T3

ANDROID NAVIGATION
INSTALLATION
MANUAL
 CONTENTS
About us ................................................................................................. 1
What you need to know? ......................................................................... 2
1. Installation Notes ................................................................................ 3
1.1 Pinout diagram of the device connector .............................................. 3
1.2 Wiring Diagram ................................................................................ 3
1.3 Introduction on the back of the machine .............................................. 4
1.4 CANBUS Connection & Use .............................................................. 5
1.5 How to connect the rear camera? ....................................................... 7
1.6 How the buttons on the steering wheel work?....................................... 8
1.7 How to adjust the car door direction? .................................................. 9
1.8 How to set up Shortcut Touch? ........................................................... 10
1.9 Can't turn off the DVD when my car is shut down?................................. 10
1.10 Install USB DVR............................................................................... 11
1.11 Install USB TPMS............................................................................. 12
2. Basic operation ................................................................................... 13
2.1 Turning On and Turning Off ............................................................... 13
2.2 Panel Function Button ...................................................................... 13
2.3 Tips for Using Touch Screen .............................................................. 14
3. Function operation ............................................................................. 15
3.1 Basic Settings ................................................................................. 15
3.1.1 User Defined Home Screen .......................................................... 15
3.1.2 Setting Wallpaper ........................................................................ 15
3.1.3 Widget ....................................................................................... 15
3.2 General .......................................................................................... 16
3.2.1 Steering Wheel ........................................................................... 16
3.2.2 Screen Calibration ...................................................................... 16
3.2.3 Navigation application ................................................................. 16
3.2.4 Language ................................................................................... 17
3.2.5 Factory settings .......................................................................... 18
3.2.6 Split screen ................................................................................ 18
3.2.7 Float video settings ..................................................................... 19
3.2.8 Driving appears please pay attention to safety! ............................. 20
3.3 Navigation...................................................................................... 21
3.4 Radio............................................................................................. 22
3.4.1 Function Description ................................................................... 22
3.4.2 Select radio region ...................................................................... 23
3.4.3 Problems you may encounter? ...................................................... 23
4. Trouble handle .................................................................................... 24
5. Hot product for this machine ............................................................... 26
About US

Jansite independently develops and produces safe and quality products to help
people drive safer and easier.

From planning, development, molding to production, Jansite has full scale research
and development and manufacturing capabilities.

-1-
What you need to know?

In order to allow you to better install and use the machine, we have specially
compiled this manual, which summarizes the problems and solutions of common
problems in installation and use.
Before installing and using the machine, I hope you read the following carefully:
1. Regarding the use of the machine:
For your safety, please do not watch videos and operate the machine while driving.
Adjust the volume to a level where you can hear outside sounds while driving.
Before proceeding, please read this manual carefully to help you better install and
use the machine.
2. After successful installation, please give us a 5-star feedback. Your support is
our driving force!
3. If this manual does not solve your problem, please do not worry, contact us, we
will help you solve the problem.

Please Do Not Choose the following wrong practices:

① Give us bad feedback X
(Negative attitude does not solve the problem);
② Open the dispute X
(Dispute is handled by AliExpress, AliExpress is not professional and cannot
solve your fundamental problem).

Please choose the right approach:

① Describe your problem in detail and take
photos for us to view
(For example, some models in different countries,
the power cable may be different, at this time,
please take photos to us, after we confirm,
we will send you the power cable, you see, solving the problem is so simple);
②Wait for our solution
(The world is divided into different time zones, so working hours are different, we
can’t respond immediately, please don’t worry, after we see your message, we will
give you a solution to the problem and leave a message to you.)
-2-
1. Installation Notes

1.1 Pinout diagram of the device connector

Pay attention to the correct wiring.
Improper connection may damage the device.

A: Audio / Video Connector

A C D E F C: CANBUS Connector
G I ANT
POWER
D: USB(4 PIN)
E: USB(6 PIN)
F: Reverse Video Out
H
G: Main Power Cable
GPS
H: GPS
I: Radio

1.2 Wiring Diagram

A
A1: AMP_POW (Amplifier control) A11: NC (Not used)
1 3 5 7 9 11 13 15 17 19 A2: GND (RCA_FL/RCA_FR) A12: GND ground (CVBS_IN1/CVBS_OUT)

2 4 6 8 10 12 14 16 18 20
A3: AUXIN_R (Right channel input) A13: NC (Not used)
A4: RCA_FL (Front left audio output) A14: NC (Not used)
A A5: AUXIN_L (Left channel input) A15: NC (Not used)
A6: RCA_FR (Front right audio output) A16: SUB subwoofer output
A7: NC (Not used) A17: CVBS_IN2 video input 2
A8: GND (AUX IN_L/AUXIN_R) A18: CVBS_IN1 video input 1
1 3 5 7 1 3 1 3 5 1 3 5 7 9
A9: NC (Not used) A19: MIC-microphone -
2 4 6 8 2 4 2 4 6 2 4 6 8 10
A10: GND (CVBS_IN2) A20: MIC+ microphone +
C D E F

C D E F
C1: GND (AUX IN_L/AUXIN_R) D1: USB_5V E1: USB_5V F1: TXD_TPMS OBD
C2: POW_12V D2: USB_DP0 USB0 E2: USB_DP1 USB1 F2: NC (Not used)
C3: AUX2_L D3: GND USB E3: GND USB F3: RXD_TPMS OBD
C4: AUX2_R D4: USB_DN0 USB0 E4: USB_DN1 USB1 F4: GND
C5: KEY_RST E5: USB_DN2 USB2 F5: POW_5V(TPMS)
C6: IPOD_DET E6: USB_DP2 USB2 F6: CAM_CVBS(Reverse image)
C7: CAN_TXD(CANBUS) F7: CAM_12V(Reverse image)
C8: CAN_TXD(CANBUS) F8: CVBS_GND(Reverse image)
F9: PARK_IN(Hand brake detection)
F10: GND

G: Main Power Cable

G1: GND G9: FR- (Speaker Front Right)

G2: B+ 12V G10: RL- (Speaker Rear Left) 3 5 7 9 11 13 15
1
G3: ACC +12V G11: FR+ (Speaker Front Right)
2
4 6 8 10 12 14 16
G4: ILL (Car headlights) G12: RL+ (Speaker Rear Left)
G5: Reverse Detection G13: FL+ (Speaker Front Left) G
G6: KEY 2 G14: RR+ (Speaker Rear Right)
G7: KEY 1 G15: FL+ (Speaker Front Left)
G8: Automatic Antenna Power Supply G16: RR- (Speaker Rear Right)

-3-
1.3 Introduction on the back of the machine:
Please install various cables correctly according to the illustration.

Power Cable RCA Cable Radio GPS

CANBUS Connector USB(4PIN) USB(6PIN) Camera Input

-4-
1.4 CANBUS Connection & Use
The radio is divided into those that require CANBUS and those that do not. The
function of CANBUS is to make certain original car functions work normally, such
as steering wheel control, original car camera and so on.
Most original car radios only have the function of listening to the radio and do not
need CANBUS without a display or an original camera.
We will set up CANBUS before sending the machine. The buyer can plug and play
when the machine is received. If there is a problem, the buyer can check and set
CANBUS according to the CANBUS brand and model or send your CANBUS
option interface to us .
The common CANBUS brands are as follows:

Raise (RZC) Hiworld (HW) Xinbas (XBS) Binary (BNR) Simple soft (XP)

1.4.1 CANBUS wiring diagram (example model: Volkswagen)

Connect CANBUS

Raise CANBUS Connect Player

1.4.2 CANBUS settings (example model: Volkswagen)

1.Click "Settings" to enter the settings pag. 2.Enter “Car settings” .

-5-
3.Click "Factory" . 4.Enter password: 000000, click "√".

5.Click "CarType Setting". 6.Click "Raise"(CANBUS Brand).

7.Click "VW/Skoda/Seat"(Car Brand). 8. Click "VW-SKODA_R01"(Car year and model).

9. Click "OK". 10. The setting is successful.

-6-
1.4.3 Boot logo settings (example model: Volkswagen)

1.Click "Logo Setting" . 2.Click the icon to set successfully

1.5 How to connect the rear camera?

If you need to install a rear camera, please connect as shown below.
① is connected to the reversing trigger line (G5);
②
and ③ are connected to the backup light "+";
④ connected to the backup light "-".

②

Rear camera control

connect to G5(BACK)

①
Rear camera ④
power

GND

-7-
This is the connection principle of the rear camera. In most cases, it can be completed
by directly connecting Back (Reverse) trigger line.
1.5.1 How does the reverse line appear?
A: Settings--Car settings--General--Reverse Line.

1.6 How the buttons on the steering wheel work?

A:If your order is not include canbus, Please go to Steering Learning - follow the
instructions to complete the steering learn.
Steering wheel learning steps:
1) Press any button on the steering wheel, the interface will display, please press
and hold a direction button. If you do not press the button on the steering wheel
within a certain period of time, the learning will fail.
2) Click on the screen to learn the function of docking.
3) Press the corresponding function button on the steering wheel.
Repeat the operation until all the control buttons on the steering wheel have
been learned.
Please refer this video:
https://www.youtube.com/watch?v=O34gzkP1zPQ

1.Click "Enter SWC setting interface". 2.Click "START" to start the setting.

B:If your order includes canbus, please go to the Setting > Car settings >
Factory > Password :000000 > Model choose > Chose your car model
and save it .

-8-
1.7 How to adjust the car door direction?

The default display is the left driving position. If your car is the right driving position,
please set it according to the following steps.
(Only the high-end car models that support CANBUS will show the car information,
please ignore this information for other low-end car models)

1.Click "Settings" to enter the settings pag. 2.Click "Car settings".

3.Click "Factory”,Enter password: 000000. 4.Click "CAN Related Settings".

5.Click "doop map". 6.Set door information.

-9-
1.8 How to set up Shortcut Touch?

1.Click "Settings" to enter the settings pag. 2.Click "Car settings".

3.Click "General". 4.Click "Shortcut Touch".

1.9 Can't turn off the DVD when my car is shut down?
A. Some car models do not completely cut off the power after turning off the
engine. You need to open the door and then close the door to completely
disconnect the power.
B. For Volkswagen cars (including Skoda), you need to do the following:
① Disconnect ②

Connect

高配
If you receive this power cable, please disconnect If you received this power cord, please connect
the place marked by the red circle, and the the place marked with a red circle (the label is
problem will be solved. "高配"), and the problem will be solved.

-10-
1.10 Install USB DVR
If you purchased our USB DVR, please follow these steps:

1. Connect DVR to Android Player by USB port.

2. Click " File Manager " . 3. Click on " DVR.apk " to install.

4. Open the apk. 5. Start your experience!

Newest APP download URL:

https://drive.google.com/file/d/1kDif7P199OQJopwFJbBFKZOTZHB-YtH1/
view?usp=sharing

-11-
1.11 Install USB TPMS
If you purchased our USB TPMS, please follow these steps:

1. Install sensors. 2. Connect receiver to DVD by USB port.

3. Connect U-disk to DVD by USB port. 4. Click " File Manager " .

5. Click on " android10 new.apk " to install. 6. APP install success.

7.Use interface. 8. Pop-up warning display.

-12-
2. Basic operation

2.1 Turning On and Turning Off

When you insert the key and turn on the car's ACC power,
Turning On the device will automatically turn on and display the startup
animation LOGO.

When you remove the key and turn off the car's ACC power,
Turning Off
the device will automatically shut down.

2.2 Panel Function Button

1
2
3
4

5
6
7

1 MIC Bluetooth call sound input 2 RST Click the reset button to reset
the system and restart

3 Short press: mute 4 Back to Home page

Long press: sleep mode

5 Return to the previous interface 6 volume +

7 volume -

-13-
2.3 Tips for Using Touch Screen
When using the touch screen, you can operate the device in the following ways:

2.3.1 Clicking Function

You can select an app icon or option in the display by using the tap function. As in
the screen, tap Bluetooth to enter the Bluetooth application.

2.3.2 Pressing Function

You can tap and hold the function, tap and hold the current operation interface, icon or
input field for more operation options. For example: Tap and hold a blank area on the
main interface, a pop-up menu will open at this time, and you can erform some options
on the menu.

2.3.3 Dragging Function

Swipe the touch screen or tap and hold the scroll bar, then swipe up or down. For example:
Use the swipe function when browsing the Bluetooth phonebook contact list.

2.3.4 Zooming Function

When you view a picture on your device, double-tap the screen to zoom in or out,
or you can use two fingers to tap and hold the screen, then slide the distance
between your fingers to zoom in or out.

Clicking Pressing Dragging Zooming

-14-
3. Function operation

3.1 Basic Settings

3.1.1 User Defined Home Screen
This device does not have a replaceable main interface. You can download
Car Launcher. AGAMA Car Launcher can be used for free:

Here is the APP download link: https://drive.google.com/file/d/1MiystfaAYuCmE

c8QyeovRwA47YlGcbzF/view?usp=sharing

3.1.2 Setting Wallpaper

Tap and hold a blank space on the home screen > Wallpaper > Wallpaper or
Gallery > After selecting your favorite wallpaper, tap Set Wallpaper; or select
a picture in the gallery and tap Save.

3.1.3 Widget
Widgets > Select a widget > Long press to drag to the main page.

-15-
3.2 General

3.2.1 Steering Wheel

The user can set the steering wheel according to the prompts.
Note: The square control interface is only for cars with buttons on the steering wheel,
but some cars cannot learn the steering wheel buttons, For example, olkswagen,
Skoda, etc. are implemented through CANBUS.
Please refer to the video for steering wheel learning:
https://www.youtube.com/watch?v=O34gzkP1zPQ

3.2.2 Screen Calibration

Please use five fingers pressing on the screen at the same time. It will appear 4
points, click on the red point until the learning success. Then enter to learning the
touch button.
Refer to video: https://drive.google.com/file/d/1lIQRobDu74DGBuPZBsPwP61M
_E0W-_gu/view?usp=sharing

3.2.3 Navigation application

Select the corresponding map application to associate the navigation application
icon on the main interface:
Open Settings > Car settings > General> Set the associated navigation program.

-16-
3.2.4 Language
If you need to change the language, follow these steps:

1.Click "Settings". 2.Click "System".

3.Click "Language & input". 4.Click "Language".

5.Click "Add a language". 6.Select the language you need.

7.Select your country. 8.Long press the language and move up to 1th.

-17-
3.2.5 Factory settings
When the system is unavailable or a problem occurs after the user's operation, the
system cannot be used normally, you can restore the factory settings. Restoring the
factory settings of the system will delete the third-party software, and the current
system settings will be lost. The navigation software only needs to reinstall the
corresponding APK. Users should exercise caution.

1.Click "Settings". 2.Click "Car settings".

3. Click " Erase all data( factory reset)". 4.click "OK" and wait for the system to restart.

3.2.6 Split screen

Split screen function can display two apps at the same time, please follow the steps below:
Reference video: https://drive.google.com/file/d/1Ql0nSW_GiMhN167Q80RU-ataslC5B9f
M/view?usp=sharing

1.Click the icon to bring up all running apps. 2.Hold one of the apps and drag it to the left
or right prompt position.
-18-
3.After entering split screen state, we gently 4. In split screen state, you can drag the white
tap (note that it is a click, not a drag) another bar in the middle to adjust the left and right
app to let it automatically fill the other half of screen ratios.
the screen.

5. If you want to exit split screen, operation

method is: hold down one of the apps, drag
it all the way to the edge of the other side of
screen, and then let go.

3.2.7 Float video settings

Float video function can make the video top the other apps. Setting steps:
Reference video: https://drive.google.com/file/d/18xEGlejHVp4eZubF3vqIUZmAeTUi32U
b/view?usp=sharing

1.Click "Settings" to enter the settings pag. 2.Click "Car settings".

-19-
3.Click "Factory”,Enter password: 000000. 4.Click "Video Player".

5.Click "Pip ". 6. Play a video.

7. Click "HOME" button. 8. Video is top on any interface. Click return

button above video to exit.

3.2.8 When l play a video, the screen displays "Driving please pay attention
to safety!"?

1.When this happens when opening the video. 2.Click "Settings" to enter the settings pag.

-20-
3.Click "Car settings". 4.Click "General".

5.Click "Can watch video while drive". 6.The ban was lifted.

3.3 Navigation
You can download and install your favorite navigation application. Here are a
navigation applications and download links we provide:

IGO MAP:
https://drive.google.com/drive/folders/1TiBpxFYRwcRpLPaE_VVLMNMR
K5A3-oXJ?usp=sharing

-21-
3.4 Radio

3.4.1 Function Description

The functions of the icon buttons in the radio interface are described below:

Icon Button name Function Description

Main Menu Click to go back to main interface.

Auto Search Scans and stores radio stations automatically.

Search Channel Click to search channel forwards then stop when find
Forwards strong and clear channel.
Search Channel Click to search channel backwards then stop when find
Backwards strong and clear channel.
FM / AM
Switching Click to switch FM / AM.

Audio switch Click to mute/turn on sound.

Back Click to go back to last interface.

Forward tuning Forward tuning radio

Back tuning Back tuning radio

RDS Click to open RDS related functions.

-22-