1106D-E70TA Industrial Diesel Engine: Specifications

1106D-E70TA Industrial Diesel Engine
116.5-205 kW (156.2-274.9 hp)

EU Stage IIIA/U.S. EPA Tier 3 equivalent
The 6 cylinder option in the Perkins 1100 Series, the 1106 range delivers the
power you need for earth moving and construction all the way through to
agricultural use and warehousing. Choice of mechanically or electronically
controlled engines depending on the power output required and application.
With models meeting EU Stage II/Stage III and U.S. EPA Tier 2/Tier 3
equivalent emissions standards, the engines form a common platform with our
1200 Series Stage IV/Tier 4 Final engines. This allows for an easy transition
when you need to upgrade to the next emissions level.
Electronic turbocharged aspirated, designed to meet EU Stage IIIA/U.S. EPA
Tier 3 equivalent emissions standards.
Specifications
Power Rating
Minimum Power 116.5 kW 156.2 HP
Maximum Power 205 kW 274.9 HP
Maximum Torque 1050 Nm @ 1400 rpm 774.4 lb-ft @ 1400 rpm
Rated Speed 2200-2500 rpm
Emission Standards
Emissions EU Stage IIIA/U.S. EPA Tier 3 equivalent
General
Bore 105 mm 4.13 in
Stroke 135 mm 5.3 in
Displacement 7.01 l 427.7 in³
Aspiration Turbocharged aftercooled
Rotation from Flywheel End Anti-clockwise
Combustion System Direct injection
Compression Ratio 16.8:1
Cooling System Liquid
Cycle 4 stroke
Number of Cylinders 6 inline
www.perkins.com
Photographs are for illustrative purposes only and may not reflect final specification.
All information is substantially correct at time of printing and may be altered subsequently.
Final weights and dimensions will depend on completed specification.
SS-10463177-1000002180-015 SS Page 1 of 6
MSS-IND-1000002180-012.pdf Produced In England © 2018 Perkins Engines Company Limited Page: M-1 of M-4
116.5-205 kW (156.2-274.9 hp)
Total Coolant Capacity 15.2 l 4 gal (US)

Total Lubricating Capacity 16 l 4.2 gal (US)
Engine Dimensions*
Dry Weight 506 kg 1115 lb
Height 817 mm 32.2 in
Length 1050 mm 36.5 in
Width 668 mm 26.2 in
Features and Benefits

Choice of electronic engine
A robust electronically controlled common rail engine provides the opportunity to increase power and low speed
torque, whilst maintaining displacement volume, and still achieving the emissions standards. It uses advanced
common rail, fuel pump and injectors, combined with the latest high capacity fuel filtration to provide an engine
which is reliable when used with varying standards of fuel around the world. With an electronic control and high
pressure common rail system the engine can be integrated fully into the machine, delivering smoother operation
for the user, faster response and providing operator feedback on engine performance.
Designed for lesser regulated territories
The 1106 engines have been specifically designed for use in territories with Stage II/IIIA and Tier 2/3 equivalent
emissions standards, using the best technologies to ensure a reliable and easy to maintain machine. It uses a
turbocharged aftercooled engine to offer the best combination of power delivery and response, whilst still
meeting the emissions standards.
Ease of maintenance
The engines have mechanical or electronic fuel injection with standard 500 hour service intervals. And single
side service components, for ease of end user servicing.
Easy to upgrade
Common front and rear ends, connection points and components across the range mean that you can easily
install a different 1100 Series engine in your application.
Expertise whenever you need it
With our network of distributors, you will find all the advice you need to ensure you get the right engine. By
building strong relationships with you, we make sure you have access to the full power of the Perkins brand and
expertise. Our fully trained experts deliver total service support 24/7, 365 days of the year. Whether you need
technical information, parts identification or ordering, our distribution network is there to make sure your Perkins
engine keeps on running at peak performance.
Oil and fuel filtration
www.perkins.com
SS-10463177-1000002180-015 SS Page 2 of 6
116.5-205 kW (156.2-274.9 hp)
The high quality oil and fuel filtration on our 1100 Series range produces an engine that is reliable and durable.
Ecoplus fuel filtration is available to boost its clean running qualities and the engine is capable of running on a
wide range of global fuels including biodiesel.
Technical Information
Air inlet system
• Air compressor
• Exhaust manifold
• Induction manifold
Control system
• Alternator
• Control panel
• Starter motor
Cooling system
• Cooling pack
• Fan drive
Flywheels and flywheel housing
• Adaptor plate
• Flywheel and starter ring
• SAE B PTO Drive
Fuel system
• Fuel filter
General
• Cold start aid
• Engine mountings
Oil system
• Lubricating oil filter and breather
• Oil filter
• Sound isolated lubricating oil sump
Power take-off
• Belt driven auxiliaries
• Front end drive
www.perkins.com
SS-10463177-1000002180-015 SS Page 3 of 6
116.5-205 kW (156.2-274.9 hp)
• Timing case and gear driven auxiliaries
www.perkins.com
SS-10463177-1000002180-015 SS Page 4 of 6
1100 Series 1106D-E70TA INDUSTRIAL ENGINE
93.0-205 kW / 125-275 hp
Rated Speed
Power kW Power hp Torque Nm Torque lb-ft Speed (rpm) Rating Type
(rpm)
93.0 125 1800 598 441 1400 Industrial C intermittent rating
105 141 1800 725 535 1350 Industrial C intermittent rating
www.perkins.com
SS-10463177-1000002180-015 SS Page 5 of 6
TSS-4190-00-PERIF2F-PERIND-10463177.pdf Produced In England © 2018 Perkins Engines Company Limited Page: 1 of 2

1100 Series 1106D-E70TA INDUSTRIAL ENGINE
93.0-205 kW / 125-275 hp

Rating Standard ISO 14396:2002

Additional ratings are available for specific customer requirements. Consult your Perkins distributor.
Unless otherwise specified, all stated data is for maximum rated speed and 100% load.
B rating performance data will be added upon availability
Rating Definitions and Conditions

IND-C (Intermittent) Rating
Is the horsepower and speed capability of the engine where maximum power and/or speed are cyclic (time at full load not to
exceed 50%).
Rating Conditions for Diesel Engines – up to 7.1 liters are based on ISO/TR14396, inlet air standard conditions with a total
barometric pressure of 100 kPa (29.5 in. Hg), with a vapor pressure of 1 kPa (0.295 in Hg) and 25°C (77°F). Performance is
measured using fuel to specification EPA 2D 89.330-96 with a density of 0.845-0.850 kg/L @ 15°C (59°F) and fuel inlet
temperature 40°C (104°F).
www.perkins.com
SS-10463177-1000002180-015 SS Page 6 of 6
TSS-4190-00-PERIF2F-PERIND-10463177.pdf Produced In England © 2018 Perkins Engines Company Limited Page: 2 of 2

1106D-E70TA Industrial Diesel Engine: Specifications

Uploaded by

Copyright:

Available Formats

1106D-E70TA Industrial Diesel Engine: Specifications

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

1106D-E70TA Industrial Diesel Engine: Specifications

Uploaded by

Copyright:

Available Formats

1106D-E70TA Industrial Diesel Engine

116.5-205 kW (156.2-274.9 hp)

Total Coolant Capacity 15.2 l 4 gal (US)

Features and Benefits

• Timing case and gear driven auxiliaries

TSS-4190-00-PERIF2F-PERIND-10463177.pdf Produced In England © 2018 Perkins Engines Company Limited Page: 1 of 2

130 174 2500 695 513 1400 Industrial C intermittent rating

Rating Standard ISO 14396:2002

Rating Definitions and Conditions

TSS-4190-00-PERIF2F-PERIND-10463177.pdf Produced In England © 2018 Perkins Engines Company Limited Page: 2 of 2

You might also like