Saturday, September 2, 2023 1:27 PM

PAGE NO. 1

****************************************************
* *
* STAAD.Pro CONNECT Edition *
* Version 22.09.00.115 *
* Proprietary Program of *
* Bentley Systems, Inc. *
* Date= SEP 2, 2023 *
* Time= 18:38:58 *
* *
* Licensed to: only@ ::LAVteam::® *
****************************************************

1. STAAD SPACE
INPUT FILE: C:\Users\wowmo\OneDrive\Desktop\LGU - Files\LGU - MEO Files-JGB-JGB\Bong Delizo\Design Ana.. .STD
2. START JOB INFORMATION
3. JOB NAME PROPOSED 2 STOREY COMMERCIAL BLDG.
4. JOB CLIENT MR. BL
5. JOB NO 001
6. ENGINEER NAME ENGR.JGB
7. ENGINEER DATE 9/9/2023
8. END JOB INFORMATION
9. INPUT WIDTH 79
10. UNIT METER KN
11. JOINT COORDINATES
12. 1 0 1.5 0; 2 4.8 1.5 0; 3 9.6 1.5 0; 4 14.4 1.5 0; 5 19.2 1.5 0; 6 24 1.5 0
13. 7 28.8 1.5 0; 8 0 1.5 7.3; 9 4.8 1.5 7.3; 10 9.6 1.5 7.3; 11 14.4 1.5 7.3
14. 12 19.2 1.5 7.3; 13 24 1.5 7.3; 14 28.8 1.5 7.3; 15 0 0 0; 16 4.8 0 0
15. 17 9.6 0 0; 18 14.4 0 0; 19 19.2 0 0; 20 24 0 0; 21 28.8 0 0; 22 0 0 7.3
16. 23 4.8 0 7.3; 24 9.6 0 7.3; 25 14.4 0 7.3; 26 19.2 0 7.3; 27 24 0 7.3
17. 28 28.8 0 7.3; 29 0 6 0; 30 4.8 6 0; 31 9.6 6 0; 32 14.4 6 0; 33 19.2 6 0
18. 34 24 6 0; 35 28.8 6 0; 36 0 6 7.3; 37 4.8 6 7.3; 38 9.6 6 7.3; 39 14.4 6 7.3
19. 40 19.2 6 7.3; 41 24 6 7.3; 42 28.8 6 7.3; 43 0 9 0; 44 4.8 9 0; 45 9.6 9 0
20. 46 14.4 9 0; 47 19.2 9 0; 48 24 9 0; 49 28.8 9 0; 50 0 9 7.3; 51 4.8 9 7.3
21. 52 9.6 9 7.3; 53 14.4 9 7.3; 54 19.2 9 7.3; 55 24 9 7.3; 56 28.8 9 7.3
22. 57 -1 6 0; 58 -1 6 7.3; 59 -1 9 0; 60 -1 9 7.3; 61 0 1.5 5.5; 62 4.8 1.5 5.5
23. 63 0 6 5.5; 64 4.8 6 5.5; 65 0 9 5.5; 66 4.8 9 5.5; 67 -1 6 3.65; 68 0 6 3.65
24. 69 4.8 6 3.65; 70 9.6 6 3.65; 71 14.4 6 3.65; 72 19.2 6 3.65; 73 24 6 3.65
25. 74 28.8 6 3.65; 75 -1 9 3.65; 76 0 9 3.65; 77 4.8 9 3.65; 78 9.6 9 3.65
26. 79 14.4 9 3.65; 80 19.2 9 3.65; 81 24 9 3.65; 82 28.8 9 3.65
27. MEMBER INCIDENCES
28. 1 1 2; 2 2 3; 3 3 4; 4 4 5; 5 5 6; 6 6 7; 7 8 9; 8 9 10; 9 10 11; 10 11 12
29. 11 12 13; 12 13 14; 13 1 61; 14 2 62; 15 3 10; 16 4 11; 17 5 12; 18 6 13
30. 19 7 14; 20 15 1; 21 22 8; 22 16 2; 23 23 9; 24 17 3; 25 24 10; 26 25 11
31. 27 18 4; 28 19 5; 29 26 12; 30 27 13; 31 20 6; 32 21 7; 33 28 14; 34 1 29
32. 35 2 30; 36 3 31; 37 4 32; 38 5 33; 39 6 34; 40 7 35; 41 8 36; 42 9 37
33. 43 10 38; 44 11 39; 45 12 40; 46 13 41; 47 14 42; 48 29 30; 49 30 31; 50 31 32
34. 51 32 33; 52 33 34; 53 34 35; 54 36 37; 55 37 38; 56 38 39; 57 39 40; 58 40 41
35. 59 41 42; 60 29 68; 61 30 69; 62 31 70; 63 32 71; 64 33 72; 65 34 73; 66 35 74
36. 67 29 43; 68 30 44; 69 31 45; 70 32 46; 71 33 47; 72 34 48; 73 35 49; 74 36 50
37. 75 37 51; 76 38 52; 77 39 53; 78 40 54; 79 41 55; 80 42 56; 81 43 44; 82 44 45
38. 83 45 46; 84 46 47; 85 47 48; 86 48 49; 87 50 51; 88 51 52; 89 52 53; 90 53 54

C:\Users\wowmo\OneDrive\Desktop\LGU - Files\LGU - MEO Files-JGB-JGB\Bong Delizo\Design Analysis\Structure1.anlPage 1 of 9

 Saturday, September 2, 2023 1:27 PM

STAAD SPACE -- PAGE NO. 2

39. 91 54 55; 92 55 56; 93 43 76; 94 44 77; 95 45 78; 96 46 79; 97 47 80; 98 48 81

40. 99 49 82; 100 29 57; 101 36 58; 102 50 60; 103 43 59; 104 59 75; 105 57 67
41. 106 61 8; 107 62 9; 108 61 62; 109 63 36; 110 64 37; 111 63 64; 112 65 50
42. 113 66 51; 114 65 66; 115 67 58; 116 68 63; 117 67 68; 118 69 64; 119 68 69
43. 120 70 38; 121 69 70; 122 71 39; 123 70 71; 124 72 40; 125 71 72; 126 73 41
44. 127 72 73; 128 74 42; 129 73 74; 130 75 60; 131 76 65; 132 75 76; 133 77 66
45. 134 76 77; 135 78 52; 136 77 78; 137 79 53; 138 78 79; 139 80 54; 140 79 80
46. 141 81 55; 142 80 81; 143 82 56; 144 81 82
47. START GROUP DEFINITION
48. GEOMETRY
49. FLOOR
50. _2F_1WAY 54 60 100 101 105 109 TO 111 115 TO 119
51. _RF_2WAY 81 TO 86 88 TO 99 113 133 TO 144
52. _RF_1WAY 87 93 102 TO 104 112 TO 114 130 131 133 134
53. _2F_WAY 48 TO 53 55 TO 66 110 118 TO 129
54. END GROUP DEFINITION
55. DEFINE MATERIAL START
56. ISOTROPIC CONCRETE
57. E 2.17185E+07
58. POISSON 0.17
59. DENSITY 23.5616
60. ALPHA 1E-05
61. DAMP 0.05
62. G 9.28139E+06
63. TYPE CONCRETE
64. STRENGTH FCU 27579
65. ISOTROPIC CONCRETE_20MPA
66. E 2.1019E+07
67. POISSON 0.17
68. DENSITY 24
69. ALPHA 1E-05
70. DAMP 0.05
71. G 9.28139E+06
72. TYPE CONCRETE
73. STRENGTH FCU 20000
74. END DEFINE MATERIAL
75. MEMBER PROPERTY
76. 1 TO 19 48 TO 66 81 TO 107 109 110 112 113 115 116 118 120 122 124 126 128 -
77. 130 131 133 135 137 139 141 143 PRIS YD 0.30 ZD 0.4
78. 108 111 114 117 119 121 123 125 127 129 132 134 136 138 140 142 -
79. 144 PRIS YD 0.30 ZD 0.4
80. 20 TO 47 67 TO 80 PRIS YD 0.6 ZD 0.30
81. CONSTANTS
82. BETA 90 MEMB 1 TO 19 48 TO 66 81 TO 144
83. MATERIAL CONCRETE ALL
84. MEMBER RELEASE
85. 108 111 114 117 119 121 123 125 127 129 132 134 136 138 140 142 144 START MY MZ
86. 108 111 114 117 119 121 123 125 127 129 132 134 136 138 140 142 144 END MY MZ
87. MEMBER CRACKED
88. 1 TO 19 48 TO 66 81 TO 144 REDUCTION RIY 0.35 RIZ 0.35
89. 20 TO 47 67 TO 80 REDUCTION RIY 0.7 RIZ 0.7
90. SUPPORTS
91. 15 TO 28 FIXED
92. DEFINE REFERENCE LOADS
93. LOAD R1 LOADTYPE DEAD TITLE DL
94. SELFWEIGHT Y -1

C:\Users\wowmo\OneDrive\Desktop\LGU - Files\LGU - MEO Files-JGB-JGB\Bong Delizo\Design Analysis\Structure1.anlPage 2 of 9

 Saturday, September 2, 2023 1:27 PM

STAAD SPACE -- PAGE NO. 3

95. ONEWAY LOAD

96. _2F_1WAY ONE -5.18 GY
97. FLOOR LOAD
98. _2F_WAY FLOAD -5.18 GY
99. _RF_2WAY FLOAD -4.51 GY
100. ONEWAY LOAD
101. _RF_1WAY ONE -4.51 GY
102. MEMBER LOAD
103. 1 TO 13 19 48 TO 59 66 100 101 105 106 115 128 UNI GY -8.91
104. 81 TO 92 99 102 TO 104 130 143 UNI GY -3.17
105. END DEFINE REFERENCE LOADS

*** NOTE: NEITHER "MASS" NOR "GRAVITY" REFERENCE LOADTYPE IS PRESENT.

MASS MODEL IS FORMED BY COMBINING ALL "DEAD" AND "LIVE" (IF ANY) REFERENCE LOADTYPES.

*** NOTE: MASS MODEL FORMED WILL BE USED IN SEISMIC/RESPONSE/TIME HISTORY LOADING, IF ANY.
IF MASS MODEL IS SEPARATELY PROVIDED IN INDIVIDUAL LOADING, THE GENERATED MASS
WILL BE REPLACED BY THE MASS PROVIDED IN INDIVIDUAL LOADING.

106. FLOOR DIAPHRAGM

107. DIA 1 TYPE RIG HEI 1.5
108. DIA 2 TYPE RIG HEI 6
109. DIA 3 TYPE RIG HEI 9
110. CHECK SOFT STORY ASCE7

FLOOR DIAPHRAGM

************************************************************************************

FLOOR DIAPHRAGM UNIT - KN METE

--------------- ----------------

NO. TYPE FL. LEVEL FL. WT CENTRE OF MASS CONTROL JOINT NO.
X Z

1 RIGID 1.500 1142.34 14.257 3.672 83

2 RIGID 6.000 2442.10 13.785 3.660 84
3 RIGID 9.000 1736.84 13.700 3.664 85

************************************************************************************

112. DEFINE UBC LOAD

113. ZONE 0.4 I 1 RWX 8.5 RWZ 8.5 STYP 4 CT 0.0731 NA 1 NV 1
114. REFERENCE LOAD Y

*** NOTE: SEISMIC WEIGHT TABLE IS PRESENT.THIS WEIGHT TABLE

WILL BE CONSIDERED IN STATIC SEISMIC ANALYSIS.

115. R1 1.0
116. LOAD 1 LOADTYPE SEISMIC-H TITLE EQX
117. REFERENCE LOAD

C:\Users\wowmo\OneDrive\Desktop\LGU - Files\LGU - MEO Files-JGB-JGB\Bong Delizo\Design Analysis\Structure1.anlPage 3 of 9

 Saturday, September 2, 2023 1:27 PM

STAAD SPACE -- PAGE NO. 4

118. R1 1.0
119. PERFORM ANALYSIS

P R O B L E M S T A T I S T I C S
-----------------------------------

NUMBER OF JOINTS 85 NUMBER OF MEMBERS 144

NUMBER OF PLATES 0 NUMBER OF SOLIDS 0
NUMBER OF SURFACES 0 NUMBER OF SUPPORTS 14

Using 64-bit analysis engine.

SOLVER USED IS THE IN-CORE ADVANCED MATH SOLVER

TOTAL PRIMARY LOAD CASES = 1, TOTAL DEGREES OF FREEDOM = 222

TOTAL LOAD COMBINATION CASES = 0 SO FAR.

SOFT STORY CHECK

VERTICAL STRUCTURAL IRREGULARITIES : SOFT STORY CHECK - ASCE/SEI 7-05

-------- ---------- --------------

STORY FL. LEVEL IN METE S T A T U S

----- ----------------- --------------------
X Z

1 1.50 OK OK
2 6.00 OK OK
3 9.00 OK OK

NOTE : NO SOFT STOREY IS DETECTED.

120. CHANGE
121. LOAD 2 LOADTYPE SEISMIC-V TITLE EQZ
122. REFERENCE LOAD
123. R1 1.0
124. PERFORM ANALYSIS

125. CHANGE
126. LOAD 3 LOADTYPE DEAD TITLE DL
127. REFERENCE LOAD

C:\Users\wowmo\OneDrive\Desktop\LGU - Files\LGU - MEO Files-JGB-JGB\Bong Delizo\Design Analysis\Structure1.anlPage 4 of 9

 Saturday, September 2, 2023 1:27 PM

STAAD SPACE -- PAGE NO. 5

128. R1 1.0
129. LOAD 4 LOADTYPE LIVE TITLE LL
130. ONEWAY LOAD
131. _2F_1WAY ONE -1.9 GY
**NOTE** about Floor/OneWay Loads/Weights.
Please note that depending on the shape of the floor you may
have to break up the FLOOR/ONEWAY LOAD into multiple commands.
For details please refer to Technical Reference Manual
Section 5.32.4.2 Note d and/or "5.32.4.3 Note f.

132. FLOOR LOAD

133. _2F_WAY FLOAD -1.9 GY
**NOTE** about FLOOR GROUP command
All floor panels in a floor group should lie in a single plane.
If not lying in a single plane break single FLOOR GROUP
command into multiple FLOOR GROUP commands where each
floor group lie in a single plane / height.

134. ONEWAY LOAD

135. _RF_1WAY ONE -1.9 GY
136. FLOOR LOAD
137. _RF_2WAY FLOAD -1.9 GY
138. LOAD COMB 5 COMB - 1.2 DEAD + 0.5 LIVE + 1 SEISMIC-H (1)
139. 3 1.2 4 0.5 1 1.0
140. LOAD COMB 6 COMB - 1.2 DEAD + 0.5 LIVE + 1 SEISMIC-H (2)
141. 3 1.2 4 0.5 2 1.0
142. LOAD COMB 7 COMB - 1.2 DEAD + 0.5 LIVE + -1 SEISMIC-H (1)
143. 3 1.2 4 0.5 1 -1.0
144. LOAD COMB 8 COMB - 1.2 DEAD + 0.5 LIVE + -1 SEISMIC-H (2)
145. 3 1.2 4 0.5 2 -1.0
146. LOAD COMB 10 COMB - 0.9 LIVE + 1 SEISMIC-H (1)
147. 4 0.9 1 1.0
148. LOAD COMB 11 COMB - 0.9 LIVE + 1 SEISMIC-H (2)
149. 4 0.9 2 1.0
150. LOAD COMB 12 COMB - 0.9 LIVE + -1 SEISMIC-H (1)
151. 4 0.9 1 -1.0
152. LOAD COMB 13 COMB - 0.9 LIVE + -1 SEISMIC-H (2)
153. 4 0.9 2 -1.0
154. LOAD COMB 15 COMB - 1 DEAD + 1 LIVE
155. 3 1.0 4 1.0
156. PERFORM ANALYSIS

C:\Users\wowmo\OneDrive\Desktop\LGU - Files\LGU - MEO Files-JGB-JGB\Bong Delizo\Design Analysis\Structure1.anlPage 5 of 9

 Saturday, September 2, 2023 1:27 PM

STAAD SPACE -- PAGE NO. 6

157. LOAD LIST 5 TO 8 10 TO 13 15

158. PRINT STORY DRIFT 0.004200
STORY DRIFT 0.004200

C:\Users\wowmo\OneDrive\Desktop\LGU - Files\LGU - MEO Files-JGB-JGB\Bong Delizo\Design Analysis\Structure1.anlPage 6 of 9

 Saturday, September 2, 2023 1:27 PM

STAAD SPACE -- PAGE NO. 7

STORY HEIGHT LOAD AVG. DISP(CM ) DRIFT(CM ) RATIO STATUS

------------------------------------------------------------------------------------------
(METE) X Z X Z

BASE= 0.00 ALLOW. DRIFT = L / 238

1 0.00 5 0.0000 0.0000 0.0000 0.0000 L /999999 PASS

6 0.0000 0.0000 0.0000 0.0000 L /999999 PASS
7 0.0000 0.0000 0.0000 0.0000 L /999999 PASS
8 0.0000 0.0000 0.0000 0.0000 L /999999 PASS
10 0.0000 0.0000 0.0000 0.0000 L /999999 PASS
11 0.0000 0.0000 0.0000 0.0000 L /999999 PASS
12 0.0000 0.0000 0.0000 0.0000 L /999999 PASS
13 0.0000 0.0000 0.0000 0.0000 L /999999 PASS
15 0.0000 0.0000 0.0000 0.0000 L /999999 PASS

2 1.50 5 -0.0067 -0.0068 0.0067 0.0068 L / 22166 PASS

6 -0.0067 -0.0068 0.0067 0.0068 L / 22166 PASS
7 -0.0007 -0.0007 0.0007 0.0007 L /999999 PASS
8 -0.0007 -0.0007 0.0007 0.0007 L /999999 PASS
10 -0.0032 -0.0032 0.0032 0.0032 L / 46309 PASS
11 -0.0032 -0.0032 0.0032 0.0032 L / 46309 PASS
12 0.0028 0.0028 0.0028 0.0028 L / 53507 PASS
13 0.0028 0.0028 0.0028 0.0028 L / 53507 PASS

C:\Users\wowmo\OneDrive\Desktop\LGU - Files\LGU - MEO Files-JGB-JGB\Bong Delizo\Design Analysis\Structure1.anlPage 7 of 9

 Saturday, September 2, 2023 1:27 PM

STAAD SPACE -- PAGE NO. 8

15 -0.0032 -0.0033 0.0032 0.0033 L / 45964 PASS

3 6.00 5 -0.1363 -0.0826 0.1296 0.0759 L / 3472 PASS

6 -0.1363 -0.0826 0.1296 0.0759 L / 3472 PASS
7 -0.0144 -0.0101 0.0137 0.0094 L / 32915 PASS
8 -0.0144 -0.0101 0.0137 0.0094 L / 32915 PASS
10 -0.0649 -0.0414 0.0617 0.0381 L / 7292 PASS
11 -0.0649 -0.0414 0.0617 0.0381 L / 7292 PASS
12 0.0570 0.0312 0.0542 0.0284 L / 8298 PASS
13 0.0570 0.0312 0.0542 0.0284 L / 8298 PASS
15 -0.0653 -0.0419 0.0621 0.0387 L / 7243 PASS

4 9.00 5 -0.2809 -0.1590 0.1446 0.0763 L / 2074 PASS

6 -0.2809 -0.1590 0.1446 0.0763 L / 2074 PASS
7 -0.0299 -0.0201 0.0155 0.0100 L / 19354 PASS
8 -0.0299 -0.0201 0.0155 0.0100 L / 19354 PASS
10 -0.1341 -0.0806 0.0692 0.0392 L / 4334 PASS
11 -0.1341 -0.0806 0.0692 0.0392 L / 4334 PASS
12 0.1169 0.0583 0.0599 0.0271 L / 5008 PASS
13 0.1169 0.0583 0.0599 0.0271 L / 5008 PASS
15 -0.1351 -0.0818 0.0697 0.0399 L / 4302 PASS
159. PRINT DIA CR
DIA CR

************************************************************

CENTRE OF RIGIDITY UNIT - METE

------------------ -----------

DIAPHRAM FL. LEVEL X-COORDINATE Z-COORDINATE

1 1.500 14.385 3.650

2 6.000 14.126 3.650
3 9.000 13.819 3.650

************************************************************

C:\Users\wowmo\OneDrive\Desktop\LGU - Files\LGU - MEO Files-JGB-JGB\Bong Delizo\Design Analysis\Structure1.anlPage 8 of 9

 Saturday, September 2, 2023 1:27 PM

STAAD SPACE -- PAGE NO. 9

160. FINISH

*********** END OF THE STAAD.Pro RUN ***********

**** DATE= SEP 2,2023 TIME= 18:39: 0 ****

************************************************************
* For technical assistance on STAAD.Pro, please visit *
* http://www.bentley.com/en/support/ *
* *
* Details about additional assistance from *
* Bentley and Partners can be found at program menu *
* Help->Technical Support *
* *
* Copyright (c) Bentley Systems, Inc. *
* http://www.bentley.com *
************************************************************

C:\Users\wowmo\OneDrive\Desktop\LGU - Files\LGU - MEO Files-JGB-JGB\Bong Delizo\Design Analysis\Structure1.anlPage 9 of 9