The document discusses vector groups and winding connections in transformers. It defines a vector group as the IEC method of categorizing the high voltage and low voltage winding configurations of three-phase transformers. The vector group designation indicates the windings configurations and the difference in phase angle between them. It also describes star and delta winding connections, with a star connection having the 3 phase wires connected to a common point and the neutral taken from this, while a delta configuration connects the three windings end-to-end to form a closed path.
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0 ratings0% found this document useful (0 votes)
37 views1 page
Vector Groups
The document discusses vector groups and winding connections in transformers. It defines a vector group as the IEC method of categorizing the high voltage and low voltage winding configurations of three-phase transformers. The vector group designation indicates the windings configurations and the difference in phase angle between them. It also describes star and delta winding connections, with a star connection having the 3 phase wires connected to a common point and the neutral taken from this, while a delta configuration connects the three windings end-to-end to form a closed path.
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1
Assigned by: Submitted by:
VECTOR GROUPS & WINDING Md. Istiac Ahmed
Nazmul Hasan Md. Yousuf Hossain CONNECTION OF TRANSFORMER Lecturer, Dept. of EEE Green University of Bangladesh Shafayat Hossain Romana Parvin Urmi
A vector group is the International Transformer windings consist of
Electrotechnical Commission (IEC) paper-insulated, current carrying method of categorizing the high voltage conductors wound around sections of (HV) windings and low voltage (LV) the core; a winding lead is an insulated winding configurations of three-phase conductor that connects a winding to transformers. another winding, to a tap changer, or to an exit terminal.
The vector group of a transformer In a Star Connection, the 3 phase
indicates what type of connection is wires are connected to a common made between the windings of that point or star point and Neutral is transformer.The vector group of a taken from this common point. The vector group designation indicates transformer indicates what type of the windings configurations and the connection is made between the In a delta configuration, the three windings difference in phase angle between them. windings of that transformer. are connected end-to-end to form a closed path.