995 Cat

Download as pdf or txt
Download as pdf or txt
You are on page 1of 18

995

Wheel Loader

Technical Specifications
Configurations and features may vary by region. Please consult your Cat® dealer for availability in your area.

Table of Contents

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Sound Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Operating Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Hydraulic System – Steering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Transmission . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Hydraulic System – Lift/Tilt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Bucket Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Hydraulic Cycle Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Moderate to High Digging Resistance . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Complete System Fill . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Low to Moderate Digging Resistance . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Axles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Operating Specifications – Standard Lift . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Brakes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Operating Specifications – High Lift . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Cooling System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Standard and Optional Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15


995 Wheel Loader Specifications

Engine Transmission
Engine Model Cat® 3516E Transmission Type Cat Planetary Power Shift
Emissions U.S. EPA Tier 4 Final/ Forward 1 7.4 km/h 4.6 mph
EU Stage V or Forward 2 12.9 km/h 8.0 mph
U.S. EPA Tier 1 equivalent
Forward 3 21.9 km/h 13.6 mph
Rated Speed 1,600 rpm
Reverse 1 8.1 km/h 5.0 mph
Engine Power – ISO 14396:2002 1377 kW 1,847 hp
Reverse 2 14.1 km/h 8.8 mph
Gross Power – SAE J1995:2014 1394 kW 1,870 hp
Reverse 3 24.0 km/h 14.9 mph
Net Power – SAE J1349:2011
Direct Drive – Forward 1 Lock-up disables
Standard Ambient 1297 kW 1,739 hp
Direct Drive – Forward 2 14.0 km/h 8.7 mph
High Ambient 1265 kW 1,696 hp
Direct Drive – Forward 3 24.5 km/h 15.2 mph
Bore 170 mm 6.7 in
Direct Drive – Reverse 1 Lock-up disables
Stroke 215 mm 8.5 in
Direct Drive – Reverse 2 15.5 km/h 9.6 mph
Displacement 78.1 L 4,766 in3
Direct Drive – Reverse 3 27.0 km/h 16.8 mph
Peak Torque @ 1,200 rpm – SAE J1995 11 591 N·m 8,549 lbf-ft
• Travel speeds based on 58/85-57 tires.
Torque Rise 39%
• The power ratings apply when tested under the reference conditions Hydraulic System – Lift/Tilt
for the specified standard.
• The net power advertised is the power available at the flywheel when Lift/Tilt System – Circuit Positive Flow Control
the engine is equipped with fan, alternator, air cleaner and muffler. Lift/Tilt System – Pumps Variable Displacement
• The gross power advertised is with the fan at maximum speed. Piston
Maximum Flow at 1,700 rpm 2047 L/min 541 gal/min
Operating Specifications Engine Speed
Operating Weight – Standard 245 192 kg 540,555 lb Relief Valve Setting – Lift/Tilt 34 500 kPa 5,004 psi
Operating Weight – High Lift 246 962 kg 544,457 lb Cylinders, Double Acting
Rated Payload – Standard Lift, Bore and Stroke 370 × 14.6 ×
1713 mm 67.4 in
Moderate to High Digging Resistance 45.3 tonnes 50 tons
Tilt, Bore and Stroke 310 × 12.2 ×
Low to Moderate Digging Resistance* 54.4 tonnes 60 tons
1086 mm 42.8 in
Rated Payload – High Lift
Pilot System Open Loop and
Moderate to High Digging Resistance 45.3 tonnes 50 tons Pressure Reducing
Low to Moderate Digging Resistance* 49.9 tonnes 55 tons
Bucket Capacity Range 17.2-43.6 m3 22.3-57 yd3
*Please contact your local dealer to determine if your application
is suitable for this increased rated payload.

2
995 Wheel Loader Specifications

Hydraulic Cycle Time Cooling System


Rack Back 4.9 seconds Ambient Capability Hydraulically Driven Demand Fan
Raise 12.6 seconds Standard 43° C 109.4° F
Dump 3.1 seconds High (Tier 1 equivalent) 55° C 131° F
Lower Float Down 4.2 seconds High (Tier 4 Final) 53° C 127.4° F
Total Hydraulic Cycle Time 23.5 seconds
(empty bucket) Sound Performance
Standard Suppression
Complete System Fill
Operator Sound Level
Fuel Tank (standard) 3240 L 856 gal (ISO 6396:2008)
Fuel Tank (with 24 hr attachment) 5350 L 1,414 gal Tier 1 Equivalent 72 dB(A) 71 dB(A)
Cooling System 520 L 138 gal Tier 4 Final/EU Stage V 72 dB(A) 71 dB(A)
Engine Crankcase 288 L 76 gal Machine Sound Level 119 dB(A) 117 dB(A)
Diesel Exhaust Fluid (DEF) 519 L 137 gal (ISO 6395:2008)
(Tier 4 Final/Stage V) Sound Performance
Transmission 416 L 110 gal • The measurement was conducted at 70 percent of the maximum
Differentials and Final Drives – Front 833 L 220 gal engine cooling fan speed. Hearing protection may be needed when
the machine is operated with a cab that is not properly maintained
Differentials and Final Drives – Rear 757 L 200 gal or when the doors or windows are open for extended periods or in
Hydraulic Tank 1022 L 270 gal a noisy environment.
(implement and hydraulic fan)
Hydraulic Tank (steering and braking) 379 L 100 gal Hydraulic System – Steering
Oil Renewal System (ORS)* 75.7 L 20 gal
Steering System – Circuit Pilot, Load Sensing
*Not available on Tier 4 Final/Stage V machines. Not available in Steering System – Pump Piston, Variable Displacement
all regions.
Maximum Flow @ 1,700 rpm 880 L/min 233 gal/min
Axles Engine Speed
Relief Valve Setting – Steering 31 000 kPa 4,496 psi
Front Fixed Total Steering Angle 80 degrees
Rear Trunnion Steering Cycle Time (low idle) 7.6 seconds
Oscillation Angle 9° Steering Cycle Time (high idle) 4.3 seconds

Brakes
Brakes ISO 3450:2011

3
995 Wheel Loader Specifications

Dimensions
All dimensions are approximate.

16

17

18

11 14 15
1 2 3

13
12
4 9 10

5 7 6
8
Standard Lift High Lift
1 Ground to Top of Rollover Protective Structure (ROPS) 7119 mm 23.4 ft 7119 mm 23.4 ft
2 Ground to Top of Exhaust Stacks 7067 mm 23.2 ft 7067 mm 23.2 ft
3 Ground to Top of Hood 5682 mm 18.6 ft 5682 mm 18.6 ft
4 Ground to Bumper Clearance 1355 mm 4.4 ft 1355 mm 4.4 ft
5 Rear Axle Center Line to Bumper 6205 mm 20.4 ft 6205 mm 20.4 ft
6 Front Axle Center Line to Bucket Tip 6688 mm 21.9 ft 7383 mm 24.2 ft
7 Wheel Base 6800 mm 22.3 ft 6800 mm 22.3 ft
8 Maximum Overall Length 19 693 mm 64.6 ft 20 388 mm 66.9 ft
9 Ground to Lower Hitch Clearance 898 mm 2.9 ft 898 mm 2.9 ft
10 Ground to Center of Axles 1830 mm 6.0 ft 1830 mm 6.0 ft
11 Clearance at Maximum Lift, at 45° Dump 6039 mm 19.8 ft 6896 mm 22.6 ft
12 Rack Back Angle at Ground Level 39.7 degrees 45.0 degrees
13 Rack Back Angle at Carry 47.7 degrees 53.5 degrees
14 B-Pin Height at Maximum Lift 8800 mm 28.8 ft 9657 mm 31.6 ft
15 Maximum Overall Height, Bucket Raised 11 966 mm 39.3 ft 12 823 mm 42.1 ft
16 Rack Angle at Maximum Lift 59.5 degrees 59.4 degrees
17 Dump Angle at Maximum Lift –50.0 degrees –50.0 degrees
18 Reach at Maximum Lift, at 45° Dump 2946 mm 9.6 ft 2884 mm 9.4 ft
Tread Width 4300 mm 14.1 ft 4300 mm 14.1 ft
Width Over Tires (with bulge) 5758 mm 18.8 ft 5760 mm 18.8 ft

Note: Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips.

4
995 Wheel Loader Specifications

Bucket Selection Guide


When sizing the bucket, it is important to consider the Maximum Swung Load. The Maximum Swung Load is the maximum allowed
combined weight of the bucket and payload. Large Wheel Loader Payload Policy is the Maximum Swung Load should never
be exceeded.
“Example Bucket Weight” includes for 21.4-27.5 m3 (28-36 yd3) bucket, 431-0064 Advansys™ 220 HD tips, 375-1666 CapSure™ shrouds,
356-6438 sidebar protectors, and 479-7661 bolt-on cutting edges; for 29.1 m3 (38 yd3) bucket the same as above except with
the mechanically attached adapter system; for 39.8-43.6 m3 (52-57 yd3) coal buckets, 431-0069 Advansys 220 coal tips and
356-6438 sidebar protectors.
If a bucket weight other than the weight specified in the table below is chosen, the bucket size can be evaluated using
the following equations:
Maximum Payload = Maximum Swung Load – Bucket Weight
Maximum Density = (Maximum Swung Load – Bucket Weight)/Bucket Volume
The rated capacity of the tires should always be considered.

Moderate to High Digging Resistance

Standard Lift: Rated Payload 45.4 tonnes (50 tons), Maximum Swung Load 75.9 tonnes (83.7 tons)
Maximum Payload at Maximum Density at
Bucket Volume Example Bucket Weight Example Bucket Weight Example Bucket Weight
m3 yd3 kg lb tonnes tons kg/m3 lb/yd3
21.4 28 23 205 51,144 52.7 58.1 2516 4,241
22.9 30 23 816 52,490 52.1 57.4 2322 3,914
24.5 32 24 352 53,672 51.6 56.9 2155 3,632
26.0 34 25 238 55,625 50.7 55.9 1994 3,361
27.5 36 26 389 58,161 49.5 54.6 1841 3,104
29.1 38 26 911 59,312 49.0 54.0 1727 2,910
39.8 52 23 959 52,806 52.0 57.3 1336 2,252
43.6 57 26 972 59,446 49.0 54.0 1150 1,938

High Lift: Rated Payload 45.4 tonnes (50 tons), Maximum Swung Load 75.9 tonnes (83.7 tons)
Maximum Payload at Maximum Density at
Bucket Volume Example Bucket Weight Example Bucket Weight Example Bucket Weight
m3 yd3 kg lb tonnes tons kg/m3 lb/yd3
21.4 28 23 205 51,144 52.7 58.1 2516 4,241
22.9 30 23 816 52,490 52.1 57.4 2322 3,914
24.5 32 24 352 53,672 51.6 56.9 2155 3,632
26.0 34 25 238 55,625 50.7 55.9 1994 3,361
27.5 36 26 389 58,161 49.5 54.6 1841 3,104
29.1 38 26 911 59,312 49.0 54.0 1727 2,910
39.8 52 23 959 52,806 52.0 57.3 1336 2,252
43.6 57 26 972 59,446 49.0 54.0 1150 1,938

5
995 Wheel Loader Specifications

Low to Moderate Digging Resistance*

Standard Lift: Rated Payload 54.4 tonnes (60 tons), Maximum Swung Load 84.5 tonnes (93.2 tons)
Maximum Payload at Maximum Density at
Bucket Volume Example Bucket Weight Example Bucket Weight Example Bucket Weight
m3 yd3 kg lb tonnes tons kg/m3 lb/yd3
21.4 28 23 205 51,144 61.3 67.6 2516 4,241
22.9 30 23 816 52,490 60.7 66.9 2322 3,914
24.5 32 24 352 53,672 60.2 66.3 2155 3,632
26.0 34 25 238 55,625 59.3 65.4 1994 3,361
27.5 36 26 389 58,161 58.1 64.1 1841 3,104
29.1 38 26 911 59,312 57.6 63.5 1727 2,910
39.8 52 23 959 52,806 60.6 66.8 1336 2,252
43.6 57 26 972 59,446 57.6 63.4 1150 1,938

High Lift: Rated Payload 49.9 tonnes (55 tons), Maximum Swung Load 77.1 tonnes (84.9 tons)
Maximum Payload at Maximum Density at
Bucket Volume Example Bucket Weight Example Bucket Weight Example Bucket Weight
m3 yd3 kg lb tonnes tons kg/m3 lb/yd3
21.4 28 23 205 51,144 53.9 59.4 2516 4,241
22.9 30 23 816 52,490 53.3 58.7 2322 3,914
24.5 32 24 352 53,672 52.7 58.1 2155 3,632
26.0 34 25 238 55,625 51.8 57.1 1994 3,361
27.5 36 26 389 58,161 50.7 55.9 1841 3,104
29.1 38 26 911 59,312 50.2 55.3 1727 2,910
39.8 52 23 959 52,806 53.1 58.5 1336 2,252
43.6 57 26 972 59,446 50.1 55.2 1150 1,938

*Please contact your local dealer to determine if your application is suitable for this increased rated payload.

6
995 Wheel Loader Specifications

Operating Specifications – Standard Lift


For machines equipped with 58/85-57 tires at a static loaded radius of 1830 mm (6 ft).

Bucket Type Rock


Ground Engaging Tools Teeth & Segment
Cutting Edge Type Spade
Bucket Part No. (Group Level) 389-4420 389-4430 389-4440 389-4450 596-5330
Bucket Weight as Configured kg 22 321 23 205 23 816 24 352 25 238
lb 49,209 51,158 52,505 53,687 55,640
Bucket Load at Rated Capacity kg 45 359 45 359 45 359 45 359 45 359
lb 100,000 100,000 100,000 100,000 100,000
Rated Capacity m3 19 21 23 25 26
yd3 25 28 30 32 34
Struck Capacity – ISO* m3 15 18 19 20 21
yd3 20 24 25 26 28
Heaped Capacity – ISO* m3 19 21 23 24 26
yd3 25 28 30 31 34
Bucket Width – Overall mm 6240 6240 6240 6240 6240
in 246 246 246 246 246
Clearance at 45° Dump (Tooth Tip) mm 6356 6246 6175 6108 6039
in 250 246 243 240 238
Reach at 45° Dump (Tooth Tip) mm 2643 2752 2823 2890 2946
in 104 108 111 114 116
Bucket Pin at Maximum Lift mm 8800 8800 8800 8800 8800
in 346 346 346 346 346
Horizontal Arm and Level Bucket Reach mm 5585 5740 5840 5935 6023
in 220 226 230 234 237
Digging Depth (Segment) mm 222 222 222 222 231
in 9 9 9 9 9
Overall Length – Bucket Level Ground mm 19 248 19 403 19 503 19 598 19 693
in 758 764 768 772 775
Front Axle to Bucket Tip Ground mm 6243 6398 6498 6593 6688
in 246 252 256 260 263
Overall Height mm 11 551 11 698 11 781 11 884 11 966
in 455 461 464 468 471
Turning Radius – Corner at SAE Carry mm 13 728 13 772 13 802 13 828 13 860
in 540 542 543 544 546
Reach at 45° Dump and 2.13 m (7 ft) Height (with Teeth) mm 4351 4457 4524 4587 4639
in 171 175 178 181 183
Rack Back Angle at SAE Carry degree 48 48 48 48 48
Full Dump at Maximum Lift degree –50 –50 –50 –50 –50

*Full compliance to ISO 14397-1:2007 Sections 1 through 6, which requires 2% verification between calculations and testing.

(chart continued on next page)

7
995 Wheel Loader Specifications

Operating Specifications – Standard Lift (continued)


For machines equipped with 58/85-57 tires at a static loaded radius of 1830 mm (6 ft).

Bucket Type HD Rock Coal


Ground Engaging Tools Teeth & Segment Teeth & Segment
Cutting Edge Type Spade Straight
Bucket Part No. (Group Level) 592-3680 574-8480 592-3720 577-1190
Bucket Weight as Configured kg 26 389 28 216 23 959 26 972
lb 58,178 62,206 52,820 59,463
Bucket Load at Rated Capacity kg 45 359 45 359 45 359 45 359
lb 100,000 100,000 100,000 100,000
Rated Capacity m3 28 29 40 44
yd3 36 38 52 57
Struck Capacity – ISO* m3 23 24 33 36
yd3 30 31 43 47
Heaped Capacity – ISO* m3 28 29 40 44
yd3 37 38 52 58
Bucket Width – Overall mm 6320 6448 6968 7708
in 249 254 274 303
Clearance at 45° Dump (Tooth Tip) mm 5973 5908 6327 6007
in 235 233 249 236
Reach at 45° Dump (Tooth Tip) mm 3025 3086 2731 2993
in 119 122 108 118
Bucket Pin at Maximum Lift mm 8800 8800 8800 8800
in 346 346 346 346
Horizontal Arm and Level Bucket Reach mm 6126 6215 5668 6079
in 241 245 223 239
Digging Depth (Segment) mm 220 226 224 211
in 9 9 9 8
Overall Length – Bucket Level Ground mm 19 788 19 882 19 332 19 734
in 779 783 761 777
Front Axle to Bucket Tip Ground mm 6783 6877 6327 6729
in 267 271 249 265
Overall Height mm 12 066 12 174 12 270 12 446
in 475 479 483 490
Turning Radius – Corner at SAE Carry mm 13 886 13 967 14 246 14 463
in 547 550 561 569
Reach at 45° Dump and 2.13 m (7 ft) Height (with Teeth) mm 4713 4768 4439 4683
in 186 188 175 184
Rack Back Angle at SAE Carry degree 48 48 48 48
Full Dump at Maximum Lift degree –50 –50 –50 –50

*Full compliance to ISO 14397-1:2007 Sections 1 through 6, which requires 2% verification between calculations and testing.

(chart continued on next page)

8
995 Wheel Loader Specifications

Operating Specifications – Standard Lift (continued)


For machines equipped with 58/85-57 tires at a static loaded radius of 1830 mm (6 ft).

Bucket Type Rock


Ground Engaging Tools Teeth & Segment
Cutting Edge Type Spade
Bucket Part No. (Group Level) 389-4420 389-4430 389-4440 389-4450 596-5330
Bucket Weight as Configured kg 22 321 23 205 23 816 24 352 25 238
lb 49,209 51,158 52,505 53,687 55,640
Bucket Load at Rated Capacity kg 45 359 45 359 45 359 45 359 45 359
lb 100,000 100,000 100,000 100,000 100,000
Rated Capacity m3 19 21 23 25 26
yd3 25 28 30 32 34
Struck Capacity – ISO* m3 15 18 19 20 21
yd3 20 24 25 26 28
Heaped Capacity – ISO* m3 19 21 23 24 26
yd3 25 28 30 31 34
Tipping Load at Operating Weight – Straight kg 161 833 160 196 159 087 158 094 156 542
lb 356,780 353,172 350,726 348,538 345,115
Tipping Load at Operating Weight – Straight** kg 152 401 150 705 149 557 148 527 147 066
lb 335,987 332,248 329,716 327,445 324,224
Tipping Load at Operating Weight – Articulated 40° kg 139 449 137 888 136 828 135 881 134 401
lb 307,433 303,990 301,653 299,567 296,303
Tipping Load at Operating Weight – Articulated 40°** kg 124 474 122 824 121 707 120 705 119 348
lb 274,418 270,780 268,318 266,109 263,117
Tipping Load at Operating Weight – Bucket Level Ground kg 137 390 132 841 129 988 127 380 124 585
lb 302,893 292,864 286,573 280,824 274,662
Tipping Load at Operating Weight – Bucket Level Ground** kg 127 876 123 801 121 232 118 882 116 340
lb 281,919 272,933 267,270 262,089 256,486
Breakout Force – SAE Rated kN 1486 1387 1329 1278 1232
lbf 334,077 311,866 298,792 287,200 276,891
Operating Weight kg 242 275 243 159 243 770 244 306 245 192
lb 534,124 536,073 537,420 538,601 540,555
Weight Distribution at SAE Carry – Front kg 126 626 128 250 129 372 130 363 131 956
lb 279,162 282,743 285,215 287,401 290,914
Weight Distribution at SAE Carry – Rear kg 115 649 114 909 114 398 113 942 113 235
lb 254,962 253,330 252,204 251,200 249,641
Loaded Machine Weight kg 287 634 288 518 289 129 289 665 290 551
lb 634,123 636,072 637,419 638,601 640,554
Weight Distribution at SAE Carry – Front kg 200 582 202 448 203 731 204 876 206 566
lb 442,207 446,321 449,150 451,674 455,399
Weight Distribution at SAE Carry – Rear kg 87 052 86 069 85 397 84 789 83 985
lb 191,916 189,751 188,269 186,927 185,154

**With Tire Squash.

(chart continued on next page)

9
995 Wheel Loader Specifications

Operating Specifications – Standard Lift (continued)


For machines equipped with 58/85-57 tires at a static loaded radius of 1830 mm (6 ft).

Bucket Type HD Rock Coal


Ground Engaging Tools Teeth & Segment Teeth & Segment
Cutting Edge Type Spade Straight
Bucket Part No. (Group Level) 592-3680 574-8480 592-3720 577-1190
Bucket Weight as Configured kg 26 389 28 216 23 959 26 972
lb 58,178 62,206 52,820 59,463
Bucket Load at Rated Capacity kg 45 359 45 359 45 359 45 359
lb 100,000 100,000 100,000 100,000
Rated Capacity m3 28 29 40 44
yd3 36 38 52 57
Struck Capacity – ISO* m3 23 24 33 36
yd3 30 31 43 47
Heaped Capacity – ISO* m3 28 29 40 44
yd3 37 38 52 58
Tipping Load at Operating Weight – Straight kg 155 158 152 643 158 121 157 128
lb 342,064 336,521 348,597 346,408
Tipping Load at Operating Weight – Straight** kg 145 595 143 054 148 182 146 948
lb 320,982 315,381 326,685 323,964
Tipping Load at Operating Weight – Articulated 40° kg 133 022 130 536 136 048 134 732
lb 293,263 287,782 299,935 297,033
Tipping Load at Operating Weight – Articulated 40°** kg 117 848 115 321 120 346 118 708
lb 259,811 254,238 265,316 261,707
Tipping Load at Operating Weight – Bucket Level Ground kg 121 734 118 852 124 936 123 312
lb 268,377 262,024 275,437 271,856
Tipping Load at Operating Weight – Bucket Level Ground** kg 113 691 110 948 116 767 114 989
lb 250,645 244,597 257,427 253,508
Breakout Force – SAE Rated kN 1180 1143 1221 1215
lbf 265,308 257,025 274,584 273,248
Operating Weight kg 246 343 248 170 243 913 246 926
lb 543,092 547,120 537,735 544,377
Weight Distribution at SAE Carry – Front kg 133 983 137 390 129 401 134 512
lb 295,382 302,894 285,280 296,547
Weight Distribution at SAE Carry – Rear kg 112 360 110 779 114 512 112 414
lb 247,710 244,226 252,455 247,831
Loaded Machine Weight kg 291 702 293 529 289 272 292 285
lb 643,091 647,119 637,734 644,377
Weight Distribution at SAE Carry – Front kg 208 692 212 238 204 584 209 205
lb 460,086 467,903 451,029 461,217
Weight Distribution at SAE Carry – Rear kg 83 010 81 291 84 688 83 080
lb 183,006 179,216 186,705 183,159

**With Tire Squash.

10
995 Wheel Loader Specifications

Operating Specifications – High Lift


For machines equipped with 58/85-57 tires at a static loaded radius of 1830 mm (6 ft).

Bucket Type ROCK


Ground Engaging Tools Teeth & Segment
Cutting Edge Type SPADE
Bucket Part No. (Group Level) 389-4420 389-4430 389-4440 389-4450 596-5330
Bucket Weight as Configured kg 22 321 23 205 23 816 24 352 25 238
lb 49,209 51,158 52,505 53,687 55,640
Bucket Load at Rated Capacity kg 45 359 45 359 45 359 45 359 45 359
lb 100,000 100,000 100,000 100,000 100,000
Rated Capacity m3 19 21 23 25 26
yd3 25 28 30 32 34
Struck Capacity – ISO* m3 15 18 19 20 21
yd3 20 24 25 26 28
Heaped Capacity – ISO* m3 19 21 23 24 26
yd3 25 28 30 31 34
Bucket Width – Overall mm 6240 6240 6240 6240 6240
in 246 246 246 246 246
Clearance at 45° Dump (Tooth Tip) mm 7213 7103 7032 6965 6896
in 284 280 277 274 272
Reach at 45° Dump (Tooth Tip) mm 2580 2690 2760 2828 2884
in 102 106 109 111 114
Bucket Pin at Maximum Lift mm 9657 9657 9657 9657 9657
in 380 380 380 380 380
Horizontal Arm and Level Bucket Reach mm 6151 6306 6406 6501 6589
in 242 248 252 256 259
Digging Depth (Segment) mm 229 229 229 229 238
in 9 9 9 9 9
Overall Length – Bucket Level Ground mm 19 943 20 098 20 198 20 293 20 388
in 785 791 795 799 803
Front Axle to Bucket Tip Ground mm 6938 7093 7193 7288 7383
in 273 279 283 287 291
Overall Height mm 12 408 12 555 12 638 12 741 12 823
in 489 494 498 502 505
Turning Radius – Corner at SAE Carry mm 13 976 14 019 14 046 14 072 14 102
in 550 552 553 554 555
Reach at 45° Dump and 2.13 m (7 ft) Height (with Teeth) mm 4917 5023 5091 5154 5206
in 194 198 200 203 205
Rack Back Angle at SAE Carry degree 53 53 53 53 54
Full Dump at Maximum Lift degree –50 –50 –50 –50 –50

*Full compliance to ISO 14397-1:2007 Sections 1 through 6, which requires 2% verification between calculations and testing.

(chart continued on next page)

11
995 Wheel Loader Specifications

Operating Specifications – High Lift (continued)


For machines equipped with 58/85-57 tires at a static loaded radius of 1830 mm (6 ft).

Bucket Type HD Rock Coal


Ground Engaging Tools Teeth & Segment Teeth & Segment
Cutting Edge Type Spade Straight
Bucket Part No. (Group Level) 592-3680 574-8480 592-3720 577-1190
Bucket Weight as Configured kg 26 389 28 216 23 959 26 972
lb 58,178 62,206 52,820 59,463
Bucket Load at Rated Capacity kg 45 359 45 359 45 359 45 359
lb 100,000 100,000 100,000 100,000
Rated Capacity m3 28 29 40 44
yd3 36 38 52 57
Struck Capacity – ISO* m3 23 24 33 36
yd3 30 31 43 47
Heaped Capacity – ISO* m3 28 29 40 44
yd3 37 38 52 58
Bucket Width – Overall mm 6320 6448 6968 7708
in 249 254 274 303
Clearance at 45° Dump (Tooth Tip) mm 6830 6765 7184 6864
in 269 266 283 270
Reach at 45° Dump (Tooth Tip) mm 2963 3024 2669 2931
in 117 119 105 115
Bucket Pin at Maximum Lift mm 9657 9657 9657 9657
in 380 380 380 380
Horizontal Arm and Level Bucket Reach mm 6692 6781 6234 6645
in 263 267 245 262
Digging Depth (Segment) mm 227 233 230 218
in 9 9 9 9
Overall Length – Bucket Level Ground mm 20 483 20 576 20 027 20 430
in 806 810 788 804
Front Axle to Bucket Tip Ground mm 7478 7571 7022 7425
in 294 298 276 292
Overall Height mm 12 923 13 031 13 127 13 303
in 509 513 517 524
Turning Radius – Corner at SAE Carry mm 14 126 14 204 14 477 14 694
in 556 559 570 579
Reach at 45° Dump and 2.13 m (7 ft) Height (with Teeth) mm 5280 5336 5005 5251
in 208 210 197 207
Rack Back Angle at SAE Carry degree 53 54 54 53
Full Dump at Maximum Lift degree –50 –50 –50 –50

*Full compliance to ISO 14397-1:2007 Sections 1 through 6, which requires 2% verification between calculations and testing.

(chart continued on next page)

12
995 Wheel Loader Specifications

Operating Specifications – High Lift (continued)


For machines equipped with 58/85-57 tires at a static loaded radius of 1830 mm (6 ft).

Bucket Type Rock


Ground Engaging Tools Teeth & Segment
Cutting Edge Type Spade
Bucket Part No. (Group Level) 389-4420 389-4430 389-4440 389-4450 596-5330
Bucket Weight as Configured kg 22 321 23 205 23 816 24 352 25 238
lb 49,209 51,158 52,505 53,687 55,640
Bucket Load at Rated Capacity kg 45 359 45 359 45 359 45 359 45 359
lb 100,000 100,000 100,000 100,000 100,000
Rated Capacity m3 19 21 23 25 26
yd3 25 28 30 32 34
Struck Capacity – ISO* m3 15 18 19 20 21
yd3 20 24 25 26 28
Heaped Capacity – ISO* m3 19 21 23 24 26
yd3 25 28 30 31 34
Tipping Load at Operating Weight – Straight kg 141 587 140 165 139 196 138 335 136 893
lb 312,146 309,010 306,874 304,976 301,796
Tipping Load at Operating Weight – Straight** kg 134 008 132 526 131 519 130 620 129 246
lb 295,437 292,170 289,949 287,968 284,938
Tipping Load at Operating Weight – Articulated 40° kg 121 422 120 050 119 115 118 285 116 904
lb 267,690 264,665 262,603 260,774 257,729
Tipping Load at Operating Weight – Articulated 40°** kg 108 940 107 478 106 485 105 598 104 312
lb 240,171 236,949 234,759 232,804 229,968
Tipping Load at Operating Weight – Bucket Level Ground kg 118 752 115 026 112 670 110 516 108 162
lb 261,804 253,588 248,395 243,645 238,457
Tipping Load at Operating Weight – Bucket Level Ground** kg 111 603 108 186 106 018 104 034 101 848
lb 246,041 238,509 233,729 229,356 224,536
Breakout Force – SAE Rated kN 1416 1322 1266 1217 1173
lbf 318,430 297,153 284,624 273,514 263,619
Operating Weight kg 244 045 244 929 245 540 246 076 246 962
lb 538,026 539,975 541,322 542,504 544,457
Weight Distribution at SAE Carry – Front kg 131 917 133 602 134 766 135 792 137 450
lb 290,826 294,542 297,108 299,369 303,025
Weight Distribution at SAE Carry – Rear kg 112 128 111 327 110 774 110 284 109 512
lb 247,200 245,433 244,214 243,135 241,432
Loaded Machine Weight kg 289 404 290 288 290 899 291 435 292 321
lb 638,025 639,974 641,321 642,503 644,456
Weight Distribution at SAE Carry – Front kg 209 797 211 666 212 953 214 095 215 861
lb 462,523 466,644 469,480 471,998 475,891
Weight Distribution at SAE Carry – Rear kg 79 607 78 621 77 946 77 340 76 460
lb 175,502 173,330 171,841 170,505 168,565

* With Tire Squash.

(chart continued on next page)

13
995 Wheel Loader Specifications

Operating Specifications – High Lift (continued)


For machines equipped with 58/85-57 tires at a static loaded radius of 1830 mm (6 ft).

Bucket Type HD Rock Coal


Ground Engaging Tools Teeth & Segment Teeth & Segment
Cutting Edge Type Spade Straight
Bucket Part No. (Group Level) 592-3680 574-8480 592-3720 577-1190
Bucket Weight as Configured kg 26 389 28 216 23 959 26 972
lb 58,178 62,206 52,820 59,463
Bucket Load at Rated Capacity kg 45 359 45 359 45 359 45 359
lb 100,000 100,000 100,000 100,000
Rated Capacity m3 28 29 40 44
yd3 36 38 52 57
Struck Capacity – ISO* m3 23 24 33 36
yd3 30 31 43 47
Heaped Capacity – ISO* m3 28 29 40 44
yd3 37 38 52 58
Tipping Load at Operating Weight – Straight kg 135 596 133 218 138 776 137 316
lb 298,937 293,695 305,949 302,729
Tipping Load at Operating Weight – Straight** kg 127 875 125 469 130 733 129 107
lb 281,916 276,612 288,217 284,631
Tipping Load at Operating Weight – Articulated 40° kg 115 603 113 242 118 805 117 082
lb 254,861 249,655 261,921 258,122
Tipping Load at Operating Weight – Articulated 40°** kg 102 904 100 499 105 638 103 686
lb 226,864 221,562 232,891 228,588
Tipping Load at Operating Weight – Bucket Level Ground kg 105 680 103 041 108 650 106 770
lb 232,984 227,166 239,532 235,387
Tipping Load at Operating Weight – Bucket Level Ground** kg 99 501 96 954 102 389 100 406
lb 219,363 213,747 225,728 221,358
Breakout Force – SAE Rated kN 1123 1087 1163 1156
lbf 252,495 244,427 261,451 259,991
Operating Weight kg 248 113 249 940 245 683 248 696
lb 546,994 551,022 541,637 548,280
Weight Distribution at SAE Carry – Front kg 139 570 143 110 134 729 140 097
lb 307,698 315,502 297,026 308,860
Weight Distribution at SAE Carry – Rear kg 108 543 106 830 110 954 108 599
lb 239,296 235,520 244,611 239,420
Loaded Machine Weight kg 293 472 295 299 291 042 294 055
lb 646,994 651,022 641,637 648,279
Weight Distribution at SAE Carry – Front kg 218 037 221 680 213 492 218 382
lb 480,689 488,720 470,669 481,450
Weight Distribution at SAE Carry – Rear kg 75 434 73 619 77 550 75 673
lb 166,304 162,301 170,968 166,829

*With Tire Squash.

14
995 Standard and Optional Equipment

Standard and Optional Equipment


Standard and optional equipment may vary. Consult your Cat® dealer for details.

Standard Optional Standard Optional


POWER TRAIN OPERATOR ENVIRONMENT
Engine, 3516E High Displacement (HD)  Premium seat with heated and actively 
Mechanical Electronic Unit Injector cooled leather, adjustable lumbar
(MEUI™-A), Air-to-Air Aftercooling support, air adjustable bolsters on
(ATAAC) diesel, turbocharged/aftercooled the seat and backrest, seat cushion
Engine prelube  tilt adjustment and two-way thigh
support adjustment
Fuel priming pump (electric) 
Bonded glass, tinted 
Ground-level engine shutoff 
Rubber-mounted, high-impact 
Engine air intake (above hood) precleaner  resistant solar control glass
Aluminum Modular Radiator (AMR)  Trainer seat 
Automatic, ether starting aid  Trainer seat with suspension 
Electronic throttle lock  Dual-lever lift and tilt function controls 
Impeller Clutch Torque Converter  Joystick lift and tilt function controls 
(ICTC) with Lock-Up Clutch and
rimpull control system Implement kickouts 
Rimpull control system  Air conditioner 
Planetary powershift, 3F/3R electronic  Cab pressure indicator 
control transmission Graphical touchscreen information 
Oil Renewal System (ORS)*  display conveys real-time
(for increased time between oil changes) operating information
Delayed engine shutdown  Heater, defroster, auto 
temperature controls
Oil-cooled, multi-disc, service brakes 
Gauge instrumentation with 
Electro-hydraulic parking brake  configurable widgets:
LINKAGE – Status indicators
Standard lift  – Wheel rev counter
High lift – Simplified payload

– Tire pressure monitoring system
ELECTRICAL (optional)
Alternator  – Bucket angle
Batteries, low maintenance  – Coolant temperature
– Hydraulic oil temperature
10/15 amp, 24V to 12V converter 
– Fuel level
Disconnect switch to bumper  – Power train oil temperature
LED warning lights (pattern selectable)  – Engine speed (tachometer)
LED lighting system (working lights, – Transmission gear

access and service platform lights, – Ground speed
turn signals/hazard lights) – Engine hour meter
Emergency jump-start receptacle  (continued on next page)
Starter and transmission lockout 
in bumper
24V starting and charging system 
Electric starters 

*Not available in all regions.

15
995 Standard and Optional Equipment

Standard and Optional Equipment (continued)


Standard and optional equipment may vary. Consult your Cat dealer for details.

Standard Optional Standard Optional


OPERATOR ENVIRONMENT (continued) SAFETY
Powered cab precleaner  Ground-access ladders 
Operator presence status  Powered ground-access stairs 
Starting/charging system malfunction  Rear-vision camera 
Electronic OMM  Cat Detect (Rear Object Detection) 
Operator controls help  Front frame access with steps 
Bluetooth®-enabled machine security  Front walkway around cab 
Two USB charging ports  Pump bay access ladders with T-handle 
CB mounting, 12V/24V power  and platform
and antenna Tie-offs on ROPS and radiator guards 
14-pin service port  Steering frame lock 
12V power  Wheel chocks 
Selectable application profiles  Stairways on both sides of the machine 
Entertainment radio mute  LED stairway and access lights 
Push-To-Start (PTS)  Toe kicks 
Warning/indicator instrumentation  Electric (field and shop) horns 
Keypad control with indicator lights  Retractable seatbelt, 76 mm (3 in) wide 
Dome light in cab  Trainer seat with lap belt, 
Lunchbox and beverage holders  76 mm (3 in) wide
Electro-hydraulic force feedback steering  Back-up alarm 
Sun screen, pull down (front and rear)  Secondary steering 
Vital Information Management System  COLD WEATHER
(VIMS™) with information display: Cold-weather cooling fan bypass 
external data port, cycle timer (recommended for temperatures below
AM/FM/AUX radio  –29° C [–20° F])
AM/FM/AUX/USB/BT/CD/SAT radio Heavy-duty starter (provides an 

additional electric starter motor and
Coat hook  two additional batteries for a total of
three starter motors and six batteries)
(recommended for temperatures below
0° C [32° F])
240V engine oil and coolant heating 
elements (recommended in conditions
from –18° C to –30° C [0° F to –22° F])
Fuel heater (heated by recirculation 
using engine heat and a heat exchanger)
(recommended in conditions from
–18° C to –30° C [0° F to –22° F])
Heated mirrors (recommended for below- 
freezing temperatures)
(continued on next page)

16
995 Standard and Optional Equipment

Standard and Optional Equipment (continued)


Standard and optional equipment may vary. Consult your Cat dealer for details.

Standard Optional Standard Optional


MACHINE CONTROL AND GUIDANCE SERVICE
Cat Payload with Overload Prevention  Ground-level service center including: 
MineStar™ Health ready  – Service center light
MineStar GUIDE ready – Implement and cooling fan oil level
MineStar Edge ready indicator
– Steering and brake oil level indicator
New Autodig Components: 
– Window washer solvent level indicator
– Tire slip prevention
– Transmission oil level indicator
– Lift stall prevention
– DEF level indicator (if equipped)
– Tire set
– Fuel level indicator
Operator coaching  – Engine oil level indicator
FUEL TANK – Engine coolant level indicator
12 hour (3240 L/856 gal)  – Automatic lubrication system grease
tank level indicator
24 hour (5350 L/1,414 gal)  – DEF purge indicator lamp
COOLING – Transmission lockout and LED
Standard ambient package  – Starter lockout and LED
(recommended for site conditions that – Heavy-duty battery disconnect switch
do not exceed 43° C [110° F]) – Stairway light switch
High ambient package (recommended – Service lighting switch (if equipped)

for site conditions that do not exceed – Fuel shutoff engine shutdown switch
53° C [127° F]) – Engine oil fast-fill port
– Transmission oil fast-fill port
RIMS AND TIRES – Steering and brake hydraulic oil
Rims – 1194 mm (47") (47 × 57)  fast-fill port
152 mm (6") flange – Steering and brake hydraulic oil
For use with 58/85-57 drain port
84PR L4 tires – Oil renewal system fast-fill port
Rims – 1194 mm (47") (47 × 57)  (if equipped)
127 mm (5") flange – Engine coolant fast-fill port
For use with 60/80 R57 – DEF fill port (HRC only)
L5R XMine D2 SR tires – Implement and cooling fan hydraulic
Tires – 58/85-57 84PR L4 oil fast-fill port

(require 47" rims) – Implement and cooling hydraulic oil
drain port
SPARE RIMS – Automatic lubrication system grease
1194 mm (47") 152 mm (44 × 57)  tank fill port
(6") flange – 24V jump-start receptacle
1194 mm (47") 127 mm (47 × 57)  – 240V jacket water and engine oil heater
(5") flange plug (if equipped)
– 12V power port
– VIMS key switch
– 14-pin machine data port
(continued on next page)

17
995 Standard and Optional Equipment

Standard and Optional Equipment (continued)


Standard and optional equipment may vary. Consult your Cat dealer for details.

Standard Optional Standard Optional


SERVICE (continued) SERVICE (continued)
In-tank mounted cartridge-type case  Premixed 50% concentration of 
drain filters with in-line magnetic plugs extended-life coolant with freeze
on implement, cooling fan, brake and protection to –34° C (–29° F)
steering pumps Rear access to cab and service platform 
High-pressure screens on the output side  Load-sensing steering 
of implement, cooling fan, brake and
Supplemental steering system 
steering pumps
Pump efficiency monitoring Vandalism protection caplocks 

Automatic lubrication system greases Cooling cleanout service package 

the linkage, hitch, steering and axle VIMS download and Cat Electronic 
trunnion bearings Technician service port in bumper
Electronic pressure control of the  Product Link™ satellite 
automatic lubrication system eliminates Product Link cellular 
pressure adjustment and monitors grease
Product Link (dual mode – 
thickness for temperature compatibility
satellite/cellular)
Rock guards on linkage grease lines 
Service lights (engine bay, service center) 
Cat O-ring face seal couplings 
Additional service lights (pump bay, 
Lockable service access doors  front frame and bumper)
Ecology drains for engine, radiator,  EH steering eliminates need 
hydraulic tank, steering and brake tank, for neutralizer adjustment
brake cooling tank and axles
EFFICIENCY
High-speed engine oil change system  On demand throttle, HP Plus, 
Ground-level fast-fill fuel system  and Enhanced ECO Modes
Transmission guard  Variable displacement implement pumps 
Drawbar hitch with pin  Variable displacement load sensing 
Cat XT™ hoses  steering
Left-side service center  Variable displacement cooling fan pump 
Oil sampling valves  Torque converter lock-up clutch 
Automatic Autolube filling shutoff valve  SOUND
Telematics and Cat Electronic Technician  Sound-suppression package 
service port in bumper
Air filter remaining useful life sensor 

For more complete information on Cat products, dealer services, and industry solutions, visit us on the web AEXQ3526 (10-2022)
at www.cat.com Build Number: 12A
(Global)
© 2022 Caterpillar
All rights reserved

Materials and specifications are subject to change without notice. Featured machines in photos may include
additional equipment. See your Cat dealer for available options.

CAT, CATERPILLAR, LET’S DO THE WORK, their respective logos, “Caterpillar Corporate Yellow,” the
“Power Edge” and Cat “Modern Hex” trade dress as well as corporate and product identity used herein,
are trademarks of Caterpillar and may not be used without permission.

You might also like