz & MPC or 87.2 GPH (330.0 LPH)@50Hz
5D = PP - 137.91 GPH (5221 LPH)@60Hz & MPC or 114.9 GPH (435.0 LPH)@50Hz
5D = PVDF - 137.91 GPH (5221 LPH)@60Hz & MPC or 114.9 GPH (435.0 LPH)@50Hz
5D = 316SS - 137.91 GPH (5221 LPH)@60Hz & MPC or 114.9 GPH (435.0 LPH)@50Hz
6C = PP - 218.7 GPH (828 LPH)@60Hz & MPC or 182.3 GPH (690.0 LPH)@50Hz
6C = PVDF 2 - 218.7 GPH (828 LPH)@60Hz & MPC or 182.3 GPH (690.0 LPH)@50Hz
6C = 316SS - 218.7 GPH (828 LPH)@60Hz & MPC or 182.3 GPH (690.0 LPH)@50Hz
6D = PP - 272.61 GPH (10321 LPH)@60Hz & MPC or 227.2 GPH (860.0 LPH)@50Hz
6D = PVDF 2 - 272.61 GPH (10321 LPH)@60Hz & MPC or 227.2 GPH (860.0 LPH)@50Hz
6D = 316SS - 272.61 GPH (10321 LPH)@60Hz & MPC or 227.2 GPH (860.0 LPH)@50Hz
1
Caution: This pump has a high stroke rate & needs at least 25 psig back pressure and water-like viscosity.
2
These pumps are subject to export restrictions
MOTOR: 1 = IEC 71 B14 Frame, 1PH 115/230V, 0.37kW (1/2HP), TEFC, Motor [50/60hz]*
2 = 56C Frame, 1PH 115/230V, 0.37kW (1/2HP), TEFC, MOTOR (60hz)
3 = IEC 71 B14 Frame, 3PH 220/380V (&460V), 0.37kW (1/2HP), TEFC, Motor [50/60hz]*
4 = 56C Frame, 3PH 220/380V (&460V), 0.37kW (1/2HP), TEFC, MOTOR (60hz)
5 = MPC with 56C frame motor - price included in MPC price
6 = MPC NO MOTOR with 56C frame [Always @ 60 hz!] (price subtracted from MPC)
7 = MPC with 71 frame motor - price included in MPC price
8 = MPC NO MOTOR with 71 frame [Always @ 60 hz!] (price subtracted from MPC)
X = NO MOTOR - 56C frame
Y = NO MOTOR - IEC 71 B14 frame
* In the Americas, lead time is 8 weeks for any pump with these motors.

WET END P = PP Liqud End - PTFE Diaphragm and PTFE O-rings - Ceramic Ball Valves *
MATERIALS: F = PVDF Liqud End - PTFE Diaphragm and PTFE O-rings - Ceramic Ball Valve
A = 316SS Liquid End - PTFE Diaphragm and PTFE O-rings - 316SS Ball Valves
* Model DC5 have PVC reagent heads with PP valves.

CONNECTION P = NPT
TYPE B = Din ISO 228/1 (BSPT) (Not available on DC2 pumps)
Optional MPC Controller
CONTROL: BLANK = No MPC Controller
M = MPC Controller

CONTROLLER BLANK = NO MPC CONTROLLER

INPUT 1 = 110-115V 50/60Hz ETL (UL & CSA) - Single Phase Only
VOLTAGE 2 = 220-230V 50/60Hz CE & ETL (UL & CSA) - Single Phase Only
Contact factory for additional motor options. MPC output is 60Hz even if the input voltage is 50Hz - Select pump based on 60Hz
performance.

EXTENDED BLANK = NO MPC CONTROLLER

REMOTE X = PUMP MOUNTED KEYPAD with standard 1.5m (4.5 feet) of cable
CABLE: C = EXTENDED REMOTE CABLE, KEYPAD MOUNTED OFF THE PUMP *
NOTE: * The MPC remote can be located up to 1000 feet (305m) away from the pump. Order extra cable by adding the line item part number
NP530147-000 per foot to the order. Will be shipped loose as a line item for field installation. Example: If
62 ft of cable is needed, order 62 pieces of NP530147-000. MPC - PANEL MOUNT: The MPC remote is already a NEMA 4X (IP56) rated
Instead of integrating this into a control panel, we suggest mounting the remote ""as is"" on the outside of a panel or next to a panel on the
wall. The bracket for wall or panel mounting is the same bracket that comes as standard on the pump. There is no chassis mount available.

LANGUAGE BLANK = NO MPC CONTROLLER

(MPC will be E = English
shipped in F = French
language S = Spanish
chosen) G = German
48

Mechanical Diaphragm Pumps

OMNI DC7 Series Selection Guide DC7_ _ _ _
MODELS 7C = PP - 412 GPH (1560 LPH)@60Hz & MPC or 343.4 GPH (1300 LPH)@50Hz
7C = PVDF 2 - 412 GPH (1560 LPH)@60Hz & MPC or 343.4 GPH (1300 LPH)@50Hz
7D = PP - 5071 GPH (19201 LPH)@60Hz & MPC or 423 GPH (1600 LPH)@50Hz
7D = PVDF 2 - 5071 GPH (19201 LPH)@60Hz & MPC or 423 GPH (1600 LPH)@50Hz
Duplex Models
7J = PP - 824 GPH (3120 LPH)@60Hz & MPC or 687 GPH (2600 LPH)@50Hz
7J = PVDF 2 - 824 GPH (3120 LPH)@60Hz & MPC or 687 GPH (2600 LPH)@50Hz
7K = PP - 10141 GPH (38401 LPH)@60Hz & MPC or 845 GPH (3200 LPH)@50Hz
7K = PVDF 2 - 10141 GPH (38401 LPH)@60Hz & MPC or 845 GPH (3200 LPH)@50Hz
1
Caution: This pump has a high stroke rate & needs at least 25 psig back pressure and water-like viscosity.
2
These pumps are subject to export restrictions.
MOTORS 1 = 90 IEC FRAME
2 = 100 IEC FRAME
3 = 56C FRAME
4 = 145TC FRAME

WET END P = PP Liqud End - PTFE Diaphragm and PTFE O-rings - Ceramic Ball Valves
MATERIALS: F = PVDF Liqud End - PTFE Diaphragm and PTFE O-rings - Ceramic Ball Valve
X = No Motor Purchased (Pump will come with Main Assy and Motor Frame Kit
M = Motor Purchased (as line Item) (Pump will come completely assembled)

OMNI DC7 Series Selection Guide EP C B _

MODELS EP = MPC VECTOR
ENCLOSURE C = NEMA 4X (IP56)

RATINGS B = 2 HP (1.5kW) 208-240 VAC, 1 Phase, 50/60 Hz

LANGUAGE X = English
A = German
B = French
C = Spanish
A completed model number should look like "EPCBX"

Motor Selection
Part Number Power (hp / kW) Volts Phase Hz RPM Frame Enclosure
MD496 1.5 / 1.1 60 NEMA 56C
208-230 / 1725
W773127-001 ** 2 / 1.5 (DC7 Duplex) 3 60 NEMA 145TC TEFC
460
NP500622-000 1.5 / 1.1 60 1140 NEMA 56C
NP500619-000 1.5 / 1.1 1425 /
50/6
NP500624-000 ** 2 / 1.5 (DC7 Duplex) 220 / 380 3 1725 IEC 90 TEFC
0
NP500621-000 1.5 / 1.1 940 / 1140

Performance & Selection Table

MODEL DC7C DC7D DC7J DC7K
Capacity GPH 412 507¹ 824 1014¹
60 hz & MPC LPH 1560 1920¹ 3120 3840¹
Capacity GPH 343 423 687 845
50 hz LPH 1300 1600 2600 3200
Pressure PSIG 60
(max.) BAR 4.1
1725 175 223 1 175 223 1
SPM @
1425 146 186 146 186
HP/kW Required 1.5 / 1.1 2 / 1.5
1 1/2" (F)NPT, ANSI 1 1/2" &
Connection Size
DIN 40 FLANGE
1
This selection uses a high stroking rate, use with caution.
Must have at least 25 psig discharge pressure and water-like viscosity.
 49

Mechanical Diaphragm Pumps

Common Pump Accessories - Omni & Others 150 PSI Pulsation Dampeners - Chargeable OMN
Component Size Material Part No. Volume Body Bladder Conn. Size Part Number Type
Drip Cover, EPDM 3/8" FNPT W777614-PPN Connection
Motor 56C Steel, Baldor NP999119 CSPE 3/8" FNPT W777614-PPH NPT
1/2" PVC/TFE NA100001-PVC TFE 3/8" FNPT W777614-PPT NPT
1/2" PVDF/TFE NA100001-PVD POLY Viton 3/8" FNPT W777614-PPV BSPT
1/2" SS/TFE NA100001-316 CSPE 1/2" FNPT L9908300-HYP NPT
Pressure 1" PVC/TFE NA100002-PVC TFE 1/2" FNPT L9908300-TFE BSPT
Relief Valves 1" PVDF/TFE NA100002-PVD Viton 1/2" FNPT L9908300-VIT NPT
1" SS/TFE NA100002-316 CSPE 1/2" FNPT L9908400-HYP BSPT
1.5" PVC/TFE NA100003-PVC 10 cubic PVC TFE 1/2" FNPT L9908400-TFE NPT
1.5" PVDF/TFE NA100003-PVD inches Viton 1/2" FNPT L9908400-VIT BSPT
1/2" PVC/TFE NA200001-PVC EPDM 3/8" FNPT W777614-PVN NPT
1/2" PVDF/TFE NA200001-PVD CSPE 3/8" FNPT W777614-PVH BSPT
PVDF
1/2" SS/TFE NA200001-316 TFE 3/8" FNPT W777614-PVT N/A
Back Pressure 1" PVC/TFE NA200002-PVC Viton 3/8" FNPT W777614-PVV NPT
Valves 1" PVDF/TFE NA200002-PVD EPDM 3/8" FNPT W777611-16N NPT
1" SS/TFE NA200002-316 CSPE 3/8" FNPT W777611-16H BSPT
316 SS
1.5" PVC/TFE NA200003-PVC TFE 3/8" FNPT W777611-16T NPT
1.5" PVDF/TFE NA200003-PVD Viton 3/8" FNPT W777611-16V BSPT
Gauge 1/4" CPVC/TFE NA500001-CPVC EPDM 3/4" FNPT W777616-PPN NPT
Isolator w/ 1/4" PVDF/TFE NA500001-PVD CSPE 3/4" FNPT W777616-PPH BSPT
POLY
200PSI Gauge 1/4" 316SS/TFE NA500001-316 TFE 3/4" FNPT W777616-PPT
1/2" PVC 100mL NA300001-PVC Viton 3/4" FNPT W777616-PPV
1/2" PVC 200mL NA300002-PVC EPDM 3/4" FNPT W777616-PVN
3/4" PVC 500mL NA300003-PVC 85 cubic CSPE 3/4" FNPT W777616-PVH
PVDF
3/4" PVC 1000mL NA300004-PVC inches TFE 3/4" FNPT W777616-PVT
1" PVC 2000mL NA300005-PVC Viton 3/4" FNPT W777616-PVV
1" PVC 4000mL NA300006-PVC EPDM 3/4" FNPT W777613-16N
2" PVC 10,000mL NA300007-PVC CSPE 3/4" FNPT W777613-16H
316 SS
2" PVC 20,000mL NA300008-PVC TFE 3/4" FNPT W777613-16T
1/2" Glass/PVD 100mL NA300009-PVD Viton 3/4" FNPT W777613-16V
Calibration 1/2" Glass/PVD 200mL NA300010-PVD EPDM 2" FNPT W777618-PPN
Column 3/4" Glass/PVD 500mL NA300011-PVD CSPE 2" FNPT W777618-PPH
POLY
3/4" Glass/PVD 1000mL NA300012-PVD TFE 2" FNPT W777618-PPT
1" Glass/PVD 2000mL NA300013-PVD Viton 2" FNPT W777618-PPV
1" Glass/PVD 4000mL NA300014-PVD EPDM 2" FNPT W777618-PVN
1/2" Glass/SS 100mL NA300015-316 370 cubic CSPE 2" FNPT W777618-PVH
PVDF
1/2" Glass/SS 200mL NA300016-316 inches TFE 2" FNPT W777618-PVT
3/4" Glass/SS 500mL NA300017-316 Viton 2" FNPT W777618-PVV
3/4" Glass/SS 1000mL NA300018-316 EPDM 2" FNPT W777631-16N
1" Glass/SS 2000mL NA300019-316 CSPE 2" FNPT W777631-16H
316 SS
1" Glass/SS 4000mL NA300020-316 TFE 2" FNPT W777631-16T
1/2" PVC 40085 Viton 2" FNPT W777631-16V
1/2" CPVC NA400001-CPVC EPDM 3/4" FNPT W777615-PPN
1/2" PVD NA400001-PVD CSPE 3/4" FNPT W777615-PPH
Y Strainer POLY
1" PVC NA400002-PVC TFE 3/4" FNPT W777615-PPT
1" CPVC NA400002-CPVC Viton 3/4" FNPT W777615-PPV
1" PVD NA400002-PVD EPDM 3/4" FNPT W777615-PVN
36 cubic CSPE 3/4" FNPT W777615-PVH
argeable OMNI KOPkit Selection Guide PVDF
inches TFE 3/4" FNPT W777615-PVT
mber List Price Type Wetted KOPkit List Viton 3/4" FNPT W777615-PVV
-PPN $ 292.10 Connection Material Pump Model Number Adder EPDM 3/4" FNPT W777612-16N
-PPH $ 310.60 NPT PVDF DC2 NLK020FP $ 300.80 CSPE 3/4" FNPT W777612-16H
-PPT $ 632.00 NPT PVDF DC3 or DC4 NLK040FP $ 451.20 316 SS
TFE 3/4" FNPT W777612-16T
-PPV $ 360.00 BSPT PVDF DC3 or DC4 NLK040FB $ 451.20
$ 314.20 NPT PVDF DC5 NLK050FP $ 630.40 Viton 3/4" FNPT W777612-16V
-HYP
-TFE $ 633.50 BSPT PVDF DC5 NLK050FB $ 630.40 EPDM 2" FNPT W777617-PPN
-VIT $ 365.70 NPT PVDF DC6 NLK060FP $ 804.50 CSPE 2" FNPT W777617-PPH
$ 314.20 BSPT PVDF DC6 NLK060FB $ 804.50
POLY
-HYP TFE 2" FNPT W777617-PPT
-TFE $ 633.50 NPT PP DC5 NLK050PP $ 516.10 Viton 2" FNPT W777617-PPV
-VIT $ 365.70 BSPT PP DC5 NLK050PB $ 516.10
-PVN $ 394.00 NPT PP DC6 NLK060PP $ 679.80 EPDM 2" FNPT W777617-PVN
-PVH $ 414.10 BSPT PP DC6 NLK060PB $ 679.80 175 cubic CSPE 2" FNPT W777617-PVH
PVDF
-PVT $ 741.60 N/A PVDF & PP DC7 NLK070XX $ 578.90 inches TFE 2" FNPT W777617-PVT
-PVV $ 463.50 NPT 316SS DC2 NLK020AP $ 510.90 Viton 2" FNPT W777617-PVV
-16N $ 749.40 NPT 316SS DC3 or DC4 NLK040AP $ 750.90 EPDM 2" FNPT W777630-16N
-16H $ 769.50 BSPT 316SS DC3 or DC4 NLK040AB $ 750.90
-16T $ 1,098.50 NPT 316SS DC5 NLK050AP $ 904.40
CSPE 2" FNPT W777630-16H
316 SS
-16V $ 818.90 BSPT 316SS DC5 NLK050AB $ 810.70 TFE 2" FNPT W777630-16T
-PPN $ 698.40 NPT 316SS DC6 NLK060AP $ 891.00 Viton 2" FNPT W777630-16V
-PPH $ 741.60 BSPT 316SS DC6 NLK060AB $ 891.00 Specifications:
150 PSI Maximum Pressure
-PPT $ 1,285.50
50

Peristaltic Pumps
Series XP
The Chem-Tech XP Series with peristaltic technology delivers
worry-free dosing in a modern design. Each and every compo-
nent of the XP Series is designed and manufactured for opti-
mum riability and durability for REAL Performance.

The electronic timing circuit in the adjustable „A‟ Models pro-

vides reliable pump control, without relying on mechanical ad-
justment components that wear out over time.
The intuitive interface and controls provide easy operation and
the peristaltic design is virtually maintenance-free.

Tailor-made for the water conditioning market, the XP Series

offer affordable solutions in both initial cost and operation. A
rugged gear train and computer-aided peristaltic design ensure
long-lasting performance.

Tested and Certified by WQA

against NSF/ANSI 61-Section 8.
and CSA B483.1

Chem-Tech XP Series Selection Guide XP_ _ _ _ _ _ _

Pump Pressure Rating - PSI (Bar) Tube Motor
Flow Single Head Options Duplex Speed
Size 'H' Tube 'L' Tube 'F' Tube 'L' Tube Size
XP004 4 GPD (0.6 LPH) 80 (5.5) (RPM)
30
125 (8.6) 80 (5.5) 60 (4.1) 2
XP007 7 GPD (1.1 LPH) 50
XP009 9 GPD (1.4 LPH) 70 (4.8) 30
110 (7.6) 70 (4.8) 50 (3.4) 3
MODELS: XP015 15 GPD (2.4 LPH) 50
XP014 14 GPD (2.3 LPH) 50 (3.4) 30
100 (5.9) 50 (3.4) 40 (2.8) 4
XP023 23 GPD (3.6 LPH) 50
XP030 30 GPD (4.7 LPH) 80 (5.5) 40 (2.8) 30
40 (2.8) 6
XP050 50 GPD (7.9 LPH) 50
XP048 48 GPD (7.5 LPH) 25 (1.7) 30
25 (1.7) 8
XP080 80 GPD (12.6 LPH) 50
L 115V, 60Hz
H 230V, 50/60Hz
ELECTRICAL:
R 230V, 50Hzwith Grounded Right Angle European Plug
Note: 50Hz pumps will produce 5/6 of the rated flow
F Fixed Rate, On / Off Only
A Adjustable 20:1 Turndown, On / Off with Current Interrupter Timer
G Duplex Head - Fixed Rate, On / Off Only, 'L' Tube
B Duplex Head - Adjustable, On / Off with Current Interrupter Timer, 'L' Tube
1 Pulse Input, .1 to 1 Second Timer
2 Pulse Input, .2 to 10 Second Timer
DRIVE:
3 Pulse Input, 1 to 60 Second Timer
4 Dry Contact Input - Fixed Rate Pump
5 Dry Contact Input - Adjustable Pump
6 Flow Switch Activated with 3/4" NPT Flow Switch - Fixed Rate Pump
7 Flow Switch Activated with 3/4" NPT Flow Switch - Adjustable Rate Pump
8 7 Day - 8 Event Electronic Timer - Fixed Rate Pump
L Low Pressure Norprene with 1/4" Tube Fittings
H High Pressure Norprene with 1/4" Tube Fittings
3 Low Pressure Norprene with 3/8" Tube Fittings
TUBING:
4 High Pressure Norprene with 3/8" Tube Fittings
F Fluran, Acid resistant tubing with 1/4" Tube Fittings (Doesnot include strainer & injector accessories)
G Fluran, Acid resistant tubing with 3/8" Tube Fittings (Doesnot include strainer & injector accessories)
X Pump Only
1 15 Gallon Tank System
SYSTEM:
3 35 Gallon Tank System
T 15 Gallon ITS System
A completed model should look like "XP030LFLX"
 51

Peristaltic Pumps
Series XPV
The Chem-Tech XPV Series pump combines the best in vari-
able speed peristaltic pump technology with state of the art
control electronics, providing you with unparalleled perform-
ance, control and value. The XPV represents the leading edge
of microprocessor performance management, giving you many
choices of input signal types, and onboard timer programs to
customize this pump to any application. Of course, this pump is
as rugged and reliable as it‟s fixed speed siblings, the XPF and
the XPA.

Key Features
Variable Speed
Fully Scalable 4-20mA Input
Hall Effect Input
Contacting Head Water Meter
Flow Totalization
Cycle Timer Tested and Certified by WQA
against NSF/ANSI 61-Section 8.
Daily Timer and CSA B483.1

LCD Display

Chem-Tech Series XPV uses Chem-Tech Large Pump Discount Structure

Chem-Tech XPV Series Selection Guide XP_ _ _ _ _ _ _
Pump Pressure Rating - PSI (Bar) Tube Speed
Flow Single Head Options Duplex
Size 'H' Tube 'L' Tube 'F' Tube 'L' Tube Size (RPM)
XP008 8 GPD (1.3 LPH) 125 (8.6) 80 (5.5) 60 (4.1) 80 (5.5) 2
MODELS: XP017 17 GPD (2.7 LPH) 110 (7.6) 70 (4.8) 50 (3.4) 70 (4.8) 3 65 Max.
XP033 33 GPD (5.2 LPH) 100 (5.9) 50 (3.4) 40 (2.8) 50 (3.4) 1 4
XP055 55 GPD (8.7 LPH) 80 (5.5) 40 (2.8) 40 (2.8) 2 6
60 Max.
XP100 100 GPD (15.8 LPH) 25 (1.7) 25 (1.7) 8
L 115V, 60Hz
ELECTRICAL: H 230V, 60/50Hz
R 230V, 60/50Hz with Grounded Right Angle European Plug
V Variable Input Control with I/O Cable
DRIVE:
G Duplex Head - Low Pressure Norprene with 1/4" Tube Fitting
L Low Pressure Norprene with 1/4" Tube Fittings
H High Pressure Norprene with 1/4" Tube Fittings
3 Low Pressure Norprene with 3/8" Tube Fittings
TUBING:
4 High Pressure Norprene with 3/8" Tube Fittings
F Fluran, Acid resistant tubing with 1/4" Tube Fittings (Doesnot include strainer & injector accessories)
G Fluran, Acid resistant tubing with 3/8" Tube Fittings (Doesnot include strainer & injector accessories)
X Pump Only
1 15 Gallon Tank System
SYSTEM:
3 35 Gallon Tank System
T 15 Gallon ITS System
A completed model should look like "XP033LVLX"
1
Max flow rate is 15 GPD (2.4 LPH) with Fluron tube.
2
Max flow rate is 28 GPD (4.4 LPH) with Fluron tube.
52

XP & XPV SERIES PARTS PRICE SCHEDULE

Part Number Description Part Number Description

KOPkits - Low Pressure ACCESSORIES ASSEMBLY
NCKA2LPAP1 KOPkit XP - 004 / 007 / 008 J63051 Access. Kit, PVC/VTN, .25N
NCKA3LPAP1 KOPkit XP - 009 / 015 / 017 J30257 Grease Kit
NCKA4LPAP1 KOPkit XP - 023 / 033 / 014
NCKA6LPAP1 KOPkit XP - 030 / 050 / 055 PARTS
NCKA8LPAP1 KOPkit XP - 048 / 080 / 100 J60552 Strainer Assembly w/o Valve
KOPkits - High Pressure J63002 Control Panel Cover (Clear)
NCKA2HPAP1 KOPkit XP - 004 / 007 / 008 J63004 Rain Hood
NCKA3HPAP1 KOPkit XP - 009 / 015 / 017 J63007 Switch, On-Off
NCKA4HPAP1 KOPkit XP - 023 / 033 / 014 J63013 Timer Assy
NCKA6HPAP1 KOPkit XP - 030 / 055 J63016 Gear Motor, 30RPM / 120V / 50-60Hz
NCKA24PAP1 KOPkit XP - 004 / 008 - 3/8" J63017 Gear Motor, 30RPM / 240V / 50-60Hz
NCKA44PAP2 KOPkit XP - 033 / 014 - 3/8" J63018 Gear Motor, 50RPM / 120V / 50-60Hz
KOPkits - Duplex Low Pressure J63019 Gear Motor, 50RPM / 240V / 50-60Hz
NCKD2LPAP1 KOPkit XP - 004 / 008 J63023 Housing Assy, 100% Fixed Rate
NCKD3LPAP1 KOPkit XP - 009 / 017 J63024 Housing Assy, 100% Timer
NCKD4LPAP1 KOPkit XP - 033 / 014 L1900500-000 Thumb Screw #6 (Control Pnl Cover)
NCKD6LPAP1 KOPkit XP - 030 / 055 NC110002-PVC Coupling Nut, .25 NPT
NCKD8LPAP1 KOPkit XP - 048 / 100 NC110016-000 Sleeve, .25 OD Tube
NC170004-000 Label, Earth Ground
TUBE KITS NC190000-000 Knob, #10 Thumb Screw (Head Mtg)
Low Pressure 1/4" Tube Fittings U8800712 Injection Valve Assembly
NC90XX2LPA-XXXXX Kit, Tube Assy - 004 / 007 / 008 NC82XX3LP1-XXXXX Roller Assembly For Size 2-6 Tubes
NC90XX3LPA-XXXXX Kit, Tube Assy - 009 / 015 / 017 NC82XX8LP1-XXXXX Roller Assembly For Size 8 Tube
NC90XX4LPA-XXXXX Kit, Tube Assy - 023/ 033 / 014
NC90XX6LPA-XXXXX Kit, Tube Assy - 030 / 050 / 055 TANK / WALL MOUNT KITS
NC90XX8LPA-XXXXX Kit, Tube Assy - 080 / 100 J63047 15 Gal Tank Bracket
High Pressure 1/4" Tube Fittings J63048 ITS Tank Adaptor Plate
NC90XX2HPA-XXXXX Kit, Tube Assy - 004 / 007 / 008 J63049 Tank / Wall Mount with Shield
NC90XX3HPA-XXXXX Kit, Tube Assy - 009 / 015 / 017
NC90XX4HPA-XXXXX Kit, Tube Assy - 023/ 033 / 014 WATER METER PULSE TIMER
NC90XX6HPA-XXXXX Kit, Tube Assy - 030 / 055 U8800655 Control Mate, 115V
Low Pressure 3/8" Tube Fittings U8800715 Control Mate LT, 0.1 to 10 seconds
NC90XX23PA-XXXXX Kit, Tube Assy - 004 / 007 / 008 U0818343 Bracket, Mount
NC90XX33PA-XXXXX Kit, Tube Assy - 009 / 015 / 017
NC90XX43PA-XXXXX Kit, Tube Assy - 023/ 033 / 014 XPV Series Parts
NC90XX63PA-XXXXX Kit, Tube Assy - 030 / 050 / 055 J63006 Drive Motor, Variable Speed
NC90XX83PA-XXXXX Kit, Tube Assy - 080 / 100 J63053 Digital Control Board, Variable Speed
High Pressure 3/8" Tube Fittings J63054 Power Supply, Variable Speed
NC90XX24PA-XXXXX Kit, Tube Assy - 004 / 007 / 008 J63071 Motor Control Board, Variable Speed
NC90XX34PA-XXXXX Kit, Tube Assy - 009 / 015 / 017 J63115 Fuse Kit, Variable Speed
NC90XX44PA-XXXXX Kit, Tube Assy - 023/ 033 / 014
NC90XX64PA-XXXXX Kit, Tube Assy - 030 / 055
Fluran 1/4" Tubing Fittings
NC90XX2FPA-XXXXX Kit, Tube Assy - 004 / 007 / 008
NC90XX3FPA-XXXXX Kit, Tube Assy - 009 / 015 / 017
NC90XX4FPA-XXXXX Kit, Tube Assy - 023/ 033 / 014
Fluran 3/8" Tubing Fittings
NC90XX2GPA-XXXXX Kit, Tube Assy - 004 / 007 / 008
NC90XX3GPA-XXXXX Kit, Tube Assy - 009 / 015 / 017
NC90XX4GPA-XXXXX Kit, Tube Assy - 023/ 033 / 014
 53

Mechanical Diaphragm Pumps

Prime Performance
The Chem-Tech Prime Performance Series pumps have a
specially designed degassing valve system for applications
using off-gasing chemicals like sodium hypochlorite. Built upon
motorized-diaphragm technology, the Prime Performance Se-
ries delivers dependable performance, extended longevity and
consistent metering over long periods of time in a compact
form.

A top-mounted, one-way vent valve assembly evacuates gas

bubbles from the pump head, providing for reliable operation.

PRIME PERFORMANCE Selection Guide X_ _ _ - _ _ - _ _ A _ - ___

MODELS: 015 = 15 gpd (2.34 lph) max pres.: 100 PSI (7 BAR)
024 = 24 gpd (3.78 lph) max pres.: 100 PSI (7 BAR)
030 = 30 gpd (4.72 lph) max pres.: 100 PSI (7 BAR)
068 = 68 gpd (10.72 lph) max pres.: 60 PSI (4 BAR)
100 = 100 gpd (15.76 lph) max pres.: 60 PSI (4 BAR)
ELECTRICAL: XA = 115V, 60 Hz
XB = 230V, 50 Hz
XC = 230V, 60 Hz
LIQUID END BAA = PVC / CSPE / Ceramic
MATERIALS: BBA = PVC / Viton / Ceramic
Head, Fittings/
Diaph., Seats/ Balls
CONNECTION 6 = Tubing .38" PE BLK Suction / .38" PE BLK Discharge / .38" PE BLK Return
SIZES: 8 = Tubing .38" PVC Suction / .38" PE Discharge / .38" PVC Return
7 = Tubing .50" PE BLK Suction / .50" PE BLK Discharge / .50" PE BLK Return
9 = Tubing .50" PVC Suction / .50" PE Discharge / .50" PVC Return
SUFFIX CODES: XXX = Standard
001 = Current Interrupter
15T = 15 gal tank w/ bulkhead for vent,level wand,safety cap & fasteners
35T = 35 gal tank w/ bulkhead for vent and fasteners
A complete model should look like "X024-XA-BBA9XXX"
Pumps come with foot valve/strainer/weight, 4' of suction tubing, 4' of return tubing, 8' of discharge tubing, and injecion/back
pressure valve assembly.

KOPkits

PRIME PERFORMANCE KOPkit Selection Guide KX100 - _ _ A _

PRODUCT DESIGNATOR: KX100 = Chem-Tech Kopkit

LIQUID END MATERIALS: BAA = PVC / CSPE / Ceramic

Head, Diaph., Seats & Balls BBA = PVC / Viton / Ceramic

CONNECTION : 6 = Tubing .38" Suction / Discharge / Return

8 = Tubing .38" Suction / Discharge / Return
7 = Tubing .50" Suction / Discharge / Return
9 = Tubing .50" Suction / Discharge / Return
54

Mechanical Diaphragm
Pumps
Series 100, 150, 200
Series 100 Models - The preferred metering pump for water conditioning pro-
fessionals around the world. Perfect for applications where economical, con-
sistent performance is required. Capable of a wide range of flows, from less
than 3 USgpd up to 30 USgpd and pressures up to 100 psig.
Series 150 Models - Built upon the same solid platform as the 100 Models,
these units are capable of higher flowrates. With a range offering up to 100
USgpd, the Series 150 can meet the demands of larger applications. Maximum
pressure is 60 psig.
Series 200 Models – The pump popular for their rugged design for continu-
ous duty operation offers feed rates from 10 to 120 gpd and pressures up to
150 psi.
Note: Standard Features do not add to the pump price.
Chem-Tech Series 100, 150, 200 Selection Guide ____ - __ - ___ _ ___
MODELS: Series 100
X003 = 3 gpd (0.47 lph) max pres.: 100 PSI (7 BAR)
X007 = 7 gpd (1.00 lph) max pres.: 100 PSI (7 BAR)
X015 = 15 gpd (2.34 lph) max pres.: 100 PSI (7 BAR)
X024 = 24 gpd (3.78 lph) max pres.: 100 PSI (7 BAR)
X030 = 30 gpd (4.72 lph) max pres.: 100 PSI (7 BAR)
Series 150
X068 = 68 gpd (10.72 lph) max pres.: 60 PSI (4 BAR)
X100 = 100 gpd (15.76 lph) max pres.: 60 PSI (4 BAR)
Series 200
X210 = 10 gpd (1.5 lph) max pres.: 150 PSI (10 BAR)
X215 = 15 gpd (2.34 lph) max pres.: 150 PSI (10 BAR)
X220 = 20 gpd (3.15 lph) max pres.: 150 PSI (10 BAR)
X230 = 30 gpd (4.72 lph) max pres.: 125 PSI (9 BAR)
X240 = 40 gpd (6.31 lph) max pres.: 125 PSI (9 BAR)
X260 = 60 gpd (9.46 lph) max pres.: 125 PSI (9 BAR)
X280 = 80 gpd (12.6 lph) max pres.: 100 PSI (7 BAR)
2100 = 100 gpd (15.76 lph) max pres.: 100 PSI (7 BAR)
2120 = 120 gpd (18.91 lph) max pres.: 80 PSI (6 BAR)

ELECTRICAL: XA = 115V, 60 Hz
XB = 230V, 50 Hz (not available in 2120)
XC = 230V, 60 Hz
XD = 115V, 50/60 Hz, T.E.F.C. (X200's only)
XL = 230V, 50/60 Hz, T.E.F.C. (X200's only)

LIQUID END AAA = SAN/PVC / CSPE / Ceramic

MATERIALS: AAB = SAN/PVC / CSPE / TFE
Pump Head & ABA = SAN/PVC / Viton / Ceramic
Fittings/Seats ABB = SAN/PVC / Viton / TFE
& O-rings/Balls ACA = SAN/PVC / Tef/Viton / Ceramic
AHA = SAN/PVC / Tef/CSPE / Ceramic
BAA = PVC / CSPE / Ceramic
BAB = PVC / CSPE / TFE
BBA = PVC / Viton / Ceramic
BBB = PVC / Viton / TFE
BHA = PVC / Tef/Hyp / Ceramic
DAA = PP / CSPE / Ceramic
DAB = PP / CSPE / TFE
DBA = PP / Viton / Ceramic
DBB = PP / Viton / TFE
GFA = PVC / TFE / Ceramic (dbl)
GFB = PVC / TFE / TFE (dbl)
EFC = 316 / TFE / 316 (dbl)
CONNECTION A = Tubing .44" PVC Suction / .50" PE Discharge
SIZES: C = Tubing .38" PVC Suction / .38" PE Discharge
F = Tubing .44" PVC Suction / .50" PE BLK Discharge
S = Tubing .38" PVC Suction / .38" PE BLK Discharge
X w/ 316 = .25" FNPT Suction / .25" FNPT Discharge

SUFFIX XXX = Standard

CODES: 001 = Current Interrupter
500* = Five Function Valve
520* = Five Function Degas Valve
ITS = 15 gal ITS Tank System
* Not available in SS. Adder price is per head.
A completed model number should look like "X015-XA-BAAAXXX"
 55

Mechanical Diaphragm
Pumps
Series 100D and 150D
Offering the same features as the Series 100 and 150 Models but configured
as duplex units capable of dosing 2 chemicals at different rates.
Note: Standard Features do not add to the pump price.
Remember that liquid end adders must be doubled for
duplex pump models.

Chem-Tech Series 100D and 150D Duplex Selection Guide 1_ _ _ - __ - ___ _ ___
MODELS: Series 100D Duplex Pump
144 = 4.0 gpd (0.63 lph) / 4.0 gpd (0.63 lph) max pres.: 50 PSI (3.5 BAR)
145 = 5.0 gpd (0.79 lph) / 4.0 gpd (0.63 lph) max pres.: 50 PSI (3.5 BAR)
155 = 5.0 gpd (0.79 lph) / 5.0 gpd (0.79 lph) max pres.: 50 PSI (3.5 BAR)
244 = 6.5 gpd (1.03 lph) / 6.5 gpd (1.03 lph) max pres.: 75 PSI (5.25 BAR)
245 = 7.5 gpd (1.18 lph) / 6.5 gpd (1.03 lph) max pres.: 75 PSI (5.25 BAR)
255 = 7.5 gpd (1.18 lph) / 7.5 gpd (1.18 lph) max pres.: 75 PSI (5.25 BAR)
264 = 12.0 gpd (1.89 lph) / 8.0 gpd (1.26 lph) max pres.: 60 PSI (4.2 BAR)
265 = 12.0 gpd (1.89 lph) / 9.0 gpd (1.43 lph) max pres.: 60 PSI (4.2 BAR)
344 = 14.0 gpd (2.21 lph) / 14.0 gpd (2.21 lph) max pres.: 75 PSI (5.25 BAR)
345 = 18.0 gpd (2.84 lph) / 14.0 gpd (2.21 lph) max pres.: 75 PSI (5.25 BAR)
355 = 18.0 gpd (2.84 lph) / 18.0 gpd (2.84 lph) max pres.: 75 PSI (5.25 BAR)
364 = 25.0 gpd (3.94 lph) / 15.0 gpd (2.37 lph) max pres.: 60 PSI (4.2 BAR)
365 = 25.0 gpd (3.94 lph) / 19.0 gpd (3.0 lph) max pres.: 60 PSI (4.2 BAR)
444 = 30.0 gpd (4.72 lph) / 30.0 gpd (4.72 lph) max pres.: 75 PSI (5.25 BAR)
445 = 30.0 gpd (4.72 lph) / 33.0 gpd (5.20 lph) max pres.: 75 PSI (5.25 BAR)
Series 150D
455 = 33.0 gpd (5.20 lph) / 33.0 gpd (5.20 lph) max pres.: 75 PSI (5.25 BAR)
464 = 69.0 gpd (10.88 lph) / 32.0 gpd ( 5.05 lph) max pres.: 60 PSI (4.2 BAR)
465 = 69.0 gpd (10.88 lph) / 24.0 gpd ( 3.79 lph) max pres.: 60 PSI (4.2 BAR)
466 = 69.0 gpd (10.88 lph) / 69.0 gpd (10.88 lph) max pres.: 60 PSI (4.2 BAR)

ELECTRICAL: XA = 115V, 60 Hz
XB = 230V, 50 Hz
XC = 230V, 60 Hz

LIQUID END AAA = SAN/PVC / CSPE / Ceramic

MATERIALS: AAB = SAN/PVC / CSPE / TFE
Pump Head & ABA = SAN/PVC / Viton / Ceramic
Fittings/Seats ABB = SAN/PVC / Viton / TFE
& O-rings/Balls ACA = SAN/PVC / Tef/Hyp / Ceramic
AHA = SAN/PVC / Tef/Viton / Ceramic
BAA = PVC / CSPE / Ceramic
BAB = PVC / CSPE / TFE
BBA = PVC / Viton / Ceramic
BBB = PVC / Viton / TFE
BHA = PVC / Tef/Hyp / Ceramic
DAA = PP / CSPE / Ceramic
DAB = PP / CSPE / TFE
DBA = PP / Viton / Ceramic
DBB = PP / Viton / TFE
GFA = PVC / TFE / Ceramic (dbl)
GFB = PVC / TFE / TFE (dbl)
EFC = 316 / TFE / 316 (dbl)
CONNECTION A = Tubing .44" PVC Suction / .50" PE Discharge
SIZES: C = Tubing .38" PVC Suction / .38" PE Discharge
F = Tubing .44" PVC Suction / .50" PE BLK Discharge
S = Tubing .38" PVC Suction / .38" PE BLK Discharge
X w/ 316 = .25" FNPT Suction / .25" FNPT Discharge

SUFFIX XXX = Standard

CODES: 001 = Current Interrupter
500* = Five Function Valve
520* = Five Function Degas Valve
ITS = 15 gal ITS Tank System
* Not available in SS. Adder price is per head.
A completed model number should look like "1445-XA-BAAAXXX"
STANDARD ACCESSORIES
Series 100/150/100D/150D/200: Pumps with tubing connections come with foot valve/strainer/weight, 4' of suction tubing, bleed
valve, 4' of return tubing, 8' of discharge tubing, and injection/back pressure valve assembly.
Any pumps with piping connections come with strainer and injection valve only.
56

KOPkits
Chem-Tech KOPkit Selection Guide KX100 - _ _ _ _
PRODUCT DESIGNATOR: KX100 = Chem-Tech Kopkit

LIQUID END MATERIALS: AAA = SAN/PVC / CSPE / Ceramic

Head, Diaph., Seats & Balls AAB = SAN/PVC / CSPE / TFE
ABA = SAN/PVC / Viton / Ceramic
ABB = SAN/PVC / CSPE / TFE
ACA = SAN/PVC / Tef/Hyp / Ceramic
AHA = SAN/PVC / Tef/Viton / Ceramic
BAA = PVC / CSPE / Ceramic
BAB = PVC / CSPE / TFE
BBA = PVC / Viton / Ceramic
BBB = PVC / Viton / TFE
BHA = PVC / Tef/Hyp / Ceramic
DAA = PP / CSPE / Ceramic
DAB = PP / CSPE / TFE
DBA = PP / Viton / Ceramic
DBB = PP / Viton / TFE
GFA = PVC / TFE / Ceramic (dbl)
GFB = PVC / TFE / TFE (dbl)
EFC = 316 / TFE / 316 (dbl)
CONNECTION : A = Tubing .44" PVC Suction / .50" PE Discharge
C = Tubing .38" PVC Suction / .38" PE Discharge
F = Tubing .44" PVC Suction / .50" PE BLK Discharge
S = Tubing .38" PVC Suction / .38" PE BLK Discharge
X w/ 316 = .25" FNPT Suction / .25" FNPT Discharge

SERIES 100, 150, 100D, 150D AND 200 PARTS PRICE SCHEDULE
Part No. Description Part No. Description
00006 Suction Tubing - per foot 7/16" OD J26909 Bulkhead Fitting (PVC-5/16")
00007 Suction Tubing - per foot 3/8" J26910 Bulkhead Fitting without strainer (PVC-3/8")
00008 Discharge Tubing - per foot 1/2" OD J26905 Bulkhead Fitting for ITS (PVC-1/4")
00009 Discharge Tubing - per foot 1/2" Black J27903 Gasket, TFE
00010 Discharge Tubing - per foot 3/8" 27911 Gasket
00011 Discharge Tubing - per foot 3/8" Black 28210 Gear Housing Assembly #210
20038 1/2" NPT Connection - PVC - fits Suction side of 28211 Gear Housing Assembly #215
Pump Head and Back Ck. Vlv. Assy. (per connection) 28212 Gear Housing Assembly #220
20039 1/2" NPT Connection - PVC - fits Discharge side of 28213 Gear Housing Assembly #230
Pump Head and Strainer Assy. (per connection) 28214 Gear Housing Assembly #240
J20560 Ball Check (ceramic) 28215 Gear Housing Assembly #260
21829 Drive Bracket Assy. S100 28216 Gear Housing Assembly #280
21960 Bronze Bushing (right) 28217 Gear Housing Assembly #2-100
21961 Bronze Bushing (left) 28218 Gear Housing Assembly #2-120
21962 Bronze Bushing (center) 28521 Grommet
21971 Diaphragm Shaft Bushing 28800 Head, SAN
22255 Cam Bearing Assy. S100 - 3, 7, 15, 30 GPD J28801 Head, PVC
22256 Cam Bearing Assy. S100 - 24 GPD 28803 Head, Polypropylene
22257 Cam Bearing Assy. S150 - 68, 100 GPD 28896 Head Assy, (SST-TFE-SST-1/4" S/D)
23700 Shaft Collar - .38 Small 28897 Head Assy, (PVC-VT-C-1/2" S/D)
23701 Shaft Collar - .38 Large 28899 Head Assy, (PP-VT-C-1/2" S/D)
J24269 Oil (quart) 28902 Head Assy, (PVC-VT-C-3/8" S/D)
24450 Current Interrupter - S100 - 115V 28903 Head Assy, (SAN-HYP-C-1/2" S/D)
24452 Current Interrupter - S200 - 115V 28904 Head Assy, (SAN-HYP-C-3/8" S/D)
24453 Current Interrupter/Plug Receptacle S200 - 115V 29020 Head Assy, (PVC-VT-C-1/2" S - 3/8" D)
24454 Current Interrupter/Plug Receptacle/Bottom Plate 29036 Head Assy, (PP-VT-C-3/8" D)
(Standard) 115V 29230 Motor Housing
24481 Current Interrupter - S100 - 230V 29232 Pump Housing (Duplex)
24482 Current Interrupter - S200 - 230V 29313 Main Housing 10, 15, 20, 30, 40, 60, 100 GPD
24820 Cord Assy. - 115V, 60 Hz 29314 Main Housing 120 GPD only
24821 Cord - 230V, 50 or 60 Hz 30460 Output Adjustment Knob
J24960 Coupling Nut, PVC 1/2" (Standard) 30467 Output Adj Knob Asm S150
24961 Coupling Nut, PP 1/2" 30468 Output Adj Knob Asm S100
24963 Coupling Nut, PVC 3/8" J30496 Housing - S100 - 3, 7, 15, 30 GPD
25180 Motor Cover J30497 Housing - S100 - 24 GPD
25704 Diaphragm, CSPE J30498 Housing - S150, 68, 100 GPD
25706 Diaphragm, Viton J30503 Motor - 115V, 60 Hz, S200
25707 Diaphragm, PTFE Coated J30504 Motor - 230V, 50 Hz, S200
J26780 Injection Fitting, PVC 3/8" J30505 Motor - 230V, 60 Hz, S200
26781 Injection Fitting, PVC 1/2" J30507 Kit, Bleed, Valve, PVC/HPY/ 3/8
26858 Bulkhead Fitting (PP-1/2") J30509 Kit, Bleed, Valve, PVC/VTN/ 3/8
26867 Bulkhead Fitting (PP-3/8") J30510 Kit, Bleed, Valve, PVC/TFE/ 3/8
J26907 Bulkhead Fitting (PVC-1/2") J30511 Kit, Bleed, Valve, FPP/HYP/ 3/8
J26908 Bulkhead Fitting (PVC-3/8") J30513 Kit, Bleed, Valve, FPP/VTN/ 3/8
 57

SERIES 100, 150, 100D, 150D AND 200 PARTS PRICE SCHEDULE
Part Number Description Part Number Description
J30514 Kit, Bleed, Valve, FPP/TFE/ 3/8 41588 Anti-Siphon Valve (PVC-VT-1/2")
J30515 Kit, Bleed, Valve, PVC/HPY/ 1/2 41624 Anti-Siphon Valve (PVC-HY-1/2") (Standard)
J30517 Kit, Bleed, Valve, PVC/VTN/ 1/2 41657 Back Check Valve Assy (PVC-HY-C-3/8")
J30518 Kit, Bleed, Valve, PVC/TFE/ 1/2 J41658 Back Check Valve Assy (PVC-HY-C-1/2")
J30519 Kit, Bleed, Valve, FPP/HYP/ 1/2 41659 Back Check Valve Assy (PP-VT-C-1/2")
L3300V03-FPP Kit, Bleed, Valve, FPP/VTN/ 1/2 41661 Back Check Valve Assy (PVC-VT-C-1/2")
J30522 Kit, Bleed, Valve, FPP/TFE/ 1/2 41665 Anti-Scale Injector (PVC-HY-1/2")
31081 Locking Lever - S100, 215, 230, 260 41666 Double Ball Ck Vlv Cart Assy (PVC-3/8") Suct
31082 Locking Lever 20, 40, GPD S200 J41667 Double Ball Ck Vlv Cart Assy (PVC-1/2") Suct
31083 Locking Lever - S150, 280, 2-100, 2-120 41668 Double Ball Ck Vlv Cart Assy (PVC-3/8") Disch
32520 Motor - 7 SPM, 115V, 60 Hz, 003 J41669 Double Ball Ck Vlv Cart Assy (PVC-1/2") Disch
32521 Motor - 13 SPM, 115V, 60 Hz, 007 J41694 Back Check Valve Assy (PVC-HYP-C-1/2")
32522 Motor - 25 SPM, 115V, 60 Hz, 015 41695 Back Check Valve Assy (PVC-VT-C-3/8")
32523 Motor - 51 SPM, 115V, 60 Hz, 024/030/068 41696 Back Check Valve Assy (PP-VT-C-3/8")
32524 Motor - 7 SPM, 230V, 60 Hz, 003 41705 6" Ck Vlv Inj Assy (PVC-HY-C-3/8")
32525 Motor - 13 SPM, 230V, 60 Hz, 007 41707 6" Ck Vlve Inj Assy (PVC-VT-C-3/8")
32526 Motor - 25 SPM, 230V, 60 Hz, 015 41708 6" Ck Vlv Inj Assy (PVC-VT-C-1/2")
32527 Motor - 51 SPM, 230V, 60 Hz, 024/030/068 41709 6" Ck Vlv Inj Assy (PP-VT-C-3/8")
32528 Motor - 7 SPM, 230V, 50 Hz, 003 41710 6" Ck Vlv Inj Assy (PP-VT-C-1/2")
32529 Motor - 13 SPM, 230V, 50 Hz, 007 41720 Anti-Siphon Valve (PVC-HY-1/2" NPT)
32530 Motor - 25 SPM, 230V, 50 Hz, 015 41786 Anti-Siphon Valve (PVC-VT-1/2" NPT)
32531 Motor - 51 SPM, 230V, 50 Hz, 024/030/068 41795 Back Check Valve Assy (PVC-HY-C-1/2" x 1/2" NPT)
32532 Motor - 70 SPM, 115V, 60 Hz, 100 J42020 Head Bolt Washer SS .20 x .38
32533 Motor - 70 SPM, 230V, 50 Hz, 100 J42030 Fiber Washer
32535 Motor - 70 SPM, 230V, 60 Hz, 100 42031 Washer, Fiber
J34379 Backing Plate J60030 Head Assy (SAN-HY-C-3/8" D)
34405 Plate, Motor Cover J61222 Kit, 5 Function Valve incl L380DT03-PVC for Series 100/200
34423 Back Plate J61271 Kit, 5 Function Valve incl L380FT03-PVC for Series 200
34532 Oil Filler Plug w/Cap J61539 Kit, 5 Function Valve incl L380DT02-PVC for Series 100/200
J37073 Screw Motor Cover J61502 Kit, Oil Drain Plug (includes J37002 & J42030)
37080 Output Adjust Screw 10, 20, 40 GPD J61503 Kit, S200 Back Plate Screws (5 - J37017, 5 - J42030)
37081 Output Adjust Screw 15, 30, 60 GPD J61504 Kit, S200 Motor Cover Hdwe (2 - J37002, 2 - J42030)
37083 Output Adjust Screw 80, 100, 120 GPD J61505 Kit, S100 Motor Cover Hdwe (4 - J37032, 2 - J37073)
37088 Output Adj Screw - S150 J61506 Kit, S100 Cam Bearing Set Screw (2 - 37047)
37089 Output Adj Screw - S100 J61507 Kit, S100 Motor Mount Hdwe (3 - 37049)
37300 Oil Seal J61508 Kit, S200 Main Housing Screw
J37440 Valve Seat, CSPE (2 - 37021, 2 - J42083, 2 - 42031)
J37442 Valve Seat, Viton J61509 Kit, S200 Shaft Coupling Motor (1 - 24966, 1 - 37060)
37886 Diaphragm Shaft J61510 Kit, S200 Shaft Coupling Gear (1 - 24967, 1 - 37061)
38080 Locking Sleeve J61511 Kit, Screw Motor Cover (2 - J37073)
38980 Diaphragm Return Spring J61512 Kit, Valve Seats CSPE (4 - J37440)
38981 Coupling Spring J61513 Kit, Ball Checks (4 - J20560)
38984 Valve Spring - top - light J61515 Kit, Valve Seats Viton (4 - J37442)
J38985 Valve Spring J61516 Kit, Head Mounting Bolts (4 - J37005, 4 - J42020)
J60717 Foot Valve & Strainer Assy (PVD-Hyp-C-3/8") J61518 Kit, Gasket TFE (4 - J27903)
J60729 Foot Valve & Strainer Assy (PVD-Hyp-C-1/2") L9906700-000 Sinker
J60718 Foot Valve & Strainer Assy (PVD-VT-C-3/8")
J60730 Foot Valve & Strainer Assy (PVD-VT-C-1/2") SPECIAL ADAPTERS
J41540 Valve Housing Discharge, PVC 1/2" 20013 Pressure Relief Valve Adapter
41541 Valve Housing Discharge, PP 1/2"
41543 Valve Housing Discharge, PVC 3/8" STAINLESS STEEL PUMP ACCESSORIES
41544 Valve Housing Discharge, PP 3/8" 28896 316 SS Head Assy - Double Check Vlv
J41548 Valve Housing Suction, PVC 1/2" (TFE, SS) 1/4" FPT Conn
J41834 Valve Housing Suction, PP 1/2" J41656 316 SS Double Back Ck Vlv Assembly
41551 Valve Housing Suction, PVC 3/8" (TFE, SS) 1/4" FPT Conn
J41835 Valve Housing Suction, PP 3/8" J40095 316 SS Strainer Assy 1/4" FPT Conn
J41640 316 SS Suction Valve 1/4" FPT
J41641 316 SS Discharge Valve 1/4" FPT
58

Mechanical Diaphragm
Pumps
Series 250
The Series 250 is a mechanically activated, heavy duty
diaphragm feed pump that provide excellent efficiency un-
der strenuous conditions. The Series 250 combines the
power and repeatability of piston pumps with the chemical
resistance of diaphragm pumps for high pressure applica-
tions.

Chem-Tech Series 250 Selection Guide X25_ - __ - ___ Q XXX

MODELS: 3 = 76.8 gpd (12.11 lph) max pres.: 225 PSI (15.52 BAR)
4 = 108 gpd (17.03 lph) max pres.: 160 PSI (11.03 BAR)

ELECTRICAL: XD = 115V, 50/60 Hz, T.E.F.C.

XL = 230V, 50/60 Hz, T.E.F.C.

LIQUID END GFA = PVC / TFE (dbl) / Ceramic

MATERIALS:
CONNECTION Q = 44" PVC Suction / .50" PP Discharge
SIZES:

SUFFIX XXX = Standard

CODES:
A complete model should look like "X253-XD-GFAQXXX"
IMPORTANT NOTES:
1. KOPkits are not available for this model.
2. Shipping weight is 21 lbs.
STANDARD ACCESSORIES:
Models with tubing connections come with a footvalve/strainer/weight, 4' of suction tubing, 8' of discharge tubing, and an injection
valve.
Models with piping connections come with a strainer and an injection valve.

SERIES 250 PARTS PRICE SCHEDULE

Part No. Description Part No. Description
00006 Suction Tubing (per foot) 7/16" OD 29230 Motor Cover / 253 - 254
J00012 Polypropylene Tubing, 1/2" OD - Discharge (per foot) 29313 Pump Housing
00013 Polypropylene Tubing, 1/2" OD-Discharge (per ft) - Black 30460 Output Adjustment Knob
J20560 Ball Check, Ceramic 31084 Locking Lever
23705 Collar - Model 253 32545 Motor, 115/230V, 50/60 Hz, TEFC
23706 Collar - Model 254 34532 Oil Filler Plug with Cap
J24269 Oil (quart) 37084 Adjustment Screw
24820 Cord Assembly, 115V, 60Hz 37886 Diaphragm Shaft
24821 Cord, 230V, 50-60 Hz J41658 Back Check Valve Assy (PVC-HY-C-1/2")
J24960 Coupling Nut - PVC 1/2" J41667 Double Ball Check Valve Cart Assy (PVC 1/2") Suction
25681 Diaphragm Assembly - Model 253 41668 Double Ball Check Valve Cart Assy (PVC 3/8") Disch
25682 Diaphragm Assembly - Model 254 J41669 Double Ball Check Valve Cart Assy (PVC 1/2") Disch
J27903 Gasket, TFE J42020 Bolt Washer (4 required) SS
28220 Gear Housing Assembly - Model 253/254 J60729 Foot Valve & Strainer Assy (PVD-HY-C-1/2")
J28815 Pump Head, PVC - Model 253 J61272 Kit, 5 Function Valve incl L380KT03-PVC for Series X253
28816 Pump Head, PVC - Model 254 J61516 Kit, Head Mounting Bolts (4 - J37005, 4 - J42020)
J28919 Head Assembly, PVC - Model 253 - 1/2" J61518 Kit, Gasket TFE (4 - J27930)
28920 Head Assembly, PVC - Model 254 - 1/2"
 59

Mechanical Diaphragm Pumps

Series 300
Output adjustable from zero to maximum capacity without shutdown
Completely self-priming
Corrosion resistant solution-handling components
Pump assembly has lifetime lubricated mechanical components
Heavy duty plastic housing for increased corrosion resistance
Heavy duty speed reducer with oil sight gauge
Metal and fabric reinforced diaphragm for extra long life
Maximum operating pressure to 150 psi / 10 BAR

Note: Standard Features do not add to the pump price.

Remember that liquid end adders must be multiplied by the number of pump heads.
PLEASE ADD A CRATING FEE OF $50.00 NET PER PUMP WHEN SHIPPING AIR OR OCEAN FREIGHT.

Chem-Tech Series 300 Selection Guide ____ - __ - ___ _ ___

MODELS: X310 = SIMPLEX 500 gpd (78.83 lph) max pres.: 150 PSI (10 BAR)
X320 = DUPLEX 1000 gpd (157.71 lph) max pres.: 150 PSI (10 BAR)
X330 = TRIPLEX 1500 gpd (236.54 lph) max pres.: 150 PSI (10 BAR)
X340 = QUADRAPLEX 2000 gpd (315.42 lph) max pres.: 150 PSI (10 BAR)
313D = SIMPLEX 210 gpd (33.08 lph) max pres.: 150 PSI (10 BAR)
316D = SIMPLEX 430 gpd (67.79 lph) max pres.: 150 PSI (10 BAR)
323D = DUPLEX 420 gpd (66.21 lph) max pres.: 150 PSI (10 BAR)
326D = DUPLEX 860 gpd (135.63 lph) max pres.: 150 PSI (10 BAR)
ELECTRICAL: Series 300 Direct Drive Motor (models ending in D, i.e. 316D)
XT = 115/230V, 50/60 Hz, T.E.F.C.
Series 300 Motors (models beginning with an X, i.e. X320)
XA = 115V, 60 Hz, single phase, open
XB = 230V, 50 Hz, single phase, open
XC = 230V, 60 Hz, single phase, open
XD = 115V, 60 Hz, single phase, T.E.F.C.
XG = 220/440V, 50/60 Hz, 3 phase, open
XH = 220/440V, 60 Hz, 3 phase, T.E.F.C.
XI = 220/440V, 50/60 Hz, 3 phase, Explosion Proof
XJ = 115V, 60 Hz, single phase, Explosion Proof
XK = 115V, 50/60 Hz, 1/3 HP, TENV DC motor & SCR Controller, 4-
(X310 & X320 only)
XN = 220/440V, 50 Hz, 3 phase, T.E.F.C.
XX = No motor

LIQUID END PER HEAD

MATERIALS: BHA = PVC / CSPE / Ceramic
Pump Head & BHB = PVC / CSPE / TFE
Fittings/SeatsBCA = PVC / Viton / Ceramic
BCB
& O-rings/Balls = PVC / Viton / TFE
DHA = PP / CSPE / Ceramic
DHB = PP / CSPE / TFE
DCA = PP / Viton / Ceramic
DCB = PP / Viton / TFE
EFC = 304 / 304 / 316
* Diaphragms are all PTFE faced.
CONNECTION A = Tubing .44" PVC Suction / .50" PE Discharge
SIZES: X w/ PVC = Tubing .50" MNPT Suction / .50" MNPT Discharge
X w/ 316 = Tubing .50" MNPT Suction / .50" MNPT Discharge
SUFFIX XXX = Standard
CODES:
A completed model number should look like "X330-XD-AHAAXXX"
IMPORTANT NOTE: KOPkits not available for this model.
STANDARD ACCESSORIES:
Models with tubing connections come with a foot valve/strainer/weight, 4' of suction tubing, 8' of discharge tubing, and
an injection valve.
Models with piping connections come with a strainer and an injection valve.
60

SERIES 300 PARTS PRICE SCHEDULE

Part Number Description
00006 Suction Tubing (per foot) 7/16" OD - PVC
00008 Discharge Tubing Polyethylene (per foot) 1/2" OD
J20560 Ball Check (Ceramic)
20700 Base-Simplex
20843 Drive Bearing
20844 Main Shaft Bearing
20980 V-Belt
21407 Head Bolt, 1/4" - 20 x 2,2, Stainless Steel
21409 Head Bolt, 1/4" - 20 x 10,5, Stainless Steel
21821 Bracket
22253 Cam
23702 Locking Collar
J23723 Collar, Suction Swivel Assy
J24960 Coupling Nut, PVC 1/2" (Standard)
25712 Diaphragm, PTFE Coated
J26780 Injection Fitting
J27903 Gasket, TFE
27906 Gasket, Viton
28661 Belt Guard
J28814 Head, PVC
28809 SST Head 304
28813 Polypropylene Head
28939 Head Assembly, Acrylic (SAN-HY-C) 1/2"
28940 Head Assembly, PVC (PVC-HY-C)
29074 Polypropylene Head Assy
29107 SST Head Assy 304
29237 Housing Back Plate
29238 Pump, Housing Simplex
29297 Pump Housing, Assembly w/Fitting & Tubing (SAN-HY-C)
J30120 Reducer Input Shaft Key
30121 Main Shaft Key
30461 Output Adjusting Knob
32590 Motor (Standard) 1/3 hp, 115V, 60Hz ODP
32970 Adjusting Screw Lock Nut
33081 O Ring Seal - Hypalon
33761 Output Indicator Pin
35220 Pulley (4-step) - Motor
35221 Pulley (4-step) - Reducer
J35918 Speed Reducer 60:1
J36395 Cam Bearing Locking ring
J37440 Valve Seat, Hypalon
J37442 Valve Seat, Viton
37447 Valve Seat, Viton
37887 Main Shaft
37888 Output Adjusting Shaft
37889 Diaphragm Shaft
38982 Diaphragm Return Spring
38983 Valve Spring
39180 Sprocket - Motor
39181 Sprocket - Reducer
40087 Strainer Assembly - PP - HY - C - 1/2"
J41548 Valve Housing PVC 1/2"
41565 Valve Housing Discharge PVC
41566 Valve Housing Suction PVC
41568 Valve Seat, Suction - PVC
41637 Back Check Valve Assembly (PVC - HY - C - 1/2")
41638 Back Check Valve Assy (PVC - HY - C - 1/2")
41677 Valve Seat Suction Assembly
J61519 Kit, Gasket Hypalon (2 - 27905)
J61520 Kit, Valve Seat Hypalon (2 - 37446)
J61521 Kit, Acorn Nut Set (10 - 32960, 10 - 42022)
J61522 Kit, Output Indicator (2 - 37030, 1 - 34381)
J61523 Kit, Coupling Chain (1 - 24976, 1 - 33765, 1 - 36400)
J61526 Kit, Valve Components (2 - 37446, 2 - 27905, 2 - L1000500-ALA)
J61527 Kit, Suction Swivel Base (1 - 20705, 1 - 37040)
J61528 Kit, Head Bolt 2,2" (2 - 21407, 2 - 32960, 2 - 42022)
L1000500-ALA Ball Check - Ceramic
 61

Piston Pumps
Series 400
Precise metering over entire pressure and output range
Fully adjustable output capacities from 0 to 34 gph / 128.52 lph, depending on model*
Rugged piston design, corrosion resistant metals and solution handling components for the most severe applications
Heavy-duty plastic pump body for increase corrosion resistance
Operating pressures up to 800 psi / 55.17 BAR
Low maintenance design
Available in Simplex, or Duplex for multi-chemical feed
Metering adjustment accomplished without shutdown
*Actual feed rates will vary depending on solution viscosity and actual operating pressure

Note: Standard Features do not add to the pump price.

Remember that liquid end adders must be multiplied by the number of pump heads.
PLEASE ADD A CRATING FEE OF $50.00 NET PER PUMP WHEN SHIPPING AIR OR OCEAN FREIGHT.

Chem-Tech Series 400 Selection Guide X_ _ _ - _ _ - _ _ _ _ XXX

MODELS: Piston Diameter
405 = Simplex 1/4" 0.5 gph (1.89 lph) max pres.: 800 PSI (55.17 BAR)
406 = Duplex 1/4" 1.0 gph (3.76 lph) max pres.: 800 PSI (55.17 BAR)
409 = Simplex 3/8" 0.81 gph (3.06 lph) max pres.: 800 PSI (55.17 BAR)
410 = Duplex 3/8" 1.72 gph (6.50 lph) max pres.: 800 PSI (55.17 BAR)
413 = Simplex 1/4" 1.0 gph (3.78 lph) max pres.: 800 PSI (55.17 BAR)
414 = Duplex 1/4" 2.00 gph (7.56 lph) max pres.: 800 PSI (55.17 BAR)
417 = Simplex 3/8" 1.62 gph (6.12 lph) max pres.: 800 PSI (55.17 BAR)
418 = Duplex 3/8" 3.24 gph (12.25 lph) max pres.: 800 PSI (55.17 BAR)
425 = Simplex 1/2" 1.65 gph (6.24 lph) max pres.: 800 PSI (55.17 BAR)
426 = Duplex 1/2" 3.3 gph (12.47 lph) max pres.: 800 PSI (55.17 BAR)
429 = Simplex 5/8" 3.10 gph (11.72 lph) max pres.: 800 PSI (55.17 BAR)
430 = Duplex 5/8" 6.2 gph (23.44 lph) max pres.: 800 PSI (55.17 BAR)
433 = Simplex 1/2" 3.3 gph (12.47lph) max pres.: 800 PSI (55.17 BAR)
434 = Duplex 1/2" 6.6 gph (24.95 lph) max pres.: 800 PSI (55.17 BAR)
437 = Simplex 5/8" 6.2 gph (23.44 lph) max pres.: 800 PSI (55.17 BAR)
438 = Duplex 5/8" 12.4 gph (46.87 lph) max pres.: 800 PSI (55.17 BAR)
441 = Simplex 1" 8.5 gph (32.13 lph) max pres.: 300 PSI (20.69 BAR)
442 = Duplex 1" 17.0 gph (64.25 lph) max pres.: 300 PSI (20.69 BAR)
445 = Simplex 1" 17.0 gph (64.25 lph) max pres.: 300 PSI (20.69 BAR)
446 = Duplex 1" 34.0 gph (128.52 lph) max pres.: 300 PSI (20.69 BAR)

ELECTRICAL: XT = 115/230 V, 50/60 Hz, T.E.F.C.

LIQUID END PER HEAD Based on Piston Diameter

MATERIALS: <1"
Pump Head & EFA = 303 SS / TFE / Ceramic
Fittings/ EFC = 303 SS / TFE / 316 SS
Packing & Balls =1"
EFC = 304 SS / TFE / 316 SS
EFB = 304 SS / TFE / TFE

CONNECTION X = < 1" 1/4" FNPT Suction / 1/4" FNPT Discharge

SIZES: X = ≥ 1" 1/2" FNPT Suction / 1/2" FNPT Discharge

SUFFIX XXX = Standard

CODES:
A completed model shold look like "X413-XT-EFAXXXX"
62

Piston Pumps
Series 500
Completely adjustable while running
Easily field calibration
Materials of construction for metering chemicals for industrial and agricultural uses
Consistent repeatability of output
Easy maintenance due to interchangeability or most wetted components
Available in Simplex or Duplex configurations
Wide range of output and pressure capability

Note: Standard Features do not add to the pump price.

Remember that liquid end adders must be multiplied by the number of pump heads.
PLEASE ADD A CRATING FEE OF $50.00 NET PER PUMP WHEN SHIPPING AIR OR OCEAN FREIGHT.

Chem-Tech Series 500 Selection Guide X_ _ _ - _ _ - _ _ _ X XXX

MODELS: Piston Diameter
541 = Simplex 1" 6.97 gph (26.38 lph) max pres.: 500 PSI (34.48 BAR)
542 = Duplex 1" 13.95 gph (52.76 lph) max pres.: 500 PSI (34.48 BAR)
545 = Simplex 1" 13.7 gph (51.85 lph) max pres.: 500 PSI (34.48 BAR)
546 = Duplex 1" 27.41 gph (103.71 lph) max pres.: 500 PSI (34.48 BAR)
548 = Simplex 1" 27.65 gph (104.65 lph) max pres.: 500 PSI (34.48 BAR)
572 = Duplex 1" 55.30 gph (209.31 lph) max pres.: 500 PSI (34.48 BAR)
551 = Simplex 1 1/4" 10.89 gph (41.24 lph) max pres.: 300 PSI (20.69 BAR)
552 = Duplex 1 1/4" 21.78 gph (82.48 lph) max pres.: 300 PSI (20.69 BAR)
553 = Simplex 1 1/4" 21.41 gph (81.06 lph) max pres.: 300 PSI (20.69 BAR)
554 = Duplex 1 1/4" 42.82 gph (162.12 lph) max pres.: 300 PSI (20.69 BAR)
559 = Simplex 1 1/4" 43.20 gph (163.54 lph) max pres.: 300 PSI (20.69 BAR)
560 = Duplex 1 1/4" 86.40 gph (327.08 lph) max pres.: 300 PSI (20.69 BAR)
561 = Simplex 1 1/2" 15.69 gph (59.38 lph) max pres.: 200 PSI (13.79 BAR)
562 = Duplex 1 1/2" 31.38 gph (118.77 lph) max pres.: 200 PSI (13.79 BAR)
563 = Simplex 1 1/2" 30.83 gph (116.69 lph) max pres.: 200 PSI (13.79 BAR)
564 = Duplex 1 1/2" 61.66 gph (233.38 lph) max pres.: 200 PSI (13.79 BAR)
569 = Simplex 1 1/2" 62.21 gph (235.46 lph) max pres.: 200 PSI (13.79 BAR)
570 = Duplex 1 1/2" 124.42 gph (470.93 lph) max pres.: 200 PSI (13.79 BAR)

ELECTRICAL: XA = 115V, 60 Hz, single phase, open

XB = 230V, 50 Hz, single phase, open
XC = 230V, 60 Hz, single phase, open
XD = 115V, 60 Hz, single phase, T.E.F.C.
XG = 220/440V, 50/60 Hz, 3 phase, open
XH = 220/440V, 60 Hz, 3 phase, T.E.F.C.
XI = 220/440V, 50/60 Hz, 3 phase, Explosion Proof
XJ = 115V, 60 Hz, single phase, Explosion Proof
XN = 220/440V, 50 Hz, 3 phase, T.E.F.C.

LIQUID END PER HEAD Based on Piston Diameter

MATERIALS: =1"
Pump Head & EFC = 304 SS / TFE / 316 SS
Fittings/ EFB = 304 SS / TFE / TFE
Packing & Balls =1 1/4"
EFC = 304 SS / TFE / 316 SS
EFB = 304 SS / TFE / TFE
=1 1/2"
EFC = 304 SS / TFE / 316 SS
EFB = 304 SS / TFE / TFE
CONNECTION X = < 1" 1/4" FNPT Suction / 1/4" FNPT Discharge
SIZES: X = ≥ 1" 1/2" FNPT Suction / 1/2" FNPT Discharge

SUFFIX XXX = Standard

CODES:
A completed model number should look like "X545-XJ-EFCXXXX"
 63

SERIES 400 and SERIES 500 PARTS

SERIES 400 PARTS
Part Number Description Part Number Description
J20723 Pump Base (Simplex) F-PUMP HEAD
20703 Pump Base (Duplex) 28821 1/4" Bore Stainless Steel S-Series
20845 Main bearing (closed) 28823 3/8" Bore Stainless Steel S-Series
21965 Main Shaft Motor Bushing 28825 1/2" Bore Stainless Steel S-Series
21964 Outboard Bearing 28826 5/8" Bore CRS
26810 Grease Relief Fitting 28827 5/8" Bore Stainless Steel S-Series
26811 Grease Fitting J24960 Coupling Nut (2 req)
28200 Gear/Shaft Assy - 30RPM, 115V OPD Simp J41667 Double Ball Check Valve Cartridge (Suction)
28202 Gear/Shaft Assy - 60 RPM, 115V OPD Simp J41669 Double Ball Check Valve Cartridge (Discharge)
29246 Housing Set Assy S400 Simplex & Duplex
29249 Housing Set Assy S400 Duplex SERIES 500 PARTS
30125 Main Shaft Key 20579 SS Ball 7/16" (2 req)
32632 Motor Assy w/Shaft 60 RPM 115V ODP-Simp 20580 SS Ball 11/16" (2 req)
32634 Motor Assy w/Shaft 30 RPM 115V ODP-Dup 20704 S500 Base (Simplex or Duplex)
32645 Motor Assy w/Shaft 60 RPM 115V ODP-Dup 21970 Bronze Bushing
32646 Motor Assy w/Shaft 30 RPM 115V ODP-Simp 25004 Delrin Motor Coupling Assy
32648 Shaft Assy, Coupled 29290 Housing Set Assy 115 SPM Simplex-Duplex
J32749 MTR, 30 RPM 115/230V TEFC 29291 Housing Set Assy 115 SPM Duplex
J32750 MTR, 60 RPM 115/230V TEFC 29247 Housing Set Assy S500 Simplex-Duplex
J32943 Mounting Nut (4 req) 29248 Housing Set Assy S500 Duplex
32971 Adjustment Screw Lock Nut 32590 Motor 1/3" HP 56 FR, 115V, Open
33764 Slide Pin 33082 O-Ring, Head Cap, VT-1,859 x ,139
36396 Main Shaft Locking Ring 33083 O-Ring, Head Cap, VT-2,359 x ,139
J37054 Set Screw 1/4" - 20 x 3/4" 33767 Pin - Suction Check Valve
37090 Adjustment Screw J35913 Speed Reducer, 115 SPM
37305 PVC Seal (2 req) J35916 Speed Reducer, 57 SPM
37891 Main Shaft (Duplex) J35918 Speed Reducer, 29 SPM
38221 Slide (Simplex / Duplex) 37053 Piston Set Screw
38224 Slide Arm Assembly (Simplex) 37306 PVC Seal (2 req)
38225 Slide Arm Assembly (Duplex) 38710 Spacer, packing 1"
38988 Valve Spring (2 req) 38711 Spacer, packing 1-1/4"
41672 Discharge Check Valve Assy 1/4" FPT 38712 Spacer, packing 1-1/2"
41674 Suction Check Valve Assy 1/4" FPT 38986 Spring-Packing Compression 1"
J61530 Kit, Main Shaft (Simp, TEFC) (1 - 37899, 38987 Spring-Packing Compression 1-1/4" & 1-1/2"
3 - D4844-31) 38989 Valve Spring
J61531 Kit, Main Bearing Cam (1 - 22263, 1 - 33771) 41673 Discharge Check Valve Assy 1/2" FPT
J61532 Kit, Housing Set Hdwe (2 - 21407, 2 - 21406, 41675 Suction Check Valve Assy 1/2" FPT
2 - 42022, 2 - 42035, 4 - 32942) J61523 Kit, Coupling Chain (1 - 24976, 1 - 33765, 1 - 36400)
L1000400-ALA Ceramic Ball 1/4" (2 req) J61531 Kit, Main Bearing Cam (1 - 22263, 1 - 33771)
L1000500-ALA Ceramic Ball 3/8" (2 req) J61536 Kit, Coupling Shaft (1 - 24984, 1 - 37059, 1 - 37047)
A-PISTON HEAD ASSEMBLY J61537 Kit, Main Shaft (1 - 30121, 1 - 37894)
28925 5/8" Bore CRS G-SERIES 500 PUMP HEAD
28929 5/8" Bore Stainless Steel 28829 1" Bore Stainless Steel S-SERIES
28930 1/2" Bore Stainless Steel 28831 1-1/4" Bore Stainless Steel S-SERIES
28931 3/8" Bore Stainless Steel 28831 1-1/2" Bore Stainless Steel S-SERIES
28932 1/4" Bore Stainless Steel G-SERIES 500 PUMP HEAD CAP
B-PISTON 28841 1" Stainless Steel
34180 1/4" Diameter 303 SS 28843 1-1/4" & 1-1/2" Stainless Steel
34182 3/8" Diameter 303 SS H-SERIES 500 PISTON
34184 1/2" Diameter 303 SS 34188 1" Diameter 303 SS
34186 5/8" Diameter 303 SS 34189 1-1/4" Diameter 303 SS
C-PACKING NUT 34190 1-1/2" Diameter 303 SS
32972 1/4" Bore I-SERIES 500 PACKING SET
32973 3/8" Bore 33424 1" Bore (Neoprene - Standard)
32974 1/2" Bore 33425 1-1/4" Bore (Neoprene - Standard)
32975 5/8" Bore 33426 1-1/2" Bore (Neoprene - Standard)
D-PACKING SET 33431 1" Bore (TFE - Optional)
33420 1/4" Bore (Neoprene - Standard) 33432 1-1/4" Bore (TFE - Optional)
33421 3/8" Bore (Neoprene - Standard) 33433 1-1/2" Bore (TFE - Optional)
33422 1/2" Bore (Neoprene - Standard) J-SERIES 500 PISTON HEAD ASSEMBLY
33423 5/8" Bore (Neoprene - Standard) 28934 1" Bore Stainless Steel
33427 1/4" Bore (TFE - Optional) 28935 1-1/4" Bore CRS
33428 3/8" Bore (TFE - Optional) 28936 1-1/4" Bore Stainless Steel
33429 1/2" Bore (TFE - Optional) 28937 1-1/2" Bore CRS
33430 5/8" Bore (TFE - Optional) 28938 1-1/2" Bore Stainless Steel
E-GREASE GLAND
28380 1/4" Bore *Series 400-500 1" parts are interchangeable.
28380 3/8" Bore
28381 1/2" Bore
28381 5/8" Bore
64

DIAPHRAGM PUMPS
STINGRAY Series 100 & 200
Versatility: range of models, offering feed rates from 8 GPD to 90 GPD, and operating pressures up to
100 PSI
Durability: rugged, chemical-resistant plastic casing, and corrosion-resistant rubber and plastic solution
handling components
Long Life: PTFE coated diaphragm and viton seals, for long life even in highly corrosive
applications
Reliability: spring-loaded check valves for high reliability.

Mec-O-Matic STINGRAY 100 and 200 Series Selection Guide US_ _ _ _ _ - BCA K XXX
MODELS: Series 100
105 = 8.0 gpd (1.26 lph) max pres.: 100 PSI (6.90 BAR)
110 = 12.0 gpd (1.89 lph) max pres.: 100 PSI (6.90 BAR)
125 = 30.0 gpd (4.73 lph) max pres.: 100 PSI (6.90 BAR)
150 = 60.0 gpd (9.46 lph) max pres.: 100 PSI (6.90 BAR)
175 = 90.0 gpd (14.19 lph) max pres.: 60 PSI (4.14 BAR)
Series 200
205 = 8.0 gpd (1.26 lph) max pres.: 100 PSI (6.90 BAR)
210 = 12.0 gpd (1.89 lph) max pres.: 100 PSI (6.90 BAR)
225 = 30.0 gpd (4.73 lph) max pres.: 100 PSI (6.90 BAR)
250 = 60.0 gpd (9.46 lph) max pres.: 100 PSI (6.90 BAR)
275 = 90.0 gpd (14.19 lph) max pres.: 60 PSI (4.14 BAR)

ELECTRICAL: XA = 115V, 60 Hz

LIQUID END BCA = PVC / Viton / Ceramic

MATERIALS:

CONNECTION K = Tubing .38" PVC Suction / .38" PE Discharge

SIZES:

SUFFIX XXX = Standard

CODES:
A completed model should look like "US110XA-BCAKXXX"

1. Maximum GPD Rating is at Zero PSI.

2. Standard material of construction is: PVC head/fittings, Viton Seats, PTFE faced diaphragm, spring loaded ceramic balls, 4 ft. 3/8"
PVC suction tubing, 8 ft. 3/8" polyethelene discharge tubing.
3. KOPkit includes head assembly, diaphragm and head screws.
4. Shipping weight is 8 lbs

STINGRAY Electro Mechanical Series

Mec-O-Matic STINGRAY ELECTRO MECH. Selection Guide US_ _ _ _ XA BCA K XXX
MODELS: 105 = 8.0 gpd (1.26 lph) max pres.: 100 PSI (6.90 BAR)
110 = 12.0 gpd (1.89 lph) max pres.: 100 PSI (6.90 BAR)
205 = 8.0 gpd (1.26 lph) max pres.: 100 PSI (6.90 BAR)
210 = 12.0 gpd (1.89 lph) max pres.: 100 PSI (6.90 BAR)
TIMER: D = 24 Hour Timer
W = 7 Day Timer

ELECTRICAL: XA = 115V, 60 Hz
LIQUID END BCA = PVC / Viton / Ceramic
MATERIALS:

CONNECTION K = Tubing .38" PVC Suction / .38" PE Discharge

SIZES:

SUFFIX XXX = Standard

CODES:
A completed model should look like "US110DXABCAKXXX"
1. Available in 115V 60 cycle only.
2. Maximum GPD Rating is at Zero PSI.
3. Standard material of construction is: PVC head/fittings, Viton Seats, PTFE faced diaphragm, spring loaded ceramic balls, 4 ft. 3/8"
PVC suction tubing, 8 ft. 3/8" polyethelene discharge tubing.
 65

KOPkits
Mec-O-Matic STINGRAY KOPkit Selection Guide KUSR_ - BCA K
PRODUCT DESIGNATOR: 1 = Series 100
2 = Series 200

LIQUID END MATERIALS: BCA = PVC / Viton / Ceramic

Head, Diaph., Seats & Balls
CONNECTION : K = Tubing .38" PVC Suction / .38" PE Discharge

STINGRAY SERIES PARTS PRICE SCHEDULE

Part No. Description Part No. Description
41403 Discharge Tubing 8 ft PE 3/8" U8800656 Kit, SR Drive Block Conversion
J41424 Suction tubing 4 ft PVC 3/8" U8800701 Head Assembly Series 100
U0810545 Spring Clutch U8800703 Head Assembly Series 200
U0811279 Pump Head Series 200 U8800704 Valve Kit Series 200 (viton)
U0817888 Shoulder Screw 10 - 24 X ,58 U8800729 Kit, Head Bolt S100 (4 - U0810036, 4 - L9801300-188)
U0811861 Head Cover Series 100 U8800730 Kit, Head Bolt S200 (4 - U0813501, 4 - L9801300-188)
U0812318 Pump Head Series 100 U8800732 Kit, Foot Pads (4 - U0818379)
U0814211 Compression Nut U8800735 Kit, Spring (2 - U0812915)
U0818143 Drive Block L9900700-000 Strain Relief
U0818148 Drive Plate U0818406 Motor, SR 105/205, 120V, 60Hz
U0818215 Motor Housing U0818407 Motor, SR 105/205, 240V, 50/60Hz
U0818226 Regulator Housing U0818408 Motor, SR 110/210, 120V, 60Hz
U0818227 Regulator Top Cover U0818409 Motor, SR 110/210, 240V, 50/60Hz
U0818256 Output Adjustment Knob U0818410 Motor, SR 125/225, 120V, 60Hz
U0818257 Wear Plate U0818411 Motor, SR 125/225, 240V, 50/60Hz
U0818258 Adjustment Knob Bushing U0818412 Motor, SR 150/250, 120V, 60Hz
U0818339 Adjustment Plate U0818413 Motor, SR 150/250, 240V, 50/60Hz
U0818340 Adjustment Shaft Assembly U0818414 Motor, SR 175/275, 120V, 60Hz
U8800412 Tubing Assy, 15', 3/8" U0818415 Motor, SR 175/275, 240V, 50/60Hz
U8800456 Foot Valve Strainer 3/8" OD Tubing (viton) 24820 Power Cord 120V
U8800470 Diaphragm Kit 24821 Power Cord 240V
U8800525 Relief/Release Plunger Kit (viton) U0818561 Timer Assy, 24 hr (SR Electro Mech)
U8800554 Cartridge Valve Kit Series 100 (viton) U0818562 Timer Assy, 7 Day (SR Electro Mech)
U8800606 Injection Fitting U0818564 Motor Fan SR 105, 110, 205, 210

MISCELLANEOUS TUBING
Part No. Description Part No. Description
U0811307 Tube PE, Transparent, 1/4" OD X 100 ft. U0818324 Viton Peri. Tube, 3/8" OD X 9"
J41447 Tube PE, White, 3/8" OD X 100 ft. U0818654 Nozzle Assembly
U0818134 Viton Peri. Tube, 7/16" OD X 9" U0818994 Tube PE, Black, 1/4" OD X 15 ft.

WAREWASH PUMPS
Series T-2000 Misting System
Consistent misting pattern for maximum effectiveness.
Diaphragm metering pump provides capacity of 180cc/6 oz. per minute at 100 PSI.
Wide angle misting nozzle provides optimum pattern.

Mec-O-Matic Series T-2000 Selection Guide US275 XA - BCXX112

MODELS: US275 = 6 oz. per minute max pres.: 100 PSI (6.90 BAR)
ELECTRICAL: XA = 115V, 60 Hz
LIQUID END BCXX112 = PVC / Viton / Ceramic
MATERIALS:

1. Standard system includes SR275 pump, 24 hour timer, spray nozzle and tubing in a lockable metal cabinet with an industrial gray
finish.
2. Available in 115 volt only.
66

PERISTALTIC PUMPS
Dolphin Series
Exclusive quick-release, twist-off, clear polycarbonate, acid-resistant head to withstand
the harshest environment.
Self-lubricating chemical resistant roller assembly.
Durable, long lasting tubing with no tube adjustment.
Rugged and dependable – Heavy-duty shaded pole gearmotor with lifetime lubrication.
Flexibility in feed rates - from .13 gallons to 97 gallons per day ... to meet the demands
of the pool and spa industry, and elsewhere.
Agency approvals.

Mec-O-Matic DOLPHIN Series Selection Guide UD_ _ - _ _ - ___ U XXX

MODELS: 10 = 13.0 gpd (2.05 lph) max pres.: 25 PSI (1.72 BAR)
50 = 60.0 gpd (9.46 lph) max pres.: 25 PSI (1.72 BAR)
75 = 97.0 gpd (15.30lph) max pres.: 25 PSI (1.72 BAR)

ELECTRICAL: XA = 115V, 60 Hz
XL = Standard 230V, 50/60 Hz, used w/ Model 10 only
XB = Standard 230V, 50 Hz, used w/ Models 50 & 75 only
XC = Standard 230V, 60 Hz, used w/ Models 50 & 75 only

LIQUID END LSA = Norprene Tubing

MATERIALS: LBA = Viton Tubing

CONNECTION U = Tubing .25" I.D. X .44" O.D.

SIZES:
SUFFIX XXX = Standard
CODES:
A completed model should look like "UD75-XA-LBAUXXX"
Mec-O-Matic DOLPHIN KOPkit Series Selection Guide
KUDXX-LSAU = Standard KOPkit for all Dolphin Pumps (includes head& tube assembly

Junction Box option is available on 230V models at no additional charge. Contact the factory for model numbers.
Shipping weight for Dolphin Pumps is 7 lbs.

KOPkits
Mec-O-Matic DOLPHIN KOPkit Selection Guide KUDXX - _ _ _ _
PRODUCT DESIGNATOR: KUDXX = Dolphin Kopkit
LIQUID END MATERIALS: LSAU = Norprene Tubing CRM
LLAU = Norprene Tubing BLK
LBAU = Viton Tubing

DOLPHIN SERIES PARTS PRICE SCHEDULE

Part No. Description Part No. Description
J60552 Strainer Assembly w/o valve U0818616 Gearmotor Assembly, 120V, 10 RPM - D10
24820 Power Cord 120V U0818617 Gearmotor Assembly, 240V, 10 RPM - D10
24821 Power Cord 240V U0818618 Gearmotor Assembly, 120V, 50 RPM - D50
U0817630 Lead Assembly U0818619 Gearmotor Assembly, 240V, 50 RPM - D50
U0817635 Knob U0818620 Gearmotor Assembly, 120V, 75 RPM - D75
U0817923 Switch, Rocker U0818621 Gearmotor Assembly, 240V, 75 RPM - D75
U0817942 Screw 10 - 32 X .688", Motor Mount U8800431 Tubing cut 1/4" X 15 ft. PE
U0819142 Box, Front U8800637 Tubing Replacement Kit (7/16"Norprene Crm)
U0819143 Box, Back U8800651 Pump Head Assembly
U0818180 Potentiometer Assembly U8800712 Injection Fitting
U0818564 Fan D10 (CW) U8800740 Kit, Timer 120V (1 - U0818183, 1 - U0020522)
U0818565 Fan D50, D75 (CCW) U8800741 Kit, Timer 240V (1 - U0818460, 1 - U0020522)
U0812955 Screw 8 - 32 X 1/4", Fan U8800742 Kit, Pump Head Bearings (2 - U0817121)
L9900700-000 Strain Relief U8800743 Kit, Collars (2 - U0817123)
U8800758 Kit, Pump Head Tubing (Viton)
 67

PERISTALTIC PUMPS
VSP Series
Versatile - The VSP is engineered to dispense low volumes of chemicals at exact-
ing amounts.
Reliable – Heavy-duty gearmotor... fieldtested, proven peristaltic head... durable
chemical-resistant housing.
Low Maintenance – Self-lubricating roller assembly... NO tube adjustment re-
quired... exclusive quick-release, twist-off head.
Guaranteed – Full one year warranty on dispenser.

Mec-O-Matic VSP Series Selection Guide UVSP_ _ __ ___ U XXX

MODELS: 12 = 12.0 gpd (1.89 lph) max pres.: 25 PSI (1.72 BAR)
20 = 20.0 gpd (3.15 lph) max pres.: 25 PSI (1.72 BAR)
ELECTRICAL: XP = 24VAC
XR = 120V 50/60 Hz
LIQUID END LLA = Norprene Tubing
MATERIALS: LBA = Viton Tubing
CONNECTION U = Tubing .19" I.D. X .38" O.D. used w/ UVSP12 only
SIZES: U = Tubing .25" I.D. X .44" O.D. used w/ UVSP20 only
SUFFIX XXX = Standard
CODES:
A completed model should look like "UVSP12XRLLAUXXX"
Shipping weight for all VSP pumps is 6 lbs.

VSP SERIES PARTS PRICE SCHEDULE

Part Number Description
J60552 Strainer w/o Valve
U0817122 Collar VSP - 12
U0817123 Collar VSP - 20
U0817742 Hose Clamps
U0817923 Switch
24820 Power Cord 120 V
U0819142 Front Housing
U0819143 Rear Assembly
L9710200-000 Lead Assembly
U0818083 Hole Plug
U0818305 Printed Circuit Board 24V
U0818306 Printed Circuit Board 120V
U0818320 Power Cord 24V
U0818463 Fuse 24V, 1/2 Amp
U0818464 Fuse 120V, 1/8 Amp
U0818667 Gearmotor Kit
U7013397 Tube Kit VSP - 20
U8800431 15" X 1/4" Poly Tubing
U8800651 Pump Head Kit
U8800700 Tube Kit VSP - 12
U8800712 IPF Auto Clean Injection Fitting
U8800739 Kit, Motor Mount (2 - U0818666, 2 - 32946, 2 - U0811297)
U8800742 Kit, Pump Head Bearings (2 - U0817121)
L9900700-000 Strain Relief
68

PERISTALTIC PUMPS
Series 2400T Grease Trap Dispenser
Capable of Dispensing Low Volumes
Programmable
Simple Installation
Prime Push Button for Quick Start-Up
Quick Release Twist Off Head
Built-In Timer
No Tube Adjustment Needed
Self Lubricating Roller Assembly

Mec-O-Matic 2400T Series Selection Guide UT24 ___ - __ _U ___

MODELS: UT24 = 2.5 gpd (0.39 lph) max pres.: 25 PSI (1.72 BAR) used w/ 2400T & 2400T PLUS
UT24 = 3.0 Oz / 1 Min max pres.: 25 PSI (1.72 BAR) used w/ 2400T-DC only
ELECTRICAL: -XA = 115V, 60 Hz used w/ 2400T only
PXA = 115V, 60 Hz used w/ 2400T PLUS only
-AD = 12V DC used w/ 2400T-DC only

LIQUID END LT = Silicone Tubing

MATERIALS: LB = Viton Tubing
LL = Norprene Tubing used w/ 2400T-DC only
CONNECTION AU = Tubing .125" I.D. X .31" O.D.
SIZES: XU = Tubing .25" I.D. X .44" O.D. used w/ 2400T-DC only
SUFFIX XXX = Standard
CODES: 109 = Lockable Latch Cover used w/ 2400T PLUS only
A completed model should look like "UT24-XA-LBAUXXX"
1. 2400T comes standard with 24 hour mechanical timer. 2400T plus and DC utilizes a 7 day, 8 event programmable timer
2. 2400T DC Pump requires 8 "D" cell batteries (not included).
3. Shipping weight is 7.5 lbs.

2400T & T PLUS SERIES PARTS PRICE SCHEDULE

Part No. Description Part No. Description
J60552 Strainer Assembly w/o Valve U0819143 Pump Housing (rear)
U0814047 Wire Clip U0818061 Toggle Switch
U0817131 Tubing Assy 5/16" X 9" Silicone U0818084 Lead Assembly 4.5" Yellow (2) Timer
U0817133 Pump Cover (Backing Plate) U0818564 Fan
U0817742 Hose Clamp U0818602 Gearmotor Assembly
U0817888 Pump Head Screw U0818740 Timer (2400T Plus)
U0817942 Screw 10 - 30 X .688", Motor Mount U8800431 15' X 1/4" PE Tubing
U0817952 Timer (2400T) U8800712 Injection Fitting
U0818018 Indicator Light U8800753 Pump Head Assembly Kit (No Tubing)
U0819145 Pump Housing (front-2400T Plus) U0812955 Hex Screw 8 - 32 X 1/4"
U0819144 Pump Housing (front-2400T) L9900700-000 Strain Relief

2400T DC SERIES PARTS PRICE SCHEDULE

Part No. Description Part No. Description
U0812955 Screw 6 - 32 X .25" PHP U0818902 Battery Holder Assembly
U0817888 Shoulder Screw U0818903 Low Battery Board Assembly
U0818026 Spacer SST (Motor) U0818904 Ground Wire Connection
U0818061 Toggle Switch U0819037 12V DC Timer LO AMP
U0818666 Screw 8 - 32 X 1.25 FHP U8800490 Injection Fitting
U0818881 12V DC Motor U8800637 7/16" Tubing Kit (Peristaltic)
U0818888 PVC Spacer (Timer) U8800651 Pump Head Assembly Kit (No Tubing)
U0818895 1/4" X 20' Tubing PE U8800700 3/8" Tubing Kit
U0818897 Housing Assembly w/lock U8800742 Kit, Pump Head Bearings (2 - U0817121)
U0818901 Lock Nuts (10-24 NY - Lock)
 69

Policies and Procedures

1. Manufacturer’s Equipment Warranty
a. Pulsafeeder warrants all pumps and controllers of its manufacture to be free of defects in material or workmanship. Liability un-
der this policy extends for 24 months from date of shipment from the factory. The manufacturer‟s liability is limited to repair or
replacement of any failed equipment or part which is proven defective in material or workmanship upon manufacturer‟s examina-
tion. This warranty does not include removal or installation costs and in no event shall the manufacturer‟s liability exceed the
selling price of such equipment or part.
b. The manufacturer disclaims all liability for damage to its products through improper installation, maintenance, use or attempts to
operate such products beyond their functional capacity, intentionally or otherwise, or any other unauthorized repair. The manu-
facturer is not responsible for consequential or other damages, injuries or expense incurred through the use of its products.
c. The above warranty is in lieu of any other warranty, whether expressed or implied. The manufacturer makes no warranty of
fitness or merchantability. No agent of ours is authorized to provide any warranty other than the above.
2. Pulsafeeder’s Parts and Accessory Warranty
a. Pulsafeeder, Inc. warrants parts and accessories provided to be free of defects in material or workmanship. Unless otherwise
noted below, liability under this policy extends for 90 days from date of shipment from the factory when sold as service parts.
(Replaceable elastomeric parts are expendable and are not covered by any warranty either expressed or implied.)
b. This policy is extended to a full 12 months from the date of installation or 18 months from shipment from the factory whichever
comes first on the following accessories;
Intelliscan
Digital Glycol Feeders
Analog Timers
Water Meters
Flow Controllers
c. MicroTrac and MicroVision toroidal probes are warranted for 24 months from date of shipment from the factory when purchased
in conjunction with the controller.
All other electrodes/probes and sensors are considered maintenance items and such are warranted for six (6) months from the
date of shipment when purchased in conjunction with the controller.
Any electrodes/probes and sensors purchased as spare parts are warranted for 90 days from date of shipment.
d. The manufacturer‟s liability is limited to repair or replacement of any failed equipment or part which is proven defective in mate-
rial or workmanship upon manufacturer‟s examination. This warranty does not include removal or installation costs and in no
event shall the manufacturer‟s liability exceed the selling price of such equipment or part.
e. The manufacturer disclaims all liability for damages to its products through improper installation, maintenance, use or attempts
to operate such products beyond their functional capacity, intentionally or otherwise, or any unauthorized repair. The manufac-
turer is not responsible for consequential or other damages, injuries or expense incurred through the use of its products.
f. The above warranty is in lieu of any other warranty, whether expressed or implied. The manufacturer makes no warranty of
fitness or merchantability. No agent of ours is authorized to provide any warranty other than the above.
3. Process for All Returned Goods
a. Please contact our Customer Service Department to request a RMA (Return Material Authorization) number prior to returning
any goods. The following information will be required:
Billing and ship-to address
Model number and serial number
Contact name and phone number
Reason for return
Purchase order (where applicable)
A packing slip will be provided to the shipper and MUST accompany the product being returned. Packages received without our
proper packing list will be refused by the receiver.
b. All material must be returned freight prepaid.
c. All material must be properly packaged to prevent damage in shipment.
d. All products MUST be wiped and flushed clean of any and all chemicals, solvents or buffers and be warranted to be safe for
handling. You will be requested to acknowledge the condition of the product being returned on our packing list. Any product
received that is deemed to be unsafe for handling or without this acknowledgement will be refused by our receiver.
e. RMA for returning product for credit is effective for 90 days from the date of issue. After 90 days if the product has not been
returned to Pulsafeeder the RMA number will be cancelled, and a new request must be made by the customer to continue with
the return procedure.
4. Non-Warranty Return Procedure
a. If you are experiencing a concern with your Pulsafeeder product, first consult the distributor, dealer or Regional Sales Manager
or the operation and maintenance manual for assistance. If service of your non-warranty unit is necessary, you must request a
return material authorization. A RMA form will be issued and must be used as the packing list attached to the outside of the box.
Please send the unit freight prepaid with the RMA number visibly displayed on the outside of the carton. All products MUST be
wiped and flushed clean of any and all chemicals, solvents or buffers and be warranted to be safe for handling. You will be re-
quested to acknowledge the condition of the product being returned on our packing list. Any product received that is deemed to
be unsafe for handling or without this acknowledgement will be refused by our receiver.
b. The charges listed in the following table will apply.

Product Repair Cost

Pumps and Pump Accessories – within 5 years of sale date Current List Price x .50 x Part Discount Multiplier

Controllers and Controller Accessories within 5 years of sale date Current List Price x .50 x Part Discount Multiplier

With purchase order, $50 bench fee to evaluate. The $50 bench fee may be applied towards
Any item older than 5 years from date of sale
repair cost of unit or towards a new controller

c. Extended warranty on repair goods will be offered only when the repairs were made by the factory on non-warranty units.
i. Microprocessor Controls – 1 year from date of shipment
ii. Electronic Controls – 6 months from date of shipment (excluding electronic parts)
iii. Standard metering pumps – 3 months from date of shipment
70

Policies and Procedures continued

5. Credit for Return of New, Unused Equipment
a. No equipment will be accepted beyond six months after date of shipment from factory for credit.
b. Only new, unused and undamaged standard equipment will be accepted for return to stock.
c. All credits are based on evaluation and acceptance of material as new and unused by Pulsafeeder. You will be requested to
acknowledge the condition of the product being returned on our packing list. Any product received that is deemed to be unsafe
for handling or without this acknowledgement will be refused by our receiver.
d. A restocking fee of 25% will apply to returned goods. When a PO is provided for a replacement item at the time of the return
request the restocking fee will be 15%. Note: any product mounted on a panel or skid will be charged a 50% re-stocking fee.
e. A request for a Returned Material Authorization (RMA) number must be made prior to returning product to Pulsafeeder.
f. All equipment shall be returned with the RMA Packing List form attached to the outside of the box.
g. If any chemical, solvent or buffer has been introduced into the product it must be wiped and flushed clean of any and all sub-
stances prior to returning to Pulsafeeder.
h. All material shall be returned freight prepaid.
i. Private label products or Engineered Panel Mount Systems are not returnable.

6. Pricing Errors
a. Pulsafeeder does their very best to avoid errors in billing. You will receive a confirmation of your order within 24 hours of order
entry. If upon review the customer feels there is a discrepancy, they should contact Pulsafeeder Customer Service as soon as
possible to resolve.
b. Should an invoice be received that the customer believes to have incorrect pricing, they should notify Pulsafeeder Customer
Service to investigate.
7. Missing Items
a. If a product is received by the customer with an item missing the customer must notify Pulsafeeder Customer Service within 7
days of receipt of the product by the end user. A replacement item will be sent at no charge as quickly as possible.
b. If a shipment is received by the customer with a line item missing they must notify Pulsafeeder Customer Service within 7 days
of receipt of the product by the end user. If the customer had been billed for that item, a credit will be issued against the original
Sales Order and a new Sales Order will be created for the replacement product.
8. Damaged Items
a. Should the customer receive an order that was damaged in transit, the customer must notify the carrier directly to initiate a claim
on the day of delivery.
b. Should the customer receive a product with damaged components due to improper packaging they should notify Pulsafeeder
Customer Service within 7 days of receipt of product by end user. A replacement item will be sent at no charge as quickly as
possible.
9. Technical Support Services Available
a. Pulsafeeder‟s Technical Sales Support team is available to provide all your sales and support needs. The principle mission of
this group is to sell and support our customer base in a timely and effective manner. This includes the ability to provide in-field
service training, assistance in start-up of our products and perform field repair of goods when required.
b. Scope
Pulsafeeder, Inc. factory Field Service Technicians are available throughout the World for field services on all Pulsafeeder prod-
ucts. Services include:
i. Maintenance Training Seminars, including Classroom slide presentations and or Hands-on Training. The seminar will
take approximately four to five hours, and if time permits minor repair and or adjustments may be made to the cus-
tomer‟s pumps, controllers or accessories.
ii. Pre-start up inspections and start up testing/calibration of pumps, controllers and accessories.

Fee Schedule Service Rate (1)

Field Repairs and Start-ups
Normal 8 hour day $98.00/hour
Overtime (in excess of 8 hrs, each day) $148.00/hour
Sundays, National Holiday $195.00/hour
Travel time to job site and return $87.00/hour
Travel expenses (air fare, hotel, car and meals) Chargeable to customer at cost
Minimum charge 4 hours labor, plus travel time and expenses
End User Training Seminars
Normal work day $750.00/day plus expenses (air fare, car rental, hotel and meals at cost)
Sundays, National Holiday $1495.00/day plus expenses (air fare, car rental, hotel and meals at cost)

iii. Field repairs of pumps controllers and accessories

iv. Diagnosing and recommending solutions to systems problems.
(1)
All rates listed in this section are actual hourly and daily rates, not reference rates
 71

TERMS & CONDITIONS

1 . AGREEMENT. The contract of sale resulting from Seller’s documentation together with these terms and conditions (“Contract”) constitutes the entire agreement between the
parties hereto, except as modified in writing signed by both the Seller and Purchaser. The Seller is Pulsafeeder, Inc. and the Purchaser is identified in the Contract. Any terms in a
purchase order, irrespective of their materiality, which are either different from or additional to Seller’s conditions of sale, are objected to and are excluded unless the Seller expressly
agrees in writing to such terms. Execution of such forms by Seller to accommodate Purchaser’s procurement or accounting procedures or to evidence agreed up on change orders
shall not be construed as assent to Purchaser’s terms. Acceptance of the goods shipped shall constitute assent to Seller’s conditions of sale. This Contract shall be binding up on
Purchaser and Seller, and on their successors and assigns.
2 . PROPOSAL OR QUOTATION. A proposal shall not become binding up on Seller until it has been executed and returned by Purchaser. An oral quotation shall not be considered
an offer: only a written confirmation thereof incorporating Seller’s terms and conditions shall constitute an offer.
3 . CREDIT. Credit terms of payment must have the approval of Seller’s Credit Department and must be specified in writing on Seller’s invoice or in the Contract. If Purchaser’s credit
is found by Seller to be unsatisfactory . Seller may rescind or terminate this Contract. If at any time during the term of this Contract Purchaser’s financial responsibility becomes
impaired or unsatisfactory to Seller, Seller reserves the right to stop shipment on notification to Purchaser, project owner and surety with a demand for payment in advance or at time
of delivery for future deliveries or to require other security satisfactory to Seller and in the absence thereof, to cancel the unfilled portion of the Contract. Seller will notify Purchaser
promptly of its decision to stop shipments and give an advance notice to the extent this is possible. In the absence of credit terms, sales are for cash.
4 . PAYMENT. Specific terms of payment for this order shall be set forth on the reverse side of this Contract or identified and appended hereto. Purchaser agrees to make payment at
Seller’s location specified in this Contract in lawful money of the United States. Purchaser further agrees to make all payments when due to Seller in accordance with the agreed
terms of payment in this Contract without reference to Purchaser’s agreement with or payments by the owner and with no right of retention.
5 . INTEREST AND COSTS. Purchaser agrees to pay interest at 1.5% per month (to the extent permitted by law) on all delinquent balances if and when assessed by Seller, and any
attorney’s fees or court costs arising out of and made necessary in collection of its obligation to Seller created by this Contract.
6 . TAXES. Any federal, state or local tax assessment, fee, duty or charge hereafter imposed on or measured by the products purchased hereunder shall be for Purchaser’s account
unless Purchaser furnishes Seller an acceptable exemption certificate from such tax, fee, duty or charge prior to shipment.
7 . FORCE MAJEURE. Seller shall make delivery in accordance with the terms of this Contract or within a reasonable time in the absence of any commitment, but Seller shall not be
liable for delays or defaults in delivery caused by floods, fires, storms, or other acts of God, by war or act of public enemy (or civil disturbance), strikes, lock outs, shortages of labor or
raw materials and supplies (including fuel) or production facilities, transportation service or equipment shortages or failures, action of any governmental authority or other conditions
beyond Seller’s reasonable control.
8 . CANCELLATION. If Purchaser desires to cancel or change any portion of this Contract, he must make such request in writing to Seller. Seller may, in its sole discretion, accept or
reject any such request. If accepted, the Purchaser nonetheless must take delivery and make payment to Seller for all material manufactured and in process of manufacture at time
of notice, and all special materials ordered at time of notice and for which Seller must take delivery , unless otherwise agreed by Seller in writing. All such materials must be removed
from Seller’s premises within 30 days after payment and payment will due at time of notice. Seller also reserves the right to make a cancellation charge in the event of cancellation by
the Purchaser of an order p laced in Seller’s shipping schedule and acknowledged by Seller.
9 . INSPECTION AND TESTING . Seller’s standard specifications and tests apply to all orders. All charges for inspections or tests not regularly furnished are for Purchaser’s account
and subject to prior negotiation. All inspections shall be conducted at Seller’s plant, and failure of Purchaser to avail himself of inspection privileges shall be deemed a waiver of such
privileges.
1 0 . PRICES. Prices are subject to change without notice. Orders based on published prices and accepted for scheduled shipment will be invoiced at Seller’s applicable price in
effect on the scheduled date of shipment, unless otherwise specifically noted on the order acknowledgment. All prices will be in accordance with applicable government regulations.
Orders specifying palletizing or special packaging will involve special charges.
1 1 . DELAYS. All orders are accepted subject to Seller’s ability to make delivery at the time and in the quantities specified, and Seller shall not be liable for damages for failure to
make partial or complete shipment or for any delay in making shipments. Purchaser shall be liable for any added expenses incurred by Seller because of Purchaser’s delay in fur-
nishing requested information to Seller, delay resulting from order changes by Purchaser, or delay in unloading shipments at delivery point.
1 2 . SHIPMENT. Seller will select method of shipment and routing when transportation charges are for account of Seller. When shipping instructions are specified by the Purchaser,
all costs will be for the account of the Purchaser. The foregoing includes, but is not limited to, carriers charges for notification prior to delivery, demurrage, delay in unloading, diver-
sion, or reconsignment.
1 3 . TITLE. Title to products transfers up on delivery to Purchaser at the F.O.B. point of delivery which will be clearly set forth in the shipment terms of this Contract. On receipt of
title, Purchaser is then responsible for proper protection of product, placement, compliance with all regulations and ordinances, and will indemnify Seller against all claims for per-
sonal injuries or property damage arising from the storage, use or handling of such products.
1 4 . IN TRANSIT CLAIMS. Claims for damage or shortage in transit must be made against the carrier by the owner of the shipment according to the F.O.B. terms of the Contract.
Purchaser has the responsibility to inspect shipments before or during unloading to identify any such damage or shortage and see that appropriate notation is made on the delivery
tickets or an inspection report furnished by the local agent of the carrier in order to support a claim.
1 5 . CLAIMS. Notice of Claims against Seller hereunder for any reason, must be made to Seller in writing promptly after discovery and within any applicable warranty period. Failure
to give such notice to Seller shall constitute a waiver by Purchaser of any right later to assert such a claim.
1 6 . RETURNS. Returned goods shall be accepted for credit only if in salable condition and only with evidence of Seller’s prior written consent. Seller will assess charges for freight
both ways and any costs necessary to restore such goods to the regular plant inventory . The amount of credit given will depend further up on the degree of salability of products
accepted in opinion of Seller.
1 7 . PATENTS. Seller agrees to defend, and to protect Purchaser against loss or damage arising out of any legal action for patent infringement in connection with the manufacture of
its products sold to Purchaser, provided Seller is notified promptly of any such action with complete information and is given an opportunity to defend.
1 8 . WARRANTY : LIMITATION OF LIAB ILITY . Seller warrants title to each individual product sold under this Contract and further warrants for a period of twenty-four (24 ) months
from ship date, but only to the extent and limit of the purchase price paid for such individual product, that such product conforms to the specifications set forth in the Contract and is
free from defects in material and workmanship under normal service and use for which it was designed. Seller’s sole obligation and Purchaser’s exclusive remedy under this warranty
shall be limited to one of the following, as selected by Seller: delivering to Purchaser a replacement for any product or part thereof determined by Seller to be defective, repairing
such product or part, or refunding the purchase price (or an equitable portion thereof) paid for such product or part by Purchaser. SELLER MAKES NO WARRANTY OF FITNESS
OR MERCHANTABILITY, AND NO OTHER WARRANTY, WHETHER EXPRESS OR ARISING BY OPERATION OF LAW, COURSE OF DEALING, USAGE OF TRADE OR OTH-
ERWISE IMPLIED SHALL EXIST IN CONNECTION WITH SELLER’S PRODUCTS OR ANY SALE OR USE THERE OF. Purchaser must notify Seller promptly and within the war-
ranty period of any claim under this warranty. Seller’s warranty extends only to the first purchaser of a product from Seller or Seller’s authorized distributor. All goods not manufac-
tured by Seller are warranted only to the extent of the warranties of the original manufacturer. Seller disclaims any liability arising from tort, including strict liability , and Seller further
disclaims any liability (whether arising under this or any other provision of this Contract or otherwise) for any costs (including costs of removal or replacement), liabilities, lost profits,
loss of good will or any other general, special, incidental or consequential damages incurred by Purchaser in connection with this Contract or any product purchased there under.
1 9 . LAW . This order shall be governed by and shall be construed by the law of the State of New York .
2 0 . GOVERNMENTAL REGULATIONS. Seller warrants that no code, law, regulation or ordinance of the United States, a state or any other governmental authority or agency or
any applicable Executive Order has been violated in the manufacture or sale of the items covered by this Agreement and warrants that the equipment, supplies, and/or articles cov-
ered thereby conform with all such requirements.
2 1 . NUCLEAR FINANCIAL PROTECTION. Purchaser agrees to procure and maintain, as available to it, nuclear energy liability insurance, in a form of policy approved by the
Nuclear Regulatory Commission, and protection, as available, against liability for nuclear incidents not covered by such insurance through an indemnity agreement, as provided in
Section 170 of the Atomic Energy Act of 1954, as amended, or any succeeding comparable statutory provision, and the regulations thereunder. Such financial protection shall be
effective prior to the time any equipment purchased from us is used or installed at or in connection with any nuclear facility and shall cover us an insured party . To the extent that
such financial protection is not suitable to Purchaser. Purchaser agrees to use its best efforts to cause such financial protection to be obtained by eligible parties. We will cooperate
with Purchaser and representatives of the nuclear energy insurance syndicates in complying with all underwriting requirements and with those insurance recommendations which
may be mutually agreed up on. Notwithstanding any representations or warranties made by us elsewhere in these conditions of sale, we shall not be responsible for any bodily injury
or property damage liability or any other public liability for any nuclear incidents, whether or not in respect of or arising in connection with use or installation of our equipment at any
nuclear facility or in connection with any such facility . Purchaser hereby assumes any liability which might otherwise be imposed up on us and agrees to indemnify us and hold
harmless from any such liability and costs or expenses in connection therewith.
PLP001 A11