Scribd
Upload
30 views3 pages

Code Ardiuno Led

This document contains code for scrolling text display on a Parola hardware module. It defines constants for the hardware configuration, includes libraries for the display module and user interface controls. Global variables store the current and next messages, scrolling properties. The setup initializes the display, serial communication and user interface. The main loop handles scrolling the display, checking for new messages and reading any serial input. It allows controlling the scrolling properties through the serial port or optional user interface controls.

Uploaded by

Christmas Yan Carnegie
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
30 views3 pages

Code Ardiuno Led

This document contains code for scrolling text display on a Parola hardware module. It defines constants for the hardware configuration, includes libraries for the display module and user interface controls. Global variables store the current and next messages, scrolling properties. The setup initializes the display, serial communication and user interface. The main loop handles scrolling the display, checking for new messages and reading any serial input. It allows controlling the scrolling properties through the serial port or optional user interface controls.

Uploaded by

Christmas Yan Carnegie
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 3

#include <MD_Parola.

h>
#include <MD_MAX72xx.h>
#include <SPI.h>

// set to 1 if we are implementing the user interface pot, switch, etc


#define USE_UI_CONTROL 0

#if USE_UI_CONTROL
#include <MD_UISwitch.h>
#endif

// Turn on debug statements to the serial output


#define DEBUG 0

#if DEBUG
#define PRINT(s, x) { Serial.print(F(s)); Serial.print(x); }
#define PRINTS(x) Serial.print(F(x))
#define PRINTX(x) Serial.println(x, HEX)
#else
#define PRINT(s, x)
#define PRINTS(x)
#define PRINTX(x)
#endif

// Define the number of devices we have in the chain and the hardware interface
// NOTE: These pin numbers will probably not work with your hardware and may
// need to be adapted
#define HARDWARE_TYPE MD_MAX72XX::PAROLA_HW
#define MAX_DEVICES 11
#define CLK_PIN 13
#define DATA_PIN 11
#define CS_PIN 10

// HARDWARE SPI
MD_Parola P = MD_Parola(HARDWARE_TYPE, CS_PIN, MAX_DEVICES);
// SOFTWARE SPI
//MD_Parola P = MD_Parola(HARDWARE_TYPE, DATA_PIN, CLK_PIN, CS_PIN, MAX_DEVICES);

// Scrolling parameters
#if USE_UI_CONTROL
const uint8_t SPEED_IN = A5;
const uint8_t DIRECTION_SET = 8; // change the effect
const uint8_t INVERT_SET = 9; // change the invert

const uint8_t SPEED_DEADBAND = 10;


#endif // USE_UI_CONTROL

uint8_t scrollSpeed = 25; // default frame delay value


textEffect_t scrollEffect = PA_SCROLL_LEFT;
textPosition_t scrollAlign = PA_LEFT;
uint16_t scrollPause = 2000; // in milliseconds

// Global message buffers shared by Serial and Scrolling functions


#define BUF_SIZE 75
char curMessage[BUF_SIZE] = { "" };
char newMessage[BUF_SIZE] = { "SMK PERPAJAKAN RIAU" };
bool newMessageAvailable = true;

#if USE_UI_CONTROL
MD_UISwitch_Digital uiDirection(DIRECTION_SET);
MD_UISwitch_Digital uiInvert(INVERT_SET);

void doUI(void)
{
// set the speed if it has changed
{
int16_t speed = map(analogRead(SPEED_IN), 0, 1023, 10, 150);

if ((speed >= ((int16_t)P.getSpeed() + SPEED_DEADBAND)) ||


(speed <= ((int16_t)P.getSpeed() - SPEED_DEADBAND)))
{
P.setSpeed(speed);
scrollSpeed = speed;
PRINT("\nChanged speed to ", P.getSpeed());
}
}

if (uiDirection.read() == MD_UISwitch::KEY_PRESS) // SCROLL DIRECTION


{
PRINTS("\nChanging scroll direction");
scrollEffect = (scrollEffect == PA_SCROLL_LEFT ? PA_SCROLL_RIGHT :
PA_SCROLL_LEFT);
P.setTextEffect(scrollEffect, scrollEffect);
P.displayClear();
P.displayReset();
}

if (uiInvert.read() == MD_UISwitch::KEY_PRESS) // INVERT MODE


{
PRINTS("\nChanging invert mode");
P.setInvert(!P.getInvert());
}
}
#endif // USE_UI_CONTROL

void readSerial(void)
{
static char *cp = newMessage;

while (Serial.available())
{
*cp = (char)Serial.read();
if ((*cp == '\n') || (cp - newMessage >= BUF_SIZE-2)) // end of message
character or full buffer
{
*cp = '\0'; // end the string
// restart the index for next filling spree and flag we have a message
waiting
cp = newMessage;
newMessageAvailable = true;
}
else // move char pointer to next position
cp++;
}
}

void setup()
{
Serial.begin(57600);
Serial.print("\n[Parola Scrolling Display]\nType a message for the scrolling
display\nEnd message line with a newline");

#if USE_UI_CONTROL
uiDirection.begin();
uiInvert.begin();
pinMode(SPEED_IN, INPUT);

doUI();
#endif // USE_UI_CONTROL

P.begin();
P.displayText(curMessage, scrollAlign, scrollSpeed, scrollPause, scrollEffect,
scrollEffect);
}

void loop()
{
#if USE_UI_CONTROL
doUI();
#endif // USE_UI_CONTROL

if (P.displayAnimate())
{
if (newMessageAvailable)
{
strcpy(curMessage, newMessage);
newMessageAvailable = false;
}
P.displayReset();
}
readSerial();
}

You might also like