Rexco 20 MSDS - Cleaned

Download as pdf or txt
Download as pdf or txt
You are on page 1of 3

Material Safety Data Sheet

MSDS
SECTION 1 PRODUCT IDENTIFICATION
Product name : REXCO 20 – Ultimate Hand Cleaner
Cross reference : Mechanic Hand Cleaner
Manufacture : PT. ALTAMA SURYA ANUGERAH
Address : Jl. Bandengan Utara 85A No. 4
Penjaringan-Penjaringan
JAKARTA UTARA 14440 – DKI JAKARTA RAYA
INDONESIA
Phone number : +62 21 6680180
Fax : +62 21 6691777

SECTION 2 HAZARDOUS INGREDIENTS


Chemical name : CAS Number Percent OSHA PEL
Aliphatic Solvent, hydrotreated : 64742-47-8 <30 300 ppm
Glycerin : 56-81-5 <3 10mg/m3
Propylene Glycol : 57-55-6 <3 0.34mg/m3TWA (skin)
Surfactant nonionic/cationic : N/A -- --

SECTION 3 HAZARDS IDENTIFICATION


Health Hazards May be harmful if ingested. . High Vapor may be irritation to eyes and
respiratory tract. See section 11 for further information
Physical Hazards Not detected.

SECTION 4 FIRST AID MEASURES


Emergency First Aid Procedures:
Eye contact : Irritant to eye, flush immediately with large amount of water for 15
minute, get medical attention.
Skin contact : In general situation, no irritant observed, If irritant occur, get medical
attention.
Inhalation : Remove to fresh air.
Ingestion : Call physician immediately, Don’t give anything to mouth
to unconscious person.

SECTION 5 FIRE FIGHTING MEASURES


EXTINGUISHING MEDIA : Foam, water spray(fog), dry chemical, and carbon dioxide. Water
spray can be used to cool and protect containers exposed to heat and flame.
SPECIFIC METHODS/ PROTECTION OF FIREFIGHTERS: Wear suitable protective equipment.
Hazardous product combustion : Oxide of carbon, oxide of nitrogen.
Mechanical Sensitivity : none reasonable foreseeable
Sensitivity to static discharge : Sensitivity to static discharge is not expected
Unusual Fire/Explosion Hazards : Does not sustain combustion ( ASTM D 4206)
Lower Explosive Limit : Not Determined
Upper Explosive Limit : Not Determined

SECTION 6 ACCIDENTAL REALEASE MEASURES


Spills may cause slippery floors. Prevent spill from entering drainage/sewer systems, waterways and
surface water. Notify local health authorities and other appropriate agencies if such contamination occurs.

1
Material Safety Data Sheet
MSDS
PERSONAL PRECAUTIONS: Personnel protective equipment must be worn (See Section 8). Minimize
contact with skin and clothing.

SECTION 7 HANDLING AND STORAGE


Keep out of reach of Children. Keep containers tightly closed in a cool, well-ventilated place. Store below
50 ºC. Do not allow freezing.

SECTION 8 EXPOSURE CONTROLS/PERSONAL PROTECTION


PERSONAL PROTECTIVE EQUIPMENT
RESPIRATORY PROTECTION: Not required under normal use
HAND PROTECTION: Use chemical-resistant gloves to avoid prolonged or repeated skin contact.
EYE PROTECTION: Wear chemical splash goggles with side shields or face shield.
SKIN AND BODY PROTECTION: Long sleeve shirt is recommended. Use of chemical-resistant apron or
other impervious clothing recommended. Chemically resistant boots are also recommended. Launder
clothing before reuse.
HYGIENE MEASURES: Minimize breathing vapor, mist or fumes. Avoid prolonged or repeated contact
with skin. Remove contaminated clothing; launder or dry-clean before reuse. Remove contaminated shoes
and thoroughly clean before reuse; discard if oil-soaked. Cleanse skin thoroughly after contact, before
breaks and meals, and at end of work period.

SECTION 9 PHYSICAL DATA


Flash Point : none
Freezing Point : 0 ºC
Boiling Point : 100ºC
Solubility in water : Soluble
Appearance & odor : Milky white -Viscous, fragrance
Spec Gravity : 0.95
pH : 5.49

SECTION 10 REACTIVITY DATA


Stability : Stable as long as container is tightly close and put in dry area
Incompatibility : Avoid contact with strong oxidizing material, avoid
contact with heat sources.
Hazardous Decomposition product : Oxides of carbon.
Hazardous polymerization : Will not occur.

SECTION 10 TOXICOLOGICAL INFORMATION


PRIMARY ROUTES OF ENTRY OR EXPOSURE: Skin absorption, eye contact, inhalation and ingestion.
INHALATION: Vapor concentrations above recommended exposure limits are irritating to the eyes and
respiratory tract. May cause headaches and dizziness, are anesthetic and may have other central nervous
system effects, including death based on data from components or similar materials.
SKIN: Slightly irritating to the skin. Prolonged and repeated contact may result in various skin disorders
such as dermatitis. Skin contact may aggravate existing dermatitis condition based on data from
components or similar products.
EYE: May cause eye irritation based on data from components or similar products.
INGESTION: Ingestion of material may result in vomiting; Aspiration (breathing of vomit us into the
lungs) must be avoided as even small quantities may result in aspiration pneumonitis. Ingestion may cause
irritation of the gastrointestinal lining, nausea, vomiting, diarrhea and abdominal pain.
ACUTE TOXICITY: Pre-existing skin and respiratory disorders may be aggravated by exposure.

2
Material Safety Data Sheet
MSDS
SECTION 12 ECOLOGICAL INFORMATION
STEPS TO BE TAKEN IF MATERIAL IS RELEASED OR SPILLED: Ventilate and remove with inert
absorbent. Pick up large spill with vacuum tracks or pump. Absorb small spills/leaks with oil absorbent.
Follow local and government regulation regarding disposal.

SECTION 13 DISPOSAL CONSIDERATIONS


WASTE DISPOSAL METHODS: Dispose in an environmentally safe manner and in accordance with
governmental regulations.

SECTION 14 TRANSPORTATION INFORMATION


Ground Transport ( DOT)
DOT Not Regulated
Hazards Class None
UN/ID number None
TRANSPORTATION INCIDENT INFORMATION: For further information relative to spills resulting
from transportation incidents, refer to latest Department of Transportation Emergency Response Guidebook
for Hazardous Materials Incidents.

SECTION 15 REGULATORY INFORMATION


SARA 302 Extremely Hazardous : None
TSCA Inventory Status : all components of this product are listed ( or exempt) on the EPA
TSCA inventory

SECTION 16 OTHER INFORMATION


Health 2, Flammability 0 ( propellant), Physical hazards 1, Personal protection B
The information and recommendation herein are, to the best of our knowledge and belief, accurate and
reliable as of the date issued. PT. ALTAMA SURYA ANUGERAH. does not warrant or guarantee their
accuracy or reliability, and shall not be liable for any loss or damage arising out of the use thereof. The
information and recommendations are offered for
the user's consideration and examination, and it is the user's responsibility to satisfy itself that they are
suitable and complete for its particular use.
______________________________________

You might also like