Doors and Windows

S No Item Description Dimension/AreaNo. Units Brand/ MakeRemarks

1 Doors PRA/070/05
a Architraves- 70mm x 15mm Teak Roman 4'0" X 7'6" 1 -2022/PRA
PRA/070/05
Architrave
40mm x 10mmon front
Teak&Architrave
30 x 9mm on
on front
the rear.
& 30 x
b 3'0" X 7'6" 4 NAVA-WD-
-2022/PRA
40mm x 10mm
9 on the rear. Teak Architrave on front & 30 x PRA/070/05
c 9 on the rear40mm x 10mm Teak Architrave on 4'0" X 7'6" 1 NAVA-WD-
-2022/PRA
Architraves- PRA/070/05
d Shutter-
front 32mm
& 30 onthick
x 940mm thex double core flush door
rear. Teak 2'9" X 7'6" 7 NAVA-WD-
-2022/PRA
Architraves- 10mm Architrave on
Shutter- 32mm thick double core flush door PRA/070/05
NAVA-WD-
e front & 30 x 9 on the rear. 2'9" X 7'6" 1
-2022/PRA
2 Shutter- 32mm thick double core flush door
Windows
PRA/070/05
a UPVC Windows (As per the selection) 700 -2022/PRA
 Italian Marble Flooring : Flooring and Cladding
supply and laying of flooring in Common Areas, staircase-steps, risers, skirting etc. with 18mm Italian
S No Marble stone of approved Item Description
shade as per design with all exposed Area (Sft)
edges No. Units Brand/
polished MakeRemarks
etc all inclusive as
1 per design and approved drawing
a Common Area 1050
Vitrified Tile Flooring :
b Providing
Staircase and Arealaying of approved sized vitrified tile flooring of approved 410 shade and approved make
with butt joint
c Lift Wall Cladding over maximum 25mm Cement mortar or 8mm Adhesive
132 to make up required finished
floor level and approved make like ROFF/Laticrete/Bal Endure etc. pointing the joints with matching
d Pooja Room Flooring by Roff/Laticrete/Bal Endura inclusive of acid24
grout recommended wash and complete as per
2 specification.
Ground Floor
a Verandah Area 136
b Guest Bedroom 176
First Floor
c Master Bedroom Flooring 270
d Children Bedroom Flooring 210
e Vitrified Tile Skirting :
Sit-out Flooring 42
Providing and laying Vitrified tile SkirtingSecond75mm highFloor at all levels and floors approved color & design
over maximum 8mm thick Adhesive with tiles laid in true line, level and slope as required, including
f Toilet
Children
pointing Flooring
Bedroom
of : with
joints color pigments to match the color of tiles 270
Flooring of cement based grout
g Media Room Flooring selected vitrified
Providing
recommended and laying
by of
ROff/Laticrete/ tile flooring
Bal Endura of approved
or approved shade
equivalent
234 and The
make. make withshall
work buttinclude
joint of
minimum 20mm thick
cost of materials, labor,cement
curing,mortar
chasingbed of 1:4
of wall toto make
flush theup required
skirting finished
in line floorwall,
with the levelalland
lead and
h approved
Sit-out Flooring
lifts at all make and
levels, shade
loading andPVC corner and
unloading, Edge profiles,
transportation andpointing 64
all othertheincidental
joints with matching
charges etc.,grout
3 recommended by Laticrete/ Ardex Endura
complete and as directed by the Engineer-in-charge. inclusive of acid wash and complete as per specification.
This also includes providing and fixing the 1.5mm thick locally available poly vinyl sheet for the entire
a flooring to protect against Totalscratches,
Skirting etc. The poly vinyl sheet top covering shall be only removed
4 after approval from the Project Consultants.
Ground Floor
a Guest Bedroom Toilet Flooring 42
b Powder Room Flooring 20
First Floor
c Master Bedroom Toilet Flooring 56
d Children Bedroom Toilet Flooring 46
Second Floor
e Children Bedroom Toilet Flooring 56
f Media
the Room
true level,Toilet
planeFlooring
and pattern as indicated in the detail drawings 22and with necessary lead, lift,
5 staging, curing etc., complete as per the instructions of the Project Consultant/Engineer in charge.
Ground Floor
a Guest Bedroom Toilet Wall Cladding 200
b Powder Room Wall Cladding 140
First Floor
c Master Bedroom Toilet Wall Cladding 224
d Children Bedroom Toilet Wall Cladding 208
Second Floor
e Children Bedroom Toilet Wall Cladding 224
f Media Room Toilet Wall Cladding 144
 1220 mm centers with ceiling angles with ceiling angle of width 25mm x 10mm x 0.55mm thk fixed to soffit with
GI cleat and steel expansion fasteners. Ceiling section of 0.55 mm thk having web of 51.5 mm and two flanges of
26 mm each with lips of 10.5mmare then fixed to the intermediate channels with help of connecting clips and in
direction perpendicular to the intermediate channel with centers 12.5 mm tapered edge gypboard is then screw
fixed to ceiling section with 25 mm dry wall screws at 230mm centers. Screw fixing is done mechanically either
Grid
with Ceiling :
screw driver or drilling machine with suitable attachment. Finally the boards are to be joined and finished
Providing & Fixing of look
Armgy Suspended False Ceiling
so as to have a flush which includesCeiling System
finishing With Rockstrength//equivalent
the tapered and square edges of the 24mm Prelude
board with GRID.
joining
S No The module size of 600 x Item
600 xDescription
8mm ,the tile shall be laid on Area
Rockstrength (Sft) No.
Prelude Units
32 withBrand/
24 mm Make
compound. False ceiling rate quoted shall include providing necessary cut-outs for fixing Light fixtures (Inclusivewide TRemarks
-
section flanges
1 of all sizes colour white having rotary stitching on all T sections i.e. the Main Runner, 1200 mm & 600 mm
Cross Tees with a web height of 32mm and a load carrying capacity of 7.85 Kgs/M2 & minimum pull out strength
a of
Ground FloorThe T Sections have a Galvanizing of 90 grams per M2 and need
100 Kgs.. 683
to be installed with Suspension
system of
b First Floor Diken make. 473
INSTALLATION: To comprise main runner spaced at 1200mm centres securely fixed to the structural soffit using
c Second
Diken Floor
suspension
PVC False Ceiling :system (specifications below) at 1200mm maximum centre. 672 The First/Last Diken suspension
2 system
Armstrongat the
PVCend of each
False main
Ceiling runner
/ USG Boralshould not be
PVC False greater than 450mm from the adjacent wall. Flush fitting
Ceiling
1200mm long cross
a Verandah and Sit-out tees to be interlocked between main runners at 600mm 215centre to form 1200 x 600 mm
module. Cut cross tees longer than 600mm require independent support. 600 x 600mm module to be formed by
3 fitting 600mm long flush fitting cross tees centrally between the 1200 mm cross tees. Perimeter trim to be Diken
wall angles of size 3000x19x19mm, secured to walls at 450 mm maximum centres.
a Bathrooms 215
 Putty and Painting :
Providing and applying two coats of Asian Paints of desired shade on ceiling and wall surfaces, wherever
required at all heights to give an even and uniform shade, after thoroughly sand papering existing surfaces to
remove dust, dirt etc. and repairing dents, cracks, holes with POP to achieve level surface and applied over a
one coat of primer and two coats of puttyPutty
Asian/Birla Wall care as per manufacturer specification fully to give
and Painting
a smooth and even surface including thoroughly brushing the surface free from water / mortar dropping and
S No other foreign matter andItem
sandDescription
papered smooth, repeating a coat ofArea (Sft)
primer No. Units
complete asBrand/ MakeRemarks
per manufacturers
1 specifications and as directed.
a Total Area 7000