0% found this document useful (0 votes)
111 views1 page

3-In-1 Differential Pressure Controller

Uploaded by

Hector J. Vega
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
111 views1 page

3-In-1 Differential Pressure Controller

Uploaded by

Hector J. Vega
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

®

PRESSURE
SERIES DHC

DIGIHELIC® DIFFERENTIAL PRESSURE CONTROLLER


3-in-1 Differential Pressure Controller
CALIBRATION SERVICES AVAILABLE

53/64 HIGH
[20.96] PRESSURE
1/8 FEMALE NPT HIGH PORT
PRESSURE CONNECTION

1 [25.40] 1 [25.40]

1-3/8 1/8 FEMALE NPT LOW


[34.93] PRESSURE CONNECTION LOW
3x Ø3/16 [4.77] HOLES EQUALLY PRESSURE
SPACED ON A 4-1/8 [104.78] B.C. PORT
SURFACE MOUNTING
1/2 [12.70] 15/64
1/2 [12.70] [5.84] Ø5 [127.00]
1-43/64
[42.34]

The Series DHC Digihelic® Differential Pressure Controller is a 3-in-1 instrument SPECIFICATIONS
possessing a digital display gage, control relay switches, and a transmitter with both Service: Air and non-combustible, compatible gases.
current and voltage outputs. Combining these 3 features allows the reduction of Wetted Materials: Consult factory.
several instruments with one product, saving inventory, installation time, and cost. Housing Material: Polycarbonate.
The Series DHC Digihelic® differential pressure controller is the ideal instrument for Accuracy: ±0.5% FSO for all ranges, except 0.5 in w.c. @ ±1% FSO, and ranges
pressure, velocity, and volumetric flow applications reading in several commonly at or below ±0.25 in w.c. @ ±1.5% FSO.
used engineering units with optional unidirectional or bidirectional ranges. These Stability: < ±1% / year FSO.
units achieve a 1.5% or better accuracy on extremely low ranges, and 0.5% accuracy Pressure Limits: Ranges > 1 in w.c.: 6 psi max operation, 6 psi burst; Ranges ≤ 1
for ranges at or above 1 in w.c. Calibration can be performed in the field, making in w.c.: 3.6 psi max operation, 6 psi burst.
maintaining its accuracy more manageble. Additionally, the Series DHC Digihelic® Temperature Limits: -4 to 158°F (-20 to 70°C).
differential pressure controller includes 2 SPDT control relays with adjustable Thermal Effects: .02% FS / °F (.036% FS / °C).
deadbands. Programming the unit is simple using the built-in menu. With scalable Power Requirements: 12-28 VDC or 12-28 VAC 50 to 400 Hz.
4-20 mA, selectable voltage process outputs, and selectable Modbus® or BACnet Power Consumption: 3 VA max.
communication, this controller can easily fit into your application. Output Signal: 4-20 mA (4-wire); 0-10 V, 0-5 V, 1-5 V, and 2-10 V (4-wire).
Communication: BACnet MS/TP or Modbus® RTU.
BENEFITS/FEATURES Supported Baud Rate: 9600, 19200, 38400, 57600, 76800, 115200.
Gages/Switches, Transmitters

• One instrument saves inventory, installation time, and money with its measurement Device Load: 1/8 unit load.
Differential Pressure

versatility and innovative 3-in-1 design Zero and Span Adjustments: Accessible via menus.
• Measurement precision via full-scale accuracy of 1.5% or better on extremely low Response Time: 400 ms (damping set to 0).
ranges, and 0.5% for ranges at or above 1 in w.c. Display: Backlit LCD display, LED setpoint indicators.
• Safe and secure with security menu programming Electrical Connections: 15 pin male high density D-sub connection. 18˝ (46 cm)
• Simplified field upgrade to DHC pressure controller with optional stainless steel cable with 15 conductors included.
bezel Process Connections: 1/8˝ female NPT ports on side and back.
Enclosure Rating: NEMA 4X (IP66).
APPLICATIONS Mounting Orientation: Not position sensitive.
• SCFM duct flow Size: 5˝ OD (127 mm) x 1.9˝ (48 mm) deep.
• Filter status Weight: 8.8 oz (250 g).
• Duct or building static pressure Compliance: BTL, CE.
• Damper and fan control
SWITCH SPECIFICATIONS
Switch Type: 2 SPDT relays.
MODEL CHART Electrical Rating: 1 A @ 30 VAC/VDC.
Model Range Model Range Set Point Adjustment: Accessible via menus.
DHC-002 0.25 in w.c. DHC-208 ±5 in w.c.
DHC-003 0.5 in w.c. DHC-209 ±10 in w.c.
DHC-004 1 in w.c. DHC-053 60 Pa
DHC-006 2.5 in w.c. DHC-055 125 Pa
DHC-008 5 in w.c. DHC-056 250 Pa
DHC-009 10 in w.c. DHC-253 ±60 Pa
DHC-010 25 in w.c. DHC-255 ±125 Pa
DHC-011 50 in w.c. DHC-256 ±250 Pa
DHC-012 100 in w.c. DHC-082 6 mm w.c.
DHC-202 ±0.25 in w.c. DHC-084 25 mm w.c. ACCESSORIES
DHC-203 ±0.5 in w.c. DHC-282 ±6 mm w.c. Model Description
DHC-204 ±1 in w.c. DHC-284 ±25 mm w.c. A-299 Surface mounting bracket
DHC-206 ±2.5 in w.c. A-300 Flat flush mounting bracket
A-301 Static pressure tip for 1/4˝ metal tubing connection
OPTIONS A-302 Static pressure tip, for 3/16˝ and 1/8˝ ID plastic or rubber tubing.
Use order add suffix: Description A-302F-A 303 SS Static pressure tip with mounting flange, for 3/16˝ I.D. rubber or
-FC Factory calibration certificate plastic tubing. 4˝ insertion depth, includes mounting screws
-NIST NIST traceable calibration certificate A-330 1/8˝ pipe plug, socket hex, plated steel.
-SS 304 brushed stainless steel bezel A-331 1/8˝ NPT filter vent plug, nylon and sintered metal
Example: DHC-202-FC A-489 4˝ straight static pressure tip with flange

Modbus® is a registered trademark of Schneider Automation, Inc.

You might also like