Thank you for purchasing a Kontakt Player Library from Best Service.
The following instructions are intended to help
you install and activate your library
DOWNLOAD AND EXTRACT
If you have purchased a box, this contains DVDs or a comparable data carrier (USB stick, hard disk) on
which the data for your product is located.
If you have purchased a download, all available data will be in your Best Service customer account.
RAR or ZIP files must be unpacked before use. To do this, first copy them all to your hard drive
(either from your purchased data carrier or as a download from your customer account) and then unpack them.
Please use only the following
recommended software to
unpack .rar files:
- WIN - http://www.7-zip.org
- MAC - http://www.keka.io
Bigger libraries are split into multiple .rar files (part1 – XX). After downloading all files, please unpack only the
first file of the split rar archive (e.g. Library-Name.part1.rar), all other files will be processed automatically. Also,
please be patient, this really can take some time!
Successfully unpacked?
If you successfully unpacked the library, you should see something like this:
(EXAMPLE) „The Example Library“, contains like most other Kontakt Player libraries all the important library data. In
this example, the folder contains a Documentation folder, the very important Instruments folder, the Samples folder
and finally the all deciding NICNT file.
Ideally you would place your Kontakt Player Library on a dedicated hard drive. If your computer however only
has one drive, we recommend placing the library here:
MAC: Users/Shared WIN: Users\Public
NATIVE ACCESS AND KONTAKT PLAYER INSTALLATION
If you already installed Native Access and Kontakt / Kontakt Player on your
machine you can skip the next step.
Native Access can be downloaded as part of the product downloads directly
from your Best Service account. After you have completed the installation and
logged in to Native Access, go to the „Available“ section where you can find and
install the latest Kontakt Player.
! The installation guide for Native Access 1 (Legacy) users can be found below.
Add a library to Native Access (2 or newer) and herewith to Kontakt Player
Please launch Native Access and log in with your
Native Instruments login data.
If you don't have a NATIVE ID yet, you can create one by clicking
"Sign up now" below the LOGIN button.
To add a new product to your Native Instruments account, click on
"Add Serial" in the lower left corner.
In the input field that appears, please enter your serial number and then
click on "ADD SERIAL".
After the serial number has been successfully registered, a window will open. Now please click on "Locate" and
select the previously extracted library folder on your hard disk in the following window. PLease click on "Confirm".
Complete installation
If everything has been done correctly, the library will be marked as "installed" and the library can now be used in
Kontakt Player.
Add a library to Native Access 1 (Legacy)
Please launch Native Access and log in with your
Native Instruments login data.
If you don't have a NATIVE ID yet, you can create one by clicking on
"Create a Native Instruments account" below the LOG IN button.
To add a new product to your Native Instruments account, click on
"Add a serial" in the upper left corner.
In the input field that appears, please enter your serial number and then
click on "ADD SERIAL".
After the serial number has been successfully registered, you will find your new product in the
"Not installed" section. Now please click on "ADD LIBRARY".
In the next window, click on “BROWSE”, and
select the previously extracted library folder on
your hard drive. After ensuring that the
destination folder is displayed correctly in
Native Access, please click on “INSTALL” to
complete the installation.
If everything was done correctly, the library will be marked as “INSTALLED”:
Have fun and success with your new library!
If any problems occur, please contact our Best Service support team: [email protected]
