ELECTRONICS BRACKET SUBASSEMBLY

ITEM
NO PART NUMBER QTY DESCRIPTION NOTES

1 ELECTRONICS_BRACKET 1 ELECTRONICS BRACKET ELECTRONICS_BRACKET.STL

2 INSERT_M3 2 HEATSET INSERT - M3 INSTALL WITH SOLDERING IRON
 FILAMENT GUIDLER SUBASSEMBLY

1 2 3

ITEM
NO PART NUMBER QTY DESCRIPTION NOTES

1 FILAMENT_GUIDLER 1 FILAMENT GUIDLER FILAMENT_GUIDLER.STL

2 INSERT_M3 2 HEATSET INSERT - M3 INSTALL WITH SOLDERING IRON
3 BEARING_623-2Z 1 BEARING 623-2Z INSTALL AS SHOWN
4 BHCS_M3_8MM 1 BUTTON HEAD CAP SCREW - M3 X 8mm INSTALL AS SHOWN
 FRAME BRACKET SUBASSEMBLY

3 1

ITEM
NO PART NUMBER QTY DESCRIPTION NOTES

1 FRAME_BRACKET 1 FRAME BRACKET FRAME_BRACKET.STL

2 INSERT_M3 6 HEATSET INSERT - M3 INSTALL WITH SOLDERING IRON
3 MAGNET_6MMX2MM 2 MAGNET 6mm X 2mm INSTALL WITH SUPERGLUE IF NEEDED
 GEARBOX OUTPUT GEAR SUBASSEMBLY

5 1 4 3 2

ITEM
NO PART NUMBER QTY DESCRIPTION NOTES

1 GEARBOX_OUTPUT_GEAR 1 GEARBOX OUTPUT GEAR GEAR_BOX_OUTPUT_GEAR.STL

2 BEARING_608-2RS 1 BEARING 608-2RS PRESS INTO CENTER OF OUTPUT GEAR
3 BHCS_M3_12MM 8 BUTTON HEAD CAP SCREW - M3 X 12mm INSTALL AS SHOWN ABOVE
4 INSERT_M3 4 HEATSET INSERT - M3 INSTALL WITH SOLDERING IRON
5 NUT_M3 8 HEX NUT - M3 INSTALL AS SHOWN ABOVE
 LEFT LOWER ARM SUBASSEMBLY
1

ITEM
NO PART NUMBER QTY DESCRIPTION NOTES

1 LEFT_LOWER_ARM 1 LEFT LOWER ARM LEFT_LOWER_ARM.STL

2 INSERT_M3 3 HEATSET INSERT - M3 INSTALL WITH SOLDERING IRON
3 MAGNET_6MMX2MM 1 MAGNET 6mm X 2mm INSTALL WITH SUPERGLUE IF NEEDED
 LEFT UPPER ARM SUBASSEMBLY

3 2

ITEM
NO PART NUMBER QTY DESCRIPTION NOTES

1 LEFT_UPPER_ARM 1 LEFT UPPER ARM LEFT_UPPER_ARM.STL

2 BHCS_M3_12MM 1 BUTTON HEAD CAP SCREW - M3 X 12mm INSTALL AS SHOWN
3 NUT_M3 1 HEX NUT - M3 INSTALL AS SHOWN
 MELTZONE SUBASSEMBLY

1 2

ITEM
NO PART NUMBER QTY DESCRIPTION NOTES

1 MELTZONE 1 MELTZONE MELTZONE.STL

2 INSERT_M3 10 HEATSET INSERT - M3 INSTALL WITH SOLDERING IRON
 MELTZONE COMPLETE ASSEMBLY

6 2 4 5 8

ITEM
NO PART NUMBER QTY DESCRIPTION NOTES

1 MELTZONE_ASSEMBLY 1 MELTZONE SUBASSEMBLY

2 MELTZONE_WING_ASSEMBLY 2 MELTZONE WING SUBASSEMBLY INSTALL MELTZONE WINGS BEFORE FAN
3 FAN_6020 1 FAN 24V 60mm X 60mm X 20mm
4 VOLCANO_HOTEND 1 VOLCANO HOTEND BLOCK
5 NOZZLE 1 NOZZLE
6 BHCS_M3_30MM 8 BUTTON HEAD CAP SCREW - M3 X 30mm
7 BHCS_M3_12MM 6 BUTTON HEAD CAP SCREW - M3 X 12mm
8 NUT_M3 2 HEX NUT - M3 TIGHTEN NUTS AFTER INSTALLING HEATER
 MELTZONE WING SUBASSEMBLY

ITEM
NO PART NUMBER QTY DESCRIPTION NOTES

1 MELTZONE_WING 1 MELTZONE WING MELTZONE_WING.STL

2 INSERT_M3 5 HEATSET INSERT - M3 INSTALL WITH SOLDERING IRON
 OUTLET SUBASSEMBLY

3 4

ITEM
NO PART NUMBER QTY DESCRIPTION NOTES

1 OUTLET 1 OUTLET OUTLET.STL

2 INSERT_M3 4 HEATSET INSERT - M3 INSTALL WITH SOLDERING IRON
3 BHCS_M3_6MM 2 BUTTON HEAD CAP SCREW - M3 X 6mm INSTALL AS SHOWN
4 C14_PANEL_MOUNT_PLUG 1 C14 PANEL MOUNT PLUG INSTALL AS SHOWN
 PANEL STABILIZER SUBASSEMBLY

ITEM
NO PART NUMBER QTY DESCRIPTION NOTES

1 PANEL_STABILIZER 1 PANEL STABILIZER PANEL_STABILIZER.STL

2 INSERT_M3 2 HEATSET INSERT - M3 INSTALL WITH SOLDERING IRON
 Feel free to find these parts on Aliexpress too, they are mostly available on Triangle Labs and Mellow.
And are usually much cheaper at the cost of taking longer to ship.
The Amazon links are AFFILIATE links!!! It helps support the development and maintenance of the project.
Component BOM Qty Safe Qty Notes Link
Hardware M3x5x4mm Heatset Insert check below DFH Aliexpress Amazon Sparta3D(CA) Fermiolabs
M3 x 5mm OD x 4mm Depth $8
623 Bearings 3x10x4mm 4 Amazon $9
608 Bearing 8mm x 22mm x 7mm 3 Amazon $7
1/16in or 1.6mm drill bit 1 Amazon or Amazon
12mmx300mm Tubing or Rod (No wooden dowel please) (There is a shortage on the tube, please share the link in #resources if you find some) 5 Aliexpress or Amazon or Amazon or Amazon $16
M3 (7mm*preferred - 6mm) x 0.5mm black oxide carbon steel washer check below DIN 125A Amazon $9
Assorted M3 BHCS screws 6/8/12/20/30mm 1 The link only has 50pcs 12mm, you need some more Amazon $16
M3 BHCS screws 12mm 100 Pack 1 The kit above doesn't have enough 12mm Amazon
Optional: Buy the screws separately Boltdepot
PTFE Lubricant 1 Amazon
Optional: Wera 2mm Hex screwdriver 80mm length 1 Amazon or Amazon
Electronics BTT SKR Pico, SKR 1.3 or any other cheaper MCU that can run Klipper 1 Amazon DFH $55
6020 or 6025 24v Fan 1 Amazon DFH $8
Raspberry Pi Zero W, or Raspberry Pi Zero 2 W, Raspberry Pi 1, Pi 2, Pi 3, Pi 4, (optional if you have a klipper printer) 1 RPI Tracker
Micro SD Card (optional if you have a klipper printer) 1 Amazon
NEMA17 stepper 59Ncm less than 48mm length 1 Amazon or Aliexpress $14
C13 Power Cable 1 Amazon
C14 Panel Mount Plug 1 Amazon $9
Mean Well LRS-75-24 or LRS-100-24 power supply 1 Amazon or Amazon or Digikey or Digikey $19
Option 1: Knock off Volcano+Thermistor+Nozzle Bundle (Good enough and cheap) 1 Amazon $12
Option 1: 24v 40W heater cartridge (the bundle has a 64w cartridge which doesn't work, so please also get a 24v 40w cartridge) 1 DFH or Amazon or Microcenter
Option 1: JST XH Extension cable 3 Amazon
Option 2: E3D Volcano Heater Block 1 Amazon
Option 2: 24v 40W Heater Cartridge 1 DFH or Amazon or Microcenter
Option 2: M3 Screw Thermistor 104NT 2 Amazon
Option 2: Genuine E3D Brass Volcano Nozzle - 3.00mm x 1.20mm / Generic 3.0mm x whatever nozzle 1 Amazon or Amazon
Misc. 6mmx3mm magnets 24 Amazon $7
60C safety thermolabel (optional) 1 PaperThermometer Amazon
E3D Volcano Hotend Silicon socks (optional, needs some cutting to fit) 1
Printed Parts PLA, ABS, PETG or PET (Please adjust for the shrink rate in slicer, ex. ABS has ~0.6% sinkage, PETG has ~0.15%, or scale the model only in XY accordingly) 1
2.0kg of main color and 0.5kg of accent color
Fasteners list BHCS M3x6mm 39 ±10%
BHCS M3x8mm 14 ±10%
BHCS M3x12mm 58 ±10%
BHCS M3x20mm 9 ±10%
Stainless Steel BHCS M3x30mm 4 ±10%
M3 Nuts 13 ±10%
Carbon Steel M3 Washer 11 ±10%
M3x5x4mm Heatset Insert 108 ±10%
PolyCutter_Lite 623 Bearings 3x10x4mm 2 Amazon
Already included above M3x5x4mm Heatset Insert 3 DFH Aliexpress Amazon Sparta3D(CA) Fermiolabs
BHCS M3x12mm 5 Boltdepot
12mmx300mm Tubing or Rod (No wooden dowel please) (There is a shortage on the tube, please share the link in #resources if you find some) 1 Aliexpress or Amazon or Amazon or Amazon
Suppliers Fermiolabs-EU
Decoprint3d-EU
Kris3D_de-EU
Vonwange-EU
Lecktor-EU
DFH(formossisima 3D printing)-US
Fabreeko-US
Printed_Solid-US
Digmach-US
kb3d-US
Filastruder-US
Sparta3D-CA
3dlabtech-CA
Uniqueprints-AU

Onetwo3D-GB
printyplease-GB
Powge-CN
Magicstudios-CN
RIBBON CARTRIDGE HOLDER SUBASSEMBLY

1
3 2

ITEM
NO PART NUMBER QTY DESCRIPTION NOTES

1 RIBBON_CARTRIDGE_HOLDER 1 RIBBON CARTRIDGE HOLDER RIBBON_CARTRIDGE_HOLDER.STL

2 INSERT_M3 2 HEATSET INSERT - M3 INSTALL WITH SOLDERING IRON
3 MAGNET_6MMX3MM 3 MAGNET 6mm X 3mm INSTALL WITH SUPERGLUE IF NEEDED
 RIGHT ARM DRIVE UNIT SUBASSEMBLY

1 2 3 6 8 7 10 11 12 13 14 15

5 4 9 16

ITEM
NO PART NUMBER QTY DESCRIPTION NOTES

1 RIGHT_UPPER_ARM_ASSEMBLY 1 RIGHT UPPER ARM SUBASSEMBLY SEE SUBASSY DRAWING FOR DETAILS
2 17HS19-2004S1 1 STEPPER MOTOR, NEMA 17 X 48mm FEED STEPPER WIRES THROUGH UPPER ARM
3 GEARBOX_MOTOR_MOUNT 1 GEARBOX MOTOR MOUNT GEARBOX_MOTOR_MOUNT.STL
4 BHCS_M3_6MM 4 BUTTON HEAD CAP SCREW - M3 X 6mm INSTALL STEPPER TO MOTOR MOUNT PRIOR TO INSTALLATION INTO UPPER ARM
5 BHCS_M3_8MM 8 BUTTON HEAD CAP SCREW - M3 X 8mm ASSEMBLE MOTOR MOUNT AND MOTOR TO ARM WITH THIS HARDWARE
6 GEARBOX_FAN 1 GEARBOX FAN SLIDE ONTO STEPPER SHAFT
7 GEARBOX_RING_GEAR 1 GEARBOX RING GEAR INSTALL AS SHOWN
8 BEARING_608-2RS 1 BEARING 608-2RS INSTALL INTO RING GEAR AND INSERT BOTH INTO MOTOR MOUNT
9 GEARBOX_CAM 1 GEARBOX CAM INSTALL ONTO SHAFT THROUGH RING GEAR BEARING
10 GEARBOX_OUTPUT_GEAR_ASSEMBLY 1 GEARBOX OUTPUT GEAR SUBASSEMBLY INSTALL ONTO CAM AND ALIGN SCREWS INTO HOLES IN RING GEAR
11 GEAR_BOX_CAP 1 GEARBOX CAP INSTALL BY ROTATING ANTI-CLOCKWISE (LEFT-HAND THREADS)
12 SPOOL_SHAFT_ASSEMBLY 1 SPOOL SHAFT SUBASSEMBLY SLIDE OVER GEARBOX ASSEMBLY
13 BHCS_M3_12MM 4 BUTTON HEAD CAP SCREW - M3 X 12mm ASSEMBLE AS SHOWN TO ATTACH SPOOL SHAFT TO OUTPUT GEAR ASSY
14 SHAFT_KNOB_FASTENER 1 SHAFT KNOB FASTENER ASSEMBLE AS SHOWN
15 BHCS_M3_20MM 1 BUTTON HEAD CAP SCREW - M3 X 20mm USE TO SECURE SHAFT KNOB FASTENER
16 SHAFT_KNOB_ASSEMBLY 1 SHAFT KNOB SUBASSEMBLY SNAP KNOB ASSEMBLY ONTO SHAFT KNOB FASTENER
 RIGHT LOWER ARM SUBASSEMBLY

ITEM
NO PART NUMBER QTY DESCRIPTION NOTES

1 RIGHT_LOWER_ARM 1 RIGHT LOWER ARM RIGHT_LOWER_ARM.STL

2 INSERT_M3 10 HEATSET INSERT - M3 INSTALL WITH SOLDERING IRON
3 MAGNET_6MMX2MM 1 MAGNET 6mm X 2mm INSTALL WITH SUPER GLUE IF NEEDED
 RIGHT UPPER ARM SUBASSEMBLY
2

ITEM
NO PART NUMBER QTY DESCRIPTION NOTES

1 RIGHT_UPPER_ARM 1 RIGHT UPPER ARM RIGHT_UPPER_ARM.STL

2 INSERT_M3 17 HEATSET INSERT - M3 INSTALL WITH SOLDERING IRON
 SHAFT KNOB SUBASSEMBLY

1 2

ITEM
NO PART NUMBER QTY DESCRIPTION NOTES

1 SHAFT_KNOB 1 SHAFT KNOB SHAFT_KNOB.STL

2 BEARING_608-2RS 1 BEARING 608-2RS INSTALL AS SHOWN
 SPOOL ASSEMBLY

3 2

SUPERGLUE
SHIELDS TO BODY

ITEM
NO PART NUMBER QTY DESCRIPTION NOTES

1 SPOOL_BODY 1 SPOOL BODY SPOOL_BODY.STL

2 SPOOL_SHIELD_LEFT 1 SPOOL SHIELD LEFT SPOOL_SHIELD_LEFT.STL
3 SPOOL_SHIELD_RIGHT 1 SPOOL SHIELD RIGHT SPOOL_SHIELD_RIGHT.STL
 SPOOL SHAFT SUBASSEMBLY

1
2

ITEM
NO PART NUMBER QTY DESCRIPTION NOTES

1 SPOOL_SHAFT 1 SPOOL SHAFT SPOOL_SHAFT.STL

2 INSERT_M3 1 HEATSET INSERT - M3 INSTALL WITH SOLDERING IRON