Bill of Quantities

Measu
Item Grou Item Total
Description of Item remen Quantity Unit Price
no. p Code Price
t Unit
A. Civil Works of Building including Inspection Pit and Septic tank (All the items include VAT
A. N/A N/A & profit) : N/A 0.001 0.001 0
Perform soil test and submission of sub-soil investigation report as per following
specifications and instructions of Engineer in charge. (All cost included Mobilization &
demobilization of materials required for performing tests at different primary schools under
the package.) a) The soil test must be performed by a reputated/standard exploratory farm
(to be approved by concern Procuring Entity) and the submitted report duly signed by
competent/authorised engineer. b) Exploratory borings and/ or by CPT, DCP etc. collecting
and necessary testing of samples in numbers as required for Stratification of Layers, physical
parameters of soils like- Atterberg limits,Specific Gravity, Grain size distribution(by wet
seive, Hydrometer if required) ,shrinkage & swelling, Settlement ; C -? values and other
Strength parameters to ascertain Bearing Capacity , Skin friction, End bearings etc at layers
of interest as per respective National/International standards. c) Preparation of Standard
sub-soil investigation Report (4 sets) containing necessary Tables & Graphs prepared from
the collected data and information of soil sample. d) Minimum 2 bore-holes for each school
up to depth 0m to 20m will be required. e) The test must be performed in presence of the Each
1 N/A N/A reprentative of DPHE (AE/SAE), representative of Primary school (Head teacher/Asstt. School 8 28143.7 225149.6
Providing Site preparation, Layout and demarcating lines, existing ground level (EGL),
formation ground level (FGL), highest flood level (HFL), plinth level (PL). Setting and marking
all pillars, markers, pegs etc. showing and maintaining reduced levels (RLs) including
locating, establishing, protecting all public utilities within the premise of work and finally all
to be presented in black and white etc. All complete as per direction and guidance of the
2 N/A N/A Engineer in Charge. LS 8 3115.431 24923.45

Earth work in excavation in all kinds of soil for foundation trenches including layout,
providing center lines, bench-mark pillars, leveling, ramming and preparing the base, fixing
bamboo spikes & making layout with chalk powder providing necessary tools and plants,
protecting and maintaining the trench dry etc., stacking, cleaning the excavated earth at a
safe distance out of the area enclosed by the layout etc. All complete and accepted by the
Engineer, subject to submit method statement of carrying out cxcavation work to the
Engineer for approval. However, Engineer`s approval shall not relieve the contractor of his
responsibilities and obigations under the contract. Earthwork in excavation in foundation
3 N/A N/A trenches any depth and maximum 10m lead: in all type of soil. m3 690.32 95.631 66015.99
Earth filling in foundation trenches and plinth in 150 mm layer with earth available within 90
m of the building site to achive minimum dry density of 95% with optimum moisture content
(Modified proctor test) including carrying, watering, leveling, dressing and compacting to a
specified percentage each layer up to finished level etc. all complete and accepted by
4 N/A N/A Engineer-in-charge. m3 291.28 107.624 31348.72
Sand filling in foundation trenches and plinth with sand having minimum F.M. 1.2 in 150 mm
in layers including leveling, watering and compaction to achieve minimum dry density of
95% with optimum moisture content (Modified proctor test) by ramming each layer up to
finished level as per design supplied by the design office only, all complete and accepted by
5 N/A N/A the Engineer-in-charge. m3 173.2 984.665 170544
One layer brick flat soling in foundation or in floor with first class/picked jhama bricks
including preparation of bed and filling the interstices with local sand, leveling etc. complete
6 N/A N/A and accepted by the Engineer-in-charge. m2 406.88 335.145 136363.8
Supplying and laying of single layer polythene sheet weighing one kilogram per 6.5 square
meter in floor or any where below cement concrete complete in all respect and accepted by
7 N/A N/A Engineer-in-charge. m2 406.88 32.098 13060.03

Mass concrete (1:2:4) in foundation or in floor with cement, sand (F.M. 1.2) and picked
jhama brick chips including breaking of chips, screening, mixing, laying, compacting to
required level and curing for at least 7 days including the supply of water, electricity, costs of
tools & plants and other charges etc. all complete and accepted by Engineer-in-charge.
(Cement: CEM-II/A-M) Mass concrete in foundation (1:2:4) with brick chips and local sand of
8 N/A N/A F.M. 1.2. Mass concrete in floor (1:2:4) with brick chips and local sand of F.M. 1.2. m3 21.28 6956.392 148032

250 mm & above thick brick work with 1st class bricks in cement morter (1:4)with Sand (F.M.
1.2) for foundation,plinth and superstructure and Septic tank filling the interistices fully with
morter and soaking the bricks at least for 24 hours before use and curing at least for 7 days
9 N/A N/A etc.all complete as per direction of the Engineer in charge. m3 169.84 6000.649 1019150
 125 mm brick works with first class bricks with cement sand (F.M. 1.2) mortar (1:4) and
making bond with connected walls including necessary scaffolding, raking out joints,
cleaning and soaking the bricks for at least 24 hours before use and washing of sand, curing
at least for 7 days in all floors including cost of water, electricity and other charges etc. all
10 N/A N/A complete and accepted by the Engineer-in-charge. m2 847.36 801.377 679054.8

Supplying, fitting and fixing homogeneous floor tiles (local made) ( RAK/FU-WANG /AKIJ)
with cement sand (F.M 1.8) mortar (1:3) base and raking out the joints with white cement
including cutting and laying the tiles in proper way and finishing with care etc. all complete
11 N/A N/A and accepted by the Engineer in charge. Homogeneous 300 x 300 mm floor tiles m2 310.24 1373.622 426152.5

Supplying, fitting and fixing wall tiles (local made) ( RAK/FU-WANG /AKIJ) with on 20 mm
thick cement sand (F.M. 1.2) mortar (1:3) base and raking out the joints with white cement
including cutting, laying and hire charge of machine and finishing with care etc. including
water, electricity and other charges complete all respect accepted by the Engineer in
12 N/A N/A charge. Coloured wall tiles of 250 X 300 mm size (7'-0'' height.) m2 835.92 1161.206 970675.3
Minimum 12mm thick cement sand (F.M. 1.5) Plaster (1:6) having with fresh cement to wall
both inner-and outer surface, finishing the corner and edges including washing of sand
cleaning the surface, scaffolding and curing at least for 7 days, cost of water, electricity and
other charges etc. all complete in all respect as per drawing and accepted by the Engineer in
13 N/A N/A charge. m2 1062.4 202.031 214637.7

Minimum 12mm thick cement plaster (1:4) with NCF having cement fineness min
2800cm2/g, initial setting time min 45 minutes, final setting time max 375 minutes, gypsum
<3% mixed with clinker, free from ash & any other foreign materials to give a minimum
cylinder crushing strength of 19Mpa for 7 (seven) days concrete from a machine mixed
typical batch with fresh cement (conforming to BDS 232) to dado and plinth wall upto
150mm below ground level with neat cement finishing in/c washing of sand, finishing the
edges and corners and curing at least for 7 days, cost of water, electricity & other charges
14 N/A N/A etc. all complete in all respect as per drawing and direction of the Engineer in charge. m2 621.84 232.241 144416.7

Minimum 6 mm thick cement sand (F.M 1.5) plaster (1:4) with fresh cement to ceiling R.C.C.
columns, beams, surface of stair case, sunshades, cornices, railings, drop wall, louvers, fins
and finishing the corners and edges including washing of sand cleaning the surface,
scaffolding and curing at least for 7 days, cost of water, electricity and other charges etc. all
15 N/A N/A complete in all respect as per drawing and accepted by the Engineer in charge. m2 523.2 175.597 91872.35
Reinforced cement concrete works using steel shutter, with minimum cement content
relates to mix ratio 1:2:4 having minimum f 'cr = 24 Mpa, and satisfying a specified
compressive strength f ?c= 19 Mpa at 28 days on standard cylinders as per standard practice
of Code ACI/BNBC/ASTM & cement conforming to BDS EN-197-1- CEM1, 52.5N (52.5MPa) /
ASTM-C 150 Type ? I, best quality sand [50% quantity of best local sand (F.M. 1.2) and 50%
quantity of Sylhet sand or coarse sand of equivalent F.M. 2.2] and 20 mm down well graded
picked jhama brick chips conforming ASTM C-33 including breaking chips and screening,
making, placing shutter in position and maintaining true to plumb, making shutter water-
tight properly, placing reinforcement in position; mixing in standard mixer machine with
hoper fed by standard measuring boxes, casting in forms, compacting by vibrator machine
and curing at least for 28 days, removing centering-shuttering after specified time approved;
including cost of water, electricity, additional testing charges of materials and cylinders
required by engineer, other charges etc. all complete approved and accepted by the
Engineer. (Rate is excluding the cost of reinforcement and its fabrication, placing and
16 N/A N/A binding etc) all complete in all respect as per drawing and accepted by the Engineer in N/A 0.001 0.001 0
16(a) N/A N/A a) 1:2:4 concrete for casting, lintel and slab etc. m3 202.72 8428.433 1708612
16(b) N/A N/A b) Steel Formwork/shuttering, steel prop necessary steel supports etc. m2 1670.64 322.435 538672.8
 Supplying, fabrication, and fixing to details as per design : Rabbed or Deformed Bar
Reinforcement for Reinforced Cement Concrete, produced and marked in accordance with
BDS ISO 6935 - 2: 2006 (or standard subsequently released from BSTI) including
straightening and cleaning rust, if any, bending and binding in position with supply of G.l.
wires, splices of laps what so ever etc. complete in all respects and accepted by the
Engineer. (Measurement shall be recorded only on Standard Mass per Unit length of Bars,
while, dia of bars exceeds its standard) Grade 400 ( RB 400 : complying BDS ISO 6935-
2:2006) ribbed or deformed bar produced and marked according to Bangladesh Standard
with minimum yield strength, fy (ReH)= 400MPa, but fy not exceeding 418MPa and what
ever is the yield strength within allowable limit as per BNBC sec 8.3.3.5/ACI 318-11 sec
21.1.5.2, the ratio of ultimate tensile strength fu to yield strength fy, shall be at least 1.25
and minimum elongation after fracture and minimum total elongation at maximum force is
17 N/A N/A 17% and 8% respectively. KG 26000 90.904 2363504
Manufacturing, supplying, fitting and fixing collapsible gate of any design and shape made of
20 mm x 20 mm x 3 mm M.S. angle placed @ 112 mm c/c vertically and connecting the
same with each other by 20 mm x 3 mm M.S flat bar scissors 525 mm/ 600 mm long
provided in 3 rows including cutting the different M.S. members to required sizes,
fabricating, welding, riveting with required size rivets, providing required size wheels, pulling
handles on both sides, suitable locking arrangement, electrodes, grease and finally placing
the same in position in between 2 (two) nos. 50 mm x 50 mm x 6 mm M.S. tee rail made by
welding 2 nos. 50 mm x 6 mm M.S. flat bar fitted and fixed at top and bottom with R.C.C.
lintel/roof slab, floors and side wall with required Nos. 150 mm to 225 mm long 38 mm x 6
mm M.S. flat bar clamps one end welded with the gate member and the other end
bifurcated and embedded in C.C. at the respective point including cutting holes and
mending good the damages by pouring concrete (1:2:4) into the holes and finishing, etc
complete, painting 2 (two) coats with approved best quality synthetic enamel paint over a
coat of anticorrosive painting, both end carriage, including greasing, electrodes, curing etc.
18 N/A N/A complete as per drawing and design and accepted by the Engineer-in-charge. (Rate is m2 41.6 2450.761 101951.7
Supplying, fitting and fixing M.S. door shutter made with 38 x 38 x 6 mm angle outer frame,
inner member 25x 6mm F.I.bar , cladding with 16 BWG M.S sheet, hinged with 50 X 50 X 6
mm M.S. angle Chowkat etc.complete in all respect as per design and direction of the
19 N/A N/A Engineer in charge. m2 98.08 3995.067 391836.2
Supplying, fitting and fixing 38 mm dia stainless steel pipe for Hand Rail including cutting,
20 N/A N/A bending, finishing etc. all complete as per direction of Engineer in charge. RM 23.2 242.925 5635.86
Supplying,fitting and fixing high window grill as per design made of mild steel F.I section (20
mm x 3 mm) with outer frame of (25 mm x 6 mm) F.I bar , fabricating,welding, cost of
electricity, workshop charges, carriage, fixing with pre-placed clamps in walls, all necessary
tools and plants as per design, drawing, specifications and direction of the Engineer in
21 N/A N/A charge. m2 123.44 1213.131 149748.9

Painting with plastic emulsion paint of best quality and approved colour in a seal container
from authorized manufacturer. Applying each coat and successive coat is to be applied as
per manufacturer special procedure, to wall and ceiling in two coats over a coat of priming
coat of water sealer and ready mixed putty of approved brand. It applied on sand papered
and cleaned surface and after drying applied sealer coat, 2 coats of ready mixed wall putty
of approved brand, each coat dried and smoothened by sand papering. Applying plastic
emulsion paint one vertical and one horizontal coat for each coat and successive coat is to
be applied after drying up of previous coat by brush/roller/spray in/c cleaning the plinth,
floors, doors, windows, portions and ventilators by washing, rubbing, as necessary and sand
papering the surface and necessary scaffolding, etc. curing for the requisite period etc. all
complete for all floors i/c cost of all materials as per direction of the E-I-C.
22 N/A N/A (BERGER/RAK/ELITE) m2 732 168.333 123219.8

Standard synthetic enamel paint of approved best quality and colour delivered from
authorized local agent of the manufacturer (Berger jhilik synthetic enamel/Elite quick
drying/Asian decora synthetic enamel or equivalent brand) in a sealed container, having
high water resistance, high bondibility, flexibility property; using specified brand thinner
applying to metallic or wooden surface by brass/roller/spray in 2 coats over single coat anti-
corrosive coating including cleaning, drying, making free from dirt, grease, wax, removing all
chalked and scaled materials, all complete in all floors and accepted by the Engineer-in-
23 N/A N/A charge. m2 443.28 250.001 110820.4
 38 mm thick Artificial Patent Stone (1:2:4) flooring with cement, best quality coarse sand
(100% quantity of sylhet sand of F.M. 2.2 ) and 12 mm down well graded stone chips, laying
the concrete in alternate panels, compacting and finishing the top with neat cement and
curing at least for 7 days in all floors including cost of water, electricity and other charges
24 N/A N/A etc. All complete and accepted by the Engineer. m2 210.8 374.104 78861.12
On exterior surface applying as per manufacturer instruction specific coat of weather coat of
approved qualityand colour delivered from authorized local agent of the manufacturer in a
sealed container. Applying one vertical and one horizontal coat for each coat and successive
coat is to be applied after drying up of previous coat by brush/roller/spray in/c cleaning,
washing, rubbing, as necessary and sand papering the surface and necessary scaffolding, etc.
all complete for all floors i/c cost of all materials as per direction of the E-I-C.
25 N/A N/A (BERGER/RAK/ELITE) m2 1339.68 178.737 239450.4

Apron of 300mm widthover one layer of brick flat soling. The surface having minimum
12mm thick cement sand (F.M.12) plaster (1.3) and net cement finiching with curing at sand
(F.M 0.8) consolidating and dressing cost of water, electricity, other charges etc.all complete
26 N/A N/A as per d and accepet by the Engineer in charge. m2 46.56 577.466 26886.82

Plaster rule pointing works 250mmx75mm size as brick shape by 10mmx10mm grove on
outside wall over minimum 12mm thick cement plaster (1:6) with Portland Composite
cement (CEM II/AM, 42.5N), best quality sand (minimum FM1.2), finishing the corners and
edges including washing of sand, cleaning the surfaces. caffolding and curing for requisite
27 N/A N/A period etc. all complete as per drawing and direction of the E-I-C. m2 335.84 199.802 67101.5
B. N/A N/A Sanitary & Plumbing Work's (All the items include VAT & profit) : N/A 0.001 0.001 0

B1. N/A N/A Sanitary Fittings with Fixures & Plumbing Work's (All the items include VAT & profit) : N/A 0.001 0.001 0
Supplying, fitting and fixing Bangladesh pattern, 570mm x 445mm x 290mm long pan with
foot-rest, approx 12 kg by weight, made of Vitreous China and preparing the base of pan
with cement motor (1:4) and with wire net of rods, if necessary in all floor including making
holes wherever required and mending good the damages and fitting , fixing, finishing etc.
complete with all necessary fittings and connection approved and accepted by the Engineer-
28 N/A N/A in-Charge. White (RAK/STELLA) Each 32 1320.121 42243.87

Supplying, fitting and fixing of European type Porcelin Low Down (RAK/STELLA/COTTO)
having a capacity of 8 litre and size 13,x7,x14, each. The Lowdowns to be installed in toilet
walls having long pans in it by nut bolts and angle clamps of thickness not lesser than 6mm.
The work includes 1.25, pvc pipe to be connected to Pan including making holes whereever
required and mending good the damages and fitting, fixing, finishing etc. All complete as per
29 N/A N/A direction and instruction by the Engineer-in-Charge. Color: White Each 32 2082.211 66630.75

Supplying, fitting and fixing of European type glazed porcelain combi closet, including plastic
seat cover, cistern system, preparing the base with cement concrete and with wire mesh or
rods if necessary, in all floors including making holes wherever required and mending good
the damages and fitting, fixing, finishing etc. complete with all necessary fittings and
connections approved and accepted by the Engineer- in- charge. STELLA/RAK/COTTO Color:
30 N/A N/A White Size: 700 x 410 x 795 mm Weight: 31.5 Kg. Each 16 5026.455 80423.28

Supplying, fitting and fixing glazed vitreous china flat or squatting urinal 610 x 375 x 85 mm
size, approx. 14 kg by weightwith flushing intel in cement mortal (1:4) with painted cast iron
body ,one gallon capacity , automatic flushing cistem in each group etc. including 12mm
brass controlling velve 32 mm dia PVC flush pipebrass controlling 12mm dia plastic lead
(connection) pipe including making goods the drams with 1:4 cement morter etc. all
31 N/A N/A complete approved and accepted by the Engineer-in-Charge.White (RAK/STELLA) Each 16 1037.635 16602.16

Supplying, glazed vitreous white colored Wash Basin 595 x 430 x 190 mm size, approx. 10 kg
by weight with Padastal including fitting, fixing the same in position with heavy type C.I.
Brackets. 30 mm dia PVC waste water pipe with brass coupling (not exceding 750 mm in
length), 12 mm plastic lead (connection) pipe with brass coupling, basin waste with chain
plug including making holes in walls and floors and fitting with wooden blocks, screws and
mending good the damages, finishing etc. all complete approved and accepted by the
32 N/A N/A Engineer-in-Charge. (RAK/STELLA) Each 32 2218.942 71006.14
Supplying, fitting and fixing medium best qualiy CP Piller cock etc. all complete as approved
33 N/A N/A and accepted by the Engineer. 12 mm CP medium quality piller cock Each 32 583.019 18656.61
Supplying, fitting and fixing best quality faucets etc. complete approved and accepted by the
34 N/A N/A Engineer in charge. 12 mm CP bib cock. Nos. 80 473.356 37868.48
 Supplying, fitting and fixing Special/Fancy quality CP concealed/Surface Angle stop cock etc.
complete approved and accepted by the Engineer in charge 12 mm CP surface mounted
35 N/A N/A angle stop cock (general) Each 48 547.621 26285.81
Supplying fitting and fixing 100mm dia uPVCTrap (Siphon or 'P' Trap) including making holes
in walls and floors and mending good the damages etc. all complete as per direction of the
36 N/A N/A Engineer-in-Charge. Each 32 138.814 4442.048

Supplying, fitting and fixing of 125 mm dia stainless steel floor Gratings in traps or in drains
with cement morter (1:4) including making holes in walls and floors and mending good the
37 N/A N/A damages etc. all complete as per direction of the engineer-in-Charge. Each 64 137.141 8777.024

Supplying, fitting and fixing of 450 x 350 mm size and 5 mm thick unframed super quality
mirror with hard boards at the back with all necessary filling including making holes in walls
and mending good the damages with cement mortar (1:4) etc. all complete approved and
38 N/A N/A accepted by the Engineer-in-Charge. (Made in Japan or equivalent) Each 32 431.017 13792.54
Supplying, fitting and fixing super quality 600 x 125 mm white glass (plate) shelf having 5
mm thickness with fancy C.P. brackets, screws and frames including making holes in walls
and mending good the damages with cement mortar (1:4) etc. all complete approved and
39 N/A N/A accepted by the Engineer-in-Charge. Each 32 478.214 15302.85
Supplying, fitting and fixing of eco friendly, fire retardant, moisture, termite and borer proof
uPVC non-shirnkable/ non-expandable Light peach colored cat door (2'-6, x 2'-4,) with frame
to be utilized below cabinet basin and top of false slab. All complete as per instruction of the
40 N/A N/A Engineer in charge. Each 32 1000.001 32000.03

Supplying, fitting and laying up to depth of invert 100mm inside dia best quality uPVC C-
grade pressure soil pipe having specific gravity 1.3-1.45, and other physical, chemical,
thermal, fire resistivity properties etc. as per BSTI approved manufacturer standards or
ASTM, BS/ISO/IS standards fitted and fixed in position with sockets, bends, with all
accessories such as Round grating/domed roof grating etc. all complete as per direction of
41 N/A N/A the Engineer-in-Charge. uPVC soil pipe 100 mm dia. wall thickness 2.7mm-3.4mm. RM 280 383.821 107469.9
Supplying 50 mm inside dia best quality uPVC waste and ventilation pipe having specific
gravity 1.35 - 1.45, wall thickness 2.5 mm - 3.0 mm, and other physical, chemical, themal,
fire resistivity properties etc. as per BSTI approved manufacturer standards or ASTM,
BS/ISO/IS standards fitting and fixing in position with sockets, bends, of uPVC Pipe with all
accessories such as Round grating /domed roof grating bands, sockets etc. approved and
42 N/A N/A accepted by the Engineer- in- charge. RM 24 309.555 7429.32
Supplying, fitting and fixing standard size soap tray including making holes in walls and
mending good the damages with cement mortar (1:4) etc. all complete approved and
43 N/A N/A accepted by the Engineer-in-Charge. CP soap tray Each 48 146.449 7029.552
Supplying and fitting-fixing of push shower in disabled toilet including holder etc. all
44 N/A N/A complete as per acceptance and approval of the Engineer in charge. Each 16 146.449 2343.184
Supplying, fitting and fixing of standard porcelain toilet paper holder of 150 mm x 150 mm x
126 mm size including making drills in walls and mending good the damages with cement
mortar (1:4) etc. all complete approved and accepted by the Engineer- in- charge. Light
45 N/A N/A Colored Each 48 350.001 16800.05
B2. N/A N/A Construction of Two Soak well N/A 0.001 0.001 0
a)RCC Ring for Soak well (inner dia. Of ring 750 mm, thickness 30 mm, height 300 mm, using
3-12 no. MS wire ) all complete as per DPHE National Sanitation Project design and as per
46(a) N/A N/A direction of the Engineer in Charge. Nos. 80 208.221 16657.68
b)RCC Slab for Soak well (dia. 900 mm, thickness 38 mm, using 10 no. MS wire of 0.65 kg) all
complete as per DPHE National Sanitation Project design and as per direction of the
46(b) N/A N/A Engineer in Charge. Nos. 16 277.628 4442.048
c)Earth work excavation, carrying, fitting & fixing of Soak well ring and slab at proper
position, earth filling, connection to the Litch pit (using 100 mm PVC pipe) etc. all complete
46(c) N/A N/A as per direction of the Enginner in charge. item 16 555.256 8884.096
d)Filling of soak well bottom by local sand (min. F.M. 0.8 & 75 mm thick) and Brick chips (75
mm thick) with proper compaction etc. all complete as per direction of the Engineer in
46(d) N/A N/A Charge. item 16 104.111 1665.776
B3. N/A N/A Other Sanitary Items N/A 0.001 0.001 0
(a) Supplying, fitting, fixing and placing plastic covered waste bin (Medium Size) as per
47(a) N/A N/A direction of Engineer in charge. Each 16 277.628 4442.048
(b) Supplying and placing of open waste plastic (RFL/Bengal/Partex) basket (Jhuri) to be used
47(b) N/A N/A in toilets. Each 48 41.644 1998.912

48 N/A N/A Supply of water pot (RFL/Bengal/standard quality) as per direction of Engineer in charge. Each 48 41.644 1998.912
 Supply of cleaning materials (Harpic/Finish/standard quality) 750 ml each as per direction of
49 N/A N/A Engineer in charge. Each 48 83.288 3997.824

50 N/A N/A Supply of cleaning brush (standard size and quality) as per direction of Engineer in charge. Each 48 69.407 3331.536
Supply of Bucket (RFL/Bengal/standard quality) as per direction of Engineer in charge (Each
51 N/A N/A 10 litre capacity). Each 16 138.814 2221.024
Supplying a lock (2.5, Tricle China, Brass colour or Pitol) to use in the collapsible gate as per
52 N/A N/A direction of the Engineer in charge. Each 16 312.332 4997.312

53 N/A N/A Supplying and placing of Coconut Fiber Matress (4'x10,) to be used on entrance stair step Each 16 347.035 5552.56
C. N/A N/A INTERNAL ELECTRIFICATION (All the items include VAT & profit) : N/A 0.001 0.001 0

CONCEALED CONDUIT WIRING Concealed conduit wiring supplying, fixing & fitting etc. all
complete for the following point looping at the switch board with earth terminal including
circuit wiring with 1C-2X1.5 sqmm PVC insulated cable (BYA) & 1.5 sqmm PVC insulated
green / white coloured ECC wire (BYA) through PVC conduit (Lira brand or equivalent
product of other reputed manufacturer) of minimum 25 mm dia & 1.5 mm wall thickness 18
SWG GP sheet, switch board and pull box with 3 mm thick ebonite sheet cover, 5 amps,
piano switch, ceiling rose, fixing materials etc. as required ( all electrical contacts shall be of
54 N/A N/A brass / copper) mending the damages goods. N/A 0.001 0.001 0
54(a) N/A N/A (a) 20mm dia, 1.5mm Thick PVC pipe for concealed conduit m 280 33.971 9511.88
(b) Double core bangladeshi standard quality insulated electric wire (3/20)
54(b) N/A N/A (Estern/BRB/Paradise) for internal connection m 280 39.078 10941.84
54(c) N/A N/A (c) Light point in/c holder Point 88 44.407 3907.816
54(d) N/A N/A (d) 26 Watt. Energy Saver Bulb (Phillips/ Energy Pack) Point 88 111.018 9769.584
54(e) N/A N/A (e) 2-pin 5 amp Socket point (outlet) with control switch on switch board Point 8 62.171 497.368
SP CIRCUIT BREAKER: Supplying, fixing & fitting etc. all complete on a prepared board 250V,
50 Hz, grade following single pole miniature circuit breaker (SPMCB) having minimum
breaking capacity 6 kA with thermal over current and instantaneous electromagnetic short
circuit release provision. with SPMCBs of AEG (Germany) Dorman Smith (England) MEM
(UK), SIEMENS / USA/ Germany or equivalent approved by the Engineering in charge. 5
55 N/A N/A Amps Nos. 16 406.324 6501.184

GANG SWITCH: Supplying ,fixing & fitting etc. all complete using 250 volts. 5 amps
(minimum) concealed type following switch / switch socket mounted on required size 18
SWG galvanized plain sheet board of 76.2 mm (3,) depth all electrical contact shall be brass /
copper gang switch of following brand & country of origin. (MK England or equivalent
56 N/A N/A product as approved by the Engineering in charge. 4 Gang switch Nos. 32 282.429 9037.728

Supply and wiring Electric wire (20) (Estern/BRB/Equivalent) for connection with electric
service from existing Main board to SDB including trial operation and commissioning etc. all
57 N/A N/A complete as per as per standard practice and accepted by the Engineer in charge. m 120 79.933 9591.96
D. N/A N/A Running water supply (Plumbing Works) N/A 0.001 0.001 0

Making plumbing line with special grade / thread uPVC pipe 'E' class all according to BS-
3505,1968 including supplying necessary clamps,screws, royal plug ,El-bow, bends, Tees etc.
58 N/A N/A all complete as per specifications and direction of the Engineer in charge. N/A 0.001 0.001 0
58(a) N/A N/A a)25 mm dia. m 80 39.966 3197.28
58(b) N/A N/A b)19 mm dia. m 360 31.085 11190.6
Supplying, fitting and fixing best quality G.I. gate valve with sealant etc. complete approved
59 N/A N/A and accepted by the Engineer in charge. 25 mm brass gate valve Nos. 8 221.408 1771.264
E. N/A N/A Others N/A 0.001 0.001 0
Inscribing (writing) the name of the Project and other necessary information in English on
outside front face of the WASH Block with approved quality Marble stone (Italian Karaka,
special quality), size 12,x18,, Thickness 15mm, color white and others according to the
60 N/A N/A direction of the Engineer-in-charge. Item 16 799.326 12789.22
10991700