Ahteshamulhaque CV

CURRICULUM VITAE
APPLICATION FOR THE POST OF SAFETY ENGINEER
▪ AHTESHAMUL HAQUE
▪ Mobile No: +917905214944
+918858888305
▪ Skype: ahteshamul.2
▪ E-mail : [email protected]
OBJECTIVE
To obtain a position that will allow me to utilize my technical skills, experience and willingness to learn in
making an organization successful.
PROFESSIONAL SUMMARY
Professional Summary Dedicated Safety Engineer with the ability to monitor equipment for safety, while
introducing safety measures that cut costs. Committed to developing the safest possible work area,
working with company management to sustain a good safety record and offering strong suggestions for
bringing in new equipment that will increase productivity and increase safety. Respects the need for
employees and management to feel safe in every work situation.
PROFESSIONAL QUALIFICATION
▪ Satisfied NEBOSH IGC (National Examination Board in Occupational Safety & Health)
(Course Provider: GREEN GLOBAL SAFETY INSTITUTE 1433) in year 2021.
▪ Satisfied NEBOSH HSW (National Examination Board in Occupational Safety & Health)
(Course Provider: SHIELDZ TECHNOLOGIES 1002) in year 2017.
▪ Satisfied IOSH Managing Safely (Institute of Occupational Safety and Health) in year 2017.
▪ Diploma in Industrial Safety & Fire Management from Rajkiya Technical Institute in year 2011,
Jamshedpur Jharkhand.
ACADEMIC QUALIFICATION
▪ Post Graduate (2019)
▪ P.G Diploma in Heath Safety & environment from Annamalai University in year 2019
Tamilnadu.
▪ Graduation: (2013-2017)
▪ B .Tech in Mechanical engineering with 73% from A.K.T.U (state university Lucknow Uttar
Pradesh)
▪ Higher Secondary Schooling: (2012 - 2013)
▪ Board of High School and Intermediate Education Uttar Pradesh with 78.8%.
▪ Secondary Schooling: ( 2009 - 2010)
▪ Board of High School and Intermediate Education Uttar Pradesh with 51.3%.
TRANING
Place Duration
Diesel Locomotive Works Varanasi 221004 (Indian Railway) 1 month
PROJECT
Water channel cleaning system Dedicated (swathe bhart)
ROLL: Managing, Documentation, Design, installation

EXPERIENCE
1. Name of Company: Schneider Electric

CONTRACTOR NAME: Authentic staffing
Position: site safety In-charge
Period: 30 September 2020 to present
Location: Dalla Uttar Pradesh
1. Name of Company: Abu Dhabi National Oil Company (ADNOC LNG ) OFFSORE
CONTRACTOR NAME: Descon Engineering
Position: safety technician
Period: 9Feb 2019 to 30 April 2020
Location: Das Island
2. Name of Company: RELIANCE INDUSTRIES LIMITED

CONTRACTOR NAME: DHAVAL ENGINEERING COMPANY
Position: SAFETY OFFICER

Period: May 2017 TO July 2018
Location: JAMNAGAR GUJRAT
ROLES AND RESPONSIBILITIES
▪ Managing Contractor EHS compliance

▪ Conduct the safety orientation training.
▪ On job safety trainings
▪ Identifying Hazard and assessing risk and taking the preventive measure against these hazards.
▪ Conduct a regular safety toolbox meeting.
▪ Inspection of fire extinguisher
▪ Reporting accident/incident
▪ Development of emergency
▪ Implementation with the company safety procedure to avoid the unsafe activity
▪ Maintain good working knowledge of current regulation, codes and industry best practice, and as a
resource to project management and construction line management.
▪ Keeps and maintain complete record of HSE management system.
▪ Conduct weekly inspection of power tools, hand tools and lifting tools and tackle.
▪ Ensuring that construction site is safe and correctly maintained.
▪ Maintaining first aid facilities
▪ Maintain good housekeeping on job site.
▪ Ensure all required PPE is available in good condition and sufficient quantities for the labor force,
and complaint with the applicable standards and specification.
▪ Assist in the development of manuals, safe operating procedure, and bulletin and safety
publication.
▪ Provide assistance to project management in the implementation of project HSE plan for
construction.
▪ Ensure the safety of man, machine and material at of around working site.
▪ Responsible to rectify the hazardous situation advising the benefits of following safety procedure
▪ To create an environment where all activities are performed in a safe manner.
▪ Responsible for the developing, implementing and maintaining HSE program for all activities of the
company at project site as well as workshop, warehouse, etc.
▪ Daily inspections of the site to identify hazards associated with the work; if any initiate appropriate
to overcome them.
▪ Ensure that the tool box talks are being conducted daily and any deviations that have been
identified the previous day are projected in the meeting to avoid reoccurrence,
▪ Ensure that appropriate personnel protective equipment is being used by the employees at the
work Site.
▪ To identify and promote opportunities for HSE performance improvement within the project.
HSE PRESENTATION AND TRAINING DETAILS
▪ HSE Induction / Orientation for new employees on the project.

▪ IIF (Incident and injury free) for all new employees.
▪ H2S Breathing Apparatus familiarization course.
▪ Defensive Driving Training.
▪ Shock Impact Training & Behavior Safety
▪ Hazard Identification & Recognition
▪ Lockout & Tag out Procedures.
▪ Confined Space & Vessel Entry practical training.
▪ Safe use of Equipment’s training
▪ Boiler safety
▪ Abrasive Wheel Training.
▪ Hot work training.
▪ Manual handling training.
▪ Safe movement of workplace
▪ Fire Watcher Theory & practical.
▪ Work at height, Scaffolding &ladder Safety.
▪ Job Safety Task Instruction
▪ Permit to work (PTW)
KEY SKILLS AND ABILITIES
▪ Ability to work with people at all levels to develop, maintain, communicate and implement the HSE
component of Safety Management System within project.
▪ Ability to implement HSE improvements.
▪ Ability to manage the development of solutions to HSE problems.
▪ Ability to integrate within a multicultural team of HSE professionals within a wider integrated HSE
function.
▪ Thorough knowledge of health, safety and environment legislation.
▪ Experienced in formulating policies for high risk environments then implementing, monitoring,
reviewing and auditing these.
▪ Competent risk assessor.
▪ Able to carry out specific environmental monitoring and sampling tests.

COMPETENCIES
▪ Excellent written and presentation skills.
▪ Maintains effectiveness when experiencing major changes in personal work tasks or work
environment, adjusts effectively to work within new work structures, processes, requirements, or
cultures.
▪ Focuses and guides self and team members in accomplishing work objectives.
▪ Ability to hard work &Comprehensive problem-solving ability.
HOBBIES
▪ Always try to learn new technologies for future life.

▪ Poetry
PERSONAL PROFILE
▪ Date of Birth : 28/09/1995

▪ Father’s Name : Anees Ahmad
▪ Marital Status : Unmarried
▪ Nationality : Indian
▪ Languages Known : English, Urdu, Hindi,
▪ Passport Number : P9431844
▪ Date of Issue : 18/04/2017
▪ Date of Expiry : 14/04/2027
▪ Place of Issue : Lucknow
PERMANENT ADDRESS
Chakhidayeatullah BalarpurDandupur
Allahabad Utter Pradesh India 212111
+917905214944 / +918858888305
DECLARATION
I hereby declare that the above information is up to my best knowledge and belief. I bear the responsibility
for the covertness of the above mentioned particular.
Date :
Place : Signature

Ahteshamulhaque CV

Uploaded by

Copyright:

Available Formats

Ahteshamulhaque CV

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Ahteshamulhaque CV

Uploaded by

Copyright:

Available Formats

CURRICULUM VITAE

APPLICATION FOR THE POST OF SAFETY ENGINEER

making an organization successful.

▪ Post Graduate (2019)

▪ Higher Secondary Schooling: (2012 - 2013)

▪ Secondary Schooling: ( 2009 - 2010)

Water channel cleaning system Dedicated (swathe bhart)

ROLL: Managing, Documentation, Design, installation

1. Name of Company: Schneider Electric

2. Name of Company: RELIANCE INDUSTRIES LIMITED

Position: SAFETY OFFICER

ROLES AND RESPONSIBILITIES

▪ Managing Contractor EHS compliance

HSE PRESENTATION AND TRAINING DETAILS

▪ HSE Induction / Orientation for new employees on the project.

KEY SKILLS AND ABILITIES

▪ Competent risk assessor.

▪ Able to carry out specific environmental monitoring and sampling tests.

▪ Excellent written and presentation skills.

▪ Always try to learn new technologies for future life.

▪ Date of Birth : 28/09/1995

You might also like