Fire Sprinkler Hanging

& Bracing Products

Innovative Hanging & Bracing Fire Protection Solutions
Innovative Products from a Trusted Leader

To help ensure the availability and operation

of safety systems after an earthquake event,
many building and industry codes now include
requirements for the design and installation
of seismic sway bracing for non-structural
components, such as fire sprinkler, mechanical,
electrical and plumbing systems. The innovative
line of nVent CADDY Bracing Systems was
developed to help keep fire sprinkler systems
intact after a seismic event and to minimize water
damage resulting from leaks or ruptures.
Bracing Systems provide contractors with high-
quality, engineered solutions, which include rigid
bracing, cable bracing and rod stiffeners.

FEATURES:
• Quick and easy installation • Meets NFPA® 13
• Lower total installed cost • cULus® Listed
• OSHPD® Pre-Approved • FM® Approved

2 | nVent.com/CADDY
nVent CADDY Bracing System Software
Now it’s easier than ever to select the correct bracing products
for use in fire protection applications. The Bracing Systems
Calculator is a new web-based calculator which allows users to
create and save designs for multiple projects while providing the
necessary submittal forms. This time-saving calculator simplifies
the selection of products and provides the necessary engineering
calculations – providing a complete solution to support rigid
bracing, cable bracing and branch line restraints.

FEATURES

• No installation needed – access via a current web browser

• Offers dynamic design preview and uses visual design tools
• Generates a complete submittal for NFPA or FM designs
• Create, manage, and re-use designs
• Supports NFPA® 13 including 2013 ed., IBC® and other
building codes
• Ability to generate a material list (bill of material) with
nVent CADDY products as well as other required materials
(pipe, anchors, etc.)

nVent.com/CADDY | 3
Rigid Bracing System

The nVent CADDY line of innovative rigid bracing products

was designed to provide superior performance and meet the
highest seismic load requirements. The products have been
designed with the end user in mind and provide contractors
with labor-saving features to promote quick and easy
installation. The system of products supports lateral and
longitudinal bracing and offers a wide range of structural
and pipe attachments.

FEATURES:
• Patent-pending lateral braces eliminate need for multiple
trips up and down ladders
• Adjustable design can be used with different brace pipe
sizes, providing flexibility on the jobsite and reducing
contractor inventory
• Snap-off bolt heads help make installation and inspection
quick and easy
• Single wrench size installs all products
• For use with brace pipe lengths up to 19’ - 8” (6m)
• cULus® Listed
• FM® Approved
• OSHPD® Pre-Approved (OPA-2629-10) to
the 2010 California Building Code and (OPM-0062-13)
to the 2013 California Building Code

4 | nVent.com/CADDY
Bar Joist Attachment Adjustable I-Beam I-Beam Attachment
(Also for I-Beams) Attachment CSBBC###**
CSBBARJ** CSBIB######**

Multi Attachment Universal Structural Easy Universal

CSBMA######** Attachment (“UNIV”) Sway Brace (“EZU”)
CSBUNIV###** CSBEZU####**

Standard Universal Quick Grip Jr. Quick Grip Lateral

Sway Brace (“STU”) Lateral Sway Brace Sway Brace (“QG”)
CSBSTU####** CSBQIKCL####** CSBQG####**

#### = Sprinkler pipe size

** = Finish - ie EG
CSBBSTU0250EG = 2 1/2” pipe size,
Electrogalvanized

nVent.com/CADDY | 5
 Now There's a Faster,
Easier Way to
Restrain Branch Lines in
a Fire Sprinkler System

THE NEW NVENT CADDY

BRANCH LINE RESTRAINT
SYSTEM
• Complete restraint system includes
structure and pipe attachments
• Works with 3/8” and 1/2” rod
• Quick and easy installation
• Meets NFPA® 13
• cULus Listed and FM® Approved
• OSHPD pre-approved

WIDE RANGE OF STRUCTURAL ATTACHMENTS: PIPE ATTACHMENT:

Steel Threaded Insert Wood/Concrete

ANOTHER INNOVATIVE HANGING & BRACING FIRE PROTECTION SOLUTION FROM NVENT CADDY.

FM is a registered certification mark of FM Approvals LLC, LTD.

NFPA is a registered trademark of the National Fire Protection Association.

SAVE TIME ON YOUR NEXT INSTALLATION

WITH THE BRANCH LINE RESTRAINT SYSTEM.
VISIT NVENT.COM/CADDY FOR FULL DETAILS.

6 | nVent.com/CADDY
Branch Line Restraint System
Traditional methods for installing branch line
restraints in fire sprinkler systems are cumbersome
and time-consuming. Contractors often cut (and
re-cut) threaded rod to precise measurements to
restrain the sprinkler pipe with a loop hanger and
surge restraint. Traditional methods also commonly
require five or more parts per restraint.
To avoid these labor-intensive methods, nVent
CADDY has streamlined the process and developed
the Branch Line Restraint System, part of the line of
hanging and bracing solutions for the fire protection
market. Ideal for restraining 1” (25 mm) through
2” (50 mm) branch lines, this innovative system is
significantly faster and easier to install than current
methods. It attaches directly to steel bar joists,
I-beams or purlins, as well as concrete and wood
structures. The hardware is installed with only
one tool, a 5/16” (8 mm) socket drill driver, which
provides significant labor savings and convenience.
It features a simple, two-step installation process,
allowing a time savings of up to 80% compared to
other methods.
Unlike most solutions that only accept 3/8” (M10)
threaded rod, the versatile Branch Line Restraint
System features a swivel attachment that can be
rotated to accept 3/8” or 1/2” (M10 or M12) threaded
rod. This allows greater restraint distances from the
pipe to structure with 1/2” (M12) threaded rod.
The system meets the requirements of NFPA® 13,
making it ideal for new construction applications.
The total system is cULus® Listed and FM®
Approved, and has been pre-approved by the state
of California (OSHPD OPA-2629-10 & OPM-0062-13).

Branch Line Restraint Branch Line Restraint Structure Branch Line Restraint Structure Branch Line Restraint Structure
Pipe Attachment Attachment to Steel Attachment to Wood/Concrete Attachment to Threaded Hole
CSBBRP####** CSBBRS1EG (No seismic approval in concrete) (Concrete anchor, beam clamp,
CSBBRS2EG through bolt steel)
CSBBRS3EG
#### = Sprinkler pipe size
** = Finish - ie EG
CSBBRP0150EG = 1 1/2” pipe size, Electrogalvanized

nVent.com/CADDY | 7
Cable Bracing System

nVent CADDY cable bracing is an ideal alternative to

rigid bracing for fire sprinkler systems when brace
lengths greater than 19’- 8” (6m) are required or when
confined/crowded spaces make rigid systems difficult
to install. The system includes pre-stretched steel
cable, attachment fittings, crimping sleeves and related
tools. The system can also be used to brace electrical,
mechanical and plumbing systems.

FEATURES:
• Color-coated cable conforms to NFPA® 13 requirements
and makes it highly visible and easier to identify cable
sizes
• UL® Listed
• OSHPD® Pre-Approved (OPA-0619)
• Made in the USA

8 | nVent.com/CADDY
 Cable Spool Crimping Sleeve Stake Eye Kit Loop Attachment Clip
CSB##CBL CSB##SLVB CSB##BD##L10 CSB##B###L##

No Pry Clip Universal Restraint Clip Universal Restraint Clip, Cable Cutter
CSBNPC## CSBURC#### Retrofit CSBC9
CSBURCR##

Manual Swaging Tool Multi-Size Manual Power Swaging Tool Die Set for Power
CSB12SBHS, CSB48 Swaging Tool CSBHS02 Swaging Tool
CSB3346SB CSBDI##

#### = Multiple sizes Available

CSB12CBL = #12 brace size

nVent.com/CADDY | 9
Bracing Accessories

Strut Seismic Hinge Pipe Rod Stiffener Strut Rod Stiffener

CSBSH#####** CSBRS1 CSBRS37EG

#### = hole size

** = Finish - ie EG
CSBSH00500EG = 9/16 hole size,
Electrogalvanized

Shear Bolt Shear Nut

CSBBARJSB50EG, CSBQIKCLSN37EG,
CSBIBSB50EG, CSBIBSN37EG
CSBUNIVSB62EG

10 | nVent.com/CADDY
Pipe Hangers

115 Standard Duty Surge Restraint

Loop Hanger SR6
115####**

115N Standard Duty Loop Hanger, FCS Height Adjustable Yook Hanger 105 Stainless Steel
No Insert Nut Loop Hanger 135####** Loop Hanger
(for metric applications) (for metric applications) 105####S*
115N####EG* FCS####††

401 Galvanized 410 Light Duty 512 EZ RISER 510 EZ RISER

Clevis Hanger Clevis Hanger for Close Quarters 510####**
401####HD 410####** 512####**

#### = pipe size

** = Finish - ie EG
1150400EG = 4” pipe size,
Electrogalvanized

HD NI Heavy Duty Pipe Clamp, 455 Malleable 456 Malleable Split Ring
Fire/Sprinkler Split Ring Hanger Hanger for Copper Tube
(for metric applications) 455####** 456####CP
HDN####

nVent.com/CADDY | 11
CPVC Hanging System

The nVent CADDY SOSR is

designed for CPVC and is
UL approved for side of joist
installations and bottom of joist
installations. It has a live hinge
that opens to simplify installation.
Some flimsy CPVC products are
not approved for side of joist
installations and do not meet
NFPA® 13 surge requirements.

107 Wraparound Strap 108 2-Hole Strap 109 Side Mount Strap SOSR Stand Off 2-Hole Strap
for CPVC Pipe for CPVC Pipe for CPVC Pipe for CPVC Pipe
107####** 108####** 109####** SOSR###

Macrofix Plus NI 3TW Fastener for Easy Snap Grommet for Snap-On Nail Plate
with Easy Closure SOSR Series wood Factory Punched Holes 304B2
429####** screw backing nut ESGFP
3TW

#### = pipe size ** = Finish - ie EG

SOSR100 = 1” pipe size, Electrogalvanized

12 | nVent.com/CADDY
 The Rod Lock family of products allows
nVent CADDY Rod Lock contractors to prefabricate complex assemblies
at ground level or offsite, and then easily lift and
lock them into place by pushing the threaded rod
supports into the Rod Lock device. This ingenious
technology works with threaded rod with burrs or
imperfections, helping to eliminate clean-up time
or the need to replace damaged threaded rod.
The most unique feature of the system is its
breakthrough “push-to-install” design, which
dramatically reduces the installation time of
threaded rod support structures when compared
to conventional fasteners. Simply speaking – Rod
Lock is revolutionizing how contractors support
conduit, cable tray, lights, ductwork and pipe by
helping to make installations faster, easier and
more secure.

#### = threaded rod size

** = Finish - ie EG
CRLB37EG = 3/8 rod size,
Rod Lock Rod Lock
Electrogalvanized
Beam Clamp Beam Clamp, Thick Flange
CRLB##** CRLB##**

Rod Lock Rod Lock Plywood Rod Lock Nut SN Series Nut
Anchor Screw Form Preset Anchor CRLN##** SN##
CRLA##** CRLWM##**

Rod Lock Rod Lock Rod Lock Rod Lock

Channel Nut L-Bracket Strut, Perforated Telescoping Strut Replacement
CRLS##** CRLL##** CRLP###L## TSR200##RL

nVent.com/CADDY | 13
Structural Attachments

SBC Stamped Beam Clamp, 300 Universal Beam Clamp

Top Mount 300####**
SBC037 / SBCM10

310 Universal Beam Clamp, 305 Stainless Steel 300C Standard 34SL Retrofit
Wide Mouth Top-Mount Beam Clamp Retainer Strap Retainer Strap
310####** 305####S* 300C####** 034SL####**

PH Multi-Purpose PHSW Multi-Purpose 315 Malleable Iron 325 Steel

Purlin Clamp Purlin Clamp with Swivel Purlin Clamp Side Beam Attachment
PH6FP PHSW6FP 315####** 325####**

327 Malleable Iron 326 Universal Steel 329 Side Beam Attachment 328 Threaded Steel
Side Beam Attachment Side Beam Attachment 329####** Side Beam Attachment
327####** 326####** 328####**

#### = Multiple sizes available ** = Finish - ie EG

3000037EG = 3/8 rod size, Electrogalvanized
300C3712EG = 3/8 rod size, 12” length

14 | nVent.com/CADDY
 37 Steel Eye Socket 38 Offset Steel 365 Steel Wall or 365M Malleable Iron Wall
Rod Hanger Eye Socket Rod Hanger Ceiling Plate or Ceiling Plate
037####** 038####** 365####** 365M####**

PBF Two Hole Base Plate PBF Two Hole Base Plate PBF Four Hole Base Plate 352 Standard Duty
for Threaded Rod for Threaded Pipe for Threaded Pipe Welded Wall Bracket
(for metric applications) (for metric applications) (for metric applications)
352####**
PBR##L## PBT##L## PBH##L##

353 Heavy Duty Triangular Wall Bracket, Triangular Wall Bracket, TBHK Trapezoidal
Welded Wall Bracket Four/Three Hole Four/Two Hole Deck Hanger
353####** (for metric applications) (for metric applications) (for metric applications)
SCT02 SCT03 TBHK

370A Single Concrete 355 Concrete Insert Plate 355N Nut for 355 Series
Insert Plate and Rod 355####** 355N####**
370A####**

nVent.com/CADDY | 15
Pipe Supports

721 Pipe Support 722 Adjustable 723 Adjustable 724 Adjustable Pipe Support
with U-Bolt Pipe Support Pipe Support Assembly Assembly with U-Bolt
721####PL 722####PL 723####PL 724####PL

#### = pipe size Visit nVent.com/CADDY for new product information, up-to-date product
7210600PL= 6” pipe size specifications and applications, a list of upcoming events and industry tradeshow
participation and more.
A full literature library provides pertinent literature in an easy-to-download
PDF format. This is a great way to stay informed on all the current publications.
New product brochures and datasheets are posted
as soon as they are printed.
In the News & Events section, customers can
find new product updates, press releases
and lists of seminars.
Locations and contact information
is listed for nVent offices around
the world as well as where to buy
nVent products.
nVent.com/CADDY provides a
convenient way to get the answers you
need day or night. Visit nVent online.

16 | nVent.com/CADDY
Hardware

Threaded Rod EM-HEX Rod Coupler 25R Hex Rod Reducer

050####** 025####EG 025R####EG

150M Standard U-Bolt U-Bolt U-Bolt, DIN 3570

150M####** (for metric applications) (for metric applications)
UB4N##### UB2N#####

42 Hex Head Lag Screw 43 Wood Drive Screw 80 Tie Bolt

042####EG 043####EG 080######PL

#### = Multiple sizes available,

** = Finish - ie EG
0503710EG = 3/8 rod size, 10’ length, Electrogalvanized
150M0400PL = 4” pipe size

nVent.com/CADDY | 17
Anchors

Drop-In Anchor Flanged Drop-in Anchor Spike Anchor Wedge Expansion

CA####EG LA####EG RAWL#### Anchor Bolt
CSBCAB######EG

Concrete Anchor Screw Screw Drill Bits HangerMate® Vertical HangerMate® Vertical Mount
CSBCAS######EG CSBCASDB###### Mount Screw for Steel Screw for Steel with Lock Nut
HMZG### HMZG471

18 | nVent.com/CADDY
 HangerMate® Horizontal HangerMate® Horizontal Mount HangerMate® Vertical Mount HangerMate® Horizontal
Mount Screw for Steel Screw for Steel with Lock Nut Screw for Wood Mount Screw for Wood
HMZH### HMZH476 HMZG### HMZH665

HangerMate® Vertical Mount HangerMate® SDS Drill Bit HangerMate® Drill Bit HangerMate® Tanged Drill Bit
Screw for Concrete for Hammer Drills Adaptor for Hammer Drills
HMZG### HMZE### HMZE240 HMZE340

HangerMate® Hex HangerMate® Drive Sleeve MTVB Gravity Toggle

Drive Socket HMZE220 with Rubber Washer
HMZE215 MTVB####

#### = Multiple sizes available

CA0025EG = 1/4” rod size
CSBCAB060062EG = 6” length, 5/8” screw dia.

nVent.com/CADDY | 19
Our powerful portfolio of brands:

CADDY ERICO HOFFMAN RAYCHEM SCHROFF TRACER

nVent.com/CADDY
WARNING: nVent products shall be installed and used only as indicated in nVent’s product instruction sheets and training materials. Instruction sheets are available
at nVent.com/ERICO and from your nVent customer service representative. Improper installation, misuse, misapplication or other failure to completely follow nVent’s
instructions and warnings may cause product malfunction, property damage, serious bodily injury and/or death, and void your warranty.
©2018 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of their respective
owners. nVent reserves the right to change specifications without notice.
CADDY-SB-B1230B-B231LT16WW-EN-1805