Scribd
Upload
323 views2 pages

Orthographic Projection

This document provides instructions for a classwork assignment on orthographic projection for a Production Engineering course. Students are asked to draw the front, left side, and top views of a 3D object in both third angle and first angle projections with a scale of 1:1 using the given dimensions in millimeters. The assignment was provided by Dr. May Youssef for the Drawing of Machine Elements course.

Uploaded by

amany adel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
323 views2 pages

Orthographic Projection

This document provides instructions for a classwork assignment on orthographic projection for a Production Engineering course. Students are asked to draw the front, left side, and top views of a 3D object in both third angle and first angle projections with a scale of 1:1 using the given dimensions in millimeters. The assignment was provided by Dr. May Youssef for the Drawing of Machine Elements course.

Uploaded by

amany adel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Production Engineering

Drawing of Machine Elements Department


(PED 131) Level - 1
Fall semester (2021/2022)

Classwork 2: Orthographic Projection

Question 1:
Draw in the third angle projection with scale 1:1 the following views (all dimensions in mm):
- Front view from A
- Left side view - Top view

1
Question 2:
Draw in the first angle projection with scale 1:1 the following views (all dimensions in mm):
- Front view
- Left side view - Top view

Dr. May Youssef

You might also like