Scribd Logo
Upload

Welcome to Scribd!

  • 5 views

    Relevant Instructions For External Power Supply and Wiring of 2-Wire Video Intercom Products

    Uploaded by

    herrera.86
    The document provides instructions for powering and wiring various Hikvision 2-wire intercom devices, including distributors, door stations, and indoor stations. It specifies the maximum power consumption and transmission distances for each device model using different wire gauges. Installation guidelines recommend keeping total power consumption below limits, connecting door stations to channel 6, and cascading up to 15 distributors or using a network switch for larger systems.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Relevant Instructions For External Power Supply and Wiring of 2-Wire Video Intercom Products

    Uploaded by

    herrera.86
    5 views4 pages
    The document provides instructions for powering and wiring various Hikvision 2-wire intercom devices, including distributors, door stations, and indoor stations. It specifies the maximum power consumption and transmission distances for each device model using different wire gauges. Installation guidelines recommend keeping total power consumption below limits, connecting door stations to channel 6, and cascading up to 15 distributors or using a network switch for larger systems.

    Original Title

    Relevant instructions for external power supply and wiring of 2-wire video intercom products

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides instructions for powering and wiring various Hikvision 2-wire intercom devices, including distributors, door stations, and indoor stations. It specifies the maximum power consumption and transmission distances for each device model using different wire gauges. Installation guidelines recommend keeping total power consumption below limits, connecting door stations to channel 6, and cascading up to 15 distributors or using a network switch for larger systems.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    5 views4 pages

    Relevant Instructions For External Power Supply and Wiring of 2-Wire Video Intercom Products

    Uploaded by

    herrera.86
    The document provides instructions for powering and wiring various Hikvision 2-wire intercom devices, including distributors, door stations, and indoor stations. It specifies the maximum power consumption and transmission distances for each device model using different wire gauges. Installation guidelines recommend keeping total power consumption below limits, connecting door stations to channel 6, and cascading up to 15 distributors or using a network switch for larger systems.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    Relevant instructions for external power supply

    and wiring of 2-wire video intercom products


    （2020-1-20）
    Involved model:

    Indoor Station DS-KH6320-WTE2


    Modular Door Station DS-KD8003-IME2
    Device Model
    DS-KAD706
    Distributor
    DS-KAD704

    Power description:
    (1) 2-Wire Distributor
    CH6 CH1-5
    KAD706 16W 6W
    CH4 CH1-3
    KAD704 8W 6W

    (2) Modular Door Station:


    The main module & the sub-module maximum power consumption:
    Stable power consumption
    DS-KD8003-IME2 4W
    DS-KD-KK 0.8W
    DS-KD-KP 1W
    DS-KD-DIS 2.5W
    DS-KD-E 0.8W
    DS-KD-M 0.8W
    DS-KD-INFO 1.5W

    (3) Indoor Station


    Stable power consumption
    DS-KH6320-WTE2 6W

    Example of the calculation model of the modular door station sub-module


    The sum of the power consumption of each module must be less than the total power
    consumption of the power supply.
    2-wire
    Model DS-KD8003-IME2 DS-KD-DIS DS-KD-KP / /
    Quantity 1 1 1 / /
    Power 4W 2.5W 1W Total：7.5W
    Because 7.5W < 8W, we can support powering this device through KAD706 channel 6 or
    KAD704 channel 4.

    2-wire
    Model DS-KD8003-IME2 DS-KD-M DS-KD-KK /
    Quantity 1 1 12 /
    Power 4W 0.8W 9.6W Total：14.4W
    Because 8W < 14.4W < 16W, we can support powering this device through KAD706
    channel 6.

    Wire testing standards:


    (1) When there are multiple cores in one parallel line, only one pair of closed cores are
    allowed to transmit signal. It is not allowed to use multiple pair of cores in one cable to
    transmit signal;
    (2) When using parallel lines, it is suggested to use those with shielding layer. If dual
    core or multiple core parallel lines without shielding layer are routed, stability of signal
    transmission can be effected. You need to run a test before installation;
    (3) Impedance of twist pair in network cable are over 42Ω/100m, so network cable
    cannot transmit enough power to indoor station. Network cable is not allowed to use
    during installation;
    (4) Strong electricity and weak electricity cannot be wired in the same route, they need
    to be wired separately and the distance should be more than 0.5 meter;

    Table A

    Twisted Pair : Twisted Pair : Twisted Pair : Twisted Pair : Parallel lines
    Routing Path
    24AWG (0.2𝑚𝑚2) 20AWG (0.5𝑚𝑚2) 18AWG (0.8𝑚𝑚2) 16AWG (1𝑚𝑚2) (0.5𝑚𝑚2~0.8𝑚𝑚2 )

    DS-KAD706-S-DS- Transmission Transmission Transmission Transmission Transmission

    KAD706 Distance≤60m Distance≤60m Distance≤60m Distance≤50m Distance≤35m

    DS-KAD706-DS- Transmission Transmission Transmission Transmission Transmission

    KAD706 Distance≤60m Distance≤60m Distance≤60m Distance≤50m Distance≤35m

    DS-KAD706-DS- Transmission Transmission Transmission Transmission Transmission

    KD8003-IME2 Distance≤35m distance≤60m distance≤60m distance≤50m distance≤35m

    DS-KAD706-DS- Transmission Transmission Transmission Transmission More parameters in

    KH6320-WTE2 Distance≤35m Distance≤100m Distance≤100m Distance≤100m Table B

    Table B

    Routing Path Parallel lines: Parallel lines: Parallel lines: Parallel lines:
    24AWG (0.2𝑚𝑚2 ) 20AWG (0.5𝑚𝑚2 ) 18AWG (0.8𝑚𝑚2 ) 16AWG (1𝑚𝑚2 )

    DS-KAD706- Transmission Transmission Transmission Transmission

    DS- KH6320-WTE2 Distance≤50m Distance≤100m Distance≤100m Distance≤100m

    Device Installation
    (1) Installation environment (temperature, moisture etc.) need to follow requirements in
    specification or power output can be effected
    (2) Power consumption of modular door station (main module and sub modules) should be
    less than 12W. Please reach local technical support if you are not sure about power
    consumption of each module. Door station should be connected to CH6 of the video/audio
    distributor. If modular door station is connected to any terminal of CH1 to CH5, up to 3 sub
    modules can be connected;
    (3) Indoor station should be connected to any terminal of CH1 to CH5 of the video/audio
    distributor;
    (4) Up to 15 video/audio distributor can be cascaded. If more distributors are needed, you
    should cascade network switch supporting 1000Mbps. The whole 2-wire system can have up
    to 500 devices.
    (5) Power supply must be certified by Hikvision;
    (6) Indoor station needs to use firmware released after October, 2019
    See Far Go Further
    HIKVISION Technical Support

    You might also like