G GUYED TOWERS - 45GSR

S TA N D A R D 4 5 G S R G U Y E D T O W E R

ROHN 45GSR
The first. The original. 45GSR
GENERAL USE

The 45GSR maintains the utility of the 45G and

adds the strength of solid round steel legs. The
45GSR has a strong 4 bolt flange connection,
giving connection joints superior strength over
typical 1 bolt flange connection systems. The
45GSR is available in heights up to 340’.

FEATURES

• Completely hot-dip galvanized after fabrication

• Built on a 16 3/4” equilateral triangle design
• Heavy solid steel round legs joined by Zig-Zag®
cross members
• Each section contains all required nuts and bolts
shipped with section
• Continuous solid round steel bracing

CAUTION
Mixing copies of ROHN towers with ROHN towers is dangerous and voids all
engineering and warranty data supplied by ROHN. Materials used by others are
not the same quality and have not been tested or engineered by ROHN. Mixing
ROHN tower sections with non-ROHN products may cause tower failure or injury.

Per Rev G requirements, any structure greater than 10’ requires a climber
safety device. Please see page 92 for ordering information.

70 Phone (309) 566-3000 • Fax (309) 566-3079 • www.rohnnet.com • The Industry Standard
© 2011 ROHN PRODUCTS LLC
 GUYED TOWERS - 45GSR G
S TA N D A R D 4 5 G S R G U Y E D T O W E R
SECTIONS

9 21/32”
14 1/2”
QUICK REFERENCE
PARTS & ACCESSORIES PAGE 92
GROUNDING INFORMATION PAGE 93
FOUNDATION INFORMATION PAGES 93-97
16 3/4”

Optional Waveguide
Brackets (KY2041A)

1 1/4” O.D.
Solid Round
7/16” O.D.
Solid Bracing 1 1/4” O.D.
Solid Round

7/16” O.D.
Solid Bracing

Optional double braced sections

are available upon request.

4.3’ 45GSR SHORT BASE

45GSRSB
TO BE EMBEDDED IN CONCRETE.

STANDARD SECTION
45GSR10 - 10’ Section
45GSR20 - 20’ Section

Phone (309) 566-3000 • Fax (309) 566-3079 • www.rohnnet.com • The Industry Standard 71
© 2011 ROHN PRODUCTS LLC
G GUYED TOWERS - 45GSR

BUYERS GUIDE
S TA N D A R D D E S I G N S - 4 5 G S R
9 0 M P H R E V. G [ 3 S E C O N D G U S T ]
Design Criteria

EPA (SQ. FT.) For Exposure B, Revision G

101.8 73.8
35’
EPA (SQ. FT.) For Exposure C, Revision G
47’
1/4” EHS
(665#)
Guy Initial Tension

P/N 45GSR90R040
Tower Model Tower Height (ft.)
32’ Windspeed (Rev. G) ROHN Tower
P/N 45GSR90R040
EPA= Effective Projected Area

This document is to serve as a guide for sizing and purchasing the 45GSR tower. Tower and foundation installations should
be performed by qualified and experienced personnel using assembly drawings provided with each tower.

DESIGN NOTES:

1. Tower designs are in accordance with ANSI/TIA-222-G, Class I Structures, Topographic Category 1.
2. Design assumes towers are installed on level ground. Lower EPA values will apply for roof mounted towers or for sites
located on unusual terrain.
3. Designs assume two 7/8” diameter lines on each tower face.
4. Anchor radius is from tower base to intersection of anchor rod with ground.
5. Guy chord lengths shown are based on level ground. Initial tensions for guys are shown in ( ) in pounds at 60º Fahrenheit.
6. Antenna and mounts are assumed symmetrically placed at the tower top.

PARTS LIST NOTES:

1. Items listed are required for complete guyed towers.

2. Base and anchor foundations listed refer to standard foundation designations.
3. Guys provided with each standard tower are based on level ground conditions with an additional 6% length.
4. Rev G anchor grounding (AGK1GGX) and base grounding (BGK3GGX) are included with the tower material.
5. Assembly drawings and a safety package (P/N: ACWS) are included with each tower.
6. Parts lists are subject to change based on availability or revised design criteria.

FOR FOUNDATION INFORMATION, PLEASE SEE PAGES 93-97.

FOR GENERAL INSTALLATION INFORMATION, PLEASE SEE PAGES 147-153.

72 Phone (309) 566-3000 • Fax (309) 566-3079• www.rohnnet.com • The Industry Standard
© 2011 ROHN PRODUCTS LLC
 GUYED TOWERS - 45GSR G
S TA N D A R D D E S I G N - 4 5 G S R

45GSR
9 0 M P H R E V. G
40’ TOWER
45GSR20 45GSRSB GA45GD FDNS SOLID ROD
95.0 OR 73.8 TOWER PARTS BASE ANCHOR
35’
INCLUDED 2 1 1 FB1G AB2
47’
1/4” EHS
(665#) GUYS & 1/4EHS BG2144 3/8THH 1/2TBE&J TBSAFETY 40’ ROHN 45GSR
Al l par ts shown i n tabl e
CONNECTIONS
150’ 6 6 3 3 a re i nc l uded when order i ng
INCLUDED
Par t No: 45GS R 90R 040
ANCHORS & GAC3455TOP AGK1GGX BGK3GGX CPC.5/.75
32’ GROUNDING
P/N: 45GSR90R040 INCLUDED 3 1 3 3

50’ TOWER FDNS

95.0 OR 70.0 45GSR20 45GSR10 45GSRSB GA45GD
TOWER PARTS BASE ANCHOR
45’
INCLUDED 2 1 1 1 FB1G AB2
60’
1/4” EHS
(665#) GUYS & 1/4EHS BG2144 3/8THH 1/2TBE&J TBSAFETY 50’ ROHN 45GSR
Al l par ts shown i n tabl e
CONNECTIONS
200’ 6 6 3 3 a re i nc l ud ed when ord er i ng
INCLUDED
Par t No: 45GS R 90R 050
ANCHORS & GAC3455TOP AGK1GGX BGK3GGX CPC.5/.75
40’ GROUNDING
P/N: 45GSR90R050 INCLUDED 3 1 3 3

60’ TOWER FDNS

90.4 OR 66.7 45GSR20 45GSRSB GA45GD
TOWER PARTS BASE ANCHOR
55’
INCLUDED 3 1 1 FB1G AB2
73’
1/4” EHS
(665#) GUYS & 1/4EHS BG2144 3/8THH 1/2TBE&J TBSAFETY
60’ ROHN 45GSR
Al l par ts shown i n tabl e
CONNECTIONS
3 a re i nc l uded when order i ng
INCLUDED 250’ 6 6 3
Par t No: 45GS R 90R 060
ANCHORS & GAC3455TOP AGK1GGX BGK3GGX CPC.5/.75
48’ GROUNDING
P/N: 45GSR90R060 INCLUDED 3 1 3 3

70’ TOWER
GA45GD FDNS
86.5 OR 64.9 45GSR20 45GSR10 45GSRSB BASE ANCHOR
65’ TOWER PARTS
INCLUDED 3 1 1 2 FB1G AB2
86’
1/4” EHS
GUYS & BG2144
70’ ROHN 45GSR
(665#) 1/4EHS 3/8THH 1/2TBE&J TBSAFETY Al l par ts shown i n tabl e
35’
66’
CONNECTIONS a re i nc l ud ed when ord er i ng
INCLUDED 500’ 12 12 6 3
Par t No: 45GS R 90R 070
ANCHORS & GAC3455TOP AGK1GGX BGK3GGX CPC.5/.75
56’ GROUNDING
P/N: 45GSR90R070 INCLUDED 3 1 3 3

80’ TOWER FDNS

82.6 OR 62.9 45GSR20 45GSRSB GA45GD
TOWER PARTS BASE ANCHOR
75’
INCLUDED 4 1 2 FB1G AB2
99’
1/4” EHS
(665#) GUYS & 1/4EHS BG2144 3/8THH 1/2TBE&J TBSAFETY 80’ ROHN 45GSR
CONNECTIONS Al l par ts shown i n tabl e
35’
73’
550’ 12 12 6 3 a re i nc l uded when order i ng
INCLUDED
Par t No: 45GS R 90R 080
ANCHORS & GAC3455TOP AGK1GGX BGK3GGX CPC.5/.75
64’ GROUNDING
P/N: 45GSR90R080 INCLUDED 3 1 3 3

Phone (309) 566-3000 • Fax (309) 566-3079 • www.rohnnet.com • The Industry Standard
73
© 2011 ROHN PRODUCTS LLC
G GUYED TOWERS - 45GSR

S TA N D A R D D E S I G N - 4 5 G S R

45GSR
9 0 M P H R E V. G
90’ TOWER FDNS
80.3 OR 60.4
TOWER PARTS
45GSR20 45GSR10 45GSRSB GA45GD
BASE ANCHOR
SOLID ROD
85’
INCLUDED 4 1 1 2 FB1G AB2
111’
1/4” EHS
(665#) GUYS & 1/4EHS BG2144 3/8THH 1/2TBE&J TBSAFETY
90’ ROHN 45GSR
Al l par ts shown i n tabl e
45’ CONNECTIONS
85’
3 a re i nc l ud ed when ord er i ng
INCLUDED 625’ 12 12 6
Par t No: 45GS R 90R 090
ANCHORS & GAC3455TOP AGK1GGX BGK3GGX CPC.5/.75
72’ GROUNDING
P/N: 45GSR90R090 INCLUDED 3 1 3 3

100’ TOWER
GA45GD FDNS
45GSR20 45GSRSB
95’
78.0 OR 58.4
TOWER PARTS BASE ANCHOR
INCLUDED 5 1 2 FB1G AB2
124’
1/4” EHS
GUYS &
100’ ROHN 45GSR
(665#) 1/4EHS BG2144 3/8THH 1/2TBE&J TBSAFETY Al l par ts shown i n tabl e
55’
97’
CONNECTIONS a re i nc l uded when order i ng
INCLUDED 725’ 12 12 6 3
Par t No: 45GS R 90R 100
ANCHORS & GAC3455TOP AGK1GGX BGK3GGX CPC.5/.75
80’ GROUNDING
P/N: 45GSR90R100 INCLUDED 3 1 3 3

110’ TOWER
GA45GD FDNS
45GSR20 45GSR10 45GSRSB
105’
75.4 OR 56.6
TOWER PARTS BASE ANCHOR
INCLUDED 5 1 1 3 FB1G AB2
137’
1/4” EHS
GUYS & BG2144
110’ ROHN 45GSR
65’ (665#) 1/4EHS 3/8THH 1/2TBE&J TBSAFETY Al l par ts shown i n tabl e
109’ CONNECTIONS a re i nc l ud ed when ord er i ng
INCLUDED 1100’ 18 18 9 3
Par t No: 45GS R 90R 110
35’ 95’
ANCHORS & GAC3455TOP AGK1GGX BGK3GGX CPC.5/.75
88’ GROUNDING
P/N: 45GSR90R110 INCLUDED 3 1 3 3

120’ TOWER
GA45GD FDNS
45GSR20 45GSRSB
115’
73.5 OR 54.2 TOWER PARTS BASE ANCHOR
INCLUDED 6 1 3 FB1G AB2
150’
1/4” EHS
(665#) GUYS & 1/4EHS BG2144 3/8THH 1/2TBE&J TBSAFETY
120’ ROHN 45GSR
75’ Al l par ts shown i n tabl e
122’ CONNECTIONS
1200’ 18 18 9 3 a re i nc l uded when order i ng
INCLUDED
Pa r t No: 45GS R 90R 120
35’ 102’
ANCHORS & GAC3455TOP AGK1GGX BGK3GGX CPC.5/.75
96’ GROUNDING
P/N: 45GSR90R120 INCLUDED 3 1 3 3

130’ TOWER
GA45GD FDNS
65.0 OR 49.8
TOWER PARTS 45GSR20 45GSR10 45GSRSB BASE ANCHOR
118’
INCLUDED 6 1 1 3 FB1G AB2
157’
5/16” EHS
85’ (1,120#) 1/4EHS 142265 BG2144 BG2146 130’ ROHN 45GSR
134’
1/4” EHS GUYS & Al l par ts shown i n tabl e
(665#)
CONNECTIONS 800’ 500’ 12 6 a re i nc l uded when order i ng
45’ 113’ INCLUDED Par t No: 45GS R 90R 130
3/8THH 7/16THH 5/8TBE&J 1/2TBE&J
104’
P/N: 45GSR90R130 12 6 3 6
ANCHORS & GAC3455TOP AGK1GGX BGK3GGX CPC.5/.75 TBSAFETY
GROUNDING
INCLUDED 3 1 3 3 3

74 Phone (309) 566-3000 • Fax (309) 566-3079 • www.rohnnet.com • The Industry Standard
© 2011 ROHN PRODUCTS LLC
 GUYED TOWERS - 45GSR G
S TA N D A R D D E S I G N - 4 5 G S R
9 0 M P H R E V. G

128’
140’ TOWER
63.5 OR 48.9 TOWER PARTS
INCLUDED
45GSR20 45GSRSB GA45GD FDNS
BASE ANCHOR
45GSR
SOLID ROD
170’ 7 1 3 FB1G AB2
5/16” EHS
(1,120#) 1/4EHS 142265 BG2144 BG2146 140’ ROHN 45GSR
95’
Al l par ts shown i n
147’ 1/4” EHS GUYS& tabl e are i nc l uded
(665#)
CONNECTIONS 875’ 550’ 12 6
when order i ng
55’ 125’ INCLUDED 3/8THH 7/16THH 5/8TBE&J 1/2TBE&J Par t No: 45GS R 90R 140
112’
P/N: 45GSR90R140 12 6 3 6
ANCHORS & GAC3455TOP AGK1GGX BGK3GGX CPC.5/.75 TBSAFETY
GROUNDING
INCLUDED 3 1 3 3 3

150’ TOWER
GA45GD FDNS
45GSR20 45GSR10 45GSRSB
138’
62.2 OR 48.2 TOWER PARTS BASE ANCHOR
INCLUDED 7 1 1 4 FB1G AB2
183’
105’
5/16” EHS
159’ (1,120#) 1/4EHS 142265 BG2144 BG2146
65’ 1/4” EHS GUYS & 150’ ROHN 45GSR
136’
(665#)
CONNECTIONS 1350’ 600’ 18 6 Al l par ts shown i n tabl e
a re i nc l ud ed when ord er i ng
35’ 125’ INCLUDED 3/8THH 7/16THH 5/8TBE&J 1/2TBE&J Par t No: 45GS R 90R 150
120’
P/N: 45GSR90R150 18 6 3 9
ANCHORS & GAC3455TOP AGK1GGX BGK3GGX CPC.5/.75 TBSAFETY
GROUNDING
INCLUDED 3 1 3 3 3

160’ TOWER
GA45GD FDNS
60.4 OR 47.0 45GSR20 45GSRSB
148’ TOWER PARTS BASE ANCHOR
INCLUDED 8 1 4 FB1G AB2
196’
115’ 5/16” EHS
172’ (1,120#) 1/4EHS 142265 BG2144 BG2146 160’ ROHN 45GSR
75’
148’ 1/4” EHS GUYS & Al l par ts shown i n
(665#)
CONNECTIONS 1450’ 625’ 18 6 tabl e are i nc l uded
35’ 133’
INCLUDED when order i ng
3/8THH 7/16THH 5/8TBE&J 1/2TBE&J Par t No: 45GS R 90R 160
128’
P/N: 45GSR90R160 18 6 3 9
ANCHORS & GAC3455TOP AGK1GGX BGK3GGX CPC.5/.75 TBSAFETY
GROUNDING
INCLUDED 3 1 3 3 3

170’ TOWER
GA45GD FDNS
45GSR20 45GSR10 45GSRSB
158’
59.9 OR 46.4
TOWER PARTS BASE ANCHOR
INCLUDED 8 1 1 4 FB1G AB3
208’
125’
185’ 5/16” EHS
(1,120#) 1/4EHS 142265 BG2144 BG2146
85’
160’ GUYS & 170’ ROHN 45GSR
1/4” EHS
(665#) CONNECTIONS 1575’ 675’ 18 6 Al l par ts shown i n tabl e
45’ 143’ INCLUDED a re i nc l uded when order i ng
3/8THH 7/16THH 5/8TBE&J TBSAFETY Par t No: 45GS R 90R 170
136’
P/N: 45GSR90R170 18 6 12 3
ANCHORS & GAC5655TOP AGK1GGX BGK3GGX CPC1/1.25
GROUNDING
INCLUDED 3 1 3 3

Phone (309) 566-3000 • Fax (309) 566-3079 • www.rohnnet.com • The Industry Standard
75
© 2011 ROHN PRODUCTS LLC
G GUYED TOWERS - 45GSR

S TA N D A R D D E S I G N - 4 5 G S R

45GSR
9 0 M P H R E V. G
180’ TOWER
GA45GD FDNS
45GSR20 45GSRSB SOLID ROD
58.5 OR 45.7 TOWER PARTS BASE ANCHOR
168’
INCLUDED 9 1 4 FB1G AB3
221’
135’ 5/16” EHS
197’ (1,120#) 1/4EHS 142265 BG2144 BG2146
180’ ROHN 45GSR
95’ 1/4” EHS GUYS & Al l par ts shown i n
173’
(665#)
CONNECTIONS 1675’ 725’ 18 6
ta bl e are i nc l uded
55’ 154’ INCLUDED 3/8THH 7/16THH 5/8TBE&J TBSAFETY w h e n order i ng
144’
Pa r t No : 45GS R 90R 180
P/N: 45GSR90R180 18 6 12 3
ANCHORS & GAC5655TOP AGK1GGX BGK3GGX CPC1/1.25
GROUNDING
INCLUDED 3 1 3 3

190’ TOWER
GA45GD FDNS
45GSR20 45GSR10 45GSRSB
178’
57.0 OR 45.2 TOWER PARTS BASE ANCHOR
INCLUDED 9 1 1 5 FB1G AB3
145’ 234’

210’ 5/16” EHS

1/4EHS 142265 BG2144 BG2146
105’
(1,120#)
190’ ROHN 45GSR
185’ GUYS & Al l par ts shown i n
65’ 1/4” EHS
(665#) CONNECTIONS 2300’ 750’ 24 6
165’ ta bl e are i nc l uded
35’ 156’ INCLUDED 3/8THH 7/16THH 5/8TBE&J TBSAFETY w h e n order i ng
152’
Pa r t No : 45GS R 90R 190
P/N: 45GSR90R190 24 6 15 3
ANCHORS & GAC5655TOP AGK1GGX BGK3GGX CPC1/1.25
GROUNDING
INCLUDED 3 1 3 3

200’ TOWER
GA45GD APL4A FDNS
45GSR20 45GSRSB
188’
56.1 OR 44.6 TOWER PARTS BASE ANCHOR
INCLUDED 10 1 5 1 FB1G AB3
155’ 247’
5/16” EHS
223’ (1,120#) 1/4EHS 142265 BG2144 BG2146 200’ ROHN 45GSR
115’
197’ 1/4” EHS GUYS & Al l par ts shown i n
75’ (665#)
CONNECTIONS 2425’ 800’ 24 6 ta bl e are i nc l uded
177’
35’ 164’ INCLUDED 3/8THH 7/16THH 5/8TBE&J TBSAFETY w h e n order i ng
Pa r t No : 45GS R 90R 200
160’
P/N: 45GSR90R200 24 6 15 3
ANCHORS & GAC5655TOP AGK1GGX BGK3GGX CPC1/1.25
GROUNDING
INCLUDED 3 1 3 3

220’ TOWER
GA45GD APL4A FDNS
45GSR20 45GSRSB
208’
54.2 OR 43.5
TOWER PARTS BASE ANCHOR
INCLUDED 11 1 5 1 FB1G AB3
175’ 272’
5/16” EHS
135’
248’ (1,120#) 1/4EHS 142265 BG2144 BG2146 220’ ROHN 45GSR
222’ GUYS & Al l par ts shown i n
95’
200’
1/4” EHS
(665#) CONNECTIONS 2725’ 875’ 24 6 ta bl e are i nc l uded
55’ 184’ INCLUDED 3/8THH 7/16THH 5/8TBE&J TBSAFETY w h e n order i ng
Pa r t No: 45GS R 90R 220
176’
P/N: 45GSR90R220 24 6 15 3
ANCHORS & GAC5655TOP AGK1GGX BGK3GGX CPC1/1.25
GROUNDING
INCLUDED 3 1 3 3

76 Phone (309) 566-3000 • Fax (309) 566-3079 • www.rohnnet.com • The Industry Standard
© 2011 ROHN PRODUCTS LLC
 GUYED TOWERS - 45GSR G
S TA N D A R D D E S I G N - 4 5 G S R
9 0 M P H R E V. G

228’
240’ TOWER
52.5 OR 42.6 TOWER PARTS
INNER OUTER
45GSR20 45GSRSB GA45GD APL4A BASE ANCHOR ANCHOR
45GSR
SOLID ROD
195’
INCLUDED 12 1 6 1 FB1G AB2 AB2
298’ 5/16” EHS
274’ (1,120#)
155’
247’
1/4EHS 142265 BG2144 BG2146 240’ ROHN 45GSR
115’ 1/4” EHS
(665#) GUYS & Al l par ts shown i n
75’ 150’ CONNECTIONS 2850’ 950’ 30 6 ta b l e are i nc l uded
122’
35’
102’ INCLUDED 3/8THH 7/16THH 5/8TBE&J 1/2TBE&J w hen order i ng
Pa r t No: 45GS R 90R 240
96’ 192’
P/N: 45GSR90R240 30 6 3 15
ANCHORS & GAC3455TOP AGK1GGX BGK3GGX CPC.5/.75 TBSAFETY
GROUNDING
INCLUDED 6 2 3 6 6

260’ TOWER INNER OUTER

45GSR20 45GSRSB GA45GD APL4A BASE ANCHOR
248’
51.1 OR 41.8 TOWER PARTS ANCHOR
INCLUDED 13 1 6 1 FB1G AB2 AB2
215’ 324’ 5/16” EHS
299’ (1,120#)
175’
272’
1/4EHS 142265 BG2144 BG2146 260’ ROHN 45GSR
135’ 1/4” EHS
(665#) GUYS & Al l par ts shown i n
95’ 175’ CONNECTIONS 3250’ 1050’ 30 6 ta bl e are i nc l uded
55’
147’
125’
INCLUDED 3/8THH 7/16THH 5/8TBE&J 1/2TBE&J when order i ng
Pa r t No: 45GS R 90R 260
112’ 208’
P/N: 45GSR90R260 30 6 3 15
ANCHORS & GAC3455TOP AGK1GGX BGK3GGX CPC.5/.75 TBSAFETY
GROUNDING
INCLUDED 6 2 3 6 6

280’ TOWER
INNER OUTER
45GSR20 45GSRSB GA45GD APL4A BASE ANCHOR
268’
50.0 OR 40.9
TOWER PARTS ANCHOR
235’
INCLUDED 14 1 7 1 FB1G AB2 AB3
349’ 5/16” EHS
195’ 325’ (1,120#)
297’ 1/4EHS 142265 BG2144 BG2146 3/8THH 280’ ROHN 45GSR
155’ 1/4” EHS
272’ (665#) GUYS & Al l par ts shown i n
CONNECTIONS 4050’ 1125’ 36 6 36
115’ ta bl e are i nc l ud ed
150’
75’
122’ INCLUDED 7/16THH 5/8TBE&J 1/2TBE&J CPC.5/.75 CPC1/1.25 when ord er i ng
35’
102’
96’ 224’
Pa r t No: 45GS R 90R 280
P/N: 45GSR90R280 6 12 9 3 3
ANCHORS & GAC3455TOP GAC5655TOP AGK1GGX BGK3GGX TBSAFETY
GROUNDING
INCLUDED 3 3 2 3 6

300’ TOWER INNER OUTER

45GSR20 45GSRSB GA45GD APL4A BASE ANCHOR
288’
48.9 OR 40.1 TOWER PARTS ANCHOR
255’
INCLUDED 15 1 7 1 FB1G AB2 AB3
375’
5/16” EHS
215’ 350’ (1,120#)
322’
1/4EHS 142265 BG2144 BG2146 3/8THH 300’ ROHN 45GSR
175’ 1/4” EHS
(665#) GUYS & All par ts shown i n
297’
CONNECTIONS 4525’ 1200’ 36 6 36
135’ ta bl e are i nc l ud ed
175’
95’
147’ INCLUDED 7/16THH 5/8TBE&J 1/2TBE&J CPC.5/.75 CPC1/1.25 when ord er i ng
55’
125’ Pa r t No: 45GS R 90R 300
112’ 240’
P/N: 45GSR90R300 6 12 9 3 3
ANCHORS & GAC3455TOP GAC5655TOP AGK1GGX BGK3GGX TBSAFETY
GROUNDING
INCLUDED 3 3 2 3 6

Phone (309) 566-3000 • Fax (309) 566-3079 • www.rohnnet.com • The Industry Standard
77
© 2011 ROHN PRODUCTS LLC
G GUYED TOWERS - 45GSR

S TA N D A R D D E S I G N - 4 5 G S R

45GSR
9 0 M P H R E V. G
320’ TOWER
INNER OUTER
45GSR20 45GSRSB GA45GD APL4A BASE ANCHOR
308’
47.7 OR 39.5
TOWER PARTS ANCHOR SOLID ROD
275’
INCLUDED 16 1 8 1 FB1G AB2 AB3
400’ 5/16” EHS
235’ 376’ (1,120#)
348’ 1/4EHS 142265 BG2144 BG2146 3/8THH 320’ ROHN 45GSR
195’ 1/4” EHS
322’ (665#) GUYS & Al l par ts shown i n
155’
CONNECTIONS 5450’ 1275’ 42 6 42
115’ 201’ ta bl e are i nc l ud ed
75’ 172’
148’
INCLUDED 7/16THH 5/8TBE&J 1/2TBE&J CPC.5/.75 CPC1/1.25 w hen order i ng
35’ Pa r t No: 45GS R 90R 320
133’ 128’ 256’
P/N: 45GSR90R320 6 12 12 3 3
ANCHORS & GAC3455TOP GAC5655TOP AGK1GGX BGK3GGX TBSAFETY
GROUNDING
INCLUDED 3 3 2 3 6

340’ TOWER
INNER OUTER
45GSR20 45GSRSB GA45GD APL4A BASE ANCHOR
328’
46.8 OR 38.9
TOWER PARTS ANCHOR
INCLUDED 17 1 8 FB1G AB2 AB3
295’ 426’ 1
5/16” EHS
255’ 401’ (1,120#)
373’ 1/4EHS 142265 BG2144 BG2146 3/8THH 340’ ROHN 45GSR
215’ 1/4” EHS
(665#) GUYS & Al l par ts shown i n
175’
347’
CONNECTIONS 5975’ 1375’ 42 6 42
135’ 227’ ta bl e are i nc l ud ed
95’ 197’
173’
INCLUDED 7/16THH 5/8TBE&J 1/2TBE&J CPC.5/.75 CPC1/1.25 w hen order i ng
55’ Pa r t No: 45GS R 90R 340
154’ 144’ 272’
P/N: 45GSR90R340 6 12 12 3 3
ANCHORS & GAC3455TOP GAC5655TOP AGK1GGX BGK3GGX TBSAFETY
GROUNDING
INCLUDED 3 3 2 3 6

78 Phone (309) 566-3000 • Fax (309) 566-3079 • www.rohnnet.com • The Industry Standard
© 2011 ROHN PRODUCTS LLC
 GUYED TOWERS - 45GSR G
S TA N D A R D D E S I G N - 4 5 G S R

45GSR
1 1 0 M P H R E V. G
40’ TOWER
45GSR20 45GSRSB GA45GD FDNS SOLID ROD
35’
66.9 OR 48.2 TOWER PARTS BASE ANCHOR
INCLUDED 2 1 1 FB2G AB2
47’
1/4” EHS
(665#) GUYS & 1/4EHS BG2144 3/8THH 1/2TBE&J TBSAFETY 40’ ROHN 45GSR
Al l par ts shown i n tabl e
CONNECTIONS
150’ 6 6 3 3 a re i nc l uded when order i ng
INCLUDED
Par t No: 45GS R 110R 040
ANCHORS & GAC3455TOP AGK1GGX BGK3GGX CPC.5/.75
32’ GROUNDING
P/N: 45GSR110R040 INCLUDED 3 1 3 3

50’ TOWER
GA45GD FDNS
45GSR20 45GSR10 45GSRSB
45’
63.1 OR 46.0 TOWER PARTS BASE ANCHOR
INCLUDED 2 1 1 1 FB2G AB2
60’
1/4” EHS
(665#) GUYS & 1/4EHS BG2144 3/8THH 1/2TBE&J TBSAFETY 50’ ROHN 45GSR
Al l par ts shown i n tabl e
CONNECTIONS
200’ 6 6 3 3 a re i nc l ud ed when ord er i ng
INCLUDED
Par t No: 45GS R 110R 050
ANCHORS & GAC3455TOP AGK1GGX BGK3GGX CPC.5/.75
40’ GROUNDING
P/N: 45GSR110R050 INCLUDED 3 1 3 3

60’ TOWER
GA45GD FDNS
45GSR20 45GSRSB
55’
57.5 OR 38.3
TOWER PARTS BASE ANCHOR
INCLUDED 3 1 1 FB2G AB2
73’
1/4” EHS
(665#) GUYS & 1/4EHS BG2144 3/8THH 1/2TBE&J TBSAFETY
60’ ROHN 45GSR
Al l par ts shown i n tabl e
CONNECTIONS
3 a re i nc l uded when order i ng
INCLUDED 250’ 6 6 3
Par t No: 45GS R 110R 060
ANCHORS & GAC3455TOP AGK1GGX BGK3GGX CPC.5/.75
48’ GROUNDING
P/N: 45GSR110R060 INCLUDED 3 1 3 3

70’ TOWER
GA45GD FDNS
57.2 OR 42.4 45GSR20 45GSR10 45GSRSB
65’ TOWER PARTS BASE ANCHOR
INCLUDED 3 1 1 2 FB2G AB2
86’
1/4” EHS
GUYS & BG2144
70’ ROHN 45GSR
(665#) 1/4EHS 3/8THH 1/2TBE&J TBSAFETY Al l par ts shown i n tabl e
35’
66’
CONNECTIONS a re i nc l ud ed when ord er i ng
INCLUDED 500’ 12 12 6 3
Par t No: 45GS R 110R 070
ANCHORS & GAC3455TOP AGK1GGX BGK3GGX CPC.5/.75
56’ GROUNDING
P/N: 45GSR110R070 INCLUDED 3 1 3 3

80’ TOWER
GA45GD FDNS
45GSR20 45GSRSB
75’
52.7 OR 35.5 TOWER PARTS BASE ANCHOR
INCLUDED 4 1 2 FB2G AB2
99’
1/4” EHS
(665#) GUYS & 1/4EHS BG2144 3/8THH 1/2TBE&J TBSAFETY 80’ ROHN 45GSR
CONNECTIONS Al l par ts shown i n tabl e
35’
73’
550’ 12 12 6 3 a re i nc l uded when order i ng
INCLUDED
Par t No: 45GS R 110R 080
ANCHORS & GAC3455TOP AGK1GGX BGK3GGX CPC.5/.75
64’ GROUNDING
P/N: 45GSR110R080 INCLUDED 3 1 3 3

Phone (309) 566-3000 • Fax (309) 566-3079 • www.rohnnet.com • The Industry Standard
79
© 2011 ROHN PRODUCTS LLC
G GUYED TOWERS - 45GSR

S TA N D A R D D E S I G N - 4 5 G S R

45GSR
1 1 0 M P H R E V. G
90’ TOWER
GA45GD FDNS SOLID ROD
45GSR20 45GSR10 45GSRSB
85’
49.4 OR 33.0
TOWER PARTS BASE ANCHOR
INCLUDED 4 1 1 2 FB2G AB2
111’
1/4” EHS
(665#) GUYS & 1/4EHS BG2144 3/8THH 1/2TBE&J TBSAFETY
90’ ROHN 45GSR
Al l par ts shown i n tabl e
45’ CONNECTIONS
85’
3 a re i nc l ud ed when ord er i ng
INCLUDED 625’ 12 12 6
Pa r t No: 45GS R 110R 090
ANCHORS & GAC3455TOP AGK1GGX BGK3GGX CPC.5/.75
72’ GROUNDING
P/N: 45GSR110R090 INCLUDED 3 1 3 3

100’ TOWER
GA45GD FDNS
45GSR20 45GSRSB
88’
44.5 OR 32.6
TOWER PARTS BASE ANCHOR
INCLUDED 5 1 2 FB2G AB2
119’
5/16”EHS 100’ ROHN 45GSR
(1,120#) 1/4EHS 142265 3/8THH 1/2TBE&J 5/8TBE&J Al l par ts shown i n tabl e
55’
97’ GUYS & a re i nc l uded when order i ng
1/4”EHS
(665#) 325’ 400’ 6 3 3
CONNECTIONS Pa r t No: 45GS R 110R 100
INCLUDED 7/16THH BG2144 BG2146 TBSAFETY
80’
P/N: 45GSR110R100 6 6 6 3
ANCHORS & GAC3455TOP AGK1GGX BGK3GGX CPC.5/.75
GROUNDING
INCLUDED 3 1 3 3

110’ TOWER FDNS

45GSR20 45GSR10 45GSRSB GA45GD BASE ANCHOR
98’
43.0 OR 31.7 TOWER PARTS
INCLUDED 5 1 3 FB2G AB2
132’ 1
5/16”EHS
65’
(1,120#) 1/4EHS 142265 3/8THH 1/2TBE&J 5/8TBE&J
109’ 1/4” EHS
GUY WIRE & 110’ ROHN 45GSR
(665#) 650’ 425’ 12 6 3 Al l par ts shown i n tabl e
CONNECTION
35’ 95’
7/16THH BG2144 BG2146 TBSAFETY a re i nc l uded when order i ng
INCLUDED
Pa r t No: 45GS R 110R 110
88’
P/N: 45GSR110R110 6 12 6 3
ANCHORS & GAC3455TOP AGK1GGX BGK3GGX CPC.5/.75
GROUNDING
INCLUDED 3 1 3 3

120’ TOWER
GA45GD FDNS
45GSR20 45GSRSB
108’
41.4 OR 30.7
TOWER PARTS BASE ANCHOR
INCLUDED 6 1 3 FB2G AB2
144’
5/16”EHS 120’ ROHN 45GSR
75’
(1,120#) 1/4EHS 142265 3/8THH 1/2TBE&J 5/8TBE&J Al l par ts shown i n tabl e
122’ 1/4” EHS
GUYS & a re i nc l uded when order i ng
(665#) 725’ 475’ 12 6 3
CONNECTIONS Pa r t No: 45GS R 110R 120
35’ 102’
INCLUDED 7/16THH BG2144 BG2146 TBSAFETY
96’
P/N: 45GSR110R120 6 12 6 3
ANCHORS & GAC3455TOP AGK1GGX BGK3GGX CPC.5/.75
GROUNDING
INCLUDED 3 1 3 3

80 Phone (309) 566-3000 • Fax (309) 566-3079 • www.rohnnet.com • The Industry Standard
© 2011 ROHN PRODUCTS LLC
 GUYED TOWERS - 45GSR G
S TA N D A R D D E S I G N - 4 5 G S R
1 1 0 M P H R E V. G

118’
130’ TOWER
40.5 OR 29.9 TOWER PARTS
INCLUDED
45GSR20 45GSR10
FDNS
45GSRSB GA45GD BASE ANCHOR 45GSR
SOLID ROD
157’
6 1 1 3 FB2G AB2
5/16” EHS
85’ (1,120#) 1/4EHS 142265 3/8THH 1/2TBE&J 5/8TBE&J
134’
GUYS & 130’ ROHN 45GSR
1/4” EHS
(665#) 800’ 500’ 12 6 3 All par ts shown i n tabl e
CONNECTIONS
45’ 113’
7/16THH BG2144 BG2146 TBSAFETY a re i nc l uded when order i ng
INCLUDED
Par t No: 45GS R 110R 130
104’
P/N: 45GSR110R130 6 12 6 3
ANCHORS & GAC3455TOP AGK1GGX BGK3GGX CPC.5/.75
GROUNDING
INCLUDED 3 1 3 3

140’ TOWER
GA45GD FDNS
45GSR20 45GSRSB
128’
39.4 OR 29.3 TOWER PARTS BASE ANCHOR
INCLUDED 7 1 3 FB2G AB2
170’
5/16” EHS 140’ ROHN 45GSR
95’
(1,120#) 1/4EHS 142265 3/8THH 1/2TBE&J 5/8TBE&J All par ts shown i n tabl e
147’ 1/4” EHS
GUYS & a re i nc l uded when order i ng
(665#) 875’ 550’ 12 6 3
CONNECTIONS Par t No: 45GS R 110R 140
55’ 125’
INCLUDED 7/16THH BG2144 BG2146 TBSAFETY
112’
P/N: 45GSR110R140 6 12 6 3
ANCHORS & GAC3455TOP AGK1GGX BGK3GGX CPC.5/.75
GROUNDING
INCLUDED 3 1 3 3

150’ TOWER FDNS

45GSR20 45GSR10 45GSRSB GA45GD BASE ANCHOR
138’
38.3 OR 28.7
TOWER PARTS
INCLUDED 7 1 4 FB2G AB3
183’ 1
105’
5/16” EHS
159’ (1,120#) 1/4EHS 142265 3/8THH 5/8TBE&J
65’ 1/4” EHS
GUYS & 150’ ROHN 45GSR
136’
(665#) 1350’ 600’ 18 12 All par ts shown i n tabl e
125’
CONNECTIONS
35’
7/16THH BG2144 BG2146 TBSAFETY a re i nc l ud ed when ord er i ng
INCLUDED
Par t No: 45GS R 110R 150
120’
P/N: 45GSR110R150 6 18 6 3
ANCHORS & GAC5655TOP AGK1GGX BGK3GGX CPC1/1.25
GROUNDING
INCLUDED 3 1 3 3

160’ TOWER
GA45GD FDNS
45GSR20 45GSRSB
37.5 OR 28.2 TOWER PARTS BASE ANCHOR
148’
INCLUDED 8 1 4 FB2G AB3
196’
115’ 5/16” EHS 160’ ROHN 45GSR
172’ (1,120#) 1/4EHS 142265 3/8THH 5/8TBE&J All par ts shown i n tabl e
75’ a re i nc l uded when order i ng
148’ 1/4” EHS
(665#) GUYS & 1450’ 625’ 18 12
CONNECTIONS Par t No: 45GS R 110R 160
133’
35’
INCLUDED 7/16THH BG2144 BG2146 TBSAFETY
128’
P/N: 45GSR110R160 6 18 6 3
ANCHORS & GAC5655TOP AGK1GGX BGK3GGX CPC1/1.25
GROUNDING
INCLUDED 3 1 3 3

Phone (309) 566-3000 • Fax (309) 566-3079 • www.rohnnet.com • The Industry Standard
81
© 2011 ROHN PRODUCTS LLC
G GUYED TOWERS - 45GSR

S TA N D A R D D E S I G N - 4 5 G S R

45GSR
1 1 0 M P H R E V. G
170’ TOWER FDNS
45GSR20 45GSR10 45GSRSB GA45GD BASE ANCHOR SOLID ROD
36.8 OR 27.8 TOWER PARTS
158’
INCLUDED 8 1 4 FB2G AB3
208’ 1
125’
185’ 5/16” EHS
(1,120#) 1/4EHS 142265 3/8THH 5/8TBE&J
85’
GUYS & 170’ ROHN 45GSR
160’ 1/4” EHS
(665#) 1575’ 675’ 18 12 Al l par ts shown i n tabl e
CONNECTIONS
45’ 143’
7/16THH BG2144 BG2146 TBSAFETY a re i n cl uded when order i ng
INCLUDED
Pa r t No: 45GS R 110R 170
136’
P/N: 45GSR110R170 6 18 6 3
ANCHORS & GAC5655TOP AGK1GGX BGK3GGX CPC1/1.25
GROUNDING
INCLUDED 3 1 3 3

180’ TOWER
GA45GD FDNS
45GSR20 45GSRSB
168’
35.7 OR 27.3 TOWER PARTS BASE ANCHOR
INCLUDED 9 1 4 FB2G AB3
221’
135’
5/16” EHS 180’ ROHN 45GSR
197’ (1,120#) 1/4EHS 142265 3/8THH 5/8TBE&J Al l p ar ts shown i n tabl e
95’ 1/4” EHS
GUYS & a re i n c l uded when order i ng
173’
(665#) 1675’ 725’ 18 12
CONNECTIONS Pa r t No: 45GS R 110R 180
55’ 154’
INCLUDED 7/16THH BG2144 BG2146 TBSAFETY
144’
P/N: 45GSR110R180 6 18 6 3
ANCHORS & GAC5655TOP AGK1GGX BGK3GGX CPC1/1.25
GROUNDING
INCLUDED 3 1 3 3

190’ TOWER FDNS

45GSR20 45GSR10 45GSRSB GA45GD BASE ANCHOR
178’
35.1 OR 26.9 TOWER PARTS
INCLUDED 9 1 5 FB2G AB3
145’ 234’ 1
210’ 5/16” EHS
(1,120#) 1/4EHS 142265 3/8THH 5/8TBE&J
105’
185’
GUYS & 190’ ROHN 45GSR
65’ 1/4” EHS
(665#) 2300’ 750’ 24 15 Al l p ar ts shown i n tabl e
165’
CONNECTIONS
35’ 156’
7/16THH BG2144 BG2146 TBSAFETY a re i n c l uded when order i ng
INCLUDED
Pa r t No: 45GS R 110R 190
152’
P/N: 45GSR110R190 6 24 6 3
ANCHORS & GAC5655TOP AGK1GGX BGK3GGX CPC1/1.25
GROUNDING
INCLUDED 3 1 3 3

200’ TOWER
FDNS
34.6 OR 26.6 45GSR20 45GSRSB GA45GD APL4A BASE ANCHOR
188’ TOWER PARTS
INCLUDED 10 1 5 1 FB2G AB4
155’ 247’
5/16” EHS 200’ ROHN 45GSR
115’
223’ (1,120#)
1/4EHS 142265 3/8THH 5/8TBE&J Al l p ar ts shown i n tabl e
197’ 1/4” EHS
GUYS & a re i n c l uded when order i ng
75’
177’
(665#) 2425’ 800’ 24 15
CONNECTIONS Pa r t No: 45GS R 110R 200
35’ 164’
INCLUDED 7/16THH BG2144 BG2146 TBSAFETY
160’
P/N: 45GSR110R200 6 24 6 3
ANCHORS & GAC5655TOP AGK1GGX BGK3GGX CPC1/1.25
GROUNDING
INCLUDED 3 1 3 3

82 Phone (309) 566-3000 • Fax (309) 566-3079 • www.rohnnet.com • The Industry Standard
© 2011 ROHN PRODUCTS LLC
 GUYED TOWERS - 45GSR G
S TA N D A R D D E S I G N - 4 5 G S R
1 1 0 M P H R E V. G

208’
220’ TOWER
33.3 OR 25.8 TOWER PARTS
FDNS
45GSR20 45GSRSB GA45GD APL4A BASE ANCHOR
45GSR
SOLID ROD
INCLUDED 11 1 5 1 FB2G AB4
175’ 273’
5/16” EHS 220’ ROHN 45GSR
248’ (1,120#) 1/4EHS 142265 3/8THH 5/8TBE&J Al l par ts shown i n tabl e
135’
222’
GUYS & a re i nc l ud ed when ord er i ng
95’ 1/4” EHS
(665#) 2725’ 875’ 24 15
200’
CONNECTIONS Par t No: 45GS R 110R 220
55’ 184’
INCLUDED 7/16THH BG2144 BG2146 TBSAFETY
176’
P/N: 45GSR110R220 6 24 6 3
ANCHORS & GAC5655TOP AGK1GGX BGK3GGX CPC1/1.25
GROUNDING
INCLUDED 3 1 3 3

240’ TOWER
45GSR20 45GSRSB GA45GD APL4A BASE ANCHOR
INNER OUTER
228’
32.2 OR 25.1 TOWER PARTS ANCHOR
195’
INCLUDED 12 1 6 1 FB2G AB2 AB3
298’ 5/16” EHS
155’ 274’ (1,120#)
247’
1/4EHS 142265 BG2144 BG2146 3/8THH 240’ ROHN 45GSR
115’ 1/4” EHS
(665#) GUYS & Al l par ts shown i n
75’ 150’ CONNECTIONS 2850’ 950’ 30 6 30 ta b l e are i nc l uded
122’
35’
102’ INCLUDED 7/16THH 5/8TBE&J 1/2TBE&J CPC.5/.75 CPC1/1.25 when ord er i ng
Pa r t No: 45GS R 110R 240
96’ 192’
P/N: 45GSR110R240 6 9 9 3 3
ANCHORS & GAC3455TOP GAC5655TOP AGK1GGX BGK3GGX TBSAFETY
GROUNDING
INCLUDED 3 3 2 3 6

260’ TOWER
31.0 OR 24.5 45GSR20 45GSRSB GA45GD APL4A BASE ANCHOR
INNER OUTER
248’ TOWER PARTS ANCHOR
215’
INCLUDED 13 1 6 1 FB2G AB2 AB3
324’ 5/16” EHS
175’ 299’ (1,120#) 260’ ROHN 45GSR
272’ 1/4EHS 142265 BG2144 BG2146 3/8THH Al l par ts shown i n tabl e
135’ 1/4” EHS
(665#) GUYS & a re i nc l uded when order i ng
95’ 175’
CONNECTIONS 3250’ 1050’ 30 6 30 Par t No: 45GS R 110R 260
147’
55’
125’ INCLUDED 7/16THH 5/8TBE&J 1/2TBE&J CPC.5/.75 CPC1/1.25
112’ 208’
P/N: 45GSR110R260 6 9 9 3 3
ANCHORS & GAC3455TOP GAC5655TOP AGK1GGX BGK3GGX TBSAFETY
GROUNDING
INCLUDED 3 3 2 3 6

280’ TOWER
45GSR20 45GSRSB GA45GD APL4A BASE ANCHOR
INNER OUTER
268’
30.4 OR 24.0 TOWER PARTS ANCHOR
INCLUDED 14 1 7 1 FB2G AB2 AB4
235’ 349’ 5/16” EHS
325’ (1,120#) 280’ ROHN 45GSR
195’
297’
1/4EHS 142265 BG2144 BG2146 3/8THH Al l par ts shown i n tabl e
155’ 1/4” EHS
(665#) GUYS & a re i nc l uded when order i ng
272’
CONNECTIONS 4050’ 1125’ 36 6 36 Par t No: 45GS R 110R 280
115’
150’
75’
122’ INCLUDED 7/16THH 5/8TBE&J 1/2TBE&J CPC.5/.75 CPC1/1.25
35’
102’
96’ 224’
P/N: 45GSR110R280 6 12 9 3 3
ANCHORS & GAC3455TOP GAC5655TOP AGK1GGX BGK3GGX TBSAFETY
GROUNDING
INCLUDED 3 3 2 3 6

Phone (309) 566-3000 • Fax (309) 566-3079 • www.rohnnet.com • The Industry Standard
83
© 2011 ROHN PRODUCTS LLC
G GUYED TOWERS - 45GSR

S TA N D A R D D E S I G N - 4 5 G S R

45GSR
1 1 0 M P H R E V. G
300’ TOWER
45GSR20 45GSRSB GA45GD APL4A BASE ANCHOR
INNER OUTER
SOLID ROD
288’
29.7 OR 23.5 TOWER PARTS ANCHOR
INCLUDED 15 1 7 1 FB2G AB2 AB4
248’ 375’
5/16” EHS
345’ (1,120#) 300’ ROHN 45GSR
215’
322’
1/4EHS 142265 BG2144 BG2146 3/8THH Al l par ts shown i n tabl e
175’ 1/4” EHS
(665#) GUYS & a re i nc l ud ed when ord er i ng
297’
CONNECTIONS 3400’ 2300’ 30 12 30 Pa r t No: 45GS R 110R 300
135’
175’
95’
147’
INCLUDED 7/16THH 5/8TBE&J 1/2TBE&J CPC.5/.75 CPC1/1.25
55’
125’ 112’ 240’
P/N: 45GSR110R300 12 12 9 3 3
ANCHORS & GAC3455TOP GAC5655TOP AGK1GGX BGK3GGX TBSAFETY
GROUNDING
INCLUDED 3 3 2 3 6

320’ TOWER
45GSR20 45GSRSB GA45GD APL4A BASE ANCHOR
INNER OUTER
308’
28.9 OR 23.0 TOWER PARTS ANCHOR
401’ 3/8”EHS
(1,540#)
INCLUDED 15 1 7 1 FB2G AB3 AB4
268’
371’ 5/16” EHS 320’ ROHN 45GSR
235’
348’
(1,120#)
1/4” EHS
1/4EHS 142265 142261 BG2144 BG2146 BG2147 5/8S Al l par ts shown i n tabl e
195’ (665#)
GUYS & a re i nc l ud ed when ord er i ng
155’
322’
CONNECTIONS 4225’ 1200’ 1300’ 36 6 6 3 Pa r t No: 45GS R 110R 320
115’ 201’
75’ 172’ INCLUDED 1/2THH 3/8THH 7/16THH 5/8TBE&J 5/8S 45GSR20L82*
148’
35’
133’ 128’ 256’
P/N: 45GSR110R320 6 36 6 24 3 1
ANCHORS & GAC5655TOP AGK1GGX BGK3GGX CPC1/1.25 TBSAFETY
GROUNDING
INCLUDED 6 2 3 6 6

340’ TOWER
45GSR20 45GSRSB GA45GD APL4A BASE ANCHOR
INNER OUTER
328’
28.1 OR 22.6 TOWER PARTS ANCHOR
426’ 3/8”EHS INCLUDED 16 1 7 1 FB2G AB3 AB4
288’ (1,540#)
396’ 5/16” EHS 340’ ROHN 45GSR
255’
373’
(1,120#) 1/4EHS 142265 142261 BG2144 BG2146 BG2147 5/8S Al l par ts shown i n tabl e
215’ 1/4” EHS
(665#) GUYS & a re i nc l ud ed when ord er i ng
175’
347’
CONNECTIONS 4700’ 1275’ 1375’ 36 6 6 3 Pa r t No: 45GS R 110R 340
135’ 227’
95’ 197’ INCLUDED 1/2THH 3/8THH 7/16THH 5/8TBE&J 5/8S 45GSR20L82*
173’
55’
154’ 144’ 272’
P/N: 45GSR110R340 6 36 6 24 3 1
ANCHORS & GAC5655TOP AGK1GGX BGK3GGX CPC1/1.25 TBSAFETY
GROUNDING
INCLUDED 6 2 3 6 6

* Guy lug sections required for 3/8” guys.

84 Phone (309) 566-3000 • Fax (309) 566-3079 • www.rohnnet.com • The Industry Standard
© 2011 ROHN PRODUCTS LLC
 GUYED TOWERS - 45GSR G
S TA N D A R D D E S I G N - 4 5 G S R

45GSR
1 3 0 M P H R E V. G
40’ TOWER
45GSR20 45GSRSB GA45GD FDNS SOLID ROD
35’
47.3 OR 33.5 TOWER PARTS BASE ANCHOR
INCLUDED 2 1 1 FB2G AB2
47’
1/4” EHS
(665#) GUYS & 1/4EHS BG2144 3/8THH 1/2TBE&J TBSAFETY 40’ ROHN 45GSR
Al l par ts shown i n tabl e
CONNECTIONS
150’ 6 6 3 3 a re i nc l uded when order i ng
INCLUDED
Par t No: 45GS R 130R 040
ANCHORS & GAC3455TOP AGK1GGX BGK3GGX CPC.5/.75
32’ GROUNDING
P/N: 45GSR130R040 INCLUDED 3 1 3 3

50’ TOWER
GA45GD FDNS
45GSR20 45GSR10 45GSRSB
45’
44.1 OR 28.6 TOWER PARTS BASE ANCHOR
INCLUDED 2 1 1 1 FB2G AB2
60’
1/4” EHS
(665#) GUYS & 1/4EHS BG2144 3/8THH 1/2TBE&J TBSAFETY 50’ ROHN 45GSR
Al l par ts shown i n tabl e
CONNECTIONS
200’ 6 6 3 3 a re i nc l ud ed when ord er i ng
INCLUDED
Par t No: 45GS R 90R 050
ANCHORS & GAC3455TOP AGK1GGX BGK3GGX CPC.5/.75
40’ GROUNDING
P/N: 45GSR130R050 INCLUDED 3 1 3 3

60’ TOWER
GA45GD FDNS
45GSR20 45GSRSB
48’
35.0 OR 24.0
TOWER PARTS BASE ANCHOR
INCLUDED 3 1 1 FB2G AB2
68’
5/16” EHS
(1,120#) GUYS & 142265 BG2146 7/16THH 5/8TBE&J TBSAFETY
60’ ROHN 45GSR
Al l par ts shown i n tabl e
CONNECTIONS
3 a re i nc l uded when order i ng
INCLUDED 225’ 6 6 3
Par t No: 45GS R 90R 060
ANCHORS & GAC3455TOP AGK1GGX BGK3GGX CPC.5/.75
48’ GROUNDING
P/N: 45GSR130R060 INCLUDED 3 1 3 3

70’ TOWER
GA45GD FDNS
33.2 OR 22.8 45GSR20 45GSR10 45GSRSB
58’ TOWER PARTS BASE ANCHOR
INCLUDED 3 1 1 2 FB2G AB2
81’
5/16” EHS
(1,120#)
1/4EHS 142265 BG2144 BG2146 3/8THH
35’ 1/4” EHS
66’ (665#)
GUYS & 225’ 275’ 6 6 6 70’ ROHN 45GSR
CONNECTIONS Al l par ts shown i n tabl e
INCLUDED 7/16THH 1/2TBE&J 5/8TBE&J TBSAFETY a re i nc l ud ed when ord er i ng
56’ Par t No: 45GS R 130R 070
P/N: 45GSR130R070 6 3 3 3
ANCHORS & GAC3455TOP AGK1GGX BGK3GGX CPC.5/.75
GROUNDING
INCLUDED 3 1 3 3

Phone (309) 566-3000 • Fax (309) 566-3079 • www.rohnnet.com • The Industry Standard
85
© 2011 ROHN PRODUCTS LLC
G GUYED TOWERS - 45GSR

S TA N D A R D D E S I G N - 4 5 G S R

45GSR
1 3 0 M P H R E V. G
80’ TOWER FDNS
31.5 OR 21.9 TOWER PARTS
45GSR20 45GSRSB GA45GD
BASE ANCHOR
SOLID ROD
68’
INCLUDED 4 1 2 FB2G AB2
93’
5/16” EHS
(1,120#)
1/4EHS 142265 BG2144 BG2146 3/8THH
35’
73’ 1/4” EHS
GUYS &
80’ ROHN 45GSR
(665#) 250’ 300’ 6 6 6 Al l p ar ts shown i n tabl e
CONNECTIONS
a re i n c l ud ed when ord er i ng
INCLUDED 7/16THH 1/2TBE&J 5/8TBE&J TBSAFETY Pa r t No: 45GS R 130R 080
64’
P/N: 45GSR130R080 6 3 3 3
ANCHORS & GAC3455TOP AGK1GGX BGK3GGX CPC.5/.75
GROUNDING
INCLUDED 3 1 3 3

90’ TOWER
GA45GD FDNS
45GSR20 45GSR10 45GSRSB
30.2 OR 21.1 TOWER PARTS BASE ANCHOR
78’
INCLUDED 4 1 1 2 FB2G AB2
106’
5/16” EHS
(1,120#) 1/4EHS 142265 BG2144 BG2146 3/8THH
45’
85’ 1/4” EHS
GUYS & 275’ 350’
90’ ROHN 45GSR
(665#) 6 6 6 Al l p ar ts shown i n tabl e
CONNECTIONS
a re i n c l ud ed when ord er i ng
INCLUDED 7/16THH 1/2TBE&J 5/8TBE&J TBSAFETY
Pa r t No: 45GS R 130R 090
72’
P/N: 45GSR130R090 6 3 3 3
ANCHORS & GAC3455TOP AGK1GGX BGK3GGX CPC.5/.75
GROUNDING
INCLUDED 3 1 3 3

100’ TOWER
GA45GD FDNS
45GSR20 45GSRSB
88’
29.1 OR 20.5
TOWER PARTS BASE ANCHOR
INCLUDED 5 1 2 FB2G AB2
119’
5/16” EHS
(1,120#) 1/4EHS 142265 BG2144 BG2146 3/8THH
55’
97’
GUYS &
100’ ROHN 45GSR
1/4”EHS
(665#) 325’ 400’ 6 6 6 Al l par ts shown i n tabl e
CONNECTIONS
a re i n cl ud ed when ord er i ng
INCLUDED 7/16THH 1/2TBE&J 5/8TBE&J TBSAFETY Pa r t No: 45GS R 130R 100
80’
P/N: 45GSR130R100 6 3 3 3
ANCHORS & GAC3455TOP AGK1GGX BGK3GGX CPC.5/.75
GROUNDING
INCLUDED 3 1 3 3

110’ TOWER
GA45GD FDNS
45GSR20 45GSR10 45GSRSB
28.0 OR 19.9 TOWER PARTS BASE ANCHOR
98’
INCLUDED 5 1 1 3 FB2G AB3
132’
5/16” EHS
65’
(1,120#)
1/4EHS 142265 BG2144 BG2146
109’ 1/4” EHS
GUYS & 650’ 425’
110’ ROHN 45GSR
(665#) 12 6 Al l par ts shown i n tabl e
CONNECTIONS
35’ 95’ a re i n cl ud ed when ord er i ng
INCLUDED 3/8THH 7/16THH 5/8TBE&J TBSAFETY
Pa r t No: 45GS R 130R 110
88’
P/N: 45GSR130R110 12 6 9 3
ANCHORS & GAC5655TOP AGK1GGX BGK3GGX CPC1/1.25
GROUNDING
INCLUDED 3 1 3 3

86 Phone (309) 566-3000 • Fax (309) 566-3079 • www.rohnnet.com • The Industry Standard
© 2011 ROHN PRODUCTS LLC
 GUYED TOWERS - 45GSR G
S TA N D A R D D E S I G N - 4 5 G S R
1 3 0 M P H R E V. G

108’
120’ TOWER
27.0 OR 19.3 TOWER PARTS
INCLUDED
45GSR20 45GSRSB GA45GD FDNS
BASE ANCHOR
45GSR
SOLID ROD
144’ 6 1 3 FB2G AB3
5/16” EHS
75’
(1,120#) 1/4EHS 142265 BG2144 BG2146
122’
GUYS &
120’ ROHN 45GSR
1/4” EHS
(665#) 725’ 475’ 12 6 Al l par ts shown i n tabl e
CONNECTIONS
35’ 102’ a re i nc l ud ed when ord er i ng
INCLUDED 3/8THH 7/16THH 5/8TBE&J TBSAFETY Pa r t No: 45GS R 130R 120
96’
P/N: 45GSR130R120 12 6 9 3
ANCHORS & GAC5655TOP AGK1GGX BGK3GGX CPC1/1.25
GROUNDING
INCLUDED 3 1 3 3

130’ TOWER
GA45GD FDNS
45GSR20 45GSR10 45GSRSB
118’
26.3 OR 18.7 TOWER PARTS BASE ANCHOR
INCLUDED 6 1 1 3 FB2G AB3
157’
5/16” EHS
85’ (1,120#) 1/4EHS 142265 BG2144 BG2146
134’
1/4” EHS
GUYS & 800’ 500’
130’ ROHN 45GSR
(665#) 12 6 Al l par ts shown i n tabl e
45’ 113’
CONNECTIONS
a re i nc l ud ed when ord er i ng
INCLUDED 3/8THH 7/16THH 5/8TBE&J TBSAFETY
Pa r t No: 45GS R 130R 130
104’
P/N: 45GSR130R130 12 6 9 3
ANCHORS & GAC5655TOP AGK1GGX BGK3GGX CPC1/1.25
GROUNDING
INCLUDED 3 1 3 3

140’ TOWER
GA45GD FDNS
45GSR20 45GSRSB
25.6 OR 18.4 TOWER PARTS BASE ANCHOR
128’
INCLUDED 7 1 3 FB2G AB3
170’
5/16” EHS
95’
(1,120#) 1/4EHS 142265 BG2144 BG2146
147’ 1/4” EHS
GUYS &
140’ ROHN 45GSR
(665#) 875’ 550’ 12 6 Al l par ts shown i n tabl e
CONNECTIONS
55’ 125’ a re i nc l ud ed when ord er i ng
INCLUDED 3/8THH 7/16THH 5/8TBE&J TBSAFETY Pa r t No: 45GS R 130R 140
112’
P/N: 45GSR130R140 12 6 9 3
ANCHORS & GAC5655TOP AGK1GGX BGK3GGX CPC1/1.25
GROUNDING
INCLUDED 3 1 3 3

150’ TOWER
GA45GD FDNS
45GSR20 45GSR10 45GSRSB
24.7 OR 18.0 TOWER PARTS BASE ANCHOR
138’
INCLUDED 7 1 1 4 FB2G AB4
183’
105’
5/16” EHS
159’ (1,120#) 1/4EHS 142265 BG2144 BG2146
65’ 1/4” EHS
GUYS & 1350’ 600’
150’ ROHN 45GSR
136’
(665#) 18 6 Al l par ts shown i n tabl e
35’ 125’
CONNECTIONS
a re i nc l ud ed when ord er i ng
INCLUDED 3/8THH 7/16THH 3/4TBE&J TBSAFETY
Pa r t No: 45GS R 130R 150
120’
P/N: 45GSR130R150 18 6 12 3
ANCHORS & GAC5755TOP AGK1GGX BGK3GGX CPC1.5/2
GROUNDING
INCLUDED 3 1 3 3

Phone (309) 566-3000 • Fax (309) 566-3079 • www.rohnnet.com • The Industry Standard
87
© 2011 ROHN PRODUCTS LLC
G GUYED TOWERS - 45GSR

S TA N D A R D D E S I G N - 4 5 G S R

45GSR
1 3 0 M P H R E V. G
160’ TOWER
GA45GD FDNS
24.0 OR 17.7 TOWER PARTS
45GSR20 45GSRSB BASE ANCHOR SOLID ROD
148’
INCLUDED 8 1 4 FB2G AB4
196’
115’ 5/16” EHS
172’ (1,120#) 1/4EHS 142265 BG2144 BG2146
75’ 1/4” EHS
GUYS &
160’ ROHN 45GSR
148’
(665#) 1450’ 625’ 18 6 Al l par ts shown i n tabl e
133’ CONNECTIONS
35’ a re i n c l u d ed when ord er i ng
INCLUDED 3/8THH 7/16THH 3/4TBE&J TBSAFETY Pa r t No: 45GS R 130R 160
128’
P/N: 45GSR130R160 18 6 12 3
ANCHORS & GAC5755TOP AGK1GGX BGK3GGX CPC1.5/2
GROUNDING
INCLUDED 3 1 3 3

170’ TOWER
GA45GD FDNS
45GSR20 45GSR10 45GSRSB
23.4 OR 17.3 TOWER PARTS BASE ANCHOR
158’
INCLUDED 8 1 1 4 FB2G AB4
208’
125’
185’ 5/16” EHS
(1,120#)
1/4EHS 142265 BG2144 BG2146
85’
GUYS & 1575’ 675’
170’ ROHN 45GSR
160’ 1/4” EHS
(665#)
18 6 Al l par ts shown i n tabl e
143’
CONNECTIONS
45’ a re i n c l u d ed when ord er i ng
INCLUDED 3/8THH 7/16THH 3/4TBE&J TBSAFETY
Pa r t No: 45GS R 130R 170
136’
P/N: 45GSR130R170 18 6 12 3
ANCHORS & GAC5755TOP AGK1GGX BGK3GGX CPC1.5/2
GROUNDING
INCLUDED 3 1 3 3

180’ TOWER
GA45GD FDNS
45GSR20 45GSRSB
22.8 OR 16.9 TOWER PARTS BASE ANCHOR
168’
INCLUDED 9 1 4 FB2G AB4
221’
135’ 5/16” EHS
197’ (1,120#) 1/4EHS 142265 BG2144 BG2146
95’ 1/4” EHS
GUYS &
180’ ROHN 45GSR
173’
(665#) 1675’ 725’ 18 6 Al l par ts shown i n tabl e
CONNECTIONS
55’ 154’ a re i n c l u d ed when ord er i ng
INCLUDED 3/8THH 7/16THH 3/4TBE&J TBSAFETY Pa r t No: 45GS R 130R 180
144’
P/N: 45GSR130R180 18 6 12 3
ANCHORS & GAC5755TOP AGK1GGX BGK3GGX CPC1.5/2
GROUNDING
INCLUDED 3 1 3 3

190’ TOWER
GA45GD FDNS
45GSR20 45GSR10 45GSRSB
178’
22.3 OR 16.5
TOWER PARTS BASE ANCHOR
INCLUDED 9 1 1 5 FB2G AB4
145’ 234’
5/16” EHS
105’
210’ (1,120#) 1/4EHS 142265 BG2144 BG2146
185’
1/4” EHS GUYS & 2300’ 750’
190’ ROHN 45GSR
65’
165’ (665#) 24 6 Al l par ts shown i n tabl e
35’
CONNECTIONS
156’ a re i n c l u d ed when ord er i ng
INCLUDED 3/8THH 7/16THH 3/4TBE&J TBSAFETY
152’
Pa r t No: 45GS R 130R 190
P/N: 45GSR130R190 24 6 15 3
ANCHORS & GAC5755TOP AGK1GGX BGK3GGX CPC1.5/2
GROUNDING
INCLUDED 3 1 3 3

88 Phone (309) 566-3000 • Fax (309) 566-3079 • www.rohnnet.com • The Industry Standard
© 2011 ROHN PRODUCTS LLC
 GUYED TOWERS - 45GSR G
S TA N D A R D D E S I G N - 4 5 G S R
1 3 0 M P H R E V. G

188’
200’ TOWER
21.9 OR 16.2 TOWER PARTS
45GSR20 45GSRSB GA45GD APL4A FDNS
BASE ANCHOR
45GSR
SOLID ROD
INCLUDED 10 1 5 1 FB2G AB4
148’ 247’
5/16” EHS
115’
218’ (1,120#) 1/4EHS 142265 BG2144 BG2146
197’ 1/4” EHS
GUYS &
200’ ROHN 45GSR
75’
177’
(665#) 1725’ 1500’ 18 12 Al l par ts shown i n tabl e
CONNECTIONS
35’ 164’ a re i nc l ud ed when ord er i ng
INCLUDED 3/8THH 7/16THH 3/4TBE&J TBSAFETY Par t No: 45GS R 130R 200
160’
P/N: 45GSR130R200 18 12 15 3
ANCHORS & GAC5755TOP AGK1GGX BGK3GGX CPC1.5/2
GROUNDING
INCLUDED 3 1 3 3

220’ TOWER
45GSR20 45GSRSB GA45GD APL4A FDNS
208’
21.0 OR 15.5
TOWER PARTS BASE ANCHOR
INCLUDED 10 1 4 1 FB2G AB4
168’ 272’ 3/8” EHS
243’ (1,540#)
135’ 5/16” EHS 1/4EHS 142265 142261 BG2144 45GSR20L82*
(1,120#)
222’ 220’ ROHN 45GSR
95’
200’
1/4” EHS
(665#)
1950’ 775’ 875’ 18 1 Al l par ts shown i n tabl e
55’ 184’ GUYS & a re i nc l ud ed when ord er i ng
BG2146 BG2147 7/16THH 1/2THH Par t No: 45GS R 130R 220
176’ CONNECTIONS
P/N: 45GSR130R220 INCLUDED 6 6 6 6
3/8THH 5/8S 3/4TBE&J TBSAFETY

18 3 15 3
ANCHORS & GAC5755TOP AGK1GGX BGK3GGX CPC1.5/2
GROUNDING
INCLUDED 3 1 3 3

240’ TOWER INNER OUTER

45GSR20 45GSRSB GA45GD APL4A BASE ANCHOR
228’
20.2 OR 15.0 TOWER PARTS ANCHOR
INCLUDED 11 1 5 1 FB2G AB3 AB4
188’ 298’
269’ 3/8”EHS
155’
247’
(1,540#) 1/4EHS 142265 142261 BG2144 45GSR20L82*
108’ 1/4” EHS
(665#) 240’ ROHN 45GSR
75’ 144’ 5/16”EHS 1500’ 1325’ 950’ 18 1 Al l par ts shown i n tabl e
122’ (1,120#)
35’ GUYS & a re i nc l uded when order i ng
102’ BG2146 BG2147 7/16THH 1/2THH Pa r t No: 45GS R 130R 240
96’ 192’
CONNECTIONS
P/N: 45GSR130R240 INCLUDED 12 6 12 6
3/8THH 5/8S 5/8TBE&J TBSAFETY

18 3 18 6
ANCHORS & GAC5655TOP AGK1GGX BGK3GGX CPC1/1.25
GROUNDING
INCLUDED 6 2 3 6

* Guy lug section required for 3/8” guys.

Phone (309) 566-3000 • Fax (309) 566-3079 • www.rohnnet.com • The Industry Standard
89
© 2011 ROHN PRODUCTS LLC
G GUYED TOWERS - 45GSR

S TA N D A R D D E S I G N - 4 5 G S R

45GSR
1 3 0 M P H R E V. G
260’ TOWER
INNER OUTER
45GSR20 45GSRSB GA45GD APL4A BASE ANCHOR
248’
19.6 OR 14.6
TOWER PARTS ANCHOR SOLID ROD
208’
INCLUDED 12 1 5 1 FB2G AB3 AB4
324’ 3/8” EHS
175’ 294’ (1,540#)
272’ 1/4EHS 142265 142261 BG2144 45GSR20L82*
128’ 1/4” EHS
(665#) 260’ ROHN 45GSR
95’ 170’ 5/16”EHS 1750’ 1500’ 1050’ 18 1 Al l par ts shown i n tabl e
147’ (1,120#)
55’
GUYS & a re i n c luded when order i ng
125’
BG2146 BG2147 7/16THH 1/2THH Pa r t No: 45GS R 130R 260
112’ 208’ CONNECTIONS
P/N: 45GSR130R260 INCLUDED 12 6 12 6
3/8THH 5/8S 5/8TBE&J TBSAFETY

18 3 18 6
ANCHORS & GAC5655TOP AGK1GGX BGK3GGX CPC1/1.25
GROUNDING
INCLUDED 6 2 3 6

280’ TOWER INNER OUTER

45GSR20 45GSRSB GA45GD APL4A BASE ANCHOR
268’
19.0 OR 14.3 TOWER PARTS ANCHOR
INCLUDED 13 1 6 1 FB2G AB3 AB5
228’ 349’ 3/8” EHS
320’ (1,540#)
188’
292’
1/4EHS 142265 142261 BG2144 45GSR20L82*
148’ 1/4” EHS
(665#) 280’ ROHN 45GSR
268’
1200’ 2800’ 1125’ 18 1 Al l par ts shown i n tabl e
115’ 5/16”EHS
150’
75’ (1,120#)
GUYS & a re i n c luded when order i ng
35’
122’ BG2146 BG2147 7/16THH 1/2THH Pa r t No: 45GS R 130R 280
102’
96’ 224’
CONNECTIONS
P/N: 45GSR130R280 INCLUDED 18 6 18 6
3/8THH 5/8S 3/4TBE&J TBSAFETY

18 3 21 6
ANCHORS & GAC5755TOP AGK1GGX BGK3GGX CPC1.5/2
GROUNDING
INCLUDED 6 2 3 6

300’ TOWER INNER OUTER

45GSR20 45GSRSB GA45GD APL4A BASE ANCHOR
288’
18.4 OR 14.0 TOWER PARTS ANCHOR
INCLUDED 14 1 6 1 FB3G AB3 AB5
248’ 375’
3/8” EHS
345’ (1,540#)
208’
318’
1/4EHS 142265 142261 BG2144 45GSR20L82*
168’ 1/4” EHS
(665#) 300’ ROHN 45GSR
135’
293’
1425’ 3050’ 1200’ 18 1 Al l par ts shown i n tabl e
175’ 5/16”EHS
95’ (1,120#) GUYS & a re i n c luded when order i ng
55’
147’ BG2146 BG2147 7/16THH 1/2THH Pa r t No: 45GS R 130R 300
125’ 112’ 240’ CONNECTIONS
P/N: 45GSR130R300 INCLUDED 18 6 18 6
3/8THH 5/8S 3/4TBE&J TBSAFETY

18 3 21 6
ANCHORS & GAC5755TOP AGK1GGX BGK3GGX CPC1.5/2
GROUNDING
INCLUDED 6 2 3 6

* Guy lug section required for 3/8” guys.

90 Phone (309) 566-3000 • Fax (309) 566-3079 • www.rohnnet.com • The Industry Standard
© 2011 ROHN PRODUCTS LLC
 GUYED TOWERS - 45GSR G
S TA N D A R D D E S I G N - 4 5 G S R
1 3 0 M P H R E V. G

308’
320’ TOWER
17.8 OR 13.8 TOWER PARTS
INNER OUTER
45GSR20 45GSRSB GA45GD APL4A BASE ANCHOR ANCHOR
45GSR
SOLID ROD
INCLUDED 14 1 6 1 FB3G AB3 AB5
268’ 400’ 3/8” EHS
371’ (1,540#)
228’
343’
1/4EHS 142265 142261 BG2144 45GSR20L82*
188’ 1/4” EHS
(665#) 320’ ROHN 45GSR
148’
318’
5/16”EHS
1450’ 2750’ 2475’ 18 2 Al l par ts shown i n tabl e
115’ 196’ (1,120#)
172’ GUYS & a re i nc l ud ed when ord er i ng
75’
148’ BG2146 BG2147 7/16THH 1/2THH Pa r t No: 45GS R 130R 320
35’
133’ 128’ 256’ CONNECTIONS
P/N: 45GSR130R320 INCLUDED 18 12 18 12
3/8THH 5/8S 3/4TBE&J TBSAFETY

18 6 24 6
ANCHORS & GAC5755TOP AGK1GGX BGK3GGX CPC1.5/2
GROUNDING
INCLUDED 6 2 3 6

340’ TOWER INNER OUTER

45GSR20 45GSRSB GA45GD APL4A BASE ANCHOR
328’
17.4 OR 12.5 TOWER PARTS ANCHOR
INCLUDED 14 1 5 1 FB3G AB4 AB5
288’ 426’ 3/8” EHS
396’ (1,540#)
248’
368’
1/4EHS 142265 142261 BG2144 45GSR20L82*
208’ 1/4” EHS
342’ (665#) 340’ ROHN 45GSR
168’ 1675’ 1800’ 3800’ 18 3 Al l par ts shown i n tabl e
221’ 5/16”EHS
135’ (1,120#)
197’ GUYS & a re i nc l ud ed when ord er i ng
95’
173’ BG2146 BG2147 7/16THH 1/2THH Par t No: 45GS R 130R 340
55’
154’ 144’ 272’ CONNECTIONS
P/N: 45GSR130R340 INCLUDED 12 18 12 18
3/8THH 5/8S 3/4TBE&J TBSAFETY

18 9 24 6
ANCHORS & GAC5755TOP AGK1GGX BGK3GGX CPC1.5/2
GROUNDING
INCLUDED 6 2 3 6

* Guy lug section required for 3/8” guys.

Phone (309) 566-3000 • Fax (309) 566-3079 • www.rohnnet.com • The Industry Standard
91
© 2011 ROHN PRODUCTS LLC
 G GUYED TOWERS - 45GSR

PA R T S & A CC E S S O R I E S
LIGHTNING ROD
LRCL
5’ COPPER CLAD
ORDERED SEPARATELY.

17”

LEG MOUNTED
BEACON PLATE KIT
APL4A
FOR MOUNTING BEACON OR
LIGHTNING ROD TAPERED BASE
LIGHTNING ROD. BOLTS TO PLATE KIT 45GSRTBPP* 3’ SIDE ARM WITH (2) TIE BACKS
TOP OF STANDARD SECTION. VW132 FOR USE WITH PIER PIN (3/4X12PP) AND KY1653A
INCLUDES BEACON PLATE, INCLUDES: LIGHTNING ROD PLATE, BEARING PLATE (BP6) SOLD SEPARATELY. MOUNTING TUBE PROVIDED IS 3’ LONG,
(2) CAP PLATES, NUTS AND BOLTS. NUTS AND BOLTS. 2 - 3/8” O.D.

Beacon Plate

Ice Shield

MID BEACON PLATE 4.3’ SHORT BASE

/ ICE SHIELD 45GSRSB
APL1258UM FOR EMBEDMENT IN CONCRETE.

Refer to pages 63-65 for the following accessories that also fit the 45GSR tower:

• Pier Pin (3/4x12PP) • Anti-Climb Panels (VW913A)

• Side Arm Bracket (SA253UA) • Work Platform (WP45G)
• Dish Mount (VY4311A2 & VY4311A) • Safety Ring (SR245)
• Face Mount (DM45G2 & DM454) • Climbing Harness (TTFBH-4D & TTFBH-C/P)
• Universal House Bracket (HBUTVRO) • Safety Cable Slider (TT-WG-500-W/SMC)
• Torque Bar (TB45D) • Safety Cable System (See page 65 for P/N)
• Guy Bracket (GA45GD)

* TOWERS MOUNTED ON THESE BASES MUST BE BRACKETED OR GUYED AT ALL TIMES. TEMPORARY STEEL GUYING MAY ALSO BE NECESSARY DURING INSTALLATION AND DISMANTLING.

92 Phone (309) 566-3000 • Fax (309) 566-3079 • www.rohnnet.com • The Industry Standard
© 2011 ROHN PRODUCTS LLC
 GUYED TOWERS - 45GSR G
A N C H O R I N F O R M AT I O N
81”

12”
3/8”
CL of hole to edge
of plate = 1” P/N STAMPED HERE 3/4”
4” x 4” x 3/8” angle
2”

11/16” GAC3455TOP

120”

12”
1/2”
CL of hole to edge
of plate = 1 1/4”
P/N STAMPED HERE 1 1/4”
5” x 5” x 3/8” angle
2 1/2”
13/16” GAC5655TOP

168”

12”
3/4”
CL of hole to edge
of plate = 1 1/4”
P/N STAMPED HERE 1 7/16”
5” x 5” x 3/8” angle
3”
15/16”
GAC5755TOP

REV G REV G
ANCHOR GROUNDING BASE GROUNDING
AGK1GGX BGK3GGX

Attach to leg with

supplied leg clamp

Ground Wire
Clamp
Ground Wire

Ground Rod Clamp

6” Min.
Ground Rod

Ground Rod Clamp 6” Min.

Ground Rod,
3 provided (to be installed
o
at 120 separation at 20’ spacing.

Phone (309) 566-3000 • Fax (309) 566-3079 • www.rohnnet.com • The Industry Standard
93
© 2011 ROHN PRODUCTS LLC
G GUYED TOWERS - 45GSR

S TA N D A R D A N C H O R B LO C K S

Anchor rod
Ground Line

All around stirrups

equally spaced 12”
o
O.C. anchored with 90 A
hooks around a
horizontal bar
Additional bar at B
center-line each
side, when required
Top and bottom C D
horizontal bars
equally spaced

Refer to pages 95-96 for anchor rod installation angles.

Anchor Dimensions (in.) Horizontal Bars Stirrup Size Concrete Vol.

Block & Spacing (Cu. Yds.)
A B C D (Qty. & Size)
(5) #6 Bars, Top Layer
AB2 4’ - 0” 1‘ - 6” 4‘ - 0“ 6’ - 0” (5) #6 Bars, Bottom Layer #3 @ 12” O.C. 1.33 Per Block
(0) Additional Bar, Each Side 4.0 Total for 3
(4) #6 Bars, Top Layer
AB3 6’ - 0” 1’ - 6” 3’ - 0” 6’ - 0” (4) #6 Bars, Bottom Layer #3 @ 12” O.C. 1.0 Per Block
(0) Additional Bar, Each Side 3.0 Total for 3
(5) #6 Bars, Top Layer
AB4 6‘ - 0” 1’ - 6” 4‘ - 0“ 9’ - 0” (5) #6 Bars, Bottom Layer #4 @ 12” O.C. 2.0 Per Block
(0) Additional Bar, Each Side 6.0 Total for 3
(4) #7 Bars, Top Layer
AB5 8’ - 0” 2’ - 0” 3’ - 0” 10’ - 0” (4) #7 Bars, Bottom Layer #4 @ 12” O.C. 2.22 Per Block
(1) Additional Bar, Each Side 6.7 Total for 3
(5) #7 Bars, Top Layer
AB6 8’ - 0” 2’ - 0” 4’ - 0” 10’ - 0” (5) #7 Bars, Bottom Layer #4 @ 12” O.C. 2.96 Per Block
8.9 Total for 3
(1) Additional Bar, Each Side

94 Phone (309) 566-3000 • Fax (309) 566-3079 • www.rohnnet.com • The Industry Standard
© 2011 ROHN PRODUCTS LLC
 GUYED TOWERS - 45GSR G
A N C H O R R O D I N S TA L L AT I O N A N G L E S

o Rod Angle
120 (in degrees) Ground Line

Tower Plan Anchor Rod Angle

45GSR | 90MPH 45GSR | 110MPH

Tower Inner Rod Inner Outer Rod Outer Tower Inner Rod Inner Outer Rod Outer
Rod Rod Rod Rod
Height Number Angle Number Angle Height Number Angle Number Angle
40’ GAC3455TOP 48 - - 40’ GAC3455TOP 48 - -
50’ GAC3455TOP 49 - - 50’ GAC3455TOP 49 - -
60’ GAC3455TOP 49 - - 60’ GAC3455TOP 49 - -
70’ GAC3455TOP 44 - - 70’ GAC3455TOP 43 - -
80’ GAC3455TOP 43 - - 80’ GAC3455TOP 42 - -
90’ GAC3455TOP 44 - - 90’ GAC3455TOP 43 - -
100’ GAC3455TOP 44 - - 100’ GAC3455TOP 44 - -
110’ GAC3455TOP 42 - - 110’ GAC3455TOP 41 - -
120’ GAC3455TOP 42 - - 120’ GAC3455TOP 41 - -
130’ GAC3455TOP 42 - - 130’ GAC3455TOP 41 - -
140’ GAC3455TOP 42 - - 140’ GAC3455TOP 42 - -
150’ GAC3455TOP 40 - - 150’ GAC5655TOP 40 - -
160’ GAC3455TOP 40 - - 160’ GAC5655TOP 40 - -
170’ GAC5655TOP 40 - - 170’ GAC5655TOP 40 - -
180’ GAC5655TOP 41 - - 180’ GAC5655TOP 40 - -
190’ GAC5655TOP 40 - - 190’ GAC5655TOP 40 - -
200’ GAC5655TOP 40 - - 200’ GAC5655TOP 40 - -
220’ GAC5655TOP 40 - - 220’ GAC5655TOP 40 - -
240’ GAC3455TOP 38 GAC3455TOP 46 240’ GAC3455TOP 39 GAC5655TOP 45
260’ GAC3455TOP 40 GAC3455TOP 46 260’ GAC3455TOP 40 GAC5655TOP 45
280’ GAC3455TOP 38 GAC5655TOP 44 280’ GAC3455TOP 39 GAC5655TOP 43
300’ GAC3455TOP 40 GAC5655TOP 44 300’ GAC3455TOP 40 GAC5655TOP 44
320’ GAC3455TOP 37 GAC5655TOP 45 320’ GAC5655TOP 40 GAC5655TOP 44
340’ GAC3455TOP 38 GAC5655TOP 45 340’ GAC5655TOP 40 GAC5655TOP 44

See the following page for 45GSR | 130mph anchor rod slopes.

Phone (309) 566-3000 • Fax (309) 566-3079 • www.rohnnet.com • The Industry Standard
95
© 2011 ROHN PRODUCTS LLC
G GUYED TOWERS - 45GSR

A N C H O R R O D I N S TA L L AT I O N A N G L E S

o Rod Angle
120 (in degrees) Ground Line

Tower Plan Anchor Rod Angle

45GSR | 130MPH
Tower Inner Rod Inner Outer Rod Outer
Rod Rod
Height Number Angle Number Angle
40’ GAC3455TOP 48 - -
50’ GAC3455TOP 48 - -
60’ GAC3455TOP 45 - -
70’ GAC3455TOP 42 - -
80’ GAC3455TOP 42 - -
90’ GAC3455TOP 43 - -
100’ GAC3455TOP 43 - -
110’ GAC5655TOP 40 - -
120’ GAC5655TOP 40 - -
130’ GAC5655TOP 41 - -
140’ GAC5655TOP 41 - -
150’ GAC5755TOP 39 - -
160’ GAC5755TOP 38 - -
170’ GAC5755TOP 39 - -
180’ GAC5755TOP 39 - -
190’ GAC5755TOP 37 - -
200’ GAC5755TOP 38 - -
220’ GAC5755TOP 38 - -
240’ GAC5655TOP 40 GAC5655TOP 45
260’ GAC5655TOP 41 GAC5655TOP 45
280’ GAC5755TOP 38 GAC5755TOP 42
300’ GAC5755TOP 39 GAC5755TOP 43
320’ GAC5755TOP 37 GAC5655TOP 43
340’ GAC5755TOP 38 GAC5655TOP 43

96 Phone (309) 566-3000 • Fax (309) 566-3079 • www.rohnnet.com • The Industry Standard
© 2011 ROHN PRODUCTS LLC
 GUYED TOWERS - 45GSR G
S TA N D A R D M AT F O U N D AT I O N
FOR 45GSR TOWERS

45GSR Tower Section

or Short Base Section,
placed with center of
2” min. projection above tower at center of
the finished concrete foundation

6”
Grade

4’ 0”

0” to 3”
W
(Square) No. 7 Bars 12” O.C., each
way, top and bottom

Base Mat Width Concrete Vol.

(W) (Cu. Yds.)
FB1G 4’ - 6” 3.0

FB2G 5‘-3“ 4.1

FB3G 6’-3” 5.8

Phone (309) 566-3000 • Fax (309) 566-3079 • www.rohnnet.com • The Industry Standard
97
© 2011 ROHN PRODUCTS LLC
G GUYED TOWERS - 45GSR

S TA N D A R D M E T E O R O LO G I C A L T O W E R S

Complete Kit Includes:

- Assembly and foundation
drawings
- All necessary tower sections
100 m
- Tower short base
- All guy wire and connectors
- All guy anchors
- Base and anchor grounding kits 318’
80 m
268’

60 m 250’

218’

198’
190’
331’
158’
148‘ 148’
262’

197’ 98’ 98’ 98’

48’ 48’ 48’

60MMET 80MMET 100MMET

4 Guy Elevations 5 Guy Elevations 6 Guy Elevations
1 Fixed Base Foundation 1 Fixed Base Foundation 1 Fixed Base Foundation
1 Anchor Radius 1 Anchor Radius 2 Anchor Radii

Boom EPA / WT. EPA / WT. Boom EPA / WT. EPA / WT. Boom EPA / WT. EPA / WT.
Height (no ice) (3/4”radial ice) Height (no ice) (3/4”radial ice) Height (no ice) (3/4”radial ice)
40 m 9.00 sq. ft. / 200 lbs. 25.00 sq. ft. / 600 lbs. 60 m 9.00 sq. ft. / 200 lbs. 25.00 sq. ft. / 600 lbs. 50 m 9.00 sq. ft. / 200 lbs. 25.00 sq. ft. / 600 lbs.
50 m 9.00 sq. ft. / 200 lbs. 25.00 sq. ft. / 600 lbs. 70 m 9.00 sq. ft. / 200 lbs. 25.00 sq. ft. / 600 lbs. 75 m 9.00 sq. ft. / 200 lbs. 25.00 sq. ft. / 600 lbs.
60 m 9.00 sq. ft. / 200 lbs. 25.00 sq. ft. / 600 lbs. 80 m 9.00 sq. ft. / 200 lbs. 25.00 sq. ft. / 600 lbs. 100 m 9.00 sq. ft. / 200 lbs. 25.00 sq. ft. / 600 lbs.

ANSI/TIA-222-G ANSI/TIA-222-G ANSI/TIA-222-G

110 MPH - 3 Second Gust (No Ice) 110 MPH - 3 Second Gust (No Ice) 110 MPH - 3 Second Gust (No Ice)
50 MPH - 3 Second Gust (3/4” Radial Ice) 50 MPH - 3 Second Gust (3/4” Radial Ice) 50 MPH - 3 Second Gust (3/4” Radial Ice)
Structure Class II Structure Class II Structure Class II
Exposure Category C Exposure Category C Exposure Category C
Topographic Category I Topographic Category I Topographic Category I

Tower design assumes (1) elevator track over height of structure.

98 Phone (309) 566-3000 • Fax (309) 566-3079 • www.rohnnet.com • The Industry Standard
© 2011 ROHN PRODUCTS LLC
 GUYED TOWERS - 45GSR G
S TA N D A R D 4 5 G S R
METEOROLOGICAL TOWER

9 21/32”
14 1/2”
Tower Guy Radius (ft.) Base Anchor
Height 120 o
separation Foundation Foundation
(m) No. No.
60 156 FB2G AB4
16 3/4”
80 210 FB3G AB5

100 106 / 264 FB3G AB2 / AB6

Refer to page 288 for anchor rod details.

FOR FOUNDATION INFORMATION, PLEASE SEE
PAGES 94 & 97. FOR GENERAL INSTALLATION
INFORMATION, PLEASE SEE PAGES 147-153.

Optional Waveguide
Brackets (KY2041A)

1 1/4” O.D.
Solid Round

7/16” or 5/8” O.D.

Solid Bracing

1 1/4” O.D.
Solid Round
Double braced
sections provided
where required. 7/16” O.D.
Solid Bracing

4.3’ 45GSR SHORT BASE

45GSRSB
TO BE EMBEDDED IN CONCRETE.

STANDARD SECTION
45GSR10 - 10’ Section
45GSR20 - 20’ Section

Phone (309) 566-3000 • Fax (309) 566-3079 • www.rohnnet.com • The Industry Standard
99
© 2011 ROHN PRODUCTS LLC