Model 220

pH/mV/Conductivity
Research-grade pH
and conductivity
measurements from one me-
ter!
• Simultaneous pH and conductivity 1 pH
measurements, even in the same 7.00
A S 5.0°C
2
solution! 8 p
4.00 0
H
M
7.00 28 P
02:
• Offers conductivity, NaCl salinity, / 199
8
6/30
practical salinity, resistivity and Total
Dissolved Solids ent
Instrum
• Improved conductivity measurements Denver

with 4-band conductivity cell and

multiple standards
• Three electrode inputs
• Fully compliant with the new USP 23
conductivity protocol

Accurate and dependable. Specifications

If you need a high-end conductivity meter along with a depend-
Conductivity Range 0.01 to 3x105 µS/cm (depending on cell con-
able pH workhorse, consider the Denver Instrument Model 220. stant)
This model provides single- or multiple-channel split-screen Resolution 1, 2 or 3 significant figures
measurements of pH and conductivity with the electrodes in the Accuracy ± 0.5% of reading
same solution. Cell Constant 10 cm-1 1.0 cm-1 0.5 cm-1
4 5 4 3 4
Sub-Range 3x10 to 3x10 3x103 to 3x10 1x10 to 1x10
3 4 2 3 2 3
Sub-Range 3x10 to 3x10 3x10 to 3x10 1x10 to 1x10
Conductivity and more! With a few keystrokes, the Model 220 Sub-Range
2
3x10 to 3x10
3 1 2 1
3x10 to 3x10 1x10 to 1x10
2

1 2 0 1 0 1
switches from conductivity to NaCl salinity, practical salinity, Sub-Range 3x10 to 3x10 3x10 to 3x10 1x10 to 1x1
1 0 -1
Sub-Range 0 to 3x10 0 to 3x10 0 to 1x10
resistivity or Total Dissolved Solids. Plus, the meter automatically NaCl Equivalent Salinity Autoranging, 0.01 to 70ppt
selects the correct range for each sample from 5 subranges, auto- Practical Salinity Autoranging, 0.01 to 42ppt
ranges units, or uses fixed units in µS/cm or kilohm•cm. Resistivity Autoranging, 30 ohm•cm to 20 Megohm•cm
(depending on cell constant)
Temperature Correction Off or On, 0 to 4%/°C
The Model 220 offers automatic conductivity calibration, allows
up to 5 points for calibration and uses advanced 4-band conductiv- Modes pH mV Temp
ity circuitry for the most accurate conductivity measurements Range -2.000 to 20.000 ±1800.0 -5.0 to 105.0°C
Resolution 0.1/0.01/0.001 1/0.1 0.1°C
available. Accuracy ±0.002 ±0.1 0.3°C
Automatic Temperature Automatic or manual from -5 to 105°C.
Temperature correction can be programmed either off or on, with Compensation
coefficients from 0 to 4.0%/°C. For more accurate TDS measure- Slope Control Automatic 90 to 105% Manual, 80 to 110%
Environmental 15° to 40°C, 0-90% Relative Humidity
ments, the empirical solids factor can be programmed. Conditions
Power Requirements: 115V 50/60Hz (Additional voltages available)

Ordering Information
Meter with kit includes: Meter, power supply, high performance
ch. A
glass-body pH/ATC Free-flow Platinum junction electrode, elec-
ref. A
ref
temp
A
ch. C
conductivit
y
trode arm and operation manual. Order conductivity cells
ch. F
FET
RS232C
separately.
power
The Meter only includes: Meter, power supply, electrode arm and
operation manual.
Meter with Kit Cat. No. 02-226-109
Meter Only Cat. No. 02-226-157

Denver Instrument Company

6542 Fig Street • Arvada, Colorado 80004 U.S.A.
1-800-321-1135 • (303) 431-7255 • Fax (303) 423-4831