Scribd
Upload
212 views2 pages

Altimeter - Test Report

This document summarizes the test report for an altimeter. It outlines various tests performed on the altimeter including [1] barometric scale error tests to check accuracy at different altitudes and barometric pressures, [2] a case leakage test to check for pressure leaks, and [3] position error, friction error, and hysteresis tests to evaluate performance under different conditions. The results of each test are recorded to validate that the altimeter is functioning properly within specified tolerances.

Uploaded by

Sani Ihsan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
212 views2 pages

Altimeter - Test Report

This document summarizes the test report for an altimeter. It outlines various tests performed on the altimeter including [1] barometric scale error tests to check accuracy at different altitudes and barometric pressures, [2] a case leakage test to check for pressure leaks, and [3] position error, friction error, and hysteresis tests to evaluate performance under different conditions. The results of each test are recorded to validate that the altimeter is functioning properly within specified tolerances.

Uploaded by

Sani Ihsan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 2

SBU-Merpati Maintenance Facility

AMO # 145 / 9300

ALTIMETER – TEST REPORT


TYPE / PART NO. : DATE : / /
SERIAL NO : REFERENCE :

A. TEST CONDITION. Result : ________________________________


1. Standar atmosphere : the ICAO standard H. ACCURACY – SCALE ERROR TEST
atmosphere is used as reference.
Std. Altitude Tolerance ALT. Reading
2. Test temperature : 20 deg.C ± 5C.
(Feet) ± Feet (Feet)
3. Test position:normal operating/vertical position.
4. Barometric setting : 1013.25mbar / 29.92”Hg. - 1.000 20
0 20
B. BAROMETRIC - SCALE ERROR TEST 500 20
Baro - Setting Altitude Tol ALT 1.000 20
(Mb.) (inHG) Difference (Ft) (Ft) Reading 1.500 25
2.000 30
821.2 24.25 -5.701 30
3.000 30
846.6 25.00 -4.880 30
4.000 35
945.5 27.92 -1.903 25
6.000 40
949.0 28.91 - 948 25
8.000 45
1013 29.92 0 10
10.000 50
1030 30.44 + 476 25
12.000 55
1048 30.96 + 947 25
14.000 60
16.000 65
C. CASE LEAKEGE TEST
18.000 70
Apply pressure to 18.000feet than isolated, After 20.000 75
1 minute check the leakage not more than 100 Ft. 22.000 85
Result : _________________________________ 24.000 90
26.000 95
D. POSITION ERROR TEST 28.000 100
Altimeter position Tolerance Altimeter Reading 30.000 105
Normal Operating At each 500 Feet Setting 32.000 110
90 deg.cw position 35.000 115
180 deg.cw not more 40.000 125
270 deg.cw than : 45.000 140
Dial face upword 20 feet. 50.000 150

E.LIGHTING TEST ( if applicable) I. HYSTERESIS and AFTER EFFECT (*)TEST


Result : ________________________________ Altitude Vertical Time-Held Tol Altitude
(Feet) Speed (min) (Ft) Hys.Error
F. FRICTION ERROR TEST 25,000 5,000 5 75
Altitude Vertical Tolerance Friction 20,000 5,000 5 75
(Feet) Speed (Fpm) VIB OFF Error (Ft) 0* 3,000 1 30
1,000 500 70
J. RECORDS
3,000 500 70
5,000 500 70 Record on the altimeter the date and maxi-
10,000 3,000 80 mum altitude to which the altimeter has been
20,000 3,000 100 tested.
30,000 3,000 140 Result : _________________________________

G. ENCODING TEST ( if applicable)


-------------------------------------------------------------------------------------

FORM NO. : F02 – 0508 PAGE : 1 OF 1


TESTED BY

You might also like