Scribd
Upload
24 views

Input Output Module

The document summarizes an intelligent input/output module for use with an Axis Series intelligent fire alarm control panel. The module provides a supervised initiating device circuit input, an independently controlled Form-C relay contact output, and an unmonitored optically isolated voltage input. It utilizes sub-addressing to expand the system point capacity while minimizing installation and programming time. The initiating device circuit can monitor normally open or normally closed contact devices, and the module is powered by the SLC loop, eliminating the need for additional field wiring or power supplies.

Uploaded by

Musfiqul Azad
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
24 views

Input Output Module

The document summarizes an intelligent input/output module for use with an Axis Series intelligent fire alarm control panel. The module provides a supervised initiating device circuit input, an independently controlled Form-C relay contact output, and an unmonitored optically isolated voltage input. It utilizes sub-addressing to expand the system point capacity while minimizing installation and programming time. The initiating device circuit can monitor normally open or normally closed contact devices, and the module is powered by the SLC loop, eliminating the need for additional field wiring or power supplies.

Uploaded by

Musfiqul Azad
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Input / Output Module

Key Features
Supervised Initiating Device Circuit (IDC)
Class A (Style D) or Class B (Style B) Wiring
The Intelligent Input/Output (I/O) Module is Independently Controlled Form-C Relay Contact
an application specific addressable AX Series Dynamix I/O Relationship Programming
module for use with the Axis Series IDC Activation Status LED
Intelligent Fire Alarm Control Panel. Each Optically Isolated Voltage Input
module is SLC loop powered, eliminating Cost-Effective & Trouble-Free Installation
the need for additional field wiring and
external power supplies.

Designed for installation on the Axis


Specification
Series SLC (signaling line circuit) the AX Series SLC Loop Voltage 17-28 VDC
Intelligent I/O Module provides a single
Surge Current 2.5 mA
initiating device circuit (IDC) input, an
independently controlled Form-C relay Alarm Current 5.0 mA (LED On) (Max.)
contact output, and an unmonitored DC Input (Initiating Device 5-9 VDC
optically isolated voltage input. The I/O Circuit) Voltage
Module utilizes unique sub-addressing for
both the independently controlled relay Supervisory Current 0.85 mA (Max.)
and the optically isolated voltage input. By Line Impedance 100 Ω
sub-addressing these I/O features, AX
Wiring Classification Class A (Style D) or Class B (StyleB)
Series system point capacities are
expanded with installation, programming, End-of-Line Resistor 47 KΩ, 0.5 Watt (Class “B” only)
and commissioning time minimized. Wiring Screw In-Out Terminals

The IDC input of the I/O Module is Mounting 4” Square or 2” Electrical Outlet Box
capable of being wired Class “A” (Style D) Dimensions H x W x D 4 1/2” x 4 1/2”x 1”
or Class “B” (Style B) and can monitor a inches
single contact device or a group of
Weight oz 2.8
devices. Contacts can be normally open
(N.O.) or normally closed (N.C.) ranging Operating Temperature 32°F-120°F (0°C-49°C)
from heat detectors, linear heat detectors,
Humidity 10-93% (non-condensing)
4-wire conventional smoke detectors,
waterflow switches, tamper switches, Approvals / Certification UL Listed (UL864)
manual pull stations, switch input points Relay Output Rating Form-C 24 VDC @ 1 Amp or 30 VAC @ .5 Amp (resistive)
for control, or any other supervised input
requirement. Optically Isolated Input Unsupervised 35 VDC (Max.) Programmable Active High (> 4V) or L
Voltage Input

Order Codes and Options


55000-820AEL: Input / Output Module

You might also like