Sika Viscocrete - 8050sg

Download as pdf or txt
Download as pdf or txt
You are on page 1of 3

PRODUCT DATA SHEET

Sika® ViscoCrete®-8050 SG
HIGH PERFORMANCE SUPERPLASTICISER

DESCRIPTION CHARACTERISTICS / ADVANTAGES


Sika® ViscoCrete®-8050 SG is a third generation super- Sika® ViscoCrete®-8050 SG is a powerful superplasti-
plasticiser for concrete and mortar. For high range wa- ciser based on advanced technology which gives the
ter reducing superplasticisers. following advantages :
▪ High water reduction, resulting in high density, high
USES strength and reduced permeability.
▪ Extended workability in conjunction with sub-
Sika® ViscoCrete®-8050 SG is a unique multi purpose sequent fast strength development.
superplasticiser that is particularly suitable for the pro- ▪ Excellent plasticising effect, resulting in improved
duction of concrete that demands high early strength flow, placing and compaction characteristics.
with extended workability. Additionally it provides ul- ▪ Reduced shrinkage during curing and reduced creep
tra high water reduction and excellent flow character- when hardened.
istics. With its outstanding combination of workability ▪ Provides many opportunities for cost improvement
time and early strength development Sika® Vis- e.g.: Cement reduction, More economic mix design,
coCrete®-8050 SG is used for the following : Reduced energy costs for steam curing precast ele-
▪ A wide range of applications where excellent workab- ments, Reduction of potential claims etc.
ility and good early strength development are re- Sika® ViscoCrete®-8050 SG does not contain chlorides
quired. or any other ingredients which promote the corrosion
▪ Concrete with ultra-high water reduction (up to of steel. It is therefore suitable for use in reinforced
30%). and prestressed concrete structures.
▪ High performance concretes

PRODUCT INFORMATION
Composition Modified polycarboxylate in water.
Packaging 200 L drums (non returnable).
1 000 L IBC’s or tanker delivery on request.
Appearance / Colour Liquid / Brownish
Shelf life 12 months from date of production if stored properly in undamaged un-
opened, original sealed packaging.
Storage conditions Store in dry conditions at temperatures between +5 °C and +30 °C. Protect
from direct sunlight and frost.
Density 1.08 ± 0.01 kg/L (at +25 °C)
Total Chloride Ion Content < 0.1 % w/w

Product Data Sheet


Sika® ViscoCrete®-8050 SG
September 2018, Version 01.01
021301011000002158

1/3
TECHNICAL INFORMATION
Concreting Guidance The standard rules of good concreting practice, concerning production and
placing, are to be followed. Laboratory trials before concreting on site are
strongly recommended when using a new mix design or producing new
concrete components. Fresh concrete must be cured properly and as early
as possible.

APPLICATION INFORMATION
Recommended Dosage For medium workability : 0.3 % - 0.8 % by weight of cement.
For concrete with high workability,
0.8 % - 2.0 % by weight of cement.
very low water/cement ratio :

Compatibility Sika® ViscoCrete®-8050 SG may be combined with the following products:


▪ Plastiment® P121R
▪ Plastiment® VZ
▪ Sika® Fume
▪ SikaFibre®
Do not use viscocrete/viscoflow series combined with sikament series.
To produce flowing and/or self-compacting concrete, special concrete mix
design is required.
Pre-trials are recommended and mandatory if combinations with the above
products are required.
Please consult to our Technical Service Department.

APPLICATION INSTRUCTIONS LOCAL RESTRICTIONS


DISPENSING Note that as a result of specific local regulations the
declared data and recommended uses for this product
Sika® ViscoCrete®-8050 SG is added to the gauging wa- may vary from country to country. Consult the local
ter or simultaneously added with it into the concrete Product Data Sheet for the exact product data and
mixer. To take advantage of the high water reduction, uses.
a wet mixing time of at least 60 seconds is recommen-
ded. ECOLOGY, HEALTH AND SAFETY
IMPORTANT CONSIDERATIONS For information and advice on the safe handling, stor-
age and disposal of chemical products, users shall refer
Excessive water addition or overdosing may cause to the most recent Safety Data Sheet (SDS) containing
bleeding or segregation. If frozen and/or if precipita- physical, ecological, toxicological and other safety-re-
tion has occurred, Sika® ViscoCrete®-8050 SG may be lated data.
used after thawing slowly at room temperature fol-
lowed by intensive remixing.

BASIS OF PRODUCT DATA


All technical data stated in this Data Sheet are based
on laboratory tests. Actual measured data may vary
due to circumstances beyond our control.

Product Data Sheet


Sika® ViscoCrete®-8050 SG
September 2018, Version 01.01
021301011000002158

2/3
LEGAL NOTES
The information, and, in particular, the recommenda-
tions relating to the application and end-use of Sika
products, are given in good faith based on Sika's cur-
rent knowledge and experience of the products when
properly stored, handled and applied under normal
conditions in accordance with Sika's recommenda-
tions. In practice, the differences in materials, sub-
strates and actual site conditions are such that no war-
ranty in respect of merchantability or of fitness for a
particular purpose, nor any liability arising out of any
legal relationship whatsoever, can be inferred either
from this information, or from any written recom-
mendations, or from any other advice offered. The
user of the product must test the product’s suitability
for the intended application and purpose. Sika re-
serves the right to change the properties of its
products. The proprietary rights of third parties must
be observed. All orders are accepted subject to our
current terms of sale and delivery. Users must always
refer to the most recent issue of the local Product Data
Sheet for the product concerned, copies of which will
be supplied on request.

PT. Sika Indonesia Head Office and


Jl. Raya Cibinong-Bekasi Km.20
Limusnunggal-Cileungsi
Bogor 16820-Indonesia
Tel. +62 21 8230025, Fax +62 21 8230026
Web: idn.sika.com
Email: [email protected]

SikaViscoCrete-8050SG-en-ID-(09-2018)-1-1.pdf

Product Data Sheet


Sika® ViscoCrete®-8050 SG
September 2018, Version 01.01
021301011000002158

3/3

You might also like