Scribd
Upload
56 views4 pages

EC 2113 Assignment1 232

The document contains an assignment for an Electrical Circuits course with 8 problems: 1) Calculating maximum power delivered and total energy for a circuit element given voltage and current over time. 2) Sketching a power vs. time plot and calculating energy delivered for a circuit element given voltage and current over time. 3) Finding voltage and power dissipated in resistors given current in one resistor. 4) Finding equivalent resistances for various circuits. 5) Finding node voltages and total power dissipated in a circuit. 6) Finding node voltages using node analysis and currents using mesh analysis with/without a current source. 7) Finding power dissipated in each resistor using mesh or node

Uploaded by

Zesrab Tanjeel Khan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
56 views4 pages

EC 2113 Assignment1 232

The document contains an assignment for an Electrical Circuits course with 8 problems: 1) Calculating maximum power delivered and total energy for a circuit element given voltage and current over time. 2) Sketching a power vs. time plot and calculating energy delivered for a circuit element given voltage and current over time. 3) Finding voltage and power dissipated in resistors given current in one resistor. 4) Finding equivalent resistances for various circuits. 5) Finding node voltages and total power dissipated in a circuit. 6) Finding node voltages using node analysis and currents using mesh analysis with/without a current source. 7) Finding power dissipated in each resistor using mesh or node

Uploaded by

Zesrab Tanjeel Khan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

UNITED INTERNATIONAL UNIVERSITY (UIU)

Dept. of Computer Science & Engineering


Course No: EEE 2113 Title: Electrical Circuits (Summer 2023)
Assignment - 1

Problems to solve:

1. The voltage and current at the terminals of a circuit element are zero for t < 0.
For t > 0 ,

a) At what instant of time is maximum power delivered to the element?


b) Find the maximum power in watts.
c) Find the total energy delivered to the element in millijoules. [20]
2. The voltage and current at the terminals of a circuit element are shown in Fig below.
[20]
a) Sketch the power versus time plot for 0 < t < 10 s.
b) Calculate the energy delivered to the circuit element at t = 1, 6, and 10 s.
3. The current in the 12 ohm resistor in the circuit in Fig. below is 1 A, as shown.
a) Find vg .
b) Find the power dissipated in the 20 ohm resistor.[10]

4. Find the equivalent resistance for each of the circuits in Fig. below. [10]

5. a) Find the node voltages V1, V2, and V3 in the circuit in Fig. below.
b) Find the total power dissipated in the circuit. [10]

6. a) Determine the node voltages in the circuit shown below using node analysis.
b) If 5mA current source is removed from the circuit, then determine the current
through the two 2k ohm resistors as well as the node voltages using mesh analysis
only. [10]

7. Determine the power dissipated in each resistor for the following circuit shown
below. Use mesh or node analysis. [10]
8. Use mesh analysis to find vab and io and in the circuit [10]

You might also like