RTN 905 Brochure

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

HUAWEI TECHNOLOGIES CO., LTD.

RTN 905

The RTN 905 is a new generation integrated microwave transmission system developed
by Huawei, which can be installed easily and configured flexibly. It supports two radio
links, and supports multiple protection schemes. The RTN 905 provides a generic plat-
form for TDM/Hybrid/Packet/Route microwave transmission. The platform provide vari-
ous service interfaces, large bandwidth, and easy scalability. The RTN 905 fully meets
the needs of enterprise microwave transmission networks as well as smooth evolution
towards the future.

Architecture

The RTN 905 adopts an integrated chassis with 1


U height. It belongs to Huawei RTN 900 split IP
microwave series that consist of an indoor unit
(IDU) and an outdoor unit (ODU). The RTN 905
provides various types of interfaces to flexibly
support multiple services and two radio directions.

Applications
The RTN 905 is located at an access site to access multi-service microwave links or
for large-capacity service backhaul. It suits to be deployed in vertical industries with
easy installation and configuration. It has been widely deployed in the ICT infrastruc-
tures in government, ISP, power, broadcasting and other vertical industries.

N+0
Ethernet
MPLS/PWE3 Access site

Highlights

Supports a full spectrum of 6-42 GHz, a channel spacing of 3.5-56 MHz, and a
modulation scheme of up to 2048QAM.
Unified platform for TDM, Hybrid, and Packet services; provides various ports
(E1/SDH/GE/GE).
Provides an air-interface throughput of up to 1 Gbit/s per carrier.
Provides AES-256 encryption and anti-theft to ensure high security.
Supports unique four-layer Ethernet frame header compression to provide a large
throughput for IP services.
Provides a leading 13-grade hitless adaptive modulation technology to ensure high availability.
Supports use of a web-based NMS. You can use it to manage a local or remote NE by
entering the IP address of the NE on the address bar in a browser.

Easy Deployment and O&M

The RTN 905 can be easily installed in any standard indoor or outdoor cabinet.
A plug-and-play USB key can be used to achieve fast startup and service provisioning.
The WLAN-based mobile LCT can be used for fast configuration, the portable Web LCT can
be used for NE-layer management, and the unified platform iManager U2000 can be used for
complete network management.

Specifications

Deployment Scenario Access site

Frequency 6 to 38 GHz

Channel Spacing 3.5/7/14/28/40/50/56 MHz

QPSK Strong, QPSK, 16QAM Strong, 16QAM, 32QAM, 64QAM,


Modulation Mode 128QAM, 256QAM, 512QAM, 512QAM Light, 1024QAM,
1024QAM Light, 2048QAM

Number of RF Directions 2 RF@1 U

Air-Interface Capacity 504 to 636 Mbit/s per carrier (none-XPIC)

Native Ethernet Native Ethernet: 636 (Mbit/s)


Maximum Throughput L2+L3 frame header compression (IPv6): 1000 (Mbit/s)

Switching Capacity 8 Gbit/s


TDM Cross-connect
Capacity 8 × 8 VC-4
Interface Type E1, STM-1(e/o), FE(e/o), GE(e/o)

2 × (1+0)
2+0
RF Configuration Mode
1+1
XPIC

Ethernet ll, IEEE 802.3, and IEEE 802.1q/p service format adding or
deleting, and exchange VLAN tags (IEEE 802.1q/p)
Ethernet Function Supports flow control (IEEE 802.3x)
Supports link aggregation groups (IEEE 802.3ad LAG and L1 LAG)
RMON (IETF RFC 2819)

Service Type Native Ethernet services: E-Line service and E-LAN service

Sync. Eth. USB startup, PLA, AES-256 encryption, Anti-theft, 1+1,


Key Feature
XPIC, AM, TDM, L3VPN, MPLS, PWE3, 1588V2

IDU Weight 3.1 kg

IDU Dimensions 442 mm × 220 mm × 44 mm

Temperature: IDU-5°C to +60°C; ODU -35°C to +55°C


Enviroment
Humidity: IDU 5% to 95%; ODU 5% to 100%

Power -38.4V to -57.6V

Typical Power
92 W
Consumption

Certificate CE, RCM, FCC, IC, ETL, MCMC

You might also like