SIRIM QAS International Sdn. Bhd.

(Company No.: 199601037981 (410334-X))

No.1, Persiaran Dato' Menteri, P.O.BOX 7035, Section 2,
40700 Shah Alam, Selangor Darul Ehsan, Malaysia
Tel: 03-55446660
Fax: 03-55446688
www.sirim-qas.com.my

TEST REPORT
REPORT NO : 2022CE0868 PAGE : 1 OF 3
This Test Report refers only to samples submitted by the applicant to SIRIM QAS International Sdn. Bhd. and tested by SIRIM QAS
International Sdn. Bhd. This Test Report shall not be reproduced, except in full and shall not be used for any purpose by any means or
forms (including but not limited to advertising purposes) without written approval from the Head of Quality, Occupational Safety and Health
& Environment (QOSHE), SIRIM QAS International Sdn. Bhd. Please refer to the last page of this Test Report for Conditions Relating to
the Use of Test Report.

THIS TEST REPORT IS ISSUED IN SECURED PDF SOFTCOPY

Applicant : DRITECH CHEMICALS SDN BHD

NO. 56, JALAN 6/2,
BANDAR RINCHING, SEKSYEN 6,
43500 SEMENYIH,
SELANGOR, MALAYSIA.
Manufacturer : DRITECH CHEMICALS SDN BHD
NO. 56, JALAN 6/2,
BANDAR RINCHING, SEKSYEN 6,
43500 SEMENYIH,
SELANGOR, MALAYSIA.
Product : DRI-FLOOR EP 1550
Reference Standard / : SIRIM ECO 019 : 2019 ECO - LABELLING CRITERIA FOR PAINTS AND
Method of Test COATINGS
Description of sample : Received one (1) sample for testing which was labelled as:
Product name: DRI-FLOOR EP 1550
Brand: DriTech
Product description: 2-part, pigmented epoxy resin self-levelling
compound
Sample received date: 23/3/2022
Date Received of : 03 March 2022
Complete Application
Job No. : J20223670393
Description of Test : The test results for the submitted test sample as described in Page 2 of
Results this test report complied with the requirements of the above reference
standard at the respective clauses tested.
Issued Date : 12 April 2022

Approved Signatory;

...................................................... ......................................................
(MUHAMMAD ZUHAIRI BIN BORHAN) (HAHNAS BINTI MAHBUT)
Testing Executive Head
Chemical, Polymer and Composite Section
Testing Services Department
REPORT NO : 2022CE0868 PAGE : 2 OF 3
This Test Report refers only to samples submitted by the applicant to SIRIM QAS International Sdn. Bhd. and tested by SIRIM QAS
International Sdn. Bhd. This Test Report shall not be reproduced, except in full and shall not be used for any purpose by any means or forms
(including but not limited to advertising purposes) without written approval from the Head of Quality, Occupational Safety and Health &
Environment (QOSHE), SIRIM QAS International Sdn. Bhd. Please refer to the last page of this Test Report for Conditions Relating to the
Use of Test Report.

TEST RESULTS

Product name : DRI-FLOOR EP 1550

Brand : DriTech
Product description : 2-part, pigmented epoxy resin self-levelling compound

Requirements of
SIRIM ECO
No. Type of Tests Results Remarks
019:2019
(Industrial Coating)

1. Volatile organic compound (VOC) < 340 22.8 Pass

content, g/l

2. Heavy Metals, % w/w(a) < 0.01 0.0055 Pass

3. Aromatic hydrocarbons, % w/w <5 0.5 Pass

2. Halogenated hydrocarbons, % w/w < 0.01 < 0.00001(b) Pass

3. Formaldehyde, % w/w < 0.01 0.00095 Pass

Note :
1) a) sum of mercury (Hg), lead (Pb), cadmium (Cd) and hexavalent chromium (Cr6+)
b)
Limit of quantitation
2) Testing period: 31 March – 8 April 2022
3) Simple acceptance rule is used for the conformity statement. The level of risk regarding the probability of false accept is up to 50%
REPORT NO : 2022CE0868 PAGE : 3 OF 3
This Test Report refers only to samples submitted by the applicant to SIRIM QAS International Sdn. Bhd. and tested by SIRIM QAS International Sdn.
Bhd. This Test Report shall not be reproduced, except in full and shall not be used for any purpose by any means or forms (including but not limited to
advertising purposes) without written approval from the Head of Quality, Occupational Safety and Health & Environment (QOSHE), SIRIM QAS
International Sdn. Bhd. Please refer to the last page of this Test Report for Conditions Relating to the Use of Test Report.

CONDITIONS RELATING TO THE USE OF SIRIM QAS INTERNATIONAL TEST REPORT

1. A Test Report will be issued in respect of Testing Services conducted and shall relate only to the sample actually tested. SIRIM QAS International
makes no warranty whatsoever and the Applicant shall not represent in any manner that any duplication or mass production of the Product is same
as the sample actually tested or that SIRIM QAS International has tested any of the duplicated or mass-produced Product. Measurement uncertainty
shall be included in the Test Report when there is no statement of conformity required. When a statement of conformity to a specification or standard
is applied, the Simple Acceptance Rule is used. Unless otherwise stated, the Acceptance Rule with Guard Band is used.

2. The Test Report shall not be misused, amended, changed, varied or modified in any manner whatsoever by the Applicant or otherwise.

3. If the Test Report is to be furnished to any third party or to the public, each such Test Report shall be furnished in full, legible and in its entirety.

4. The Test Report shall not be reproduced and shall not in any event be used for any advertising purposes or whatsoever without written approval from
the Head of Quality, Occupational Safety and Health & Environment (QOSHE) of SIRIM QAS International of No 1, Persiaran Dato' Menteri, Building
8, Section 2, P.O. Box 7035, 40700 Shah Alam, Selangor Darul Ehsan.

5. Customer (Applicant/Manufacture/Factory,etc.) is not permitted to use any SIRIM QAS International, SIRIM or other SIRIM's subsidiaries logo or words
on packaging, sample's manual, technical specification, items and products.

6. Subject to consent and written approval from the Head of Quality, Occupational Safety and Health & Environment (QOSHE) of SIRIM QAS
International, the customer (Applicant/Manufacture/Factory,etc.) may use SIRIM QAS International logo or word on the promotional materials and the
Applicant shall only include the phrase, "A sample of this product has been tested by SIRIM QAS International ...(Test Report No) ...(dated) ...(for
what test) ...(to which standard)" or such similar words which stress that only the sample was actually tested. This phrase shall only be used for the
purpose of product advertisement or product promotion (eg; brochures/flyers/official website). For avoidance of doubt, the statement shall not be
used on the sample, packaging of the sample, items and products.

7. In the event there is an investigation from a Government Regulatory Agency concerning the Applicant's Test Report, SIRIM QAS International may
disclose the information pertaining to the Test Report for purposes of such investigation.

8. In the event the Applicant is found in breach of this provision, SIRIM QAS International, SIRIM and/or other SIRIM's subsidiaries without prejudice to
any other rights and remedies may take whatever action necessary including but not limited to:
a) Informing and placing a notice in the media;
b) Obtaining an injunction from Court (cost on a solicitor-client basis to be borne by the Applicant);
c) Refusing to accept any further Product for Testing Services from the Applicant or whosoever related to the Applicant, whether subsidiary or
otherwise;
d) Instructing the Applicant to withdraw and recall the advertisement, statement or document in question and advertise a clarification and apology to
SIRIM QAS International, SIRIM and/or other SIRIM's subsidiaries twice in a national publication of SIRIM QAS International's choice at the
Applicant's sole cost; and
e) Informing or lodging a report pertaining the Applicant's Test Report with the relevant authorities.

9. SIRIM QAS International is committed in supporting an environmentally-friendly business practices by reducing paper consumption, therefore we do not
issue any hard copy of Test Report to the Applicant. However, additional certified true copy(ies) or softcopy of the Test Report may be issued upon
request by the Applicant upon payment of the relevant fee. The certified true copy(ies) or softcopy of test report shall only be given for test report
issued not more than three (3) years from the date of issuance.

10. Issuance of Amendment Report due to the following reasons are chargeable to the Applicant :
a) Changes in details of the Applicant name and/or address;
b) Changes in details of the Manufacturer's name and/or address;
c) Changes in details of the Factory location name and/or address;
d) Changes in details of the model and/or type designation

11. However, issuance of Supplementary Report due to the following reasons are FOC :
a) Misprints and typo errors;
b) Missing technical information as agreed in PP1 form;
c) Test data not reported;
d) Mistake in reporting of test data

12. Corrections to report shall only be allowed if the date of issuance of the original report has not exceeded 6 months and shall be limited to a maximum
3 times, after either case whichever occurs earlier, an Amendment or a Supplementary Report shall not be issued.