Scribd
Upload
14 views4 pages

Project

Uploaded by

muraldharan911
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
14 views4 pages

Project

Uploaded by

muraldharan911
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
You are on page 1/ 4
Introduction Fire fighter robot can be used to control the fire. this robot can detect the fire by itself and control the fire by throwing water. there are some sensors we are using that can detect fire and robots can move there to fire extinguish.The fire fighting robot has the same structure as Bluetooth control RC car. the robot has 3 sensors 1 sensor at the front side which see if there is anything in front of the robot and the other two at the both front corner which also searches for fire. if any sensor detects fire at any site the robot will sensor and move towards it. the fire fighting robot has 4 wheels, 3 sensors, one water tank, one nozzle, and a computer which help him to take decision according to the Arduino code, Fire Fighter Robot using Arduino | Fire fighting Robot December 30, 2022 by Admin Hey, guys welcome back to Techatronic. I think all you have heard about the fire fighting Vehicle. This time we are going to make an advanced fire fighting vehicle which is also a robot and we called it a Fire fighter Robot. It is simply a machine that works automatically that's why we called it a robot. We made this robot like it will go near to the fire and start its work. The fire fighter robot is very impressive and can be used in place of a vehicle. Now a days if any fire accidents happens in Power plants, Buildings, etc., the time and consumption of human power is high. So there may be a possibility of Heavy damage to human beings Ee a The robot is a small version till the date post published and there is only some basic feature when you will start the robot it will move forward first until it gets fired anywhere. if any sensor of the robot will find the flame anywhere it will start moving toward the flame and with the help of the water nozzle of the fire fighting robot using Arduino will start watering the particular area. Fire fighter robot and line follower robot have the same sensor but the working in both conditions are different. To make this Fire fighter robot using Aruino | am going to upload all the required detail to make this robot. Components required a code circuit and all the instructions. so, you can make this easily only you need to follow all the steps. If you want to learn some basic you can learn it from our website. Components Required * Arduino Uno * flame IR Sensor * Robot Chassis * 12v Battery + Wires * Nozzle for water * Water pump Sv * Single channel relay Circuit Diagram Make all the connection as the given in the circuit diagram. After completing the Connection next step is to write the code and program for our project.

You might also like