Final Drawing

Shipyard:SPP PLANT AND SHIPBUILDING CO.LTD

Hull NO.:H4079

Model Dragon 26 T

FRP Totally Enclosed Lifeboat

Fassmer-Marland Ltd.
Hong Kong Office:
Room 702, Fortress Tower
250 King’s Road, North Point, HKSAR
+852-2571 9322
¬ +852-2806 3153
| [email protected]
ß www.fassmer-marland.hk

ZhongShan Factory:
Xi Er Wei, Hengmen, Hi-Tech Torch
Development Zone, ZhongShan City,
Guangdong Province, China 528437
+86 760 8528 1028
¬ +86 760 8528 1022

Approved by
Checked by
Drawn by
Date
Dragon 26 T Totally Enclosed Lifeboat
Specification & Drawings
 Specification for Lifeboat Dragon 26 T

Specification no.:
for Boat type: Dragon 26 T
SPP PLANT AND SHIPBUILDING
Customer :
CO.LTD
Project / Hull no.: H4079
FMC Order / Project no.:
Date: Aug,07,2012
Modification: 0
Prepared by: James Qian

Main Particulars
DRAGON 26 DRAGON 32 DRAGON 38
Length 5,48 m 5,91 m 6,77 m
Breadth 2,20 m 2,20 m 2,20 m
Height 2,51 m 2,51 m 2,51 m
Certified for persons: 26 30
(Persons max. possible) 26 32 38
Totally enclosed Lifeboat
DRAGON C for Cargo 2.150 kg 2.250 kg 2.450 kg
(1)
Vessels

 Totally enclosed Lifeboat

(c/w water spray and air 2.400 kg 2.550 kg 2.750 kg
system) DRAGON T for
Tanker Vessels (1)
Hook Distance 5,26 m 5,69 m 6,55 m

Standard weight for boat w/o persons: 2400 kg

Persons : 2145 kg
Full load : 4545 kg

Boat Number: No.1 stb’d side lifeboat

No.2 port side life/rescue boat

Hong Kong Office China Factory

Tel. +852 2571 9322 Tel. +86 760 528 1028
Fax +852 2806 3153 Fax +86 760 528 1022
Email: [email protected] Internet: www.fassmer-marland.hk

1/6
 Specification for Lifeboat Dragon 26 T

Options and special execution: Standard boat weight: 2400 kg

 027 Certification 0 kg
Each boat to be delivered with Certificate of Conformity with EC-
Directive 96/98/EC as amended by Directive 98/85/EC as Freefall-
Lifeboat according SOLAS LSA-Code together with EC-Type
Examination Certificate, issued by See-Berufsgenossenschaft (EC-
Notified Body no. 0736) and with certification for hoisting wires.
This certification is mandatory for ALL vessels with flag of EC-Member
states, Norway, Iceland, Bermuda, Cayman Islands, Gibraltar and Isle of
Man and further accepted by several other administration.

 057 On-Board-Testing: 0 kg
Not included - to be ordered separately

 407 Lettering 0 kg
Language of Instructions for using boat, engine and release device:
English

 501 Engine 0 kg
Type Nanni 3.30 (21.3 kW / 29 hp)

 732 Battery charging 0 kg

Automatic battery charger to be installed on the lifeboat. An AC current
of 42V has to be led to the self-disconnecting charging plug installed at
the forward end of the aft canopy to the ship's side, completely delivered
with counter part.
A 12V generator is installed for charging the batteries and feeding the
consumers during the boat service.

 914 Loose Equipment 0 kg

Following parts with expiry date are included in Fassmer supply:
1 set emergency signals:
4 rocket parachute flares
6 hand flares
2 buoyant smoke signals
1 food ration per person

Total contract boat weight: 2400 = kg

2/6
 Specification for Lifeboat Dragon 26 T

FRP construction of hull, inner liner and canopy

All major FRP parts of the boat are manufactured in hand-lay-up-method without use of sandwich
materials. The components are laminated with glass mats and rovings by use of fire retardant
polyester resin. The outside surface is made from isophtalic gelcoat.
All required areas are strengthened by laminated girders, all fitting areas are reinforced by metal
backplates.
Air cases formed by hull and hull inner liner are filled with polyurethane foam, increasing the
strength of the structure and providing safety against sinking of the boat even when the hull has
been heavily damaged. Air cases formed by canopy and canopy inner liner guarantee self righting
also in damaged condition or with open hatches.

Doors, hatches and windows

One FRP door are arranged on the boat.
One forward and one aft hatch are provided as emergency escape and for access to the hoisting
hooks. The hatches are made from FRP with translucent areas, they have a securing device for
the open position and a clear opening of min. 600x600mm.
Front, side and rear windows are installed in the helmsman dome, providing good view to all
around.

Seats
The seats are mainly integrated in the hull inner liner. Each seat position is marked and equipped
with seat belts and head cushions.

Inventory box
The inventory is stowed in two boxes arranged below forward seats. Easy access is provided
through watertight hatches. Water rations are stowed in water canisters, each one canister of 30
liters is provided for 10 persons. These canisters will not be damaged if the water is frozen. They
are stowed and secured separately in the aft area of the boat.

Hoisting hooks
The boats are equipped with Fassmer Duplex hoisting hooks made from stainless steel and
special brass.
A central release device with hydrostatic interlock is fitted at the helmsman position.
The hooks can only be released when the boat is waterborne by means of a water-pressure
activated securing device. In emergency cases, however, the hooks can also be released under
load by breaking a safety glass and removing a securing pin. (Onload/offload release device
according to SOLAS 83, Chapter III, Reg. 41.7.6)
After release the hooks return automatically to their closed position. Simply by returning the
release lever into resting position, the hooks are secured again for hoisting back into the Davits.
The hoisting hooks have additional eyes for transportation of the boat or for use of hanging-off
pendant. An outlet for davit brake wire is provided near helmsman position.

Hoisting anchors
The outside fitted parts of forward and aft hoisting anchor are made of stainless steel. The interior
mounted parts are made of galvanized steel.

3/6
 Specification for Lifeboat Dragon 26 T

Skates
Elastic fenders with sliding skates are provided at the ships side of the boat providing good
protection of the crew during impacts against the shipside.
As the fender system is arranged above the water line it can be permanently installed.

Colours
Colour outside: canopy = orange RAL 3031 hull = orange RAL 3031
Colour inside: canopy = grey RAL 7035 flooring = grey RAL 7035

Lettering and marking

The ships name, home port and boat number are marked on the canopy on both sides. The call
sign is marked on top of the canopy to be seen from above.
Operating instructions for boat, engine and release device are fitted inside the boat. All important
items are provided with pictograms easily to be understood and additional English description.

Propulsion
A water-cooled boat diesel engine with reverse and reduction gear is installed. A minimum speed
of 6 knots also with engaged spray system is guaranteed.
Engine starting is managed electrically, using two independent batteries. A 12V generator is
charging the batteries and feeding the consumers during the boat service.
The engine control is done by single lever operation from the helmsman position. The engine
switch board is placed at helmsman position including starter, temperature- and oil-pressure-alarm.
A stainless steel shafting is provided which can run dry 5 minutes when boat is hanging in the
davits. A brass propeller in a special execution is fitted to run in a rudder nozzle.
The fuel tank has sufficient capacity for 25 working hours at 6 knots. It is fitted with filling stud,
inspection cover and fuel valve.
One closed cooling circuit is arranged with keel-cooling-pipes. The cooling system is filled with
anti-freezer – so no system drainage is necessary at low temperatures.
An exhaust system is provided behind the engine to reduce the noise level. The exhaust piping is
heat protected, the outlet is having a goose neck to the transom.
The rudder nozzle with integrated rudder-blade is operated by a bowden wire steering. The rudder
nozzle protects the propeller against impacts while rudder and propeller are protected by a rudder
shoe. An emergency tiller can be easily inserted into the tiller fitting.

Electric system
The electric system is of single wire type at 12V DC. Two gel-type batteries are provided, capacity
60 Ah each, together with battery selection switch. A central switchboard is installed at helmsman
position with fuses, switches and plug for searchlights.
One approved lifeboat light is installed on top of the canopy, inside two water sheltered lights are
providing sufficient illumination.

4/6
 Specification for Lifeboat Dragon 26 T

Compass, Radar reflector

An approved compass is installed at helmsman position provided with lightening.
A fitting for mounting of radar reflector (part of loose inventory) is provided.

Reflective material
Reflective strips are fitted on the canopy to be seen from top and from the sides.

Deck equipment
One hand operated screen wiper is provided. Nylon rope lifelines are fitted at the boat sides and
the transom. For rainwater collecting buckets are included in loose equipment. One towing eye for
life rafts is integrated in the aft hoisting hook. A painter fitting is placed at fore-ship to release the
painter from inside.

Bailing, drain plug

A manual bailing pump is installed with hoses and outlet.
One automatic drain plug with two stoppers is installed at the deepest point of the hull.

Davit lashing
For lashing the lifeboat to the Davit lashings are provided at the stern and at the bow.

Loose equipment
Standard equipment delivered with the boat. Alterations are possible, depending on authority.

SART fittings (shipyard supply)

Refer to shipyard supply drawings.
Radar transponder bracket is provided for SART fittings.(see the GA drawing)

5/6
 Specification for Lifeboat Dragon 26 T

 Special features for totally enclosed lifeboat Dragon T for Tanker

Vessels only c/w Water spray and air plant acc. SOLAS-LSA-Code,
Reg. 4.8 and 4.9:

Water spray plant

For the boat driving through oil fires a water spray plant is provided covering the whole outside
surface with a water film preventing burning of the boat and providing cooling effect for
passengers.
For water coverage a sprinkler pump is permanently attached to the engine. System is set into
operation by opening sea water inlet valve. Pump provided for permanent dry running .
Water will be distributed by inside pipe work to special spray nozzles all around the canopy
providing a closed water film around the canopy and also running down the hull. Thereby
installation of nozzles in the hull which could be damaged during launching and re-insetting is not
necessary.
A connection for flushing the whole system with fresh water is provided, delivered together with
counter piece suitable for flushing hose.10m Flushing hose between ship’s water source and lifeboat is
part of Fassmer supply.

Breathing air plant

An independent air supply is provided by three air bottles at 160 bar / 16 MPa.
Bottles are installed in the side benches. Access to bottle valves provided.
Complete control unit with stop valve, high and low pressure manometers, high quality air reducer
and air outlet is provided in the near of helmsman position. Filling connection 5/8” female thread
also provided in this unit for re-charging of air bottles.
A breathing air compressor and a filling hose should be on board of the ship to refill the air plant.

Compressor, filling hose, and safety valve are not part of Fassmerś delivery. Over- and under-
pressure compensation devices are integrated into the air-duct of the aft entrance door to prevent
dangerous low or high pressures inside the boat.

6/6
 Fassmer-Marland Ltd

Life boat(NO.1) Equipment List Hull No.H4079

G23-00

ITEM NAME Illustration Material QTY/ Boat Part Nr. REMARK

1 Buoyant oar Wooden 2 G23-01

2 Boat Hook Al 2 G23-02

3 Buoyant Bailer Plastic 1 G23-03 with lanyard

22 Liter
4 Bucket Plastic 2 G23-04
with lanyard

5 Compass Plastic 1 G23-05 Fitted inside of boat

with 15m rope

6 Sea anchor Canvas 1 G23-06
65x75

Polypropylene Dia 16mm

7 Painter 2 G23-07
Rope 30mX1,50mX1

8 Hatchet Forged steel 2 G23-08 with lanyard

3 litres/
9 Fresh Water -- G23-09 156 packs
person

10 Dipper SUS 1 G23-10 with chain

11 Drinking Cup Plastic 1 G23-11

1 set/ Approved type

12 Food Ration -- G23-12
person 26 persons

1
 Fassmer-Marland Ltd

ITEM NAME Illustration Material QTY/ Boat Part Nr. REMARK

Waterproof
13 Plastic 1 G23-13 One spare battery/bulb
Electric Torch

14 Rocket Parachute Flare -- 4 G23-14 Approved type

15 Hand Flare -- 6 G23-15 Approved type

16 Buoyant Smoke Signal -- 2 G23-16 Approved type

Daylight Signaling
17 -- 1 G23-17 Approved type
Mirror

18 Whistle Plastic 1 G23-18 with lanyard

19 First-aid Outfit -- 1 G23-19 Approved type

20 Jack Knife SUS 1 G23-20 with lanyard

21 Can Openers -- 3 G23-21

Rubber/
22 Buoyant Rescue Quoit Polypropylene 2 G23-22 With 30m buoyant line
rope
Fitted inside of boat
23 Manual bailing Pump Plastic 1 G23-23 One spare rubber
diaphragm

24 Fishing Tackle -- 1 G23-24

Portable Fire Approved type

25 Steel 1 G23-25
Extinguisher Fitted inside of boat

Approved type
26 Search Light Rubber 1 G23-26
Fitted inside of boat

27 Thermal protective aids Polycarbonate 3 G23-27 Approved type

Anti-Seasickness 6 doses/
28 -- G23-28 156 doses
Medicine person
 Fassmer-Marland Ltd

ITEM NAME Illustration Material QTY/ Boat Part Nr. REMARK

29 Life-Saving Signal Table Paper 1 Sheet G23-29 Waterproof

Rope Ladder For

30 Embarking Plastic 1 G23-30

Tool set for engine with

31 Box -- 1 G23-31 See detail inside of box

1 set/ Fitted
32 Safety Belt -- G23-32
person 26 persons

1 pce/
33 Seasickness Bag Plastic G23-33 26 persons
person

Approved type
Polypropylene
34 Radar Reflector 1 set G23-34 with Erect Pole
/ wood
and Socket

35 Survival Manual Paper 1 G23-35

Rain Water Collection

36 Plastic 1 G23-36 15 Liter
Tank

Fitted inside of boat

37 Battery charger -- 1 G23-37 Input 42V
Output 12V

38 Charging cable w/plug -- 1 G23-38 30m cable w/plug

39 Transformer -- 1 G23-39 AC220V / 42V

3
 Fassmer-Marland Ltd

Life/Rescue boat(NO.2) Equipment List Hull No.H4079

G23-00

ITEM NAME Illustration Material QTY/ Boat Part Nr. REMARK

1 Buoyant oar Wood 2 G23-01

2 Boat Hook Al 2 G23-02

3 Buoyant Bailer Plastic 1 G23-03 with lanyard

22 Liter
4 Bucket Plastic 2 G23-04
with lanyard

5 Compass Plastic 1 G23-05 Fitted inside of boat

with 15m rope

6 Sea anchor Canvas 1 G23-06
65x75

Polypropylene Dia 16mm

7 Painter 2 G23-07
Rope 30mX1,50mX1

Polypropylene Dia 16mm

7.1 Towing Line 1 G23-07
Rope 50m in length

8 Hatchet Forged steel 2 G23-08 with lanyard

3 litres/
9 Fresh Water -- G23-09 156 packs
person

10 Dipper SUS 1 G23-10 with chain

11 Drinking Cup Plastic 1 G23-11

1 set/ Approved type

12 Food Ration -- G23-12
person 26 persons
 Fassmer-Marland Ltd

ITEM NAME Illustration Material QTY/ Boat Part Nr. REMARK

Waterproof
13 Plastic 1 G23-13 One spare battery/bulb
Electric Torch

14 Rocket Parachute Flare -- 4 G23-14 Approved type

15 Hand Flare -- 6 G23-15 Approved type

16 Buoyant Smoke Signal -- 2 G23-16 Approved type

Daylight Signaling
17 -- 1 G23-17 Approved type
Mirror

18 Whistle Plastic 1 G23-18

19 First-aid Outfit -- 1 G23-19 Approved type

Jack Knife
20 SUS 1 G23-20
with lanyard

21 Can Openers -- 3 G23-21

Rubber/
22 Buoyant Rescue Quoit Polypropylene 2 G23-22 With 30m buoyant line
rope
Fitted inside of boat
23 Manual bailing Pump Plastic 1 G23-23 One spare rubber
diaphragm

24 Fishing Tackle -- 1 G23-24

Portable Fire Approved type

25 Steel 1 G23-25
Extinguisher Fitted inside of boat

Approved type
26 Search Light Rubber 1 G23-26
Fitted inside of boat

27 Thermal protective aids Polycarbonate 3 G23-27 Approved type

 Fassmer-Marland Ltd

ITEM NAME Illustration Material QTY/ Boat Part Nr. REMARK

Anti-Seasickness 6 doses/
28 -- G23-28 156 doses
Medicine person

29 Life-Saving Signal Table Paper 1 Sheet G23-29 Waterproof

Rope Ladder For

30 Embarking Plastic 1 G23-30

Tool set for engine with

31 Box -- 1 G23-31 See detail inside of box

1 set/ Fitted
32 Safety Belt -- G23-32
person 26 persons

1 pce/
33 Seasickness Bag Plastic G23-33 26 persons
person

Approved type
Polypropylene
34 Radar Reflector 1 set G23-34 with Erect Pole
/ wood
and Socket

35 Survival Manual Paper 1 G23-35

Rain Water Collection

36 Plastic 1 G23-36 15 Liter
Tank

Fitte inside of boat

37 Battery charger -- 1 G23-37 Input 42V
Output 12V

38 Charging cable w/plug -- 1 G23-38 30m cable w/plug

39 Transformer -- 1 G23-39 AC220V / 42V

 Nanni 3.30KC Engine specifications
Cycle 4 strokes Diesel
Number of cylinders/Arrangement 3 in line
Bore/Stroke 76mm×73.6mm
Displacement 1.001litres
Compression rate 23:1
Direction of rotaion(from flywheel) Counter clockwise
Weight dry with gearbox 130kg
Max. power 21.3kW(29hp)
Rated rpm speed 3600rpm
Idle 950rpm
No load rpm speed 3900rpm
Specific fuel consumption 190g/kW/h
Fuel supply
Injection order 1-3-2
Advance injection timing 22º+1ºbefore UDC
Injection pump Nippon Denso(Bosch type)
Injection pressure 140bar
Lubrication
Engine oil API CD-SAE 15W 40(temperate climate)
Engine oil capacity 4.5 to5.5 liters depending on the Inclination of the engine
Cooling
Cooling By fresh water/sea water heat exchanger
Seawater pump Neoprene rotor type
Coolant for heat exchanger version Around 4 liters,50% water +50% mixture of antifreeze and anticorrosion agents
Electrical system
Alternator 12V/60A
Battery capacity(min.)  A/h
These specifications are for marine pleasure only. The recommended cruise speed is 200rpm
below rated RPM speed
For more information concerning your transmission, At engine flywheel according to ISO
8665-1
Refer to its specific manual.
NANNI 3.30KC diesel engine spare part and tools list:
item description quantify picture

1 Polygrip tong 1 pc

2 Hand pump for lube oil 1 pc

3 Double fork spanner 10/11 1 pc

4 Double fork spanner 12/13 1 pc

5 Double fork spanner 14/17 1 pc

6 Double fork spanner 19/24 1 pc

7 Screwdriver 1 pc

8 V-belt 1 pc

9 Fuel filter 970302742 1 pc

10 Lubricating oil filter970310302 1 pc

11 Operation manual 1 set

Disola W
15W 40

Disola W
15W 40

Multis
XHV2

N.A.

n.a.