PH D - Brochure-1

I
II I.B. 2023-24 | Doctoral Programs (Ver 1.0)
INFORMATION BULLETIN
FOR ADMISSION IN VARIOUS

Ph.D. PROGRAMS
2023-24
Admission Helpdesk
Email:
[email protected]
[email protected]
दिल्ली कौशल एवं उद्यदिता दवश्वदवद्यालय

DELHI SKILL AND ENTREPRENEURSHIP UNIVERSITY
(A State University Established under Govt. of NCT of Delhi Act 04 of 2020)
Examination, Admission and Training Cell (EAT Cell)
DSEU Shakarpur Campus II, Delhi
Website: https://dseu.ac.in
दिल्ली सरकार
III I.B. 2023-24 | Doctoral Programs (Ver 1.0)
DISCLAIMER
The contents in the Index are on the basis of the policies of the University and the
Government as available as on this date of release of Information Bulletin for Admission in
the various Programmes for the Academic Session 2023–2024.
The information which is not available in the Information Bulletin and is received from the
Government of NCT of Delhi or any other statutory authority shall be uploaded on the
University website: www.dseu.ac.in. Therefore, all the candidates desirous of seeking
admission are hereby advised to regularly visit the University website www.dseu.ac.in to
update themselves with the additional updated information.
The contents of this Information Bulletin 2023-24 are subject to issue of any other
instructions received from the Govt. of NCT of Delhi or any of the statutory authorities
and any amendments in the instructions if deemed necessary. Terms and conditions
notified in this Information Bulletin 2023-24, and notified by the University from time to
time on the University website http://www.dseu.ac.in shall be binding on all candidates.
In case of any dispute, the decision of the Vice-Chancellor, Delhi Skill and
Entrepreneurship University, Delhi shall be final.
The Candidates must note that the Information Bulletin for Admission in Diploma,
Undergraduate, Post Graduate, and STC Programs will be published separately, and; the
details are available on University Website.
In case of any change in policy related to Admissions to Ph.D. programs for the Academic
Session 2023-24, no separate communication will be made to the candidates and the
same will be notified on the DSEU website (dseu.ac.in).
For any queries please mail: [email protected]
Candidates are advised to visit the DSEU website frequently for updates and the latest
information.
REGISTRATION FEE (Non-Refundable)
Rs. 900/-
Note:
- Please note that the Registration fee is non-refundable.
- One-time Registration Fee of Rs. 900/- is to be paid for online registration.
IV I.B. 2023-24 | Doctoral Programs (Ver 1.0)
Message from the Vice-Chancellor
Congratulations and a warm, enthusiastic welcome to the dynamic community of Delhi

Skill and Entrepreneurship University (DSEU)!
It is with immense pleasure that I extend my heartfelt greetings to both our new and
returning students. As the gates of DSEU swing open to usher you into our halls of
knowledge, innovation, and growth, I am filled with excitement for the journey that lies
ahead.
Here at DSEU, our unwavering commitment is to provide an exceptional, learner-centric

skill education that aligns seamlessly with the demands of our rapidly evolving world. Our
foremost aim is to equip each and every student with not only the tools, knowledge, and
skills necessary for personal and professional advancement but also the confidence to
take on the challenges of the modern era.
The meticulously designed curriculum across various academic programs at DSEU is

strategically crafted to ignite your potential, transforming you into catalysts for economic
and social change. We pride ourselves on fostering an environment where creativity,
innovation, and entrepreneurship flourish, enabling you to embark on a journey of self-
discovery and transformation.
Our esteemed faculty, dedicated staff, invaluable partners, and collaborative allies are
constantly pioneering ground breaking initiatives that redefine what's possible. As you
immerse yourself in the vibrant campus life at DSEU, you'll find a plethora of avenues to
showcase your unique talents, refine your abilities, form meaningful connections, and
collaborate closely within small, tightly-knit teams. These interactions will not only
facilitate your personal growth but also nurture enduring relationships with our
distinguished faculty and staff, setting you on a trajectory of lifelong learning.
DSEU presents you with an array of opportunities and benefits that are tailored to support
your aspirations, both within and beyond the academic realm. I am confident that your
journey with us will be richly rewarding, filled with moments of deep engagement and
personal growth. I encourage you to explore every corner of our campuses, extract every
ounce of knowledge, and embrace the full spectrum of experiences that DSEU has to
offer.
V I.B. 2023-24 | Doctoral Programs (Ver 1.0)
With great anticipation, I look forward to witnessing your journey unfold, and I hope that
you share my enthusiasm for an academic year brimming with novel experiences, endless
possibilities, and remarkable growth.
As we forge ahead, aiming to conquer the challenges and seize the opportunities that the
landscape of skill education presents, our commitment to fostering a resilient community
and empowering our students and faculty remains unswerving. We are steadfast in our
pursuit of investments that nurture passion, drive innovation, and solidify our University's
standing as a beacon of excellence.
With my utmost and heartfelt best wishes.
Dr. Ashok Kumar Nagawat

Vice-Chancellor
VI I.B. 2023-24 | Doctoral Programs (Ver 1.0)
About Delhi Skill and Entrepreneurship University
The Delhi Skill and Entrepreneurship University (DSEU) has been established through an
act of the Legislative Assembly of the National Capital Territory of Delhi, namely the
“Delhi Skill and Entrepreneurship University Act, 2019” (Delhi Act 04 of 2020) to provide
quality education in applied sciences and skill education. The University aims to equip
students with world-class skill education to enable access to aspirational jobs and
inculcate an entrepreneurial mindset and entrepreneurship. DSEU creates a win-win for
the youth and industry by filling the existing gaps in skill training.
Building on the education philosophy of thinkers, such as Mahatma Gandhi and Vinoba
Bhave, DSEU aims to integrate the use of the hand, head and heart for balanced living and
engagement in lifelong learning. The focus is on teaching both self-reliance for lifelong
independence and the wisdom toward nurturing and valuing interdependence.
The University wishes to change the existing paradigm of skilling, making skill acquisition
aspirational and providing opportunities to all for skilling, up-skilling, and reskilling.
Besides, DSEU will support and nurture entrepreneurs and provide quality mentorship to
steer the entrepreneurial journeys of those interested, by providing incubation and hand-
holding.
The University started with its inaugural Academic Year in 2021 and launched 15 Diploma
programs, 18 Undergraduate programs (11 Flagship programs, BCA and 6 B.Tech.
programs) and 2 Postgraduate programs across 13 campuses in Delhi. In the second
academic cycle (2022-23), admissions for 15 Full-time Diploma programs, 2 Part-time
Diploma programs, 15 UG programs, and 4 B.Tech. programs, 4 M.Tech. Programs, MCA
and 4 Ph. D programs were conducted. In the third academic year i.e., 2023, the
University is launching admission across 21 Campuses in Delhi in 17 Full-time Diploma
programs, 12 Lateral Entry to Diploma Programs, Advanced Diploma in Automotive
Mechatronics, 20 UG programs, 4 B.Tech. programs, 4 Lateral Entry to B. Tech programs, 4
M.Tech. programs, MCA, M.Sc. (Medical Laboratory Sciences), 4 Ph.D. and various other
Short Term Certificate programs.
The University’s focus is on offering programs in close collaboration with industry

partners, which gives our students an edge in a better understanding of the skills required
by the industry. Students undertake live projects, regularly interact with domain-specific
experts, and take up on-the-job training in organisations during their program work,
simultaneously integrating the theory learned in the classroom with actual work
experience. It is this model of “learning by doing” which becomes a win-win situation for
all stakeholders involved. Further, we have a dedicated team for External Relations and
Placements & Partnerships which have created a transparent and robust ecosystem
helping recruiters and students make informed decisions.
VII I.B. 2023-24 | Doctoral Programs (Ver 1.0)
Vision, Mission, and Key Principles
Vision
● To set the standards for skilling and entrepreneurship education.
● To lead the students at DSEU to experience personal transformation, who in turn
become agents of bringing changes in the community.
● To become a leading partner in the sustainable growth of the industry and the
country.
Mission
● To accord dignity to all skills by emphasizing its teaching and learning.
● To inculcate an entrepreneurial mindset for sustainable growth of the planet, the
country, the society, the industry and the individual.
● To work in partnership with the industry to nurture talent which is honed to be
ready-to-work on the day of graduation.
Key Principles
Delhi Skill and Entrepreneurship University has defined some key principles which are
embedded in all its programs to help in the holistic development of all students:
● Develop market-linked programs by customizing them to specific job roles.
● Multiple entry/exit options and offer integrated career pathways.
● Design inclusive programs.
● Ensure holistic development by deeply integrating employability/life skills in the
curriculum.
● Leverage technology.
● Equip students with an entrepreneurial mindset.
VIII I.B. 2023-24 | Doctoral Programs (Ver 1.0)
Outreach and Extension
DSEU has a dedicated Centre for External Relations and Partnerships (CERP), for
developing and facilitating effective long term mutually beneficial partnerships with
national/international organisations, academic bodies, experts and communities;
providing industry interface activities to students and conducting on-campus internship
and placement drives; planning and organising year-round pre-placement support in
terms of personality development and grooming through one-on- one counselling,
workshops on resume building and mock interviews etc.; Providing internship and
apprenticeship to every student and connecting alumni and industry professionals with
the university at large.
Relevant industry partners like Infosys, ISS, Metropolis, HDFC, James Douglas, Hafele
India, Oneline Wellness, Enrich, UNICEF (Yuwaah), FinCart, CodeChef, GTT, SIDBI,
BlueStar, and many other companies have collaborated with DSEU to customise each of
our programs and devoted their time to the Curriculum Advisory Groups (CAG), ensuring
that all of our students have an experience that is both practical and applicable to the
workplace. State-of-the-art laboratories and equipment are also being made available by
several of our partners.
SSCs like Retailers Association's Skill Council of India Telecom Sector Skill Council,
Logistics Skill Council, and Electronics Sector Skill Council of India (ESSCI), are strategic
partners of DSEU. These SSCs not only assist in identifying in-demand courses but also
support with curriculum designing, engaging relevant employers, and assisting with
internships, mentorship, and student placement.
DSEU work closely with local communities like MasterG & Daughters, iDreamCareer,
Global Alliance for Mass Entrepreneurship (G.A.M.E), Space 2 Grow, Women & Child
Development, GNCT, Sun Foundation, Mahindra Classrooms, Naandi Foundation, Toilet
Board Coalition, Buddy4Study, NavGurukul and Lighthouse Communities Foundation to
involve them in practical projects for students, take collective decisions, and empower
communities through skill development. DSEU partners with professionals as well as civil
society organisations to effectively engage as well as help build stronger and more
resilient local communities.
IX I.B. 2023-24 | Doctoral Programs (Ver 1.0)
Placements
DSEU campuses have organised more than 100 campus placement drives where
companies like Maruti, Bajaj Motors, LG, Sony, Infosys, Wipro, Deloitte and many others
have participated, and more than 2500 offers were made for placement. DSEU also
organised Job Utsav where more than 26 companies, 1600 students participated and 1490
offers were rolled, below mentioned are a few highlights of the placements.
● 2553 offers rolled through different placement activities.

● 1063 students have got placement through various campus drives.
● 1490 offers were rolled out in the 3-day Job Utsav
● Companies like Maruti, New Allenberry and Bajaj has taken more than 200
students from different campuses.
● 94% interested students from B. Tech program got campus placements.
● Placement for all the interested student is the ultimate objective of the
university.
Today to name a few, we have a strong alumni network in organisations like Oracle-USA,
Accenture, Nike-USA, Maruti, Amazon, SAP, Cognizant, Samsung, Infosys, TCS, Capgemini,
HCL, Nokia, Airtel, Trident, IBM, Hitachi, Yamaha, ISRO, Indiamart, Godrej, HSBC, Wipro,
NTT Data Services, Knorr Bremse, Reliance, NTT Data Services, Defence Services, Research
Organizations, etc. The highest package offered is to the tune of INR 25 LPA.
X I.B. 2023-24 | Doctoral Programs (Ver 1.0)
Innovation and Incubation
DSEU equips students with world-class skill education to enable access to aspirational jobs
and inculcate an entrepreneurial mindset. DSEU aims to create a win-win for the youth
and the industry by filling the existing gaps in skill training and support the
entrepreneurial aspirations of its students and other external budding entrepreneurs.
DSEU has set up an incubator, DSEU Innovation and Incubation Centre for
Entrepreneurship (DIICE), to provide a platform for encouraging and supporting the
entrepreneurial endeavours, DIICE has been set up as a Section 8 Company with its own
independent Board of Directors.
The objective of the incubator to be a catalyst in shaping the entrepreneurial ecosystem

through niche and tailored incubation programs offered not only at the grass root level
but also to innovative start-ups across industries. The enterprises nurtured will aim to
generate value for their various stakeholders and society by being scalable, sustainable,
and socially responsible. The incubator intends to support start-ups set up by any
entrepreneur anywhere, including those set up by DSEU students, alumni and faculty.
Many DSEU programs (e.g., Interior design, Fashion design, Aesthetics & Beauty) are
designed to promote freelancing/creation of traditional businesses, as evidenced by a rich
pool of alumni entrepreneurs. In addition, DSEU offers various Diploma and Degree
programs across various engineering streams where one would see the emergence of
typical product/process innovation startups.
DIICE will be helping start-ups in all phases of growth - Pre-incubation, Incubation,

Acceleration and Post-incubation. In addition, DIICE will be offering services such as
access to technical experts, training, legal guidance, business connects, co-working spaces
and investment support. The following programs are offered by DIICE:
● Business Launchpad Program - for incubating the ventures set up by the students,
alumni, faculty, and staff of DSEU.
● Growth & Innovation Program – oriented towards supporting the entrepreneurial
aspirations of external entrepreneurs with innovative ideas.
● Business Blasters Program - for supporting a Delhi govt program – the ‘Business
Blasters’, whereby top 100-150 teams of grade XI & XII student entrepreneurs will
be incubated.
● Women Entrepreneurship Program – for fostering & supporting the
entrepreneurial aspirations of women through the Anganwadi Hub Centres (AHCs)
as part of the Department of Women & Child Development’s ‘Saheli Samanvay
Kendra (SSK)’ scheme (‘Samriddhi’).
XI I.B. 2023-24 | Doctoral Programs (Ver 1.0)
Our Partners
Industry Partners
And many more...

Sector Skill Councils
And many more...

Community Development
And many more...

Knowledge Partners
And many more...

To know more about our partners, refer to our website www.dseu.ac.in
1 I.B. 2023-24 | Doctoral Programs (Ver 1.0)
Contents
Message from the Vice-Chancellor ............................................................................... IV

About Delhi Skill and Entrepreneurship University ..................................................... VI
Vision, Mission, and Key Principles ............................................................................. VII
Outreach and Extension............................................................................................... VIII
Placements ..................................................................................................................... IX
Innovation and Incubation .............................................................................................. X
Our Partners.................................................................................................................... XI
1. DSEU Campuses ...................................................................................................... 3
2. Schools Offering Ph.D. Program
2.1. School of Engineering Sciences & Technology.................................................... 6
2.2. School of IT & ITeS ............................................................................................. 6
3. About the Ph.D. Program
3.1. Computer Science & Engineering ........................................................................ 7
3.2. Mechanical Engineering ...................................................................................... 7
3.3. Electronics & Communication Engineering .......................................................... 8
3.4. Computer Applications......................................................................................... 8
4. Classification of Applicant ....................................................................................... 9
5. Eligibility for Part Time (Sponsored) /Full Time (Sponsored) Research Scholars .
................................................................................................................................. 10
6. Minimum Qualification Criteria for Admission ..................................................... 11
7. Selection Process ................................................................................................... 12
8. Result Declaration .................................................................................................. 13
9. Reservation/Relaxations ........................................................................................ 14
10. Seat Matrix .............................................................................................................. 15
11. Fee Details
11.1. Program Fee .................................................................................................. 16
11.2. Refund of Fee ................................................................................................ 16
12. Course Work ........................................................................................................... 17
13. Teaching cum Research Fellowship ..................................................................... 18
14. Syllabus for Entrance Test DPRAT ....................................................................... 19
15. Procedure for Online Registration ........................................................................ 24
16. Important points for Candidate seeking reservation ........................................... 26
17. Seat Conversion Rules........................................................................................... 27
ANNEXURE - I
Income & Asset Certificate - Economically Weaker Sections ...................................... 28
ANNEXURE - II
Certificate For Defence Quota ..................................................................................... 29
ANNEXURE – III
Certificate for Person with Benchmark Disability (PwBD) ............................................ 30
Form-I
Disability Certificate..................................................................................................... 31
Form-II
Disability Certificate..................................................................................................... 32
ANNEXURE - IV
Form of Medical Certificate ......................................................................................... 34
ANNEXURE - VII
Check-List ..................................................................................................................... 35
ANNEXURE - VIII
TENTATIVE SCHEDULE FOR ONLINE WEB-BASED APPLICATION FOR Ph.D.
ADMISSION – 2023 .................................................................................................... 36
ANNEXURE - IX
No Objection Certificate .............................................................................................. 37
ANNEXURE- XI
DELHI SC LIST ............................................................................................................ 38
ANNEXURE- XII
DELHI OBC LIST ......................................................................................................... 39
1. DSEU Campuses
Director/ Campus
S. No Campus
Incharge
Ambedkar DSEU Shakarpur Campus- I
Formerly known as Ambedkar Institute of Technology
Dr. Sampurnananda
1
Shakarpur (Opp. Madhuban), Delhi - 110092 Mishra
Email ID: [email protected]
Aryabhatt DSEU Ashok Vihar Campus

Formerly known as Aryabhatt Institute of Technology
2 Telephone Exchange, G.T. Karnal Road, Near Shakti Nagar, Dr. S.V. Vageesha
Ashok Vihar, Delhi - 110033
Bhai Parmanand DSEU Shakarpur Campus- II
Formerly known as Bhai Parmanand Institute of Business
Studies
3 Dr. Girish Sharma
Shakarpur (Opp. Madhuban), Delhi - 110092
Centre for Healthcare, Allied Medical and Paramedical
Sciences DSEU Okhla-II Campus
Formerly known as Delhi Institute of Tool Engineering
4 Prof. Dipali Bansal
Maa Anandmayi Marg (Near DJB Water Tank),
Okhla Industrial Area Phase-II, New Delhi - 110020
Dr. H.J. Bhabha DSEU Mayur Vihar Campus
5 Sanjay Lake View Apartments, Pocket 5, Mayur Vihar, New Dr. Ghansyam
Delhi, Delhi 110091
DSEU Dwarka Campus
Formerly known as Integrated Institute of Technology
Dr. Kavita Khanna
6
Sector-9, Dwarka, New Delhi - 110077
DSEU Jaffarpur Campus
7 Behind Rao Tula Ram Memorial, Rawta Moor, Dr. Pankaj Lathar
Jaffarpur Kalan, New Delhi- 110073
DSEU Okhla-II Campus

Prof. (Dr.) Mumtaz
8 Maa Anandmayi Marg (Near DJB Water Tank),
Ahmad Khan
Okhla Industrial Area Phase-II, New Delhi - 110020
DSEU Pusa Campus- I

Formerly known as Pusa Institute of Technology
9 Dr. Om Prakash Singh
Pusa, New Delhi - 110012
DSEU Pusa Campus- II
Formerly known as WCSC Pusa
10 Prof. N. Jena
Pusa, New Delhi - 110012
DSEU Rajokri Campus

Formerly known as Rajokri Institute of Technology
11 Sh. P. Ramanaiah
Golden Gate, Rajokri, New Delhi - 110038
DSEU Ranhola Campus
12 Near Laxmi Park, Kamruddin Nagar, New Delhi - 110041 Dr. Pramod K. Goyal
DSEU Siri Fort Campus

Formerly known as World Class Skill Centre
Prof. (Dr.) Sangita
13
August Kranti Marg, Sirifort, New Delhi -110049 Passey
DSEU Vivek Vihar Campus

Formerly known as World Class Skill Centre
14 Dr. Punita Duhan
Vivek Vihar, Delhi-110095
DSEU Wazirpur Campus
15 Dr. Pankaj Singh
Wazirpur Industrial Area, Delhi - 110052
G. B. Pant DSEU Okhla-I Campus

Formerly known as GB Pant Engineering College
Okhla Phase III, Okhla Industrial Area, New Delhi, Dr. Dipali Bansal
16
Delhi - 110020
G. B. Pant DSEU Okhla-III Campus

Formerly known as GB Pant Institute of Technology
17 Okhla Phase III, Okhla Industrial Area, New Delhi - 110020 Prof. Vibhakar Shrimali
Guru Nanak Dev DSEU Rohini Campus

Formerly known as Guru Nanak Dev Institute of Technology
18 Sh. Ravinder Singh
Sector – 15, Rohini, Delhi - 110089
Kasturba DSEU Pitampura Campus** (for Women only)

Formerly known as Kasturba Institute of Technology
19 Prof. Shruti Tripathi
Muni Maya Ram Marg, Pitampura Delhi - 110088
Meerabai DSEU Maharani Bagh Campus** (for Women
only)
Formerly known as Meerabai Institute of Technology
20 Ms. Manju Jain
Eastern Avenue Road, Maharani Bagh, New Delhi 110065
Sir C.V. Raman DSEU Dheerpur Campus
21 Nearby Burari Crossing, on Outer Ring Rd, Dr. Monica Chopra

Dheerpur, Nirankari Park, Gopalpur Village, Delhi, 110009
** - DSEU Maharani Bagh Campus and Kasturba DSEU Pitampura Campus offer programs to
only women. They are women-only campuses.
2. Schools Offering Ph.D. Program
2.1. School of Engineering Sciences & Technology
a. Computer Science & Engineering
Programs
b. Mechanical Engineering
Offered
c. Electronics & Communication Engineering
2.2. School of IT & ITeS
Program
a. Computer Applications
Offered
3. About the Ph.D. Program
3.1. Computer Science & Engineering

The department prepares and equips students with the most relevant, industry aligned
skills to design, manage, develop, implement, and support computer-based information
systems. The department has highly qualified faculty members from top institutions,
working together to touch new heights in the research domain. These collective efforts
have kept the department on a growth path. An updated curriculum and alignment with
the need for innovation, has also resulted in the department alumni holding important
positions in industry in India and abroad. The department is currently offering the following
courses – B. Tech in Computer Science and Engineering, M.Tech. in Computer Science and
Engineering with specialization in Artificial Intelligence & Machine Learning.
The department currently offers a wide array of latest research opportunities in Machine
Learning, Deep Learning, Ad hoc Networks, Recommender Systems, Algorithms, Big Data,
Network Security, Internet of Things etc.
3.2. Mechanical Engineering

The presence of experienced and highly talented faculty has helped to establish a high
reputation for the department of Mechanical Engineering in academia and industry. The
department is equipped with state of art Computer Integrated Manufacturing Lab, Robotics
Lab, Advance Manufacturing Methods Lab, Mechanical Workshop, Mechatronics Lab,
Internal Combustion Engine Lab, Refrigeration and Air Conditioning Lab, Metrology, and
other related labs as well. With a wide range of hi-tech machines, tools and equipment’s,
the department enhances the practical knowledge of students enabling them to handle the
ever-challenging needs of technical excellence in all areas of Mechanical Engineering.
The department of Mechanical Engineering offers B.Tech. programs in Mechanical
Engineering, Mechatronics Engineering, Tool Engineering and M. Tech Programme in Tool
Engineering at DSEU Okhla II Campus. In addition, G. B Pant DSEU Okhla I Campus offers B.
Tech & M. Tech in Mechanical Engineering.
The students and the faculty of the department also interact regularly with the industry
through internships, projects and research associations and hence are updated with the
latest trends in the industry. The students at other reputed universities also utilize the labs
of the department for their training and research work.
3.3. Electronics & Communication Engineering

Since the inception of the Electronics & Communication Engineering (ECE) department, the
primary objective has been to become the front-runner in its core area of specialization.
The ECE department has made the students grow professionally by acquiring the
specialization in electronics, basic sciences and professional skills through meticulous
learning and practical engineering concepts. The B. Tech and M. Tech programs in ECE are
offered at G B Pant DSEU Okhla I Campus. The Department of ECE, G B Pant DSEU Okhla I
(formerly G. B. Pant Govt Engineering College) was established in the year 2007. With a
vision to excel in Education and Research, the department has taken the lead to establish
various state-of-the-art, comprehensive, and well-equipped laboratories. The department is
well-known in the North India Region for its ultra-modern research facilities especially in
regard to the testing and measurement of antennas and other RF and microwave devices in
Anechoic Chamber located in Advanced Microwave Lab.
The dynamic and vibrant faculty of the department have been participating in the various
research activities and faculty development programs at regular intervals to equip
themselves with the technologies. Further the students of the department are trained in
the practical realm according to the current industry standards to increase the rate of
employment in this sector.
Department offers research opportunities in Digital Image Processing, Digital Signal
Processing, Advanced Communication Engineering, Machine Learning, Deep Learning and
ANN, RF, Antenna & Microwave, Optimization, Wireless and Optical Communication, IoT.
3.4. Computer Applications

The department of Computer Applications prepares and equips the students with the most
relevant, industry aligned skills to design, manage, develop, implement, and support
computer-based information systems. The curriculum has been designed to cater to the
ever changing needs and demands of the IT industry. The focus is to keep abreast with the
latest developments, continuously enhance skill sets and empower students to make
significant contributions in the IT Sector at all levels. The department is currently offering
the following courses – B.Sc. in Data Analytics, Bachelors in Computer Applications (B.C.A.)
and Masters in Computer Applications (M.C.A.).
The department has highly qualified faculty from the top institutions, working together to
touch the new heights in teaching and research domain in computer applications.
Department offers a wide array of latest research opportunities in Programming, Database
and Networking and Software Engineering, Software Testing, Distributed DBMS, Digital
Electronics, and Microprocessor, Cloud Computing, Network Security, Internet of Things
etc. With continuous efforts and adjusting to the need of innovation, the department has
produced quality professionals holding important positions in the I.T. industry in India and
abroad.
4. Classification of Applicant
The applicant seeking admission to the Ph.D. programme shall be classified under any one
of the following categories:
a. Full Time Research Scholar

A person registered for the Ph.D. Degree devoting Full-Time for completing the
degree requirements, with financial assistance from the university or any other
sources including sponsored research projects or various fellowship schemes and
satisfying the minimum qualification criteria.
b. Part Time Research Scholar

A person who is registered for the Ph.D. degree and will devote part of her/his
time towards their pursuit and devote part of her/his time towards the discharge
of her/his official obligations & satisfying the minimum qualification criteria.
5. Eligibility for Part Time (Sponsored) /Full Time

(Sponsored) Research Scholars
An applicant is eligible for Part Time (Sponsored) /Full Time (Sponsored) research
scholars, provided she/he fulfils the following conditions:
5.1. The applicant possesses the minimum qualification criteria.

5.2. The applicant is presently employed under the following categories:
a. Applicants working in organizations which have MOU with DSEU.
b. Applicants working on Full-Time basis (regular/adhoc/contract) in a National
Level R&D Lab/ a reputed organization/ recognised educational institution/
university/ PSU/ Corporate/ Industry registered under Company’s Act
organization.
c. Applicants working in projects (JRF/SRF/Project Assistant/Research Assistant
etc.) in National-Level R&D Institutions.
d. The Applicant possesses at least two years of relevant work experience in the
above categories, as at 5.2 b. However, for 5.2 c work experience is not
mandatory.
e. The applicant gets a NOC from employer, at the time of provisional
registration.
6. Minimum Qualification Criteria for Admission
S. No. School Minimum Eligibility
a. An applicant with M.E./M.Tech Degree or

equivalent from a recognized University/ Institution
in the relevant discipline with minimum of 60%
marks in aggregate or its equivalent CGPA in the
School of point scale wherever grading system is followed.
Engineering
1. b. An applicant not satisfying the criteria mentioned
Sciences &
above (a) of minimum eligibility, seeking admission
Technology
after a 4-year/8-semester B.Tech./ B.E. degree
programme should have a minimum of 75% marks
in aggregate or its equivalent grade on a point scale
wherever the grading system is followed.
a. An applicant with MCA/MSc degree in relevant

discipline from a recognized University/ Institution
with minimum of 60% marks in aggregate or its
equivalent CGPA in the point scale.
School of IT & b. An applicant not satisfying the criteria mentioned

2. above (a) of minimum eligibility, seeking admission
ITeS
after a 4-year/8-semester bachelor’s degree
programme in the relevant discipline should have a
minimum of 75% marks in aggregate or its
equivalent grade on a point scale wherever the
grading system is followed.
Note: In all the programs mentioned above equivalent qualification from a foreign
educational institution accredited by an assessment and accreditation agency
which is approved, recognized, or authorized by an authority, established, or
incorporated under a law in its home country or any other statutory authority in
that country to assess, accredit or assure quality and standards of the educational
institution shall be considered.
7. Selection Process
a. The applicants shall be admitted based on an entrance test followed by an

Interview. Applicant can appear for DSEU Doctoral Program Research Aptitude
Test (DPRAT) or CUET (Ph.D.) conducted by NTA.
b. The applicants who have secured minimum qualifying marks of 50% in DPRAT shall
be considered for the interview.
c. Applicants Exempted from DPRAT
i. Regular faculty members of DSEU or faculty on deemed deputation of DSEU
and applicants who have qualified UGC/CSIR-NET/JRF examination or valid
GATE score (with qualifying marks) in the relevant area of research shall be
exempted from taking the entrance test.
ii. Foreign students who apply through Ministry of Human Resource
Development or foreign students under a Cultural Exchange Scholarship
Programme of Government of India shall be exempted from taking the
entrance test.
d. The preference will be given to the exempted applicants & DPRAT scores for
preparing the list of eligible applicants for the interview. If seats remain vacant
after the selection process (DPRAT & interview), then CUET scores will be
considered for interview. Industry candidates are encouraged to apply.
e. A relaxation of 5% of marks (from 50% to 45%) shall be allowed for the candidates
belonging to SC/ST/OBC (non-creamy layer)/EWS/PwBD/Defence Personal (DP) in
the entrance examination conducted by the University.
f. The DPRAT shall consist of 50% questions on Research Aptitude/Methodology,
which may include quantitative methods, experimental techniques etc., and 50%
subject-specific questions.
g. The weightage for the entrance test will be 70% and 30% for the interview/viva-
voce.
h. Every candidate needs to submit a brief about her/his research area/interest and
is required to give a presentation on the same before the interview committee.
i. List of candidates qualified for the interview, schedule and venue of the interview
will be notified on the Website.
8. Result Declaration
Result will be declared on the University Website www.dseu.ac.in. No separate intimation

will be sent to the candidates regarding declaration of results and commencement of
interview/ admission.
9. Reservation/Relaxations
a. In all the Ph.D. programs of the University, reservation of seats for applicants in all
the categories, including SC/ST/OBC (non-creamy layer)/Person with Benchmark
Disability (PwBD), Economically Weaker Section (EWS)/ Defence Personal (DP) will be
applicable as per the policies of Govt. of National Capital Territory of Delhi.
b. SC/ST/OBC (non-creamy layer)/EWS/PwBD/DP applicants will be given 5% marks
relaxation in the minimum qualification criteria as per DSEU Ph.D. Regulations.
c. Provided further that, if in spite of the above relaxation, the seats remain unfilled,
they shall be filled by the applicants from the unreserved category.
10. Seat Matrix
S. No Department Seats SC ST OBC EWS GEN
1. Computer Science & Engineering 8 1 1 2 1 3
Electronics & Communication

2. 18 3 1 5 2 7
Engineering
3. Mechanical Engineering 20 3 2 5 2 8
4. Computer Application 6 1 0 2 1 2
Note: No of seats are tentative and seat allotment may vary depending upon the desired
research area of the applicant and availability of vacancy with the supervisor.
11. Fee Details
11.1. Program Fee#
Program fee for Program fee for

DSEU Faculty other Applicants
Tuition Fee INR 3,500 INR 6,000
Student welfare INR 2,000 INR 2,000
Facilities & Service

INR 1,000 INR 1,000
Charges
Examination Fee INR 1,000 INR 1,000
Total Annual fees INR 7,500 INR 10,000
In addition to above fee structure, the following fee are also

required to be paid at the time of admission:
Alumni Fee (One time) - INR 3,000
Caution Money (One

- INR 2,000
time; Refundable)
# (This fee structure is subject to the approval of University’s Board of Management)
11.2. Refund of Fee

The amount of program fee/other charges deposited by the student may not be refunded if
the candidate does not join the programme or leave the University and intimate the same
after the last date of fee submission. Fee refund shall be done as per the University policy.
12. Course Work
a. Each research scholar shall be required to take course work as per DSEU Ph.D.
Regulations.
b. The credits requirement for the Ph.D. course work shall be:
i. A minimum of 12 credits for scholars with an acquired master’s degree in
relevant discipline.
ii. A minimum of 24 credits for scholars with an entry after a 4-year bachelor’s
degree.
iii. A candidate seeking admission to computer applications program with
MCA/MSc in the relevant discipline will have to undergo a course work of
minimum 18 credits.
c. Refer to DSEU Ph.D. regulations for detailed course work guidelines.
13. Teaching cum Research Fellowship
a. The number & amount of Teaching-cum-Research Fellowships instituted by the

University for the full time research scholars shall be 13 (Thirteen) & INR 31000/-
(Thirty one thousand) per month respectively.
b. The full-time research scholars may avail JRF/SRF/GATE fellowship, as per UGC/
AICTE guidelines.
c. A candidate can avail only one fellowship/ financial assistance at a given point of
time. The fellowship is provided only in case candidate is not receiving any
financial assistance from any other sources.
d. The award of fellowship shall be reviewed every semester. Continuation of the
fellowship is subject to satisfactory research performance and satisfactory
academic performance in the discharge of responsibilities assigned to the
research scholar.
e. The duration of the fellowship is three years and shall be extended for a
maximum period of one year by the Vice Chancellor.
f. The admission to the program and award of fellowship are not linked. Admission
to any program does not guarantee the award of the fellowship.
g. The fellowship shall be paid on a monthly basis. The research scholar with
fellowship would be expected to contribute 8 hours per week to the university
through designated teaching assistance, laboratory, assignments, and other work
of academic nature and requirement.
14. Syllabus for Entrance Test DPRAT
a. The DSEU DPRAT will contain two parts. Part A will be common for all the programs
and Part B will be discipline specific.
b. Part A (Common for all the programs)

Types of data, description of data, frequency distributions, bar, pie charts, graphs,
mean, median, mode, standard deviation, error bars, dependent and independent
variables, discrete and continuous random variables, probability, outliers, statistical
inference, standard normal distribution, statistical significance, chi square test,
comparing data, correlations, & curve fitting. This part shall contain questions-
pertaining to General Aptitude with emphasis on logical reasoning, graphical
analysis, analytical and numerical ability.
c. Part B (Discipline Specific)

▪ Computer Science & Engineering
Digital Logic: Boolean algebra. Combinational and sequential circuits.
Minimization. Number representations and computer arithmetic (fixed and
floating point).
Computer Organization and Architecture: Machine instructions and addressing
modes. ALU, data-path and control unit. Instruction pipelining, pipeline hazards.
Memory hierarchy: cache, main memory, and secondary storage.
Programming and Data Structures: Programming in C. Recursion. Arrays, stacks,
queues, linked lists, trees, binary search trees, binary heaps, graphs.
Algorithms: Searching, sorting, hashing. Asymptotic worst-case time and space
complexity. Algorithm design techniques: greedy, dynamic programming and
divide-and-conquer. Graph traversals, minimum spanning trees, shortest paths.
Theory of Computation: Regular expressions and finite automata. Context-free
grammars and push-down automata. Regular and context-free languages.
Compiler Design: Lexical analysis, parsing, syntax-directed translation. Runtime
environments. Intermediate code generation. Local optimisation, common
subexpression elimination.
Operating System: System calls, processes, threads, inter-process
communication, concurrency, and synchronization. Deadlock. CPU and I/O
scheduling. Memory management and virtual memory.
Databases: ER-model, Relational model (Relational algebra, Tuple calculus),
Integrity constraints, Normal Forms- 1 NF, 2 NF, 3 NF and BCNF, Query languages
(SQL), Transactions and concurrency control.
Software Engineering: Software Process, Modeling Languages, Requirement and
feasibility analysis, Process Models, Planning and managing the project, Domain
specific modeling, Software architecture and design patterns, Software reliability

and testing techniques.
Computer Networks: Concept of layering. LAN technologies (Ethernet). Flow and
error control techniques, switching. IPv4/IPv6, routers, and routing algorithms
(distance vector, link state). TCP/UDP and sockets, congestion control.
Application layer protocols (DNS, SMTP, POP, FTP, HTTP). Basics of Wi-Fi.
Network security: authentication, basics of public key and private key
cryptography, digital signatures and certificates, firewalls.
▪ Electronics & Communication Engineering

Network Theory: Node Analysis, Mesh Analysis, Superposition Theorem,
Thevenin’s Theorem, Norton’s Theorem, Maximum Power Transfer Theorem,
Reciprocity Theorem, Wye-Delta Transformation, Two Port Network Parameters,
Steady State Analysis of R,L,C, Circuits.
Analog Electronics: Intrinsic and Extrinsic Semiconductors, Energy bands,
Diffusion and Drift Currents, Mobility, Equation of Continuity, P-N Junction diode,
Zener Diode, Light Emitting Diode (LED), Photodiode, Clipping and Clamping
Circuits, Rectifiers, Filters, BJTs & MOSFETs with their Biasing and Small Signal
Analysis, Op-amp Circuits and their Applications like Adder, Integrator,
Differentiator and Differential Amplifier.
Digital Circuits: Number System, Boolean Algebra, Logic Gates, K-Map,
Multiplexers, Demultiplexers, Encoders, Decoders, Code Converters, Flip-Flops,
Counters, Registers, ADCs and DACs, Computer Organization: Addressing Modes,
Internal Architecture of 8085 Microprocessor, Pipelining, Virtual Memory, Cache
Memory, and Mappings.
Signals and Systems: Classification of Signals, Classification of various Systems, LTI
Systems, Impulse Response, Poles and Zeros, Convolution and Correlation,
Fourier Series, Fourier Transform, DTFT, DFT, Z-Transform, Laplace Transform,
Sampling Theorem, FIR and IIR Filters, Multi-rate Digital Signal Processing.
Communication Systems: Amplitude Modulation and Demodulation, Angle
Modulation and Demodulation 1, Noise, Noise Figure, White Noise, Random
Variables and Processes, Power Spectral Density, Entropy, Channel Capacity,
Error Detection and Correcting Codes, Cyclic Codes, Multiple Access Techniques,
PCM, DPCM, Line Coders, DM, ADM, ASK, FSK, PSK, QAM, Intersymbol
Interference, Matched Filter, Gram Schmitt Orthogonality.
Electromagnetic Theory: Gauss’s Law in Electrostatics and Magnetostatics,
Boundary Conditions for Dielectrics, Faraday’s Law of EM Induction, Ampere’s
Law, Maxwell’s Equations and their Differential & Integral Forms, Wave
Equations, Poynting Theorem.
Uniform Plane Waves, Reflection and Refraction, Phase Velocity, Group Velocity,
Wave Propagation in Conductors and Dielectrics, Depth of Penetration,
Transmission Line Equations, Impedance Matching, Smith Chart.
Control Systems: Open Loop and Closed Loop Systems, Transfer Function, Block
Diagram Reduction and Signal Flow Graphs, Routh-Hurwitz Criterion, Bode Plot,
Root Locus Plot, Polar Plot, Nyquist Stability Criterion, Lag, Lead and Lag-Lead
Compensators, State variables, State Equations, and their Solutions.
Power Systems: Power Generation concepts, AC and DC Transmissions systems,
Model and performance of Transmission lines and cables, Electrical distributions
systems, Insulators, Per unit system, Bus Admittance matrix, Load flow studies,
Voltage and frequency control, Symmetrical & Unsymmetrical faults, Introduction
to switchgear & protection.
Electrical Machines: Single & Three phase Transformers, DC Machines, three
phase Induction Motor, Synchronous Machines, Special purpose Machines,
Analysis, and application od AC/DC machines, Renewable Energy, and their
concepts.
▪ Mechanical Engineering
Production Engineering: Metal Cutting, Metal Forming, Welding, Metal Casting,
Material Characterization, Non-traditional Manufacturing Processes,
Measurements & Metrology, Grinding of Ceramics and Metal Matrix
Composites, Powder Metallurgy, Microcellular Injection Moulding, Finite
Element Applications in Manufacturing, CAD/CAM, Rapid Prototyping,
Manufacturing Automation, Additive manufacturing, Laser material processing.
Fluid Mechanics and Thermal Sciences Fluid Mechanics: Fluid properties; fluid
statics, manometry, buoyancy, forces on submerged bodies, stability of floating
bodies; control-volume analysis of mass, momentum, and energy; fluid
acceleration; differential equations of continuity and momentum; Bernoulli’s
equation; dimensional analysis; viscous flow of incompressible fluids, boundary
layer, elementary turbulent flow, flow through pipes, head losses in pipes, bends,
and fittings.
Heat-Transfer: Modes of heat transfer; one dimensional heat conduction,
resistance concept and electrical analogy, heat transfer through fins; unsteady
heat conduction, lumped parameter system, Heisler's charts; thermal boundary
layer, dimensionless parameters in free and forced convective heat transfer, heat
transfer correlations for flow over flat plates and through pipes, effect of
turbulence; heat exchanger performance, LMTD and NTU methods; radiative
heat transfer, Stefan- Boltzmann law, Wien's displacement law, black and grey
surfaces, view factors, radiation network analysis.
Thermodynamics: Thermodynamic systems and processes; properties of pure
substances, behaviour of ideal and real gases; zeroth and first laws of
thermodynamics, calculation of work and heat in various processes; second law

of thermodynamics; thermodynamic property charts and tables, availability, and
irreversibility; thermodynamic relations.
Applied Thermal Engineering: Air and gas compressors; vapour and gas power
cycles, concepts of regeneration and reheat. I.C. Engines: Air-standard Otto,
Diesel, and dual cycles. Refrigeration and air-conditioning: Vapour and gas
refrigeration and heat pump cycles; properties of moist air, psychrometric chart,
basic psychrometric processes. Turbomachinery: Impulse and reaction principles,
velocity diagrams, Pelton-wheel, Francis and Kaplan turbines.
Engineering Materials: Structure and properties correlation; engineering
materials (metals, ceramics, polymers and composites) – properties and
applications; stress-strain behaviour of metals and alloys; iron-carbon phase
diagram, heat treatment of metals and alloys, its influence on mechanical
properties, stress-strain diagrams for engineering materials.
Mechanics of Materials: Stress and strain, elastic constants, Poisson's ratio;
failure theories; Mohr’s circle for plane stress and plane strain; thin cylinders;
shear force and bending moment diagrams; bending and shear stresses;
deflection of beams; torsion of circular shafts; Euler’s theory of columns; energy
methods; thermal stresses; strain gauges and rosettes; testing of materials with
universal testing machine; testing of hardness and impact strength.
Theory of Machines: Displacement, velocity and acceleration analysis of plane
mechanisms; dynamic analysis of linkages; cams; gears and gear trains; flywheels
and governors; balancing of reciprocating and rotating masses; gyroscope.
governors and fly wheels; design of bolted, riveted and welded joints;
interference/shrink fit joints; design of shafts, keys, spur gears, belt drives, brakes
and clutches; pressure vessels. Vibrations: Free and forced vibration of single
degree of freedom systems, effect of damping; vibration isolation; resonance;
critical speeds of shafts.
Machine Design: Design for static and dynamic loading; failure theories; fatigue
strength and the S-N diagram; principles of the design of machine elements-
bolted, riveted and welded joints; shafts, gears, rolling and sliding contact
bearings, brakes and clutches, springs.
Industrial Engineering: Quality, Reliability and Maintenance, Lean Manufacturing,
Time study, Motion study, Agile Manufacturing, Statistical quality control,
Operations Management, Project Management, Supply Chain Management,
Reverse Logistics, Inventory management.
Operations Research: Linear Optimization Models, Assignment and
Transportation Models, Queuing Theory, CPM/PERT.
▪ Computer Applications
Discrete Structures: Sets, functions, relations, counting; generating functions,
recurrence relations and their solutions; algorithmic complexity, growth of
functions and asymptotic notations.
Programming, Data Structures and Algorithms: Data types, control structures,
functions/modules, object-oriented programming concepts: sub-typing,
inheritance, classes and subclasses, etc. Basic data structures like stacks, linked
list, queues, trees, binary search tree,sorting, searching, order statistics, graph
algorithms, greedy algorithms and dynamic programming. NP-hard and NP-
complete problems.
Computer System Architecture: Boolean algebra and computer arithmetic,
flipflops, design of combinational and sequential circuits, instruction formats,
addressing modes.
Operating Systems: Processes and Threads. Process Synchronization, Concurrent
Processing, Mutual exclusion, Critical regions, Semaphores, Critical-Section
problem, Peterson’s Solution, Synchronization Hardware. CPU scheduling, I/O
scheduling, Resource scheduling. Memory allocation And Segmentation Virtual
memory, Deadlocks, Handling Deadlocks, Prevention, Avoidance, Detection and
Recovery.
Software Engineering: Software process models, requirement analysis, software
specification, software testing, software project management techniques, quality
assurance. Software reliability and testing techniques.
DBMS and File Structures: File organization techniques, database approach, data
models, DBMS architecture; data independence, E-R model, relational data
models, SQL, normalization, and functional dependencies. Transactions and
concurrency control.
Computer Networks: Overview of LAN, MAN and WAN, ISO-OSI and TCP/IP
models, basic concepts like transmission media, signal encoding, modulation
techniques, multiplexing, error detection and correction; Data link, MAC,
network, transport and application layer protocol features, Basic Cryptographic
Techniques.
15. Procedure for Online Registration
15.1. Login to register and apply

• All candidates interested in seeking admission in Ph.D. programs of Delhi
Skill & Entrepreneurship University (DSEU) are required to visit the
website www.dseu.ac.in, and fill an online registration form.
• While registering, the candidate has to provide the name, father’s name,
mother’s name, date of birth, mobile number and email-id. These details
cannot be changed after registration, so candidates need to be extra
cautious while registering.
15.2. Application Process
• The candidate will be required to authenticate himself/herself using the
credentials provided at the time of registration.
• While filing in the application form, the candidate is required to select
the program(s)/ stream(s) he/she is interested in seeking admission. A
candidate can apply in one or more Ph.D. programs. However, only one
application needs to be filled for all the programs applied for; however,
the fee needs to be paid for each department.
• Candidates are required to provide the following details while filling the
application form:
a. Personal Details
b. Types of Candidature:
i. Part Time
ii. Full Time
c. Candidates need to upload the documents in support of the
details filled in the registration/application form, as applicable:
i. Photo and Signature of Candidate (Upto 100 kb size max)
ii. Certificates and Marksheets of Class X & Qualifying Degree
iii. Valid GATE Score Card
iv. NET/JRF Certificate
v. Caste Certificate (SC/ST/OBC(NC) category)
vi. EWS Certificate as per Annexure I
vii. Defence category certificate as per Annexure II
viii. PwBD Certificate as per Annexure III
ix. Proof of DSEU Faculty/Staff
x. Work Experience Certificate*
xi. Letter of Sponsorship*
Note:
o All mentioned documents can be uploaded in JPG/JPEG/PDF format. The
maximum size of each document can be 5MB except the photo and
signature.
o * If a candidate is not able to submit the documents while filling the
application form then she/he may upload an undertaking pertaining to
the same, which then needs to be submitted at the time of interview.
• Once the application form is complete in all respects and all the required
documents have been uploaded, the candidate needs to confirm his/her
application form. The candidate will not be permitted to edit/change
details filled in the application form after the final submission.
• Once the application form is completed and confirmed by the candidate,
she/he will have to pay a non-refundable registration fee of Rs. 900/-
(plus bank charges as applicable) for application processing in each
department.
• If payment fails, the fee should be paid again for registration without
waiting for the refund. The candidate may inform DSEU Delhi by sending
an email to [email protected] providing the candidate’s
details (Applicant Name, Mobile Number, E-mail Id provided at the time
of registration, Date and Time of Transaction).
16. Important points for Candidate seeking reservation
a. It is the sole responsibility of the candidate to prove his/her eligibility for

claiming a reservation under any of the reserved categories. The candidates
under SC/ST/OBC/EWS categories and PwBD/DP subcategories will be
required to produce the certificate(s) of the respective reserved category/sub-
category issued by the competent authority at the time of Interview.
b. If the certificate for the reserved category candidate is not found to be in
order, no benefit of the reservation will be given.
c. Candidates belonging to OBC Category must upload the Latest Non-Creamy
Layer Certificate which should be valid as on 01-08-2023 issued from the
competent authority. In case the candidate has applied for the certificate and
only has details of application, but no caste certificate. Such Candidates will
strictly be considered as General Category Candidates.
d. If the OBC-NCL certificate is not valid as on 01-08-2023, then it should be
accompanied with valid family income certificate valid as on 01-08-2023
issued from the competent authority.
e. In case of EWS Candidates, Only FAMILY INCOME AND ASSET CERTIFICATE
which is valid as on 01-08-2023 will be considered.
f. All the candidates seeking admission under the Person with Benchmark
Disabilities (PwBD) quota are required to bring a certificate from Vocational
Rehabilitation Centre (VRC) for Handicapped, 9-11 Vikas Marg, Karkardooma,
Delhi-92, and for Dyslexia a certificate from Institute of Human Behavior and
Allied Sciences (IHBAS), Tahirpur Road, Dilshad Garden, Delhi-110095, only as
to whether he/she is fit for undergoing the program applied for. No other
certificate in this regard shall be entertained. Non-submission of certificate or
admission on the basis of the wrong choice filling other than as mentioned in
their PwBD certificate will lead to cancellation of admission”.
17. Seat Conversion Rules
17.1. Rule 1
After exhausting the complete list of registered candidates in PwBD and DP
subcategories, remaining vacant seats in these subcategories will be
transferred to respective main category (GEN/SC/ST/OBC/EWS).
17.2. Rule 2
The Vacant SC seats will be converted to ST category and vice-a-versa. After
exhausting the complete list of registered SC, ST, OBC and EWS candidates,
the vacant seats will be treated as unreserved.
ANNEXURE - I
Government of NCT of Delhi
(Name & Address of the authority issuing the certificate)
Income & Asset Certificate - Economically Weaker Sections
To Be Produced by Economically Weaker Sections
Certificate No. ________________ Date: __________
VALID FOR THE YEAR ____________
2. This is to certify that Shri/Smt./Kumari ___________ son/daughter/wife of

_____________ permanent resident of ___________________________, Village/Street
_____________ Post Office _______________________ District
_____________________________ in the State________________ Pin Code
_____________. Whose photograph is attested below belongs to Economically Weaker
Sections since the gross annual income* of his/her “family”** is below Rs. 8 lakhs
(Rupees Eight Lakh only) for the financial year _________. His/Her family does not own
or possess any of the following assets***:
I. 5 acres of agricultural land and above;
II. Residential flat of 1000 sq. ft. and above;
III. Residential plot of 100 sq. yards and above in notified municipalities;
IV. Residential plot of 200 sq. yards and above in areas other than the notified
municipalities.
3. Shri/Smt./Kumari ------------------------------------- belongs to the --------------------- caste
which is not recognized as a Scheduled Caste, Scheduled Tribe and Other Backward
Classes.
Signature with Seal of Office ______________

Name ________________________________
Designation ____________________________
* Income covered from all sources, i.e. salary, agriculture, business, profession, etc.
** The term “Family” for this purpose includes the person who seeks the benefit of
reservation, his/her parents and siblings below the age of 18 years as also his/her spouse
and children below the age of 18 years.
*** The property held by a “Family” in different locations or different places/cities have
been clubbed while applying the land or property holding test to determine EWS status.
ANNEXURE - II
Certificate For Defence Quota
For Availing Admission Against Defence Quota Issued By The Secretary

Kendriya Sainik Board, Delhi Or Secretary, Zila/Rajya Sainik Board Or Officer-In-
Charge, Record Office Of Concerned Service For Serving Personnel
This is to certify that Mister/Miss. ………………………………………
Son/Daughter of …………………………………………………………
resident of …………………………………………………… the above-named
officer / JCO / OR pertains to the category marked below:- (Select
one from below)
(a) Killed in Action on …………………………… during

……………………
(b) Disabled in Action on …………………… during ………………………..
(c)Died in peace time on ………………………………………………… with death attributable to
military service
(d) Disabled in peacetime with disability attributable to military service.
(e) Gallantry Award Winner (……………………………………………)
(f) Ex-Serviceman.
(g) Serving Soldier
(Category ________________above)
Mister/Miss. ………………………………………son/daughter of the above-named officer/ JOO/ OR
is eligible for Admission in ………………………………………………..program in ……………………………..
Board against the Defence quota under priority ………………………… . His/ Her Ex-Serviceman
Widow Identity Card No. is DLH-01………………….…/RSB
(Round stamp of Office)
SECRETARY
(Zila/Rajya Sainik Board)
ANNEXURE – III
Certificate for Person with Benchmark Disability (PwBD)

For Availing Admission against Person with Disabilities Quota
(To be issued by Medical Board from Government Hospital)
Name of the candidate: Mr./Ms.*_____________________

Father’s Name: ___________________________________
Permanent Address :_______________________________

________________________________________________
________________________________________________
Percentage loss of earning capacity (in words):_____________________________________

Whether the candidate is otherwise able to carry on the studies and perform the duties of
an engineer/architect satisfactorily: _____________________________________________
Name of the disease causing handicap: __________________________________________
Whether handicap is temporary or permanent: ____________________________________
Whether handicap is progressive or non-progressive: _______________________________
The candidate is FIT / UNFIT to pursue Diploma/ Undergraduate/Postgraduate/Ph.D.

(program name)_____________________________________________________________.
(*Strike out whichever is not applicable)
______________________ _______________________ _______________________
Doctor Doctor Chief Medical Officer

Date:
Seal of Office
NOTE:
The medical board must have three members.
1. Candidates having temporary or progressive handicap will not be considered against
these seats.
Form-I
Disability Certificate
(In cases of amputation or complete permanent paralysis of limbs and in cases of blindness)
(NAME AND ADDRESS OF THE MEDICAL AUTHORITY ISSUING THE CERTIFICATE)
Certificate No: Date:
This is to certify that I have carefully examined

Shri/Smt.___________________________ son/wife/daughter of
Shri/Smt._______________________________ Date of Birth
(DD/MM/YY)__________Age _____years, Male/Female _________
Registration No. ____________________________
Permanent resident of:
House No.-____________Ward/Village/ Street_______________
Post Office _____________________ District ___________________________________
State ____________________________________
Whose photograph is affixed above, and I am satisfied that:
1. He/ She is a case of:
a. Locomotor Disability
b. Blindness
(Please tick as applicable)
2. The diagnosis in his/her case is _________________________________________
3. He/She has______________% (in figure) ______________________________
percent (in words) permanent physical impairment/blindness in relation to
his/her ______________ (part of body) as per guidelines (to be specified).
4. The applicant has submitted the following document as proof of residence:-
Nature of Document Date of Issue Details of authority issuing certificate
(Signature and Seal of

Authorised Signatory of notified Medical Authority)
Form-II
Disability Certificate
(In cases of multiple disabilities)
(NAME AND ADDRESS OF THE MEDICAL AUTHORITY ISSUING THE CERTIFICATE)
Certificate No: Date:

This is to certify that I have carefully examined
Shri/Smt.___________________________ son/wife/daughter of
Shri/Smt._______________________________ Date of Birth
(DD/MM/YY)__________Age _____years, Male/Female _________
Registration No. ____________________________
Permanent resident of:
House No.-____________Ward/Village/ Street_______________
Post Office _____________________ District ___________________________________
State ____________________________________
whose photograph is affixed above, and are satisfied that:
1. He/She is a Case of Multiple Disability.His/Her extent of permanent physical

impairment/disability has been evaluated as per guidelines (to be specified) for
the disabilities ticked below, and shown against the relevant disability in the table
below:
S. No. Disability Affected Diagnosis Permanent physical
Part of Body impairment/ mental
disability (in %)
1 Locomotor disability @
2 Low vision #
3 Blindness Both Eyes
4 Hearing impairment £
5 Mental retardation X
6 Mental-illness X
@- e.g. Left/ Right/ Both arms/ legs

# - e.g. Single eye/ Both eyes
£ - e.g. Left/ Right/ Both eyes contd.
2. In the light of the above, his/her overall permanent physical impairment as per
guidelines (to be specified), is as follows:
a. In figures: _______________________ percent
b. In words: ________________________________________ percent
3. The above condition is progressive/non-progressive/likely to improve/not likely to
improve.
4. Reassessment of disability is:
a. Not necessary
b. Is recommended/after _________ years ________ months, and, therefore,
this certificate shall be valid till (DD/MM/YY) ___________________.
5. The applicant has submitted the following document as proof of residence:
Signature and seal of the Medical Authority:
____________________ _____________________ _______________________
Name and Seal of Member Name of Seal of Member Name and Seal of Chairperson
6. In words: ________________________________________ percent

7. The above condition is progressive/non-progressive/likely to improve/not likely to
improve.
8. Reassessment of disability is:
a. Not necessary
b. Is recommended/after _________ years ________ months, and, therefore,
this certificate shall be valid till (DD/MM/YY) ___________________.
9. The applicant has submitted the following document as proof of residence:
Signature and seal of the Medical Authority:
____________________ _____________________ _______________________
Name and Seal of Member Name of Seal of Member Name and Seal of Chairperson
ANNEXURE - IV
Form of Medical Certificate
(To be signed by a registered medical practitioner holding a Medical Degree)
(TO BE SUBMITTED AT THE TIME OF ADMISSION BY ALL CANDIDATES)
I certify that I have carefully examined Mr./Ms. _______________________ Son/Daughter

of Shri/Smt. ____________________________________ whose signature is given below.
Based on the examination, I certify that he/she is in good mental and physical health and is
free from any physical defects which may interfere with his/her studies including the active
outdoor duties required of a professional.
From the candidate records we know the candidate has undergone treatment/is
undergoing treatment for:
1. Name of ailment (s) (physical/mental) ________________________
2. Treatment _________________________(completed or continuing)

3. Treating Doctor _____________
In case of emergency or need, please get in touch with ______________________________

Marks of Identification ________________________________________________________
Signature of the Candidate ________________

Place:
Date:
*Please, note that this information will be kept confidential and will not in any-way be used
for making selection decisions
Name & signature of the Medical Officer with

seal and registration number
* Strike whichever is not applicable.
ANNEXURE - VII
Check-List
Documents Required at time of Interview for Ph.D. Programme 2022-2023
An application will be processed for admission only if the candidate is present personally
with all the mandatory original and one photocopy of each document listed below:
S.No. List of Documents Status (Yes/No/NA)

1 10th certificate and Marksheet
3 UG Certificate and Marksheet
4 PG Certificate and Marksheet, if applicable
5 Valid Gate Score Card, if applicable
6 NET/JRF Certificate, if applicable
7 Caste Certificate (SC/ST/OBC(NC) category), if
applicable
8 EWS Certificate, if applicable
9 Defence Personal Certificate, if applicable
10 Proof of DSEU Faculty/Staff, if applicable
11 NOC from Employer, if applicable
12 3 Latest Photographs
13 Medical fitness certificate
14 Research Proposal (in 1000 words)
15 Aadhar Card/PAN Card/Passport or any other ID
Proof issued by Govt of India
16 A set of self-attested copies of all the above
documents
( )
Signature of document verification officer
Please Note:
After verification of all the previous original marks cards and certificates, if they are found
to be in order, then the University may confirm your admission.
However, even after confirmation of the admission, if at a later date, any of the
documents submitted are found to be false, fake, fabricated or fudged, the University will
cancel the admission and forfeit the fee collected.
( )
Signature of Candidate
ANNEXURE - VIII
TENTATIVE SCHEDULE FOR ONLINE WEB-BASED APPLICATION FOR Ph.D.

ADMISSION – 2023
Tentative schedule for online web-based application for Ph.D. admission 2023-24 will be
announced on DSEU website.
The applicants are advised to check the website regularly for schedule and other updates.
ANNEXURE - IX
No Objection Certificate
For pursuing Ph.D. Program at Delhi Skill and Entrepreneurship University
(This should be typed on the letter head of the employee’s organization)
Name of the Candidate: ……………………………………
Address with Mobile No. and email ID: …………………………………………...……….……………

…………………………………………..……….…………………………………………………..……….…………….
…………………………………………..……….…………….
Department / Institution / Organisation where working (full address)

…………………………………………...……….……………………………………………………….……….……………
…………………………………………..……….………………………………………………………..……….……………
Post Held:
…………………………………………..……….………………………………………………………..……….……………
CERTIFICATE
Certified that ………………………………………………………………. is a regular employee since

…………………………? The department has NO Objection in her/his undergoing research
programme in the Delhi Skill and Entrepreneurship University, Delhi. In case of her/his
selection for the research programme she/ he would be granted leave to attend the
classes of course work of the PhD program.
Signature & Seal of the Head of the Organization/Institute
ANNEXURE- XI
DELHI SC LIST
ANNEXURE- XII
DELHI OBC LIST
List of OBC approved by SC/ST/OBC welfare department in Delhi
This Information Bulletin is only for information and guidance of candidates seeking
admission. The contents are likely to change without notice. This does not constitute to
be a legal document.
In case of any change in policy related to Admissions to Undergraduate Programmes –
2023, no separate communication will be made to the candidates and the same will be
notified on the admission related websites mentioned in the Information Bulletin.

DELHI SKILL AND ENTREPRENEURSHIP UNIVERSITY
(A State University Established under Govt. of NCT of Delhi Act 04 of 2020)
Examination, Admission and Training Cell
DSEU Shakarpur Campus II, Delhi
Website: https://dseu.ac.in

PH D - Brochure-1

Uploaded by

Copyright:

Available Formats

PH D - Brochure-1

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

PH D - Brochure-1

Uploaded by

Copyright:

Available Formats

I

II I.B. 2023-24 | Doctoral Programs (Ver 1.0)

FOR ADMISSION IN VARIOUS

दिल्ली कौशल एवं उद्यदिता दवश्वदवद्यालय

For any queries please mail: [email protected]

REGISTRATION FEE (Non-Refundable)

Message from the Vice-Chancellor

Congratulations and a warm, enthusiastic welcome to the dynamic community of Delhi

Here at DSEU, our unwavering commitment is to provide an exceptional, learner-centric

The meticulously designed curriculum across various academic programs at DSEU is

With my utmost and heartfelt best wishes.

Dr. Ashok Kumar Nagawat

About Delhi Skill and Entrepreneurship University

The University’s focus is on offering programs in close collaboration with industry

Vision, Mission, and Key Principles

Outreach and Extension

● 2553 offers rolled through different placement activities.

Innovation and Incubation

The objective of the incubator to be a catalyst in shaping the entrepreneurial ecosystem

DIICE will be helping start-ups in all phases of growth - Pre-incubation, Incubation,

And many more...

And many more...

And many more...

And many more...

Message from the Vice-Chancellor ............................................................................... IV

Aryabhatt DSEU Ashok Vihar Campus

DSEU Okhla-II Campus

DSEU Pusa Campus- I

DSEU Rajokri Campus

DSEU Ranhola Campus

DSEU Siri Fort Campus

DSEU Vivek Vihar Campus

G. B. Pant DSEU Okhla-I Campus

G. B. Pant DSEU Okhla-III Campus

Guru Nanak Dev DSEU Rohini Campus

Kasturba DSEU Pitampura Campus** (for Women only)

Sir C.V. Raman DSEU Dheerpur Campus

21 Nearby Burari Crossing, on Outer Ring Rd, Dr. Monica Chopra

2. Schools Offering Ph.D. Program

2.1. School of Engineering Sciences & Technology

a. Computer Science & Engineering

c. Electronics & Communication Engineering

2.2. School of IT & ITeS

3. About the Ph.D. Program

3.1. Computer Science & Engineering

3.2. Mechanical Engineering

3.3. Electronics & Communication Engineering

3.4. Computer Applications

a. Full Time Research Scholar

b. Part Time Research Scholar

5. Eligibility for Part Time (Sponsored) /Full Time

5.1. The applicant possesses the minimum qualification criteria.

6. Minimum Qualification Criteria for Admission

S. No. School Minimum Eligibility

a. An applicant with M.E./M.Tech Degree or

a. An applicant with MCA/MSc degree in relevant

School of IT & b. An applicant not satisfying the criteria mentioned

a. The applicants shall be admitted based on an entrance test followed by an

Result will be declared on the University Website www.dseu.ac.in. No separate intimation

__________ _ _____________

__________ _ _____________

__________ _ _____________