Multemp SRL2-spec

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

Low-noise, wide-temperature range

Wide-temperature range rolling bearing grease


As more and more electric motors and car electrical FOUR MAIN CHARACTERISTICS
components are becoming smaller and lighter with higher 1 Noise Suppressant Properties
technical advantages, bearings and other lubrication points are Removal of impurities from main raw materials, strict selection
exposed to increasingly higher temperatures. Requirement of additives and use of base oil of appropriate viscosity,
from lubricant in this area are very severe including not only as well as special process in a dust-free factory have enabled
high temperature performance, but also low noise profile, Multemp SRL to realize quieter running of bearings.
low-temperature performance and rust prevention.
Multemp SRL is a wide-temperature long-life grease 2 Performance Life at Elevated Temperatures
specifically designed to meet these stringent performance Performance life of Multemp SRL lasts several times longer
requirements, and has been widely accepted with than those of other wide-temperature range roller bearing
a good track record. greases available in the market.
Multemp SRL is suitable for use in bearings at elevated
temperatures for a long period.
Under regular conditions, Multemp SRL can largely extend
the interval of grease refilling or bearing replacement.
3 Low-Temperature Performance
Multemp SRL is formulated with excellent synthetic lubricating
oils and designed so that the structure causes the minimum
internal resistance. Multemp SRL can be used as low as -40℃,
thereby easing cold starting of precision machine and
small-size motors.
4 Anti-rust Properties
Rust often causes a problem especially with car elctrical
components exposed to salt water and with electric motors in
the presence of varnish. Multemp SRL with its reinforced
anti-rust property can provide protection not only from
moisture in the air but also from these severe rust-causing
PRODUCT PACKAG GINNG factors.
・2.5 kg litho tin×6 (ca
arton)
・18 kg pail
・180 kg drum
Typical analyses of MULTEMP SRL

Test item Multemp SRL Test method


Appearance light brown, buttery ー
Thickener Lithium soap −
Worked penetration 250 ASTM D217
Dropping point ℃ 190 ASTM D566
Copper strip corrosion 100℃, 24h pass ASTM D4048
Evaporation loss mass % 99℃, 22h 0.30 ASTM D972
Oil separation mass % 100℃, 24h 1.2 ASTM D6184-98 Mod.
Oxidation stability MPa 99℃, 100h 0.025 ASTM D942
10 µm or larger 400
Foreign particles 25 µm or larger 100
FTMS 791C-3005 Mod.
particles/cm3 75 µm or larger 0
125 µm or larger 0
Working stability 305 FTMS 791C-313
Water washout mass % 38℃,1h 1.3 ASTM D1264
Starting torque 7.9
−30℃
Low-temperature torque Running torque 2.5
ASTM D1478-63
N・cm Starting torque 11
−40℃
Running torque 2.8
Corrosion preventive
52℃, 48h #1 ASTM D1743-73
properties
Base oil kinematic
40℃ 26.0 ASTM D445
viscosity mm2/s
Life performance h 125℃ 4000 ASTM D1741

Anderon Test (Initial~5s) Life Performance (ASTM D1741, 125℃)

4000
4000
Bearing:608
M-band
12

3000
10
Time (h)

8
Anderon

2000

6
NLGI 2 Lithium grease
on the market
4
1000

2 350
Multemp SRL

0
0 1 2 3 4 5 Multemp NLGI 2
SRL Lithium
Time (s) grease
on the
market

Dentsu-Kosan-Dai-3 Bldg., 2-16-7, Ginza. Chuo-ku, Tokyo 104-0061, Japan


Phone:(03)3543-5814 Facsimile:(03)3545-6259
URL http://www.kyodoyushi.co.jp/
’03/3 PDF PSE1
Printed in Japan

You might also like