www.queclink.com sales@queclink.

com +86 21 5108 2965

Mini Size

Easy Installation

Internal Battery

OTA Control

Scheduled Timing Report

Geo-fences

Crash Detection

GV55 Series Driving Behavior Monitoring

Cost effective mini telematics devices for vehicle Tow Alarm

security and light duty applications
Ignition Detection

136g S 63mm(L) × 50mm(W) × 21.8mm(H)

Jamming Detection
-30℃ ~ +80℃ (GV55) Operating Voltage: 8V to 32V DC
-30℃ ~ +70℃ (GV55W) Li-Polymer, 250 mAh

The GV55 series includes two mini telematics devices that allow easy instllation for customers. The series offers ideal and cost
effective solutions for vehicle security, car leasing and light duty applications.

Stolen Vehicle Recovery Car Leasing Fleet Management

Driving Smarter IoT

 Queclink Wireless Solutions Co., Ltd.

GV55 Series Models

Position Accuracy
Region Operating Band GNSS Type Certificate
(CEP)

u-blox All-in-One CE/FCC/

GV55 Worldwide GSM 850/900/1800/1900 MHz Autonomous: < 2.5m
GPS receiver E-mark

UMTS 850/1900/2100 MHz u-blox All-in-One

GV55W Worldwide Autonomous: < 2.5m
GSM 850/900/1800/1900 MHz GPS receiver

Interfaces

Mini USB Interface

GSM LED / GPS LED / Power LED

Power ON / OFF 6 PIN Interface

1 positive trigger input for ignition detection

Digital Inputs
1 negative trigger input for normal use

Digital Output 1 digital output, open drain, 150 mA max drive current

Latched Digital Output 1 digital output with internal latch circuit, open drain, 150 mA max drive current

Cellular Antenna Internal only

GPS Antenna Internal only

LED Indicators GSM, GPS, PWR

Mini USB Interface Used for upgrading and debugging

www.queclink.com [email protected] +86 21 5108 2965

 www.queclink.com [email protected] +86 21 5108 2965

A prueba de agua, estándar IP67

Múltiples entradas/salidas

Cero consumo de corriente

Configuración remota

Reporte de tiempo programable

Geo cercas

GV75W Detección de choque

Rastreador avanzado impermeable ideal para Monitoreo de hábitos de manejo

aplicaciones en motocicletas, vehiculos todoterreno,
motos acuáticas y maquinaria pesada.
Alerta de batería baja
(102 × 46 × 20.5mm)
122g (4.30oz) S 4.02’’(L) × 1.81’’(W) × 0.81’’(H)
Compatible con GARMIN FMI
Voltaje de operación:8V a 32V CD
-30℃ ~ +70℃
Polímero de Litio 1100 mAh
Compatible con sensor de temperatura
Tiempo de duración:
Sin Reportar 140 horas
Identificación de conductor
Reportes cada 5 minutos 70 horas
Reporte cada 10 minutos 80 horas

El GV75W está diseñado específicamente para su uso en motocicletas y aporta tranquilidad a los propietarios de motocicletas de todo el
mundo. Cuenta con el revolucionario sistema de cero consumo de Queclink, que permite a los usuarios dejar sus motocicletas sin uso durante
largos períodos de tiempo sin tener que preocuparse por el agotamiento de la batería. Nuestros clientes han encontrado muchas aplicaciones
en vehículos y flotas para este versátil producto. La carcasa impermeable y a prueba de polvo lo hace adecuado no sólo para motocicletas,
sino también para vehículos todoterreno, embarcaciones y maquinaria pesada.

Monitoreo de motocicletas Rastreo de embarcaciones Seguridad para vehículos

Driving Smart IoT

 Queclink Wireless Solutions Co., Ltd.

GV75W

Tipo de receptor Precisión de posición

Región Banda operativa Certificación
GNSS (CEP)

UMTS 850/1900/2100 MHz Receptor GNSS

Global Autónomo: < 2.5m CE/FCC
GSM 850/900/1800/1900 MHz u-blox All-in-One

Appearance

GNSS LED

11 PIN Interface

Interfaces

1 entrada digital positiva para la detección de ignición

Entradas digitales 1 entrada de activación negativa para uso común
(Compatible con TPM)

Salidas digitales 1 salida digital, colector/drenaje abierto, máxima corriente de salida 150 mA

1 salida digital con circuito de cierre interno, colector/drenaje abierto, máxima

Salidas digitales (Latched)
corriente de salida 150 mA

1 puerto serie RS232 utilizado para dispositivos externos (Compatible con el

Puerto serie
protocolo GARMIN)

Antena GSM Interna

Antena GPS Interna

Indicador LED CEL, GNSS, PWR

Puerto USB Para actualización y configuración

www.queclink.com [email protected] +86 21 5108 2965

 www.queclink.com [email protected] +86 21 5108 2965

Multiple I/O Interfaces

RS232 Serial Port

Two-way Audio Interfaces

OTA Control

Scheduled Timing Report

Geo-fences

Low Power Alarm

Power On Report

Antenna Disconnect Alarm

GV300 Series
Garmin FMI Support

Crash Detection (GV300)

Compact GNSS trackers with multiple interfaces
suitable for a wide range of vehicles Driving Behavior Monitoring

Tow Alarm

Fuel Level Monitoring

72g M 80mm(L) × 48mm(W) × 25mm(H)

-30℃ ~ +80℃ (GV300) Operating Voltage: 8V to 32V DC Support Temperature Sensor

-30℃ ~ +70℃ (GV300W) Li-Polymer, 250 mAh
Driver ID Identify

The GV300 series includes two models designed for light duty vehicle applications. The series features multiple interfaces
including one RS232 serial port, one smart input, a two-way audio interface, etc. to support a wide variety of external accessories.

Fleet Management Cold Chain Transportation Monitoring

Driving Smarter IoT

 Queclink Wireless Solutions Co., Ltd.

GV300 Series Models

Position Accuracy
Region Operating Band GNSS Type Certificate
(CEP)

u-blox All-in-One CE/FCC/E-Mark/

GV300 Worldwide GSM 850/900/1800/1900 MHz Autonomous: < 2.5m
GNSS receiver ANATEL

UMTS 850/1900/2100 MHz u-blox All-in-One

GV300W Worldwide Autonomous: < 2.5m CE/FCC/E-Mark
GSM 850/900/1800/1900 MHz GNSS receiver

Multiple Interfaces

GSM LED / GNSS LED / Power LED 16 PIN Interface

Battery Switch

Mini USB Interface GNSS Connector

1 positive trigger input for ignition detection

Digital Inputs
2 negative trigger inputs for normal use

Digital Outputs 2 digital outputs, open drain, 150 mA max drive current

Latched Digital Output 1 digital output with internal latch circuit, open drain, 150 mA max drive current

1 special input can be configured as a negative trigger digital input or an analog

Configurable Input
input (0V-16V)

Analog Input 1 analog input (0.3V-16V)

1 RS232 serial port on 16 pin molex type connector, for external devices
Serial Port
(GARMIN protocol support)

1 differential output
Two-way Audio Interfaces
1 single end input

Cellular Antenna Internal only

GNSS Antenna Internal antenna and optional external antenna

LED Indicators CEL, GNSS, PWR

Mini USB Interface Used for upgrading and debugging

www.queclink.com [email protected] +86 21 5108 2965

 www.queclink.com [email protected] +86 21 5108 2965

Ruggedized Case

BLE 4.2

IP67 Waterproof

Multiple I/O Interfaces

1-wire Interface

RS232 Port

OTA Control

GV600WG Scheduled Timing Report

R e c har g e ab l e wa t e r p r o o f t ra c k i n g d e v i c e Geo-fences

supporting BLE 4.2 with 120 days standby time

designed for trailer, tanker and flatbed truck Low Power Alarm
applications
138 × 66 × 38mm Power on Report
320g (11.29 oz) L
5.43’’(L) × 2.60’’(W) × 1.50’’(H)

-30℃ ~ +80℃ Li-ion, 3.7 V, 5800 mAh, Fuel Level Monitoring

18650 battery pack
Support Temperature Sensor

Standby Time: (15 Min per Day）

1 Report/Day 120 Days

The GV600WG is a UMTS/GSM product specifically designed for heavy duty vehicles including trailers, tanks, refrigerated and flatbed trucks.
Its ruggedized waterproof design ensures the product remains reliable when installed in the harsh environments commonly found in heavy
transportation such as fuel and chemical transportation. The GV600WG can operate for up to three months without external power, making it
ideal for tracking trailers even when disconnected. The wide range of pre-integrated wired and BLE wireless accessories provided either by
Queclink, or our carefully selected partners, allows users to apply it to various fleet industries.

Trailer Tracking Flatbed Truck Tracking Tanker Tracking

Driving Smarter IoT

 Queclink Wireless Solutions Co., Ltd.

GV600WG

Position Accuracy
Region Network/Operating Band GNSS Type
(CEP)

UMTS/HSPA: 800/850/900/1900/2100
Worldwide u-blox All-in-One GNSS receiver Autonomous: < 2.5m
MHz GSM: 850/900/1800/1900 MHz

Multiple Interfaces

18 PIN Interface Power LED / GPS LED / CEL LED

4 negative trigger inputs for normal use, or

Digital Inputs/Outputs
4 open drain outputs 150mA max drive current

Analog Input 1 analog input (0V -32V)

1-wire Interface Support 1-wire temperature sensor and ibutton driver ID

Power Output 1 power output (3.3V)

Serial Port 1 RS232 serial port

Cellular Antenna Internal only

GNSS Antenna Internal only

BLE Antenna Internal only

LED Indicators CEL, GNSS, PWR

Connector 18 pin waterproof connector

www.queclink.com [email protected] +86 21 5108 2965

 Rapid Installation

Emergency Button

Water Resistant

OTA Control

Scheduled Timing Report

GL300W Geo-fences

Water resistant tracker with a user friendly panic Motion Detection

button for personal safety management and asset
monitoring applications
Ignition Detection

93g S 39.9mm(L) × 26.7mm(W) × 77.9mm(H)

Vibration Feedback
-20℃ ~ +55℃ Li-Polymer, 2600 mAh

Low Power Alarm

Standby TimeStandby Time (GL300W):
Without Reporting 350~660 Hours
5 Min Reporting 90~320 Hours Use with Animal Collars
10 Min Reporting 120~410 Hours

The GL300W is a GNSS tracker that is designed for lone worker safety and asset monitoring applications. The ergonomically
designed button makes the device ideal for applications requiring rapid emergency alert or instant geo-fencing based on current
location. GL300W supports both 2G and 3G network for a wide application across the world.

Lone Worker Safety Asset Monitoring Stolen Vehicle Recovery

Driving Smarter IoT

GL300W

Position Accuracy
Region Operating Band GNSS Type Certificate
(CEP)
GSM 850/900/1800/1900 MHz u-blox All-in-One
Worldwide Autonomous: < 2.5m CE/FCC
UMTS 850/1900/2100 MHz GPS receiver

Appearance

GPS LED / Power LED / CEL LED

SIM Card Slot

Power Key

Function Button
Mini USB Interface

Interfaces

1 positive trigger input for ignition detection

Digital Inputs
1 negative trigger input for normal use
Power Button Power on and power off, can be disabled by the air interface protocol
Function Button
Emergency alert or instant geo-fence setting
With Vibration Feedback
Cellular Antenna Internal only
GPS Antenna Internal only
LED Indicators CEL, GPS, PWR
Mini USB Interface Used for external power and configuration

Air Interface Protocol

Transmit Protocol TCP, UDP, SMS

Report position and status based on preset time intervals, distance, mileage or a
Scheduled Report
combination of these settings
Geo-fences Support up to 5 internal geo-fence regions
Power On/Off Report Report when the device is powered on and off
Low Power Alarm Alarm when battery is low
SOS/Emergency Alarm SOS alarm via pressing function button
Special Alarm Special alarm based on digital inputs
Motion Detection Motion alarm based on internal 3-axis accelerometer
 www.queclink.com [email protected] +86 21 5108 2965

LTE Cat 4 with 3G and 2G Fallback

WiFi AP Mode & Station Mode

High Definition Dual-lens Camera

(Interior Camera with Night Vision)

FHD 158° FOV+ HD 149° FOV

Accident Footage Auto Upload

Video Quality Configurable

Parking Mode

Smart TF Card Storage Management

Customizable Voice Prompt

Over Speed Alarm

CV100LG Driving Behavior Monitoring

Auto Emergency Call

Telematics Dual-Lens LTE Cat 4 Dash Camera Up to 10 BLE Key Fobs

GNSS Positioning
270g (9.52oz) 127.77 x 53.93 x 106.69mm
S
5.03”(L) x 2.12”(W) x 4.20”(H) Ignition Detection
-20℃ ~ +70℃ Operating Voltage:8V to 32V DC,
-40℃ ~ +85℃ for storage Li-Polymer, 470mAh OTA Control

Mobile App for Live Preview&

Recording Time: Record Playback

12.8 hours: front 30fps+interior 15fps, 64GB TF card Power Management to

12.6 hours: front 24fps+interior 24fps, 64GB TF card Protect Vehicle Battery

Up to 10,000 Buffer Messages

The CV100LG is Queclink’s connected video telematics camera combining high-definition video capture with Queclink’s
advanced telematics features and WiFi Internet access. It is suitable for applications such as insurance claim negotiations,
driver training, driver distraction monitoring, passenger compartment monitoring and accident reporting. Fast upload of video
data is enabled through the use of global LTE technology. The CV100LG’s front and interior cameras capture both the driver and
the road ahead.

Automobile Insurance Car Leasing Ride Sharing & Ride Hailing Driver Coaching

Driving Smarter IoT

CV100LG
Position Accuracy
Region Operating Band GNSS Type
(CEP)

LTE Cat 4:
LTE-FDD: B2/B3/B4/B8/B12/B13
Worldwide LTE-TDD: B40 All-in-one GNSS Receiver Autonomous: < 2.5m
WCDMA: B2/B3/B8
GSM: 900/1800/1900 MHz

Appearance
Reset Button

Mount bracket with grooves for

sliding installation and removal
USB Type-C Slot

Microphone 4PIN Connector Interface

Multi-function Button
Infrared LED

Speaker
PWR LED
TF Card Slot SIM Card Slot GNSS LED CEL LED
Front Camera（fixed）
REC LED
Interior Camera
(vertical rotation adjustment)
Record Specifications

Image Sensor FHD CMOS + HD CMOS

Front 158°FOV (fixed)

Lens
Interior 149°FOV (vertical rotation adjustment)

Video Resolution 1080P@front camera / 720P@interior camera

30fps + 15fps
Video Frame Rate 24fps + 24fps
15fps + 15fps

Night Vision High-performance infrared LED

On-screen Display (OSD) Date & time, vehicle speed, coordinates, G-sensor data

TF Card Storage Micro SD, UHS-1 128GB Max. FAT32 file system

Continuous mode
Recording Mode Event mode
Manual mode

Event Data Trigger recordings before and after an event

Video Format MP4

Image Format JPG

Microphone Built-in

Speaker Built-in

www.queclink.com [email protected] +86 21 5108 2965

 www.queclink.com [email protected] +86 21 5108 2965

OBD OBDII Connectivity

Hotspot Sharing

BLE 5.0

Mini Size

Plug and Play

Scheduled Timing Report

Geo-fences

GV501LG Power On Report

LT E C a t 4 e a s y i n s t a l l O B D t ra c k e r w i t h
WiFi AP mode, specially designed for insurance, Driving Behavior Monitoring
car leasing and real-time monitoring applications
Crash Detection
74.8 x 51.8 x 22.55mm
69g (2.43oz) S
2.94”(L) x 2.04”(W) x 0.89”(H)
Tow Alarm
-30℃ ~ +80℃ Operating Voltage: 8V to 16V DC

GV501LG is Queclink’s new range of OBD router product added super-fast in-vehicle Internet access to our range of OBD
products. Queclink’s robust telematics firmware and reliable OBD data access is complemented with reliable shared internet
access for any car or light truck. Van drivers, sales people and other mobile employees can all benefit from in-vehicle internet
access 24x7. It supports standard vehicle data gathering of VIN, odometer and diagnostic trouble code (DTC) for vehicle
maintenance applications.

UBI Car Leasing Hotspot Sharing

Driving Smarter IoT

GV501LG
Region Operating Band GNSS Type Position Accuracy (CEP)

LTE Cat 4
LTE-FDD:B1/B2/B3/B4/B5/B7/B8/
B12/B13/B18/B19/B20/B25/B26/
Worldwide B28 u-blox All-in-One GNSS receiver Autonomous: < 2.5m
LTE-TDD: B38/B39/B40/B41
WCDMA: B1/B2/B4/B5/B6/B8/B19
GSM: 850/900/1800/1900MHz

Interfaces

OBD LED GPS LED

CEL LED
16 PIN Interface

External power supply

OBDII Port Allow information to be read from OBDII port

Support protocol: ISO9141, KWP2000_FAST, KWP2000_5BPS, ISO15765
CAN250K_11BIT, CAN250K_29BIT, CAN500K_11BIT, ISO15765 CAN500K_29BIT

Cellular Antenna Internal only

GNSS Antenna Internal only

BLE Antenna Internal only

WiFi Antenna Internal only

LED Indicators OBD, Cellular network, GNSS

Micro USB Interface Used for configuration, upgrading and debugging

www.queclink.com [email protected] +86 21 5108 2965

WR100LAU
Compact and secure dual-SIM LTE & WiFi router with RS232 or RS485 for various industrial
use scenarios.

4G LTE Cat 4

Reliable Connectivity with Dual SIM

IEEE 802.11 b/g/n 2.4 GHz

VPN Secure Connection

2 Ethernet Interfaces (1 WAN/LAN, 1 LAN)

RS232/RS485 Serial Port

WR100LAU is Queclink’s first industrial router. With high-speed cellular connectivity up to 150Mbps
(LTE CAT4) and an industrial serial port interface, WR100LAU provides a platform for data-intensive IoT
applications such as industrial automation, smart city, transportation and retail. With Queclink’s unique
technology, the product can be installed in vehicles and used alongside our existing range of tracking
products to offer a reliable connectivity environment.

Vending Machine Enterprise Network Backup ATM

Medical Machine Charging Station IP Camera Monitoring

Driving Smarter IoT

WR100LAU

Region Mobile WiFi Ethernet

LTE Cat 4
Latin 1 x FE (LAN/WAN)
WCDMA IEEE 802.11 b/g/n, 2.4 GHz
America 1 x FE (LAN)
GSM

Front View Rear View

Mobile Signal Strength LED

LAN2 Ethernet Port

Reset Button Dual SIM Slot
CEL LED

Power LED

WAN/LAN1 Ethernet Port

Power Socket
RS232/RS485 Serial Port WiFi Antenna 4G AUX Antenna 4G Main Antenna

WiFi LED

Hardware Software

Operating
Linux based OpenWrt OS
Dimensions 90mm x 90mm x 24mm
System
Weight 200g
Mobile, Wire, WiFi. Primary and backup
Operating Alternative Link link configured as requirement, auto load
balance.
8 - 32V DC
Voltage

Operating -30℃ to + 70℃ Network NAT, Static/Dynamic routing(Rip Protocol),

Temperature -40℃ to + 80℃ for storage Features Firewall

Connection
Ping Reboot, Scheduled Reboot
1 WAN (10/100Mbps)
Monitoring
Ethernet Ports
1 LAN (10/100Mbps)

Remote
Mobile 4G LTE Cat 4, 3G, 2G
WEB UI, SSH, SMS, FOTA
Management
WiFi IEEE 802.11 a/b/g/n 2.4 GHz

1 RS232 serial port

Serial Port
(RS485 serial port on demand)

SIM Slots 2

Mobile
2x SMA
Antennas

WiFi Antenna 1x RP-SMA

Power Sockets 4 pin

Power, Mobile Status, Mobile Signal

LED Indicators
Strength, WiFi

Reset Button 1

www.queclink.com [email protected] +86 21 5108 2965

WR200LG
High performance and secure dual-SIM LTE & WiFi router with GNSS, I/Os, RS232 and RS485
for various industrial use scenarios

4G LTE Cat 4

Reliable Connectivity with Dual SIM

IEEE 802.11 b/g/n/ac, 2.4/5 GHz

VPN Secure Connection

4 Ethernet Interfaces (1 WAN, 3 LAN)

RS232 and RS485 Serial Port, 10 PIN I/O

GNSS Location

WR200LG is Queclink’s advanced industrial router. Compared with Queclink basic industrial router
series,it provides faster transmission rate and allows more devices connection. With high-speed cellular
connectivity up to 150Mbps (LTE CAT4) and multiple serial port interface, WR200LG provides a platform for
data-intensive IoT applications such as industrial automation, smart city, transportation and retail. With
Queclink’s unique technology, the product can be installed in vehicles and used alongside our existing
range of tracking products to offer a reliable connectivity environment.

Vending Machine Enterprise Network Backup ATM

Bus Wifi Sharing Charging Station IP Camera Monitoring

Driving Smarter IoT

WR200LG

Region Mobile WiFi Ethernet

LTE Cat 4
1 x FE (WAN)
Global WCDMA IEEE 802.11 b/g/n/ac, 2.4/5 GHz
3 x FE (LAN)
GSM

Front View Rear View

RS485 Serial Port

GPS 4G Main Antenna

RS232 Serial Port PWR WiFi GPS CEL SIGNAL
I/O
USB
WiFi Antenna 2.4G
Reset Button

WAN LAN2
LAN1 LAN3 Power Socket Dual SIM Slot
4G AUX Antenna WiFi Antenna 2.4G
WiFi Antenna 5G

Hardware 4 pin
Power Sockets
Power, 1 digital input, 1 digital output
222 x 139 x 44mm
Dimensions Inputs/Outputs 10 pin
8.74”(L) x 5.47”(W) x 1.73”(H)

Weight 720g (25.4oz) Power, WiFi, GPS, Mobile Status,

LED Indicators Mobile Signal Strength
Operating Voltage 8V to 32V DC 2x WAN, 6x LAN

-30℃ to + 75℃ Reset Button 1

Operating Temperature
-40℃ to + 80℃ for storage

1 WAN (10/100Mbps)
Ethernet Ports
3LAN (10/100Mbps)

Mobile 4G LTE Cat 4, 3G, 2G Software

WiFi IEEE 802.11 b/g/n/ac, 2.4/5 GHz

Operating System Linux based OpenWrt OS
RS232 Serial Port 1
Mobile, Wired, WiFi. Primary and
RS485 Serial Port 1 Alternative Link backup link configured as requirement,
auto load balance.
USB Port 1
NAT, Static/Dynamic routing
Networking Features
SIM Slots 2 (Rip Protocol), Firewall

Mobile Antennas 2x SMA Connection Monitoring Ping Reboot, Scheduled Reboot

Remote Management WEB UI, SSH, SMS, FOTA

WiFi Antennas 3x RP-SMA

GNSS Antenna 1x SMA

www.queclink.com [email protected] +86 21 5108 2965

 www.queclink.com [email protected] +86 21 5108 2965

Self-Fit Installation

IP67 Waterproof

Virtual Ignition Detection

1Hz GNSS sampling

1600Hz 6-Axis Accelerometer

Accelerometer Self-calibration

Driving Behavior Monitoring

Crash Detection & Data Packet

GB100MG Scheduled Report

Geo-fences
LTE Cat M1/NB1 waterproof battery-mounted insurance
telematics device allowing customer self-fit and lower cost Jamming Detection
installation
Tow Alarm

OTA Control
130g (4.59oz) 5.30” (L) × 2.66” (W) × 0.58” (H)
S
134.6mm(L) × 67.5mm(W) × 14.8mm(H) Up to 10,000 Buffer Messages
-30℃ ~ +70℃ Operating Voltage: 8V to 32V DC
High temperature NiMH, 200 mAh BLE 4.2

The GB100MG is the LTE version of our proven usage-based insurance telematics product GB100P. Its built-in 6-axis
accelerometer allows accurate accident data sampled at up to 1600 times per second. With built-in BLE it supports wireless
accessories; thus allowing the product to be flexible and suitable for applications beyond insurance data acquisition. The
GB100MG is a vehicle battery mounted product specifically designed to lower the installation costs of telematics products in the
usage-based insurance market. Its internal battery and waterproof enclosure maintain stable and reliable performance when
installed in the engine compartment of vehicles. The GB100 series is proven to provide accurate and reliable data under the
metal hood of a vehicle engine and has been used successfully in the delivery of several large UBI projects for insurers and
service providers alike.

UBI Automobile Finance Stolen Vehicle Recovery

Driving Smarter IoT

GB100MG

Region Network/Operating Band GNSS Type Position Accuracy (CEP) Certificate

Cat M1/Cat NB1:
LTE FDD: B1/B2/B3/B4/B5/
B8/B12/B13/B18/B19/B20/
B25/B28 Qualcomm GNSS
Worldwide Autonomous: < 2.5m FCC/Verizon
LTE TDD: B39 (For Cat M1 receiver
Only)
EGPRS:
850/900/1800/1900 MHz

Installation Guide

GB100MG Rear View Step 1 Step 2 Step 3

Interfaces

Cellular Antenna Internal only

GNSS Antenna Internal only

BLE Antenna Internal only

LED Indicator CEL, GNSS, PWR

www.queclink.com [email protected] +86 21 5108 2965

 www.queclink.com [email protected] +86 21 5108 2965

Multiple I/O Interfaces

1-wire Interface

2 RS232 Serial Ports

J1939 Bus Port

OTA Control

Scheduled Timing Report

Geo-fences

Crash Detection

GV350MG Driving Behavior Monitoring

Tow Alarm
LTE Cat M1/NB1 advanced vehicle tracker offering support
for wide variety of external peripherals and I/O options
Fuel Level Monitoring

80 x 48 x 25mm Support Temperature Sensor

75g (2.65oz) M
3.15”(L) x 1.89”(W) x 0.98”(H)
Operating Voltage: 8V to 32V DC
-30℃ ~ +80℃ Driver ID Identity
Li-Polymer, 250 mAh

The GV350MG improves on the GV300 based on customer feedback and adds LTE capability to our successful GV300 2G
product. The GV350MG’s CAN interface can be customized to suit specific protocols required by customers. This interface
customization has been utilized in tractor integration and other unique situations with specific CAN requirements. Heavy trucks
supporting J1939 FMS can be integrated with GV350MG and its multiple accessories such as dual fuel sensors, Garmin FMI
products, cameras and Queclink’s I/O extenders.

Fleet Management Cold Chain Transportation Monitoring

Driving Smarter IoT

 Queclink Wireless Solutions Co., Ltd.

GV350MG
Position Accuracy
Region Network/Operating Band GNSS Type Certificate
(CEP)

Cat M1/Cat NB1:

B1/B2/B3/B4/B5/B8/B12/B13/B18/
B19/B20/B25/B28 u-blox All-in-One CE/FCC/Verizon/E-mark/
Autonomous: < 2.5m
Worldwide LTE TDD: B39 (For Cat M1 Only) GNSS receiver Anatel
EGPRS:
850/900/1800/1900MHz

Multiple Interfaces

GSM LED / GPS LED / Power LED 16 PIN Interface

Battery Switch

Mini USB Interface GNSS Connector

1 positive trigger input for ignition detection

Digital Inputs
3 negative trigger inputs for normal use

Digital Output 1 digital output, open drain, 150 mA max drive current

Latched Digital Output 1 digital output with internal latch circuit, open drain, 150 mA max drive current

1 special I/O can be configured as a 0V-32V analogue input or an open drain

Configurable Input/Output
output with 150 mA max drive current

2 RS232 serial ports on 16 pin Molex type connector, for external devices
Serial Ports
(GARMIN protocol support)

CAN Bus Interface CAN 2.0A/B, SAE J1939

1-wire Interface Support 1-wire temperature sensor and iButton driver ID(maximum 8 channels)

Cellular Antenna Internal only

GNSS Antenna Internal antenna and optional external antenna

LED Indicators CEL, GNSS, PWR

Mini USB Interface Used for upgrading and debugging

www.queclink.com [email protected] +86 21 5108 2965

 www.queclink.com [email protected] +86 21 5108 2965

LTE Cat M1/NB2 with 2G Fallback

Covert Installation

OTA Control

Scheduled Report

Geo-fences

Crash Detection

Driving Behavior Monitoring

Tow Alarm

GV53MG Power on Report

LTE Cat M1/NB2 compact GNSS tracker for wide AES-256 Encryption
ranging light duty applications
Up to 10,000 Buffer Messages
87×55×12.5mm
95g (3.35oz) S 3.43”(L) × 2.17”(W) × 0.49”(H)
Operating Voltage: 8V to 32V DC
-30℃ ~ +80℃
Li-Polymer, 190 mAh

The GV53MG is the upgraded LTE Cat M1/NB2 version of GV50MG. It integrates the latest low-power wide area network standards and
covers a broader area, making it more flexible to deploy. It is a compact, ultra-thin product allowing covert and easy installation. The product
offers basic digital I/Os that can be used for ignition detection and vehicle control. An extra configurable I/O enables flexible applications. The
GV53MG supports AES-256 encryption to secure business-critical data, guard against unauthorized access and ensure data integrity. The
product is designed for various use cases such as auto financing, buy here pay here (BHPH), car rental and leasing, basic fleet management
and stolen vehicle recovery.

Automobile Finance Car Leasing Stolen Vehicle Recovery

Driving Smarter IoT

GV53MG

Position
Region Network/Operating Band GNSS Type Certificate
Accuracy (CEP)

LTE Cat M1/NB2

Cat M1:
LTE-FDD: B1/B2/B3/B4/B5/B8/B12/B13/
B18/B19/B20/B25/B27/B28/B66/B85 u-blox All-in-One Autonomous:
Worldwide TBD
Cat NB2: GNSS receiver < 2.5m
LTE-FDD: B1/B2/B3/B4/B5/B8/B12/B13/
B18/B19/B20/B25/B28/B66/B71/B85
EGPRS: 850/900/1800/1900 MHz

Appearance

CEL LED / GNSS LED

7 PIN Interface

Interfaces

Digital Input 1 positive trigger input for ignition detection

Digital Output 1 digital output, open drain, 150 mA max drive current

1 special I/O can be configured as a negative trigger digital input or an open drain
Configurable Input/Output
output with 150 mA max drive current

Serial Port 1 TTL UART port for upgrading and debugging

Cellular Antenna Internal only

GNSS Antenna Internal only

LED Indicators CEL, GNSS

www.queclink.com [email protected] +86 21 5108 2965

 www.queclink.com [email protected] +86 21 5108 2965

IP67 Waterproof

Compact Size

Covert Installation

BLE 5.1

Zero Power Consumption

I/O Interfaces

OTA Control

Scheduled Report

Geo-fences

External Power Monitorin

GV57MG Speed Alarm

SOS Alarm

LTE Cat M1/NB1 waterproof compact GNSS tracker Tow Alarm

supporting BLE 5.1 for stolen vehicle recovery,
motorcycle monitoring and other basic tracking Virtual Ignition Detection
applications Driving Behavior Monitoring

Power on Report
84 x 50x 16.6mm
74g (2.61oz) S 3.31”(L) × 1.97”(W) × 0.65”(H)
Up to 10,000 Buffer Messages
Li-Polymer, 190 mAh
-30℃ ~ +80℃
Operating Voltage: 8V to 32V DC

The GV57MG is the LTE version of GV57. With waterproof design, it ensures the product remains reliable when installed in
the harsh environments. It offers basic digital I/Os that can be used for ignition detection and vehicle control. The product
features Queclink’s revolutionary zero power consumption, allowing owners to leave their cars and motorcycles unattended
for long periods of time without having to worry about a flat battery. The product is ideal for stolen vehicle recovery, motorcycle
monitoring and other basic tracking applications.

Stolen Vehicle Recovery Automobile Finance Motorcycle Monitoring

Driving Smarter IoT

GV57MG

Region Operating Band GNSS Type Position Accuracy (CEP) Certificate

LTE Cat M1/NB1

Cat M1：
B1/B2/B3/B4/B5/B8/B12/B13/B18/
B19/B20/B25/B27/B28/B66/B85 FCC/Verizon
Worldwide All-in-one Receiver Autonomous: < 2m
Cat NB1： (Planned)
B1/B2/B3/B4/B5/B8/B12/B13/B18/
B19/B20/B25/B28/B66/B71/B85
GSM: 850/900/1800/1900 MHz

Appearance

GNSS LED
CEL LED

5 PIN Interface

Interfaces

1 positive trigger input for ignition detection and other application

Digital Inputs
1 negative trigger input

Digital Output 1 digital output, open drain, 150 mA max drive current

Cellular Antenna Internal only

GNSS Antenna Internal only

BLE Antenna Internal only

LED Indicators GNSS, CEL

Micro USB Interface Used for upgrading and debugging

www.queclink.com [email protected] +86 21 5108 2965

 www.queclink.com [email protected] +86 21 5108 2965

Tamaño compacto

Tan fácil como conectar y usar

OBD Alimentacion por el Puerto OBDII

Reporte de tiempo programable

Geo cercas

Detección de choque

Detección de movimiento

Monitoreo de hábitos de manejo

GV500MA Alerta de batería baja

Rastreador LTE Cat M1/NB1 de fácil instalación diseñado

para aplicaciones de seguros, alquiler de coches y Reporte de encendido
monitoreo en tiempo real
Alerta de arrastre

1.95’’(L) × 1.91’’(W) × 0.86’’(H)

2.05oz (58g) S (49.49 × 48.5 × 21.9mm)
Voltaje de operación:8V a 32V DC
-30℃ ~ +80℃
Polímero de Litio 60 mAh

El GV500MA es un dispositivo compacto que se conecta al puerto OBDII del vehículo permitiendo una fácil instalación para los
clientes. El dispositivo es compatible con la red LTE Cat M1/NB1 en múltiples bandas para su funcionamiento en Norteamerica
con un sistema de respaldo con EGPRS.

UBI Renta de vehículos Recuperación de vehículos robados

Driving Smart IoT

GV500MA
Tipo de receptor
Región Banda operativa Precisión de posición (CEP) Certificación
GNSS

Cat M1/Cat NB1:

LTE FDD: B1/B2/B3/B4/B5/B8/B12/
América B13/B18/B19/B20/B25/B28 Receptor GNSS FCC/Verizon/
Autónomo:< 2.5m
del Norte LTE TDD: B39 (Sólo para el Cat M1) u-blox All-in-One PTCRB
EGPRS:
850/900/1800/1900MHz

Interfaces

CELL LED

GNSS LED 16 PIN Interface

Puerto OBDII Para fuente de energía externa

Antena GSM Interna

Antena GNSS 2 antenas GNSS internas; selecciona automáticamente la antena con mejor señal

Indicador LED CELL, GNSS

Interface Mini USB Para actualización y configuración

www.queclink.com [email protected] +86 21 5108 2965

 www.queclink.com [email protected] +86 21 5108 2965

Conectividad OBDII

Tamaño compacto

OBD Tan fácil como conectar y usar

BLE 4.2

Reporte de tiempo programable

Geo cercas

Detección de choque

Detección de movimiento

GV500MAP Monitoreo de hábitos de manejo

Dispositivo de Rastreo OBD de fácil instalación diseñado

para la industria aseguradora, la renta de vehículos y las Alerta de batería baja
aplicaciones de monitoreo en tiempo rea
Reporte de encendido

1.95’’(L) × 1.91’’(W) × 0.86’’(H)

2.05oz (58g) S (49.49 × 48.5 × 21.9mm) Alerta de arrastre
Voltaje de operación: 8V a 32V DC
-30℃ ~ +80℃
Polímero de Litio 60 mAh

El GV500MAP es un dispositivo OBD compacto que se conecta al puerto OBDII del vehículo permitiendo una fácil instalación
para los clientes. Cuenta con BLE 4.2 que se utiliza para la transmisión de datos. Su transreceptor interno OBD puede obtener
información de la computadora de a bordo del vehículo. El GV500MAP es compatible con la red LTE Cat M1/NB1 en múltiples
bandas para su operación en Norteamérica con un sistema de respaldo con EGPRS.

UBI Renta de vehículos Gestión de lotes

Driving Smart IoT

GV500MAP
Tipo de receptor
Región Banda operativa Precisión de posición (CEP) Certificación
GNSS

Cat M1/Cat NB1:

LTE FDD: B1/B2/B3/B4/B5/B8/B12/
América Receptor GNSS
B13/B18/B19/B20/B25/B28 Autónomo:< 2.5m FCC/Verizon
del Norte u-blox All-in-One
LTE TDD: B39 (Sólo para el Cat M1)
EGPRS: 850/900/1800/1900 MHz

Interfaces

CELL LED

GNSS LED 16 PIN Interface

Para fuente de energía externa

Permite que la información sea leída desde el puerto OBDII. Soporta Protocolos OBDII
Puerto OBDII
legislados: ISO 15765. Vehículos fabricados después de 2008 y ofrecidos a la venta en
los EE.UU.

Antena GSM Interna

Antena GNSS 2 antenas GNSS internas; selecciona automáticamente la antena con mejor senal

Antena BLE Interna

Indicador LED CELL, GNSS

Interface Mini USB Para actualización y configuración

www.queclink.com [email protected] +86 21 5108 2965

 www.queclink.com [email protected] +86 21 5108 2965

Ruggedized Case

BLE 4.2

IP67 Waterproof

Multiple I/O Interfaces

1-wire Interface

RS232 Port

OTA Control

GV600MG Scheduled Timing Report

Geo-fences
LTE Cat M1/NB1 rechargeable waterproof tracking
device supporting BLE 4.2 with 120 days standby time
designed for trailer, tanker and flatbed truck applications Low Power Alarm

138 × 66 × 38mm Power on Report

320g (11.29 oz) L
5.43’’(L) × 2.60’’(W) × 1.50’’(H)
Operating Temperature Two options:
-30℃ ~ +80℃ Fuel Level Monitoring
Li-ion, 3.7V, 5200 mAh, 18650 battery pack
Charging Temperature
+10℃ ~ +45℃ (For 5800mAh battery) Li-ion, 3.7V, 5800 mAh, 18650 battery pack

Support Temperature Sensor

Standby Time: (15 Min Online per Day,5800 mAh battery)

1 Report/Day 120 Days

The GV600MG is an LTE product specifically designed for heavy duty vehicles applications including trailer, tanker, reefer
and flatbed trucks. Its ruggedized waterproof design ensures the product is reliable when installed in a harsh environments
commonly found in heavy transportation such as fuel and chemical transportation. The GV600MG can work up to 3 months
without external power making it ideal for tracking trailers even when disconnected. It’s wide range of pre-integrated wired and
wireless accessories provided by Queclink or our carefully selected partners allow our customers to apply it in various fleet
industries.

Trailer Tracking Flatbed Truck Tracking Tanker Tracking

Driving Smarter IoT

 Queclink Wireless Solutions Co., Ltd.

GV600MG

Position Accuracy
Region Network/Operating Band GNSS Type Certificate
(CEP)

Cat M1/Cat NB1:

LTE FDD: B1/B2/B3/B4/B5/B8/
B12/B13/B18/B19/B20/B25/B28 u-blox All-in-One CE/FCC/Verizon/
Worldwide Autonomous: < 2.5m
LTE TDD: B39 (For Cat M1 Only) GNSS receiver E-Mark
EGPRS:
850/900/1800/1900MHz

Multiple Interfaces

Power LED / GPS LED / CEL LED

18 PIN Interface

Digital Input 1 positive trigger input for ignition detection

Analog Input 1 analog input (0V-32V)

1-wire Interface Support 1-wire temperature sensor

Power Output 1 power output (3.3V)

4 negative trigger inputs for normal use, or

Digital Inputs/Outputs
4 open drain outputs 150mA max drive current

Serial Port 1 RS232 port

Cellular Antenna Internal only

GNSS Antenna Internal only

BLE Antenna Internal only

LED Indicators CEL, GNSS, PWR

Connector 18 pin waterproof connector

www.queclink.com [email protected] +86 21 5108 2965

 www.queclink.com [email protected] +86 21 5108 2965

IP67 Waterproof

Multiple I/O Interfaces

Zero Power Consumption

OTA Control

Scheduled Report

Geo-fences

GV75MG
LTE Cat M1/NB1 waterproof advanced GNSS tracker for Crash Detection

motorcycle, quad bikes, watercraft and heavy machinery

applications
Driving Behavior Monitoring

102 × 46 × 20.5mm
110g (3.88oz) S
4.02” (L) × 1.81” (W) × 0.81” (H)
Up to 10,000 Buffer Messages
Operating Voltage: 8V to 32V DC
-30℃ ~ +80℃
Li-Polymer, 700 mAh

The GV75MG is the LTE version of the GV75W motorcycle tracker. The product’s dependability brings peace of mind to
motorcycle owners around the world. It features Queclink’s revolutionary zero power consumption, allowing bikers to leave
their motorcycles unattended for long periods of time without having to worry about a flat battery. The product’s waterproof and
dustproof enclosure makes it suitable not only for motorcycles but also for quad bikes, watercraft and heavy machinery.

Motorcycle Monitoring Watercraft Tracking Vehicle Security

Driving Smart IoT

 Queclink Wireless Solutions Co., Ltd.

GV75MG

Position Accuracy
Region Network/Operating Band GNSS Type Certificate
(CEP)

LTE Cat M1/NB1：

LTE-FDD: B1/B2/B3/B4/B5/B8/B12/
B13/B18/B19/B20/B25/B28 CE/FCC/
u-blox All-in-One Autonomous:
Worldwide Verizon/Sprint/
LTE-TDD: B39 (for Cat M1 only) GNSS receiver < 2.5m
Anatel
EGPRS:
850/900/1800/1900 MHz

Appearance

CEL LED
GNSS LED
Power LED

8 PIN Interface

Interfaces

2 digital inputs including

Digital Inputs 1 positive trigger input for ignition detection
1 negative trigger input for normal use

Digital Output 1 digital output, open drain, 150 mA max drive current

Latched Digital Output 1 digital output with internal latch circuit, open drain, 150 mA max drive current

Serial Port 1 RS232 serial port used for external devices

LTE Antenna Internal only

GNSS Antenna Internal only

LED Indicators CEL, GNSS, PWR

Jamming Detection Alarm based on jamming detection

www.queclink.com [email protected] +86 21 5108 2965

 Rapid Installation

Emergency Button

Water Resistant

OTA Control

Scheduled Report

GL320MG Geo-fences

LTE Cat M1/NB2 GNSS tracker with a user-friendly Motion Detection

panic button for personal safety management and asset
monitoring applications
Ignition Detection

93g (3.28oz) 39.9 × 26.7 × 77.9mm

S
1.57’’(L) × 1.05’’(W) × 3.07’’(H) Vibration Feedback
-20℃ ~ +60℃ Li-Polymer, 2600 mAh

Low Power Alarm

Standby Time:
Without Reporting 480 Hours
Use with Animal Collars
5 Min Reporting 260 Hours
10 Min Reporting 300 Hours

The GL320MG is the LTE version of our best-selling GL300, which is the most popular series in our range of asset trackers
with large deployments worldwide. It is used for a wide range of applications which require real-time location knowledge, such
as private investigations, package delivery, temporary tracking of vehicles, long distance transportation, endurance racing
and animal management. As one of the market leaders in reliable battery powered asset trackers, our products are targets for
imitation, but we are happy to say that up to this day, our GL300 still leads the field in battery life and overall performance.

Lone Worker Safety Asset Monitoring Stolen Vehicle Recovery

Driving Smarter IoT

GL320MG
Position Accuracy
Region Network/Operating Band GNSS Type Certificate
(CEP)

Cat M1:
LTE-FDD:B1/B2/B3/B4/B5/B8/
B12/B13/B18/B19/B20/B25/B26/
B27/B28/B66/B85
Cat NB2: u-blox All-in-One
Worldwide Autonomous: < 2.5m TBD
LTE-FDD:B1/B2/B3/B4/B5/B8/ GNSS receiver
B12/B13/B18/B19/B20/B25/B28/
B66/B71/B85
EGPRS:
850/900/1800/1900MHz

Appearance

GPS LED / Power LED / CEL LED

SIM Card Slot

Power Key

Function Button
USB Type-C Interface

Interfaces

1 positive trigger input for ignition detection

Digital Inputs
1 negative trigger input for normal use
Power Button Power on and power off, can be disabled via air interface protocol
Function Button with Vibration Feedback Emergency alert or instant geo-fence setting
Cellular Antenna Internal only
GNSS Antenna Internal only
LED Indicators CEL, GNSS, PWR
USB Type-C Interface Used for external power and configuration

Air Interface Protocol

Transmit Protocol TCP, UDP, SMS
Report position and status based on preset time intervals, distance, mileage or a
Scheduled Report
combination of these settings
Geo-fences Support up to 20 geo-fence regions
Low Power Alarm Alarm when battery is low
Power On/Off Report Report when the device is powered on and off
SOS/Emergency Alarm SOS alarm via pressing function button
Special Alarm Special alarm based on digital inputs
Motion Detection Motion alarm based on internal 3-axis accelerometer
 Micro Size

Covert Installation

3 Years Standby Time

BLE 5.2

IP67 compliant

Power Saving Mode

Continuous Mode

Automatic Mode Switching

GL53MG Dual Mode Anti-theft Alarm

LTE Cat M1/NB2 waterproof standby asset GNSS OTA Control

tracker supporting BLE 5.2 with up to 3-year
standby time Scheduled Timing Report

Geo-fences
75g (2.65oz) 64.6 × 51.0 × 20.9mm
M
2.54” (L) ×2.00” (W) × 0.82” (H)
Low Power Alarm
Lithium manganese dioxide battery,
-20℃ ~ +60℃
2400mAh
Wakeup Report

Standby Time： Motion Detection

1 Report/Day Up to 3 years
4 Reports/Day Up to 300 days Up to 10,000 Buffer Messages
5 Min Reporting Up to 5 days

The GL53MG is the upgraded LTE Cat M1/NB2 version of GL50MG. It integrates the latest low-power wide area network
standards and covers a broader area, making it more flexible to deploy. Adding a programmablebutton makes it ideal for
applications requiring rapid emergency alert orcheckingstatus of device. Its built-in BLE allows connectivity to diverse wireless
accessories. Micro-sized waterproof design allows it to be used in harsh environments.The GL53MG is an ideal product for SVR
application requiring LTE technology. In addition, it is also used for a wide range of applications including auto financing, asset
monitoring, car rental and leasing and more.

Asset Monitoring Stolen Vehicle Recovery Automobile Finance

Driving Smarter IoT

GL53MG

Region Network/Operating Band GNSS Type Position Accuracy (CEP)

LTE Cat M1/NB2

Cat M1：
LTE FDD:
B1/B2/B3/B4/B5/B8/B12/B13 /B18/
B19/B20/B25/B27/B28/B66/B85
Worldwide Cat NB2: All-in-One Receiver Autonomous: < 2.0m
LTE FDD:
B1/B2/B3/B4/B5/B8/B12/B13/B18/
B19/B20/B25/B28/B66/B71/B85
EGPRS：
850/900/1800/1900MHz

Appearance

STATUS LED
GPS LED

Power Button

Interfaces

Power Button Used for power on/off and working status checking
Cellular Antenna Internal only
GNSS Antenna Internal only
BLE Antenna Internal only
SIM Access Internal only (3FF SIM)
LED Indicators Status, GNSS

Air Interface Protocol

Command Set @Track protocol command

Transmit Protocol TCP, UDP, SMS
Power saving mode for long standby time
Working Modes
Continuous mode for emergency tracking
Scheduled Timing Report Report position and status at preset time intervals
Geo-fences Support up to 20 internal geo-fence regions
Low Power Alarm Alarm when internal battery is low
Wakeup Report Wake up at preset intervals
Motion Detection Motion detection based on internal 3-axis accelerometer
Reporting Frequency Adjustment Intelligent adjustment of reporting frequency
 Rapid & Covert Installation

7 Years Standby Time

OTA Control

Scheduled Timing Report

Geo-fences

Waterproof

Vibration Feedback

GL500MG Low Power Alarm

LTE Cat M1/NB1 waterproof GNSS tracker with up to 7 Wakeup Report

years standby time
Motion Detection
87 × 51 × 30mm
140g (4.94oz)
3.43’’(L) × 2.01’’(W) × 1.18’’(H) Automatic Mode Switching
160g (5.64oz) M
87 × 51 × 33.5mm
(magnetic case mounting version)
3.43’’(L) × 2.01’’(W) × 1.32’’(H)
(magnetic case mounting version) Temperature Monitoring
-20℃ ~ +60℃ 3 CR123A lithium batteries, 1400 mAh
Tamper Detection

Standby Time: Magnetic mounting (Optional)

1 Report/ Day (GNSS on) 5 Years
1 Report/ Day (Cell ID Only) 7 Years Use with Animal Collars

The GL500MG is an easy-to-deploy asset tracker built on Queclink’s innovative power management technology. It lasts for up to seven years
and features one of the longest battery lives among devices of its size in the market. The built-in light sensors make the product sensitive to
tamper attempts and its waterproof design allows it to be used in harsh environments. With internal temperature and light sensors, the product
is ideal for a wide range of environmental monitoring applications such as cold chain logistics, warehouse management, cargo trucking, high-
value static asset monitoring and more. The GL500MG supports several mounting alternatives which use unique clip on design to securely
attach the device to any asset.

Cold Chain Asset Monitoring Pharmaceutical Transportation

Driving Smarter IoT

GL500MG

Region Operating Band GNSS Type Position Accuracy (CEP) Certificate

Cat M1/Cat NB1:

LTE FDD: B1/B2/B3/B4/B5/B8/
B12/B13/B18/B19/B20/B25*/B28
u-blox All-in-One CE/FCC/Verizon/
Worldwide LTE TDD: B39 Autonomous: < 2.5m
GNSS receiver PTCRB/Anatel
(For Cat M1 Only)
EGPRS:
850/900/1800/1900MHz

Appearance

STATUS LED / Light Sensor

GPS LED

Light Sensor

Power Button

Optional Magnet Holder

Interfaces
Power Button Used for power on/off and switch of device working mode
LTE Antenna Internal only
GNSS Antenna Internal only
LED Indicators GNSS, Status

Air Interface Protocol

Command Set @Track protocol command

Transmit Protocol TCP, UDP, SMS
Power saving mode for long standby time
Working Modes
Continuous mode for emergency tracking
Scheduled Timing Report Report position and status at preset time intervals
Geo-fences Support up to 20 internal geo-fence regions
Low Power Alarm Alarm when internal battery is low
Wakeup Report Report when the device wakes up
Motion Detection Motion detection based on internal 3-axis accelerometer
Reporting Frequency Adjustment Intelligent adjustment of reporting frequency
 Rapid & Covert Installation

1 Year Standby Time

Supports Wireless Charging

OTA Control

Scheduled Timing Report

Geo-fences

IP67 Waterproof

GL501MG
Vibration Feedback

Low Power Alarm

LTE Cat M1/NB1 waterproof GNSS tracker supporting Wakeup Report

BLE 4.2 with up to 1 year standby time
Motion Detection

3.43’’(L) × 2.01’’(W) × 1.18’’(H) Automatic Mode Switching

5.29oz (150g) (87 × 51 × 30mm)
M
6.0oz (170g) 3.43’’(L) × 2.01’’(W) × 1.32’’(H) Temperature Monitoring
(magnet-mounted version) (87 × 51 × 33.5mm)(magnetic case mounting
version)
-25℃ ~ +60℃ Tamper Detection
Li-Polymer 3.7V/2400 mAh

Magnetic mounting (Optional)

Standby Time:

1 Report/ Day 1 year Use with Animal Collars

BLE 4.2

GL501MG is a waterproof GNSS tracker that features up to 1-year standby time powered by internal batteries and supports
wireless charging. The device is ideal for lot management and other tracking applications that require real-time monitoring on
temperature and light. It’ s buit-in Bluetooth can be used for data transmission. GL501MG supports LTE Cat M1/NB1 network on
multiple bands for operation globally with a fallback to EGPRS.

Lot Management Asset Monitoring Pharmaceutical Transportation

GL501MG

Position Accuracy
Region Network/Operating Band GNSS Type
(CEP)

LTE Cat M1/NB1：

LTE FDD: B1/B2/B3/B4/B5/B8/B12/B13/B18/
Worldwide B19/B20/B25/B28 u-blox All-in-One GNSS receiver Autonomous: < 2.5m
LTE TDD: B39 (for Cat M1 only)
EGPRS: 850/900/1800/1900 MHz

Appearance

STATUS LED / Light Sensor

GPS LED

Light Sensor

Power Button

Optional Magnet Holder

Interfaces

Power Button Used for power on/off and working status checking
LTE Antenna Internal only
GNSS Antenna Internal only
BLE Antenna Internal only
LED Indicators GNSS, Battery charging and discharging status

Air Interface Protocol

Command Set @Track protocol command

Transmit Protocol TCP, UDP, SMS
Power saving mode for long standby time
Working Modes
Continuous mode for emergency tracking
Scheduled Timing Report Report position and status at preset time intervals
Geo-fences Support up to 5 internal geo-fence regions
Low Power Alarm Alarm when internal battery is low
Wakeup Report Report when the device wakes up
Motion Detection Motion detection based on internal 3-axis accelerometer
Reporting Frequency Adjustment Intelligent adjustment of reporting frequency