Metering Valve with Silencer

ASN2 Series RoHS

Model
Superior sound reducing Sonic conductance Critical pressure
Model Port size Weight (g)
performance dm3/(s⋅bar) ratio
Over 20 dB at max. flow rate ASN2-M5 M5 x 0.8 0.36 5
0.15
Cylinder speed easily set ASN2-U10/32 10-32 UNF 0.36 5
Shape of needle is the same as that of ASN2-01 18 0.72 17
speed controller
ASN2-02 14 1.3 34
Retainer prevents accidental ASN2-03 38 3.32
0.35
55
loss of needle ASN2-04 12 4.9 107

Specifications
Proof pressure 1.5 MPa
Operating pressure range 0 to 1 MPa
Ambient and fluid temperature – 5 to 60°C (No freezing)

How to Order

Symbol
ASN2 03
Lock nut option
Nil Hexagon lock nut
Thread type J Round lock nut
Metric thread (M5)
Nil Unified thread (10-32 UNF) Option Note)
R
<Example of mounting> Nil None
N NPT S With seal
Metering Valve with Silencer Note) M5 and U10/32 are not
available with seals.
Port size
M5 M5 x 0.8
U10/32 10-32 UNF
01 1/8
02 1/4
03 3/8
04 1/2

Needle Valve/
Flow Rate Characteristics Note) The flow rate characteristics are representative values.

Inlet pressure: 0.5 MPa

Flow rate (L/min (ANR))

Number of needle rotations

774
 Metering Valve with Silencer ASN2 Series
Construction

Component Parts
No. Description Material Note
1 Handle PBT
2 Needle Brass Electroless nickel plated
3 Lock nut Steel (2) Zinc chromated (1)
4 Needle guide Brass Electroless nickel plated AS-F
5 Washer Carbon steel Nickel plated
6 O-ring NBR TMH
7 Silencer PVA sponge
8 Silencer cover Soft polyethlene
9 Body B Brass Electroless nickel plated
ASD
10 Gasket NBR/Stainless steel M5, U10/32 only
Note 1) The round lock nut is electroless nickel plated. AS
Note 2) The round lock nut is made of brass. However, note that only
the ASN2-01 and 02 use steel.
AS-FE
Dimensions
KE
AS-FG
(Hexagon width
across flats)
Dimensions AS-FP
Model Screw D øD
L1 (2) H
Min. Max. AS-FM
ASN2-M5 M5 x 0.8 10 20.5 23.3 8
ASN2-U10/32 10-32 UNF 10 20.5 23.3 8
AS-D
ASN2-01 1/8 15 29.1 34.1 12 (12.7)
ASN2-02 1/4 20 33.7 38.7 17 (17.5)
ASN2-03 3/8 25 35.9 40.9 19
AS-T
ASN2-04 1/2 30 48.1 53.1 24 (23.8)
Note 1) (in parentheses) are the dimensions of “NPT” screw specifications. ASP
Note 2) L1: Reference dimensions
Screw D
ASN
AQ
Specific Product Precautions ASV

Be sure to read this before handling the products. AK

Refer to back page 50 for Safety Instructions and pages 543 to 546 for Flow Control Equipment Precautions.
VCHC
ASR
Selection Installation ASQ

Warning Warning
1. Example of inapplicable circuits 1. If installing flow controls to valve ports, interfer-
(a) Perfect Valve (b) Pilot check valve between
ence may occur with the fittings. Please consult the
(VF66, VS7-6-FPG, VS7-8-FPG) Actuator and Valve catalog before installing.

Solenoid valve
Residual pressure behind the ex- Residual pressure behind the ex-
haust needle may cause check haust needle may cause pilot check
valve malfunction in the Perfect valve malfunction.
Valve.
Exhaust port Supply port Exhaust port
(EA) (P) (EB)

Fig. Example of the interference with fittings

775