SGS-5240 series

Layer 2+ Multiple Gigabit + 4-Port 10G SFP+

Stackable Managed Switch

Physical Ports
• 24/48 10/100/1000BASE-T RJ45 copper ports
• 24 100/1000BASE-X SFP slots (SGS-5240-20S4C4XR)
• 4 10GBASE-SR/LR SFP+ slots, compatible with
1000BASE-SX/LX/BX SFP
• RJ45 to DB9 console interface for switch basic
management and setup
• One 10/100BASE-TX Management port

Stacking Features
PLANET SGS-5240 series is a Layer 2+ Stackable Managed Gigabit Switch that • IP Stacking

provides high-density performance, Layer 3 static routing with 10Gbps uplink –– Connects with stack member via Gigabit TP, SFP and
10G SFP+ interfaces
interfaces delivered in a rugged, strong case.
–– Single IP address management, supporting up to 16
IP units stacked together
The administrator can flexibly choose the suitable SFP/SFP+ transceiver according
• Hardware Stacking
to the transmission distance or the transmission speed required to extend the 10G
–– Virtualized multiple SGS-5240 switch series stacked
network efficiently. Besides, with 128/178Gbps switching fabric, the SGS-5240 into one logical device
series can handle extremely large amounts of data in a secure topology linking to –– Connects with stack member via assigned 10G SFP+

backbone or high capacity servers for ISP and enterprise VoIP, video streaming, interfaces
–– Single IP address stack management, supporting up
and multicast applications.
to 6 hardware units stacked together

High Reliability Hardware Stacking –– Stacking architecture supports redundant ring mod

Two of the 10G SFP+ ports are used to connect several SGS-5240 series,

enabling to build a virtually logical facility. The SGS-5240 series gives the
IP Routing Features
• IPv4/IPv6 hardware static routing
enterprises, service providers and telecoms flexible control over port density,
• Routing interface provides per VLAN routing mode
uplinks and switch stack performance. The SGS-5240 series can be connected as

a ring for redundancy and ensures that data integrity is retained even if one switch
Layer 2 Features
in the stack fails. You can even hot-swap switches without disrupting the network,
• Supports VLAN
which greatly simplifies the tasks of upgrading the LAN for catering to increasing
–– IEEE 802.1Q tag-based VLAN
bandwidth demands. –– Provider Bridging (VLAN Q-in-Q, IEEE 802.1ad)
supported
–– GVRP for dynamic VLAN management
–– Protocol-based VLAN
Master –– MAC-based VLAN
–– IP subnet-based VLAN
Slave
–– Voice VLAN
Slave • Supports Link Aggregation
Slave –– 802.3ad Link Aggregation Control Protocol (LACP)
–– Cisco ether-channel (static trunk)
Slave
• Supports Spanning Tree Protocol
Slave –– STP, IEEE 802.1D (Classic Spanning Tree Protocol)
–– RSTP, IEEE 802.1w (Rapid Spanning Tree Protocol)

1
 SGS-5240 series

Central IP Stacking Management

–– MSTP, IEEE 802.1s (Multiple Spanning Tree Protocol,
Positioned as the distribution or aggregation layer switch for large networks, the
spanning tree by VLAN)
SGS-5240 series supports IP stacking function that helps network managers
–– Supports BPDU & root guard
to easily configure up to 16 switches in the same series via one single IP • Port mirroring to monitor the incoming or outgoing traffic
address instead of connecting and setting each unit one by one. The IP Stacking on a particular port (many to one)
technology groups PLANET SGS-5240 switch series together to enable centralized • Supports G.8032 ERPS (Ethernet Ring Protection
management through a single unit, regardless of physical location or switch type, Switching)

as long as they are connected to the same local network. • Loop protection to avoid broadcast loops
• Link Layer Discovery Protocol (LLDP)
IP Stacking/Cluster • Compatible with Cisco uni-directional link detection
Up to 16 units with SGS-5240 Series
(UDLD) that monitors a link between two switches and
Master
blocks the ports on both ends of the link if the link fails at
any point between the two devices

10G Fiber 10G Fiber 10G Fiber

Quality of Service
• Input and output rate limit per port bandwidth control
• 8 priority queues on all switch ports
–– IEEE 802.1p CoS/DSCP/IP Precedence
Slave Slave Slave –– VLAN ID
–– ACL
High Performance 10Gbps Ethernet Capacity
–– Policy-based ingress and egress QoS
The four SFP+ slots built in the SGS-5240 series support dual speed and

10GBASE-SR/LR or 1000BASE-SX/LX. With its 4 ports, 10Gbps and 1Gbps

Multicast
Ethernet link capability, the administrator now can flexibly choose the suitable SFP/
• Supports IPv4 IGMP snooping v1, v2 and v3
SFP+ transceiver according to the transmission distance or the transmission speed • Supports IPv6 MLD snooping v1 and v2
required to extend the network efficiently. The SGS-5240 Series provides broad • Querier mode support
bandwidth and powerful processing capacity. • IPv4 IGMP snooping port filtering
• IPv6 MLD snooping port filtering
Redundant Ring, Fast Recovery for Critical Network Applications • MVR (Multicast VLAN Registration)
The SGS-5240 series supports redundant ring technology and features strong,

rapid self-recovery capability to prevent interruptions and external intrusions. It

Security
incorporates advanced ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) • Authentication
technology and Spanning Tree Protocol (802.1s MSTP) into customer’s network –– IEEE 802.1x port-based/MAC-based network access
to enhance system reliability and uptime in harsh environments. In a certain simple authentication

Ring network, the recovery time could be less than 50ms to quickly bring the –– IEEE 802.1x authentication with guest VLAN
–– Built-in RADIUS client to cooperate with the RADIUS
network back to normal operation.
Enterprise Branch servers

Headquarters
–– RADIUS/TACACS+ users access authentication
SGS-5240-20S4C4XR –– Guest VLAN assigns clients to a restricted VLAN with
10G limited services
• Access Control List
SGS-5240 Series
10G
–– IP-based Access Control List (ACL)
ERPS Ring for Metropolitan Area Network Application –– MAC-based Access Control List (ACL)
Recovery Time < 10ms
–– Time-based ACL
10G • DHCP snooping to filter distrusted DHCP messages
• Dynamic ARP Inspection discards ARP packets with
SGS-5240-24P4X
10G
Enterprise Branch invalid MAC address to IP address binding
• IP Source Guard prevents IP spoofing attacks

SGS-5240-24T4X
Enterprise Branch

2
 SGS-5240 series

Layer 3 IPv4 and IPv6 VLAN Routing for Secure and Flexible Management • IP address access management to prevent unauthorized
The SGS-5240 series supports IPv4/IPv6 VLAN routing feature which allows to intruder
cross over different VLANs and different IP addresses for the purpose of having a

highly-secure, flexible management and simpler networking application. Management

• IPv4 and IPv6 dual stack management
Strong Multicast
• Switch Management Interfaces
The SGS-5240 series supports abundant multicast features. In Layer 2, it features
–– Console and Telnet Command Line Interface
IPv4 IGMPv1/v2/v3 snooping and IPv6 MLD v1/v2 snooping. With Multicast VLAN –– HTTP web switch management
Register (MVR), multicast receiver/sender control and illegal multicast source –– SNMP v1 and v2c switch management
detection functions, the SGS-5240 series provides great application experience –– SSHv2, SSLv3 and SNMP v3 secure access

for customers. • SNMP Management

–– Four RMON groups (history, statistics, alarms, and
Robust Layer 2 Features events)
The SGS-5240 series can be programmed for basic switch management functions –– SNMP trap for interface Link Up and Link Down
notification
such as port speed configuration, port aggregation, VLAN, Multiple Spanning Tree
• Built-in Trivial File Transfer Protocol (TFTP) client
Protocol and bandwidth control. This switch provides 802.1Q tagged VLAN, Q-in-Q,
• BOOTP and DHCP for IP address assignment
voice VLAN and GVRP Protocol functions. By supporting port aggregation, the SGS-
• System Maintenance
5240 series allows the operation of a high-speed trunk combined with multiple ports.
–– Firmware upload/download via HTTP
MSTP LACP –– Reset button for system reboot or reset to factory

Q-in-Q QoS LLDP default

MLD IGMP
–– Dual images
• DHCP Functions:
L2/L4 L2/L4
Managed Switch Managed Switch –– DHCP Relay
Powerful Network Security –– DHCP Option 82

The SGS-5240 series offers comprehensive Layer 2 to Layer 4 Access Control List • User Privilege levels control

(ACL) for enforcing security to the edge. It can be used to restrict network access • Network Time Protocol (NTP) and SNTP
• Network Diagnostic
by denying packets based on source and destination IP address, TCP/UDP ports
–– SFP-DDM (Digital Diagnostic Monitor)
or defined typical network applications. Its protection mechanism also comprises
–– Cable diagnostic technology provides the mechanism
802.1x Port-based, MAC-based and web-based user and device authentications.
to detect and report potential cabling issues
–– ICMPv6/ICMPv4 remote ping
Advanced IP Network Protection
• Syslog remote alarm
The SGS-5240 series also provides DHCP Snooping, IP Source Guard and
• System Log
Dynamic ARP Inspection functions to prevent IP snooping from attack and discard

ARP packets with invalid MAC address. The network administrators can now
Power over Ethernet (SGS-5240-24P4X)
construct highly-secure corporate networks with considerably less time and effort
• Complies with IEEE 802.3at Power over Ethernet Plus
than before. • Up to 24 ports of IEEE 802.3at PoE devices powered
• Auto detects powered device (PD)
Efficient and Secure Management
• Circuit protection prevents power interference between
For efficient management, the SGS-5240 series is equipped with console, Web and
ports
SNMP management interfaces.
• Remote power feeding up to 100 meters
• PoE management
–– Total PoE power budget control
–– Per port PoE function enable/disable
–– PoE port power feeding priority
–– PD classification detection

SGS-5240 Series

3
 SGS-5240 series

■ With the built-in Web-based management interface, the SGS-5240 series offers an easy-to-use, platform-independent management and configuration

facility.

■ For text-based management, it can be accessed via Telnet and the console port.

■ For standard-based monitor and management software, it offers SNMPv3 connection which encrypts the packet content at each session for secure

remote management.

Moreover, the SGS-5240 series offers secure remote management by supporting SSHv2 and SSLv3 connection which encrypts the packet content at

each session.

SGS-5240 Series
01010101010110010101010100010101010
01010101010110010101010100010101010
01010101010110010101010100010101010

Computer

SSL SSH SNMPv3

Intelligent SFP Diagnosis Mechanism

The SGS-5240 series supports SFP-DDM (Digital Diagnostic Monitor) function that greatly helps network administrator to easily monitor real-time parameters

of the SFP and SFP+ transceivers, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage.

Digital Diagnostic Monitor (DDM)

Voltage

6
4 8

2 10
Ammeter

0 12 30

V
20 40

10 50

0 60

mA
Temperature

50

25 75

0 100

°C

0
-20 20

-40 40

-60 60

dBm
0
-20 20

-40 40

-60 60

Power Transmitter
dBm

Power Receiver

4
 SGS-5240 series

Applications
High Availability Mesh Networking Solution for Big Data System
By means of improving the technology of Optical Fiber Ethernet with highly-flexible, highly-extendable and easy-to-install features, the SGS-5240 series offers

up to 128/176Gbps data exchange speed via Optical Fiber interface and the transmission distance can be extended to 120km.

The SGS-5240 series features strong, rapid, self-recovery capability to prevent interruptions and external intrusions. It incorporates IEEE 802.1s MSTP (Multiple

Spanning Tree Protocol, spanning tree by VLAN) into customer’s automation network to enhance system reliability and uptime. The SGS-5240 series is the

ideal solution for data centers, service providers and telecoms to build redundant connection and establish high bandwidth for Big Data server farm.

Excellent Solution to Core/Data Center Security and QoS Switch

The SGS-5240 series performs 128/176Gbps non-blocking switch fabric so it can easily provide a local 10Gbps high bandwidth Ethernet network for the

backbone of your department. With the four built-in SFP+ ports, the SGS-5240 series provides the uplink to the backbone network through the 10G Ethernet

LR/SR SFP+ modules. It further improves the network efficiency and protects the network clients by offering the security and QoS features.

Layer 3 VLAN Routing

With the built-in robust Layer 3 traffic routing protocols, the SGS-5240 series ensures reliable routing between VLANs and network segments. The routing

protocols can be applied via VLAN interface. The SGS-5240 series is certainly a cost-effective and ideal solution for enterprises.

VLAN Routing + 10G Uplink Applications

17F
l.: F
in
VL ance D
AN
100 epartm
Do e 20F
ma nt l.: S
in B al
192 VL es De
450m AN p
. 300 artme
1000

168
.10 Do nt
.x/2 ma
4 in A
1000 550m 192
.16
8.3
0.x
/24

10G
1000
NA
S 200m
Co Ser Stora
ntro ver ge
l Ce Ra
VL nte ck
AN r
1D
om
ain
192 4Fl
.16 .: M
8.0 K
.x SGS-5240 Series VL T Dep
AN a
200 rtmen
Do t
ma
in C
192
.16
8.2
0.x
1000 1000BASE-SX/LX Fiber Optic /24
10G 10GBASE-SR/LR Fiber Optic

5
 SGS-5240 series

Specifications
Product SGS-5240-24T4X SGS-5240-24P4X SGS-5240-20S4C4XR SGS-5240-48T4X
Hardware Specifications
10/100/1000BASE-T RJ45 Ports 24 24 4 (combo) 48
1000BASE-X SFP Slots - - 20+4 -
4 10GBASE-SR/LR SFP+ interfaces
10GBASE-X SFP+ Slots
Compatible with 1000BASE-SX/LX/BX SFP transceiver
Console 1 x RJ45-to-RS232 serial port (115200, 8, N, 1)
CPU ARM A9 800MHz
RAM 512Mbytes
Flash Memory 64Mbytes
Dimensions (W x D x H) 440 x 280 x 44 mm 440 x 280 x 44 mm 440 x 280 x 44 mm 440 x 330 x 44 mm
Weight 3.0 kg 4.1 kg 3.3 kg 4.0 kg
Power Consumption 21 watts/71.65 BTU 432 watts/1474 BTU 43 watts/146.72 BTU 45 watts/153.55 BTU
Power Requirements - AC AC 100~240V, 50/60Hz AC 100~240V, 50/60Hz AC 100~240V, 50/60Hz AC 100~240V, 50/60Hz
Power Requirements - DC - - DC 36-72V -
Fan - 2 1 1
Switching
Switch Architecture Store-and-forward
Switch Fabric 128Gbps/non-blocking 128Gbps/non-blocking 128Gbps/non-blocking 176Gbps/non-blocking
Switch Throughput 95.23Mpps 95.23Mpps 95.23Mpps 130.95Mpps
Address Table 16K MAC address table with auto learning function
ARP Table 1024
ACL Table 900
Shared Data Buffer 1.5MB
Jumbo Frame 9KB
Back pressure for half duplex
Flow Control
IEEE 802.3x pause frame for full duplex
Power over Ethernet Specifications
IEEE 802.3at Power over
Ethernet Plus PSE
PoE Standard - - -
Backward compatible with
IEEE 802.3af PoE
PoE Power Supply Type - End-span - -
Per port 54V DC,
PoE Power Output - - -
maximum 30 watts
Power Pin Assignment - 1/2(+), 3/6(-) - -
PoE Power Budget - 370 watts (max.) - -
Layer 3 Functions
IP Interfaces Max. 32 VLAN interfaces
IPv4 256 entries
Routing Table
IPv6 128 entries
IPv4 hardware static routing
Routing Protocols
IPv6 hardware static routing
Layer 2 Functions
Port disable/enable
Auto-negotiation 10/100/1000Mbps full and half duplex mode selection
Port Configuration
Flow control disable/enable
Port loopback detect
Port Status Display each port’s speed duplex mode, link status, flow control status and auto negotiation status
TX/RX/Both
Port Mirroring Remote port mirror (RSPAN)
Many-to-1 monitor
IEEE 802.1Q tagged based VLAN, up to 4K VLAN groups
IEEE 802.1ad Q-in-Q VLAN stacking/tunneling
IEEE 802.1v Protocol-based VLAN
Port-based VLAN
VLAN
MAC-based VLAN
IP Subnet-based VLAN
Voice VLAN
GVRP for VLAN management, up to 256 VLAN

6
 SGS-5240 series

IEEE 802.1D Spanning Tree Protocol (STP)

IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
IEEE 802.1s Multiple Spanning Tree Protocol (MSTP)
Spanning Tree Protocol
BPDU Guard, BPDU filtering and BPDU transparent
Root Guard
STP-based loopback detection
IPv4 IGMP v1/v2/v3 snooping
IPv4 Querier mode support
IGMP Filtering and IGMP Throttling
IGMP Proxy reporting
Multicast IGMP mroute-forward mode
Up to 255 multicast groups
IPv6 MLD v1/v2 snooping
Up to 255 multicast groups
Multicast VLAN Register (MVR), supports 5 multicast VLANs
IEEE 802.3ad Ling Aggregation Control Protocol (LACP)
Static trunk link aggregation
Supports 26 groups with 8 ports per trunk group
Link Aggregation Up to 80Gbps bandwidth (full duplex mode)
Load Balance Algorithm:
- Source IP/destination IP/Source + destination IP
- Source MAC/destination MAC/Source + destination MAC
Broadcast/Multicast/Unicast storm control
Storm Control
Rate: 64Kbpss-10,000Mbps
Input/Output/Both
Per port bandwidth control
Bandwidth Control
Gigabit port: 64Kbpss-1,000Mbps
10Gigabit port: 64Kbpss-10,000Mbps
8 priority queues on all switch ports
Scheduling for priority queues
- Weighted Round Robin (WRR)
- Strict priority
- Hybrid (DRR/WRR + strict)
QoS
Traffic classification:
- IEEE 802.1p CoS/DSCP/IP Precedence
- VLAN ID
- ACL
- Policy-based ingress and egress QoS
Ring ITUT G.8032 ERPS v1 and v2
Security Functions
Supports Standard and Expanded ACL
- P-based ACL
- MAC-based ACL
- ARP ACL
- Time-based ACL
ACL based on:
- MAC Address
Access Control List
- IPv4/IPv6 IP Address
- Ethertype
- Protocol-number/UDP
- sport/dport
- DSCP
- 802.1p Priority
Up to 900 entries
Port security
Supports static MAC + port binding
Defend against DoS or TCP attacks
Security DHCP Snooping, DHCP Option 82
IP source guard
Dynamic ARP inspection
Command line authority control based on user levels
RADIUS client
AAA
TACACS+ client

7
 SGS-5240 series

IEEE 802.1x port-based network access control

MAC-based authentication
Network Access Control
Web authentication
Local/RADIUS authentication
Management Functions
Console and Telnet
System Configuration Web browser
SNMP v1, v2c
IPv4/IPv6 SSHv2, SSLv3, SNMPv3
Secure Management Interfaces
Maximum 8 sessions for SSH and telnet connection
IPv4 and IPv6 dual stack management
SNMP MIB and TRAP
SNMP RMON 1, 2, 3, 9 four groups
Firmware upgrade by HTTP/TFTP/FTP protocol through Ethernet network
Configuration upload/download through HTTP/TFTP/FTP protocol
System Management
Supports dual images and multiple configuration files
Supports IEEE 802.1ab LLDP protocol
NTP/SNTP client
RADIUS authentication for IPv4/IPv6 login user name and password
Security IP safety net management function: avoid unlawful landing at nonrestrictive area
Remote Syslog
Event Management System log
SMTP
IP Clustering 16 members
SGS-5240-24T4X
SGS-5240-24P4X
IP Clustering Compatibility List
SGS-5240-20S4C4XR
SGS-5240-48T4X
6 members max.
Hardware Stacking
Last 2 10G SFP+ slots are functioned as Stacking Up and Down interfaces
Hardware Stacking Compatibility List Require the same models for hardware stacking
RFC 1213 MIB-II
RFC 1215 Internet Engineering Task Force
RFC 1271 RMON
RFC 1354 IP-Forwarding MIB
RFC 1493 Bridge MIB
RFC 1643 Ether-like MIB
RFC 1907 SNMP v2
RFC 2011 IP/ICMP MIB
RFC 2012 TCP MIB
RFC 2013 UDP MIB
SNMP MIBs
RFC 2096 IP forward MIB
RFC 2233 if MIB
RFC 2452 TCP6 MIB
RFC 2454 UDP6 MIB
RFC 2465 IPv6 MIB
RFC 2466 ICMP6 MIB
RFC 2573 SNMP v3 notify
RFC 2574 SNMP v3 vacm
RFC 2674 Bridge MIB Extensions (IEEE 802.1Q MIB)
RFC 2674 Bridge MIB Extensions (IEEE 802.1P MIB)
Standard Conformance
Regulatory Compliance FCC Part 15 Class A, CE

8
 SGS-5240 series

IEEE 802.3 10BASE-T

IEEE 802.3u 100BASE-TX
IEEE 802.3z Gigabit 1000BASE-SX/LX
IEEE 802.3ab Gigabit 1000BASE-T
IEEE 802.3ae 10Gb/s Ethernet
IEEE 802.3x flow control and back pressure
IEEE 802.3ad port trunk with LACP
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1w Rapid Spanning Tree Protocol
IEEE 802.1s Multiple Spanning Tree Protocol
IEEE 802.1p Class of Service
IEEE 802.1Q VLAN tagging
IEEE 802.1ad Q-in-Q VLAN stacking/tunneling
Standards Compliance IEEE 802.1v Protocol-based VLAN
IEEE 802.1X port authentication network control
IEEE 802.1ab LLDP
RFC 768 UDP
RFC 793 TFTP
RFC 791 IP
RFC 792 ICMP
RFC 2068 HTTP
RFC 1112 IGMP v1
RFC 2236 IGMP v2
RFC 3376 IGMP v3
RFC 2710 MLD v1
FRC 3810 MLD v2
ITU-T G.8032 ERPS Ring
Environments
Temperature: 0 ~ 50 degrees C
Operating
Relative Humidity: 5 ~ 90% (non-condensing)
Temperature: -10 ~ 70 degrees C
Storage
Relative Humidity: 5 ~ 90% (non-condensing)

Ordering Information
SGS-5240-24T4X Layer 2+ 24-Port 10/100/1000T + 4-Port 10G SFP+ Stackable Managed Switch
SGS-5240-24P4X Layer 2+ 24-Port 10/100/1000T 802.3at PoE + 4-Port 10G SFP+ Stackable Managed Switch
Layer 2+ 20-Port 100/1000X SFP + 4-Port Gigabit TP/SFP + 4-Port 10G SFP+ Stackable Managed Switch with
SGS-5240-20S4C4X4XR
48V redundant power
SGS-5240-48T4X Layer 2+ 48-Port 10/100/1000T + 4-Port 10G SFP+ Stackable Managed Switch

Available Modules
10Gigabit Ethernet Transceiver (10GBASE-X SFP+)

Model Speed (Mbps) Connector Interface Fiber Mode Distance Wavelength (nm) Operating Temp.
MTB-RJ 10G Copper -- 30m -- 0 ~ 70 degrees C
MTB-SR 10G LC Multi Mode 300m 850nm 0 ~ 60 degrees C
MTB-LR 10G LC Single Mode 10km 1310nm 0 ~ 60 degrees C
MTB-TSR 10G LC Multi Mode Up to 300m 850nm -40 ~ 75 degrees C
MTB-TLR 10G LC Single Mode 10km 1310nm -40 ~ 75 degrees C

10Gbps SFP+ (10GBASE-BX, Single Fiber Bi-directional SFP)

Model Speed (Mbps) Connector Interface Fiber Mode Distance Wavelength (TX) Wavelength (RX) Operating Temp.
MTB-LA20 10G WDM(LC) Single Mode 20km 1270nm 1330nm 0 ~ 60 degrees C
MTB-LB20 10G WDM(LC) Single Mode 20km 1330nm 1270nm 0 ~ 60 degrees C
MTB-LA40 10G WDM(LC) Single Mode 40km 1270nm 1330nm 0 ~ 60 degrees C
MTB-LB40 10G WDM(LC) Single Mode 40km 1330nm 1270nm 0 ~ 60 degrees C
MTB-LA60 10G WDM(LC) Single Mode 60km 1270nm 1330nm 0 ~ 60 degrees C
MTB-LB60 10G WDM(LC) Single Mode 60km 1330nm 1270nm 0 ~ 60 degrees C

9
 SGS-5240 series

Gigabit Ethernet Transceiver (1000BASE-X SFP)

Model Speed (Mbps) Connector Interface Fiber Mode Distance Wavelength (nm) Operating Temp.
MGB-GT 1000 Copper -- 100m -- 0 ~ 60 degrees C
MGB-SX 1000 LC Multi Mode 550m 850nm 0 ~ 60 degrees C
MGB-SX2 1000 LC Multi Mode 2km 1310nm 0 ~ 60 degrees C
MGB-LX 1000 LC Single Mode 10km 1310nm 0 ~ 60 degrees C
MGB-L40 1000 LC Single Mode 40km 1310nm 0 ~ 60 degrees C
MGB-L80 1000 LC Single Mode 80km 1550nm 0 ~ 60 degrees C
MGB-L120 1000 LC Single Mode 120km 1550nm 0 ~ 60 degrees C
MGB-TSX 1000 LC Multi Mode 550m 850nm -40 ~ 75 degrees C
MGB-TLX 1000 LC Single Mode 10km 1310nm -40 ~ 75 degrees C
MGB-TL40 1000 LC Single Mode 40km 1310nm -40 ~ 75 degrees C
MGB-TL80 1000 LC Single Mode 80km 1550nm -40 ~ 75 degrees C
MGB-L120(V2) YES 1000 LC Single Mode 120km 0 ~ 60 degrees C

Gigabit Ethernet Transceiver (1000BASE-BX, Single Fiber Bi-directional SFP)

Model Speed (Mbps) Connector Interface Fiber Mode Distance Wavelength (TX) Wavelength (RX) Operating Temp.
MGB-LA10 1310nm 1550nm
1000 WDM(LC) Single Mode 10km 0 ~ 60 degrees C
MGB-LB10 1550nm 1310nm
MGB-LA20 1310nm 1550nm
1000 WDM(LC) Single Mode 20km 0 ~ 60 degrees C
MGB-LB20 1550nm 1310nm
MGB-LA40 1310nm 1550nm
1000 WDM(LC) Single Mode 40km 0 ~ 60 degrees C
MGB-LB40 1550nm 1310nm
MGB-LA60 1310nm 1550nm
1000 WDM(LC) Single Mode 60km 0 ~ 60 degrees C
MGB-LB60 1550nm 1310nm
MGB-TLA10 1310nm 1550nm
1000 WDM(LC) Single Mode 10km -40 ~ 75 degrees C
MGB-TLB10 1550nm 1310nm
MGB-TLA20 1310nm 1550nm
1000 WDM(LC) Single Mode 20km -40 ~ 75 degrees C
MGB-TLB20 1550nm 1310nm
MGB-TLA40 1310nm 1550nm
1000 WDM(LC) Single Mode 40km -40 ~ 75 degrees C
MGB-TLB40 1550nm 1310nm
MGB-TLA60 1310nm 1550nm
1000 WDM(LC) Single Mode 60km -40 ~ 75 degrees C
MGB-TLB60 1550nm 1310nm

PLANET Technology Corporation SGS-5240 series

11F., No.96, Minquan Rd., Xindian Dist., New Taipei City 231,
Taiwan (R.O.C.)
PLANET reserves the right to change specifications without prior notice. All brand names and trademarks are property of
Tel: 886-2-2219-9518 Fax: 886-2-2219-9528 their respective owners. Copyright © 2020 PLANET Technology Corp. All rights reserved.
Email: [email protected] www.planet.com.tw
10