6keys+1knob Programmable Keypad User Manual
6keys+1knob Programmable Keypad User Manual
A. preparation:
a. When unpacking, first confirm that there is no obvious damage in the logistics process, and
then click each button normally to confirm that the hand feel is normal; (if some shafts are loose,
just press them normally)
b. Connect the USB cable to the computer. If the connection error is reported, reinstall it or
change another USB port for connection. After the connection is normal, the LED light will flash.
B. Key position:
b. On the lower left side, select “Ctrl Shift Alt” column, click Ctrl, and then click the letter C, as
shown below:
c. The interface after selection is as follows. After confirming that Ctrl and C are selected normally,
click the download button.
d. Next, you can copy the content first, and then press key1 on the keyboard product to confirm
the effect after setting.