Scribd
Upload
14 views

Finite Element Method

This document describes a composite wall made of three materials and asks to determine the temperature distribution. The wall has an inner surface temperature of 800°C and the outer surface experiences convection heat transfer at 20°C with a heat transfer coefficient of 25 W/m°C. The wall consists of three layers with different thermal conductivities.

Uploaded by

ravikaran tripathi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
14 views

Finite Element Method

This document describes a composite wall made of three materials and asks to determine the temperature distribution. The wall has an inner surface temperature of 800°C and the outer surface experiences convection heat transfer at 20°C with a heat transfer coefficient of 25 W/m°C. The wall consists of three layers with different thermal conductivities.

Uploaded by

ravikaran tripathi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

m

22MPD13

0.8 a. OR
A COmposite wall
consists of three materials shown in Fig Q8. L3 C03
Temperature is To = 20°C, The outer20
surface of the wall with Convection heat trans fer takes place on the
T =800°C and h inner
temperature distribution in the wall. =(25W/m°C. Determine ue

To = 20°C
Kj= 20 Wm°C
K, =30W/nC
KJ = 50W/m°C
h=25W/m °c
T= 800°C

0.3m

Fig Q8

Bp
Module -5 4
Q.9 a. Derive the equations of notion foI àspring mass system shown in Fig| 10 L2 CO4

Q9(a)
EP.

- EP
E -P. 3

EP

EP

16

Fig 09(a)

10 L2 CO4
metricsfor one-dimensional bar element.
Derive the element mass
b. |
OR
metrics for Lumped mass matrix. 10 L2 C04
mass
Q.10 a.
Derive the element
proceduree of Eigen values and Eigen vectors. 10 L2 C04
evolution
Briefly explainthe
b.
3 of3

You might also like